AHT error gone after removing Boot Camp

Hi,
Recently I ran AHT on my 2011 27" iMac and got this error: 4MOT/4/40000003: HDD- 1229
The error relates to the HDD fan.
I ran the test 5 times and received the same error (last 4 digits change), so I have booked it in to my local AASP to be checked under Applecare.
I was preparing it for collection today and decided to remove my Boot Camp partition. Afterwards, I ran the AHT 3 times and now I'm getting "no problems found".
Is it likely that the Boot Camp partition was causing the error? If so, can I safetly dismiss it?
By the way, I'm an ACSP and I've gone through all the usual diagnostic proceedures.

It's strange that Windows causes that type of problems. However, I recommend you to take the Mac to the Apple Store so they can check your computer. Also, I recommend you to run Apple Hardware Test again, because it may not detect a hard drive problem

Similar Messages

Slow boot up after removing boot camp

I removed boot camp aftering realizing that I barely use it and hoping that the boot up time would be as quick as when I bought my mac a year ago. However, the boot up time is just as slow even after removing boot camp. I have gone into system preferences and chosen mac ox as the primary disk but nothing happens. Please help!

Check the setting in the Startup Disk pane of System Preferences.
(54095)

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

How to create extra partitions for windows 7 after installing boot camp

hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank you

Last login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

Trouble restarting Mac OS after using Boot Camp

I am using Mac OSx 10.6.8 and have Windows 7 on my Boot Camp. In probably 90 percent of the times I restart my Mac OS side after using Boot Camp, my computer freezes during the startup. I usually get to my desktop screen but my desktop icons don't fully load and it freezes, or if I try and open an application in my dock, I get the spinning ball of death and I have to restart.
A co-worker suggested opening in safe mode and then going to my preferences file and looking for any .plist file that appears corrupted and then deleting it before restarting. That usually works except for the times I can't find anything that looks corrupted. Also, there are times when it starts up and my dock is back to the computer's default setup. Sometimes my clock gets set to a different time as well.
On occasion, I've sometimes restarted as many as a dozen times before things kick in correctly.
I don't have any applications in the startup menu. This thing just has major problems restarting after using Boot Camp. (I have a co-worker with the same exact issue). It's a pain when I am in a hurry after using Boot Camp.
I don't have privileges to run disk utility or do anything similar so before I take it into my IT folks, I'm wondering if this is an issue with anyone else and if there is another solution.

sorry for digging up an old thread, but what was the problem?

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

Hello
I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
I made an image of it , then deleted win partition from utility disk , ( wrong idea )
I didn’t notice that boot camp could erase win partition , anyway I have tried several times , and always after reboot boot camp
I get the same
Missing operating system .
If I boot from dvd install win or if i boot from the boot win partition.
hd and partitions looks OK to utility disk
Any idea to fix the problem ?

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Lion forgets mouse settings after using boot camp on my 24" iMac. How do I retain the mouse speed setting?

Lion always forgets my mouse speed setting after using Boot Camp. How do I retain this info in Lion?

After I posted my question this thread showed up in the side bar. Too bad it didn't show up when I searched the forums prior to posting.
https://discussions.apple.com/thread/3242008?start=0&tstart=0

Folder with question mark on startup after using boot camp!!!

im getting a folder with a question mark on startup after using boot camp. it shows up for a second, then the apple logo pops up and OSX boots normally. i wouldnt be concerned except this folder with the question mark usually shows up when the computer cant find the startup disk or OS. so in fact what is happening is that my macbook cant find the startup disk for a second and then seems to find it. is anybody else having this problem. i dont like it and want to get rid of it. help!!

This is correct.
I wonder how it can be that in the System Preferences - Startup Disk - OS X volume can become "deselected" like it was... I had to re-highlight the OS X volume and all is well.
b
MBP & Mac Mini Mac OS X (10.4.6) http://www.therottenapple.net/phpbb

HT3986 i was trying to download windows 7 on mac book air 10.8.2.seems like i didnt copy my windos disk on the usb properly at the begining,so after the boot camp steps the screen is black and telle me to put the write disk.

i was trying to download windows 7 on mac book air 10.8.2.seems like i didnt copy my windos disk on the usb properly at the begining,so after the boot camp steps the screen is black and telle me to put the write disk.
eventually i made a coorect usb windows 7 and put it back to continue as it was saying so,but there is no change and the screen still is dark and says no bootable disk ,insert.
how to solve the problem?

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

Removing Boot Camp Components from Windows 7

Hi. I just got an Apple Keyboard with Numberpad. To make it fully work on my PC with Windows 7, I had to install Boot camp (I used my copy of OS X Snow Leopard). Once boot camp was installed, the media keys and volume keys started working perfectly as they would on a Mac, and the volume HUD also started displaying when I change the volume (looks good). But Boot camp also installed a bunch of other stuff, including drivers that I do not need, like iSight driver, bliuetooth, etc. It also replaced some of my own drivers, but that's not an issue yet. The question is, how can I remove boot camp assistant and its components that are useless to me? What to remove, and what not to remove? I just want full functionality of the keyboard, as I have it right now...
Thanks in advance.

Try restore to earlier would undo everything.
I'd go ahead and uninstall Boot Camp for sure.
Then Device Manager
You don't want Apple serivces and startup items - though Apple TimeServices checks the clock on every boot up.
MSCONFIG to disable any startupitem and services being loaded. But there should / might be one for keyboard.
From your OS X DVD, copy the contents to a folder on Windows and then look for kbmgr and move (copy and paste) to a new folder. You don't need any of the other things for motherboard, network, etc that you can rollback or uninstall in Device Manager.
Pick up Paragon Hard Drive Manager 2011 for an easy disk to disk OS clone for backup - you can boot from either hard drive w/o problem, just change the cable or the BIOS boot device.
Hard Disk Manager Suite 2011
I'm surprised that if Apple sells their keybaord for PCs that they don't include just a device driver, or that Windows didn't pick up on what to install automatically.

Removing Boot Camp Partition after now using Parallels

Is it possible to completely remove the boot camp partition (under Snow Leopard) without having to reformat the HD and reinstall everything? I don't need it now that I am using Parallels with an XP virtual machine installed on my OSX partition.

utahmac1 wrote:
I ran the assistant and did the restore. Now when my computer turns on I have to hold the option key to get to the mac log in. There isn't the windows boot up option any more. However it wont just boot up to Mac. Any ideas?
Once in OS X go to System Preferences - Startup Volume and set OSX to be the default.
On the next reboot ist should automatically boot into OSX.
Regards
Stefan

BSOD on restart after installing Boot Camp 4 Support Software

My install of Windows 7 Ultimate on a separate Boot Camp works until I try to install the Apple Boot Camp 4 Support Software. After I do so the system gives me BSOD on restart. I've tried the following suggestions from other threads:
- Renaming/removing AppleHSF.sys and AppleMNT.sys
- Removing BootCamp.exe from msconfig.exe
I've attached the error dumps associated with the BSOD, as well as a screen shot of the BSOD screen (see link below).
Windbg suggests that wininit.exe is likely causing the problem.
Any help would be greatly appreciated.
https://www.dropbox.com/s/f5do4y38y0be3s6/ErrorFiles.zip?dl=0

I do not know exsactly what your issue could be. My advice would be to try and F8 Windows into safe mode and try to run a Disc check on the Windows partition to see if their are errors that might be fixed. If you have the Windows DVD you can boot into that and run repair apps from that. You may just have a corupt boot config and its causing the BSOD. I have a 2011 Macbook and have similar problem with freeze ups on Windows 7. Mostly after it has to reboot after a update? All I can think of after looking at my Windows Events viewer was that a problem with a driver was most likely the cause. I unfortunately have Mountain Lion and have to use BootCamp 4. Personally I have never had a issue with BootCamp until 4.0 and Mountain Lion. In fact when I upgraded to Mountain Lion I did so without the BootCamp partition and then I added BootCamp back in after Mountain Lion upgrade. When I fist tried to install Windows 7 BootCamp never did start the Windows install corectly. All it did was boot back into OS X. That should have been my first hint that things would not go well

Manually Removing Boot Camp Software From Vista?

Hello!
I accidentally deployed Boot Camp to the wrong machine, installing it onto a desktop PC instead of a Mac running Windows. The machine is running Vista Home Premium SP1. Now when I try to uninstall it it won't uninstall. I was able to uninstall the drivers, but I can't get Boot Camp Services to remove. I was able to delete the Boot Camp folder from Program files to remove the taskbar app, but the Boot Camp Control Panel is still installed, as well as it's still showing up in add/remove programs.
Does anyone know what registry key I need to delete in order to remove the entry in add/remove programs, & where is the control panel file located so I can delete it? If I manually delete these two things, Boot Camp will successfully be uninstalled from this machine.
I know I made an ignoramis mistake, & wish I would have double-checked the machine before deployment.
Thanks!
Nathan Parker
President/CEO
Mallard Computer, Inc.

FIXED IT! After inserting my OS X CD, finagling around in Windows Update & Add/Remove Programs, IT'S GONE! All fixed now!
Now I just need to watch my deployment much more carefully.

Unable to boot OSX after failed Boot Camp XP installtion

I hope someone can help me please!
I used boot camp to partion 32GB and then inserted the XP cd as requested, my iMac restarted and XP began to install, it found 'unknown volume' c: and requested a NFTS format. This was all fine, however the installtion failed and enetered a constant failed/reinstall/fix cycle, after a few hours I rebooted the machine. I am not worried about the failed XP installation;
My problem is that on boot up now it does not boot into OSX, even when rebooting whilst holding the OPT key, it finds no bootable drives and just sits a the grey screen unless I put in the XP disk, which it will to install from.
Where has my OSX partiton gone?? Help please!

I've had nothing but problems with installations since 2 years ago when I got this iMac. When I had the problem before I got a new XP disc and no problems. This time I'ts not getting me into windows. There are different options when you choose to install windows: NTFS,FAT or leave partition with current files intact or something to that extent. I dont know what I should do. I tried "leave intact" and it formatted,installed windows, then went to black screen with error message saying "error reading disc". then i forced shut down the computer since it wouldnt read either keybord and the next time i choose to delete that partition(32gb) and install a fresh copy of windows on it with the "NTFS" option. same thing as before: formatted, installed, then black screen with error message saying "cant go into windows because of corrupt file "system file". This is a brand new copy of windows mind you so im a little peeved. I basically forced shut down again, and held down option and thank god it let me choose which partition to load into. im now on my mac partition. i set the startup to default to mac.

AHT error gone after removing Boot Camp

Similar Messages

Maybe you are looking for