Ai CS2 Suddenly don't start..!

Suddenly, Ai CS2 don't start, just launching the app gives the message "Could not complete requested operation" and quit.
Since 3 weeks ago I've been working on both CS2 and CS3 versions with no problems, and today CS2 don't wanna go...!
b I need CS2 because I make preseparated files that in CS3 don't work on my Harlequin Rip Station (another issue I have to solve soon)
I've deleted the CS2 preferences folder and the "com.adobe.illustrator.plist"
file with no results.
Now, under another user, both versions opens fine...
OsX 10.4.11 Brand new MacPro Dual core Intel, 5 Gb RAm....
any Idea, somebody whit the same situation?

It can be a corrupt font or a corrupt color profile.
Fonts are good suspects as in a new user certain fonts will not load especially if they are managed by a font manager.
Display and other colro profiles can get corrupt as well I would first look at the fonts, way to quickly find out if it is the problem is to deactivate them except for the system fonts.
Trash AA's Settingts folder again and see if all is well if so it is definitely the font. If not I would suspect the possible but rarely
the culprit color profile.

Similar Messages

Suddenly apps don't start or crash while starting: Possible reasons?

Hello,
from one minute to the next I've got massive problems with a lot of apps:
they don't start or crash while starting (resp. while executing a function).
I don't have any clue what could have happened. Last software-specific action
I did (half hour before the problems appeared) was to update the Flash player
(in the meantime I've removed it with App Cleaner).
Troubleshooting steps I've tried:
-- Start the Mac in Save Mode
-- Use Apple Hardware Test (no damage found)
-- Repair permissions
-- Check the volume with Disc Utiliy (no damage found)
I've also tried to use Onyx, but the app refuses my admin password
although it is valid and works.
The specs of my Mac:
-- Mac Mini Late 2012
-- Yosemite 10.10.2
-- RAM 16 GB 1600 MHz DDR3 (Samsung)
-- 500 GB SSD Samsung 840 EVO
The following excerpts are from the crash reports of some of the apps.
Is someone out there who understand them and can give me
informations about the possible reason for the crashes?
Thank you,
Thomas
Quark Xpress
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000022
Exception Type:        EXC_BAD_ACCESS (SIGBUS)
Exception Codes:       KERN_PROTECTION_FAILURE at 0x0000000007c7d8be
VM Regions Near 0x7c7d8be:
    VM_ALLOCATE            0000000007c48000-0000000007c4c000 [   16K] rw-/rwx SM=PRV
--> VM_ALLOCATE            0000000007c4c000-0000000007c94000 [ 288K] r--/r-- SM=SHM
    mapped file            0000000007c94000-0000000009308000 [ 22.5M] r--/r-x SM=ALI /usr/share/icu/icudt53l.dat
TextEdit
Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000
Application Specific Information:
libcoreservices: _dirhelper: 523: mkdir: path=/var/folders/qx/bf4yxqkj6gbd6d8lkm20h96c0000gn/T/com.apple.TextEdit/ modes[1]=0700: Permission denied
Could not obtain valid temporary directory for sandboxed app: Input/output error (5); returned size: 0
InDesign
Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Application Specific Information:
terminating with uncaught exception of type AdobePSL::Exception: std::exception
abort() called
Adobe Acrobat
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x00000000f10633ed
VM Regions Near 0xf10633ed:
    Stack                  00000000bffff000-00000000c0000000 [    4K] rw-/rwx SM=COW
-->
    Submap                 00000000ffff0000-00000000ffff1000 [    4K] r--/r-- SM=PRV process-only VM submap
Application Specific Information:
objc_msgSend() selector name: release
Preview
Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000
Application Specific Information:
libcoreservices: _dirhelper: 523: mkdir: path=/var/folders/qx/bf4yxqkj6gbd6d8lkm20h96c0000gn/T/com.apple.Preview/ modes[1]=0700: Permission denied
Could not obtain valid temporary directory for sandboxed app: Input/output error (5); returned size: 0
Application Specific Signatures:
_libsecinit_setup_sandbox():confstr(_CS_DARWIN_USER_TEMP_DIR...)

Thanks for your replies!
$ java -version
java version "1.5.0_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_07-164)
Java HotSpot(TM) Client VM (build 1.5.0_07-87, mixed mode, sharing)
All other programs written at the time do run without problems if they don't use a JMenu. The two that do don't run anymore. I already did reinstall Java, didn't help.

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up.

My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up the computer.
Sometimes it beeps after freezing, and keeps beeping forever until I shut down the computer by pressing the power button.
Other times the screen gets a little darker and a text appears saying I need to turn off the computer by pressing the power button and restart, but after restarting the computer freezes again. Each time I turn it on it takes only a few minutes to freeze it seams, about 2-3 minutes or less, and occasionaly it doesn´t even start up.
I don´t recall the exact version of the operating system, its MacOSX (10.6 or something)
Any sollutions?

Three beeps is usually indicative of a RAM problem. Take out one RAM chip and see what happens and then swap with the other one. See if there is a difference. Also engage the Apple hardware test and see if that offers any useful information.
Ciao.

My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
You can move the
com.apple.systempreferences.plist
file out of your Users/Library/Preferences folder to the desktop and reboot.
then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
(trash the file on the desktop if no ill issues occur later on)
or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509
I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

After IOS 8 upgrade IPad 2 don't start

Hi,
After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

My ipad2 is having the same problem. I can get it to start up by plugging the charger in. I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

WEB.SHOW_DOCUMENT don´t start Firefox 3.5

Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
Thomas

Hi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas

Oracle 8.1.7 on windows 2000 don't start automatic :(

Why Oracle 8.1.7 don't start automatic on windows 2000 :(
Services
Oracleora3Agent
Oracleora3DataGatherer
Oracleora3TNSListener
OracleServiceORA3
are started autamatic. (ora3 is SID)
if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

I've got the same problem.
However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
i.e NET START OracleServiceXXX
Hope this helps.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

Downloaded songs don't start at the beginning of the song, why?

the songs i bought from itunes don't start at the beginning of the song, it's just the preview clip.

Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

My IPOD keeps repeating the song. I've had it for almost a year and it has been fine. All of a sudden it has started repeating. Help!

I've had my ipod nano for almost a year. It has worked fine. All of a sudden it has started to repeat. I've tried everything. Help!

It's pretty easy to accidentally set the Nano to repeat. Have a look at the manual (download the manual here) on page 21.

Java Apps don't start automaticaly after system restart

Hi,
Since a few days ago when restarting Java application servers of SAP
Portal, the applications deployed don't start for itselfs.
When starting the instance, the memory stops to increase at 500mb. The
only way to start the applications is by the manual way in:
Server -> Services -> Deploy -> Runtime -> Application -> Start
Application.
After starting the applications manually the instance starts fine.
I already increased some values in global configuration:
From:
InitialThreadCount = 40
MaxThreadCount = 150
MinThreadCount = 40
To:
InitialThreadCount = 80
MaxThreadCount = 200
MinThreadCount = 80
After the restart the applications are not starting automaticaly yet.
I have 4 instances. The first two instances are starting fine, but the problem is happening with the other 2 instances.
Is there any reason for this type of behavior?
Thanks for the help
Pedro Nunes

Hello Vyara,
thanks for your reply.
This kind of problem happens since 3 weeks ago and the stack of this system (SP09) remain unchangeble since 07.04.2008.
The strange behavior is that the Server 1 and 2 are starting all the apps fine, but this problem is only happens in server 3 and 4.
Can you help please?
Thanks

9iAS Release 2 (some) components don't start

Component that don't start (Forms, DAS, ...)
In oidmon.log is ...
2002/12/06:12:11:34Failed to fetch Process Table. ORA-12571: TNS:packet writer failure
2002/12/06:12:11:34Error connecting database. 12571
2002/12/06:12:11:34Error : Guardian Process terminated
2002/12/06:12:13:03NLS_LANG set to SLOVENIAN_SLOVENIA.EE8MSWIN1250
2002/12/06:12:13:03Resetting NLS_LANG to SLOVENIAN_SLOVENIA.UTF8
2002/12/06:12:13:03Starting Monitor Process, PID=1260
2002/12/06:12:13:03ORACLE_SID not set, setting to iasdb
2002/12/06:12:13:52[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:13:52[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:13[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:13[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:33[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:33[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:54OIDLDAPD Instance 1 is not running....
2002/12/06:12:14:57OIDLDAPD Instance 1 deleted from registry
2002/12/06:12:14:57Restarting OIDLDAPD Instance 1
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58Updated Retry Count
2002/12/06:12:14:58OIDLDAPD Instance 1 added into registry
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58exit run
Are this errors cause for not starting components, and how can I correct this ?
thanks

I could be wrong but...
1) Is the TNS listener running? (and then a DB instance)
2) Is the default SID (iasdb) correct? You might like to set the sid before you start.
3) I had loads of problems after I accidentally tried starting emctl as root. I changed the ownership of everything back to oracle:dba and then started it as oracle and all was well.
Maybe useful, maybe not?

[Solved] Libreoffice 3.6.1.4 don't start

Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)

Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

Ai CS2 Suddenly don't start..!

Similar Messages

Maybe you are looking for