Ai files not importing correctly

I made a type file (with a stroke) and a 3.4 rule line in Indesign, imported it into ai and created outlines. When I reimported into indesign (as ai file) it showed up fine on screen but when I printed the line was missing, and the stroked type had lost it's middle in most but not all of the letters and was printing transparent with a stroke. I replaced the line with a box and it still didn't show up. It looked this way in the PDF too. I'm using white type.
I'm having this problem with other white ai files. How can I fix and why aren't they compatible?Running CS3 on 10.4.11

The white is set to overprint. Go back to Illustrator and fix it there.
Bob

Similar Messages

RAW files not importing correctly into iPhoto

I'm having problems importing .CR2 files into iPhoto. This didn't used to happen with Tiger, so I'm trying to figure out what the issue is. I'm using iPhoto 7.1.1 (354) with Leopard 10.5.1. I previously had 10.4.8.
I'm wondering if it's an issue with networking. Currently, my iPhoto Library is on a NAS because it's big (about 86GB) and I have RAID redundancy on the NAS. The original files are fine, but the imported files (not just the thumbnails) are corrupted. If there's a problem with data transmission, would that show as a data corruption?

Michael
I don't have a NAS myself and my ignorance of it and networking one is pretty much total. However, this thread
http://discussions.apple.com/thread.jspa?threadID=1100543&tstart=0
records a discovery by one user using a similar system. It has to do with iPhoto using ':' for temp files and folders, and Samba having a problem with the character.
Hope that helps.
Regards
TD

Layered PSD files not importing correctly

Hey all,
I'm working on an animation, and I'm trying to animate some text layed out in a specific way in a .psd document. I export the psd to the desktop with the layers box checked, and I keep "maximize compatibility" on. When I quick-look the file or re-open it, it appears correctly. However, when I import it into FCPX (v. 10.0.6) all of the text, which is black, shows up as just a black image. When I drag the file into the timeline the layers separate as they should and have the correct titles, but they appear black. In the original document it was black text on a transparent background. I never had this problem in FCP7, it's new to FCPX. Why is this happening and how can I fix it?
Thanks in advance!

Is the PSD 8-bit RGB? Was it made on a Mac or PC? Are each of the layers rasterized or in bitmapped form?

Corrupted Frame files not importing correctly to RoboHelp and can't save MIF as FM

Hi,
I have Adobe Technical Communication Suite 3.0, which has FrameMaker 10.0.2.249 in it.
I created a user guide in FrameMaker, some of the chapters for which I imported from Word, and little bits of text here and there of which I copied and pasted from Word.
a) When I created a RoboHelp project and imported the Frame files, a little bit of content disappeared. A sentence here, a bulleted item there, not all the content I copied and pasted.
b) I thought I would save the Frame files as .MIF and then reopen them in Frame to get rid of any corruption. They saved as .MIF just fine and they open again with Frame just fine. However, when I try to Save As .FM, I get the message that .MIF cannot be saved as .FM.
I checked the extension in the Save As box and it has no mention of .MIF.
What to do? Any suggestions either for a) or b)?

This is a bug in the Save As dialog. If the filename is yourfile.FM, you
can choose MIF as the filetype in the Save as Type box, FrameMaker
changes the filename to yourfile.mif and saves as mif.
But, for some reason, if you have a filename of yourfile.MIF and choose
FM in the Save as Type dialog box, you get that error message and the
save doesn't happen. The workaround is to delete the MIF extension in
the filename. Then the save works fine and the file is renamed with an
FM extension.
In other words, saving FM to MIF works as expected. FrameMaker renames
the file extension and saves in the new format. But, in a MIF to FM
save, FrameMaker refused to rename the MIF extension. (Maybe there is a
reason for this?) You have to delete the extension or the save won't happen.
I'm going to report this as a bug.
Mike Wickham

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

File not formatted correctly error

Dear All,
when am trying to import a contract file as excel sheet, not CVs file, i get the error ( File not formatted correctly ). any advice?

the issue with date formatting would be corrected in Excel. When an export file that includes dates is opened in Excel, they get reformatted by the Excel program. In my experience, I have had to reformat those cells in Excel to the YYYY-MM-DD format and save the Excel file before I could import again into CM. But, if you are just exporting and then importing without opening the file in Excel, then the dates are not the problem. What are you exporting from CM? Are you trying to import into a different project or database than you exported from?

Canon 5D MK II white balance set as K does not import correctly

With a 5D II and the Kelvin white balance set in the camera the WB does not import correctly for RAW files and LR 2.4. For example when set to a specified white balance as a Kelvin setting, for example 5200, and then import the raw files with "As Shot" specified or subsequently WB to "As Shot" in Develop module the white balance is set to 4850 +1 (in the example of 5200). The pre set WB options provided inthe camera do work correctly.
Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
Thank you.

Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
Lightroom does work correctly. The numbers are different, but the appearance ot the colour temperature matches. The way I understand it, cameras don't actually store Kelvin numbers, but store colour space co-ordinates instead. LR and your Canon are interpreting the RAW values into different colour spaces, so the kelvin values and tint numbers will differ.
Hal

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

PDF's not importing correctly

I am using CS5 on iMac 27" quad.
I am trying to import a PDF into Photoshop.
But it is not importing correctly.
The PDF is a label template, which prints perfectly from the PDF.
But when I import it into Photoshop, the dimensions change.
So the text boxes for the labels don't align up correctly to the label sheet.
The top label is OK, but the boxes keep moving to the right, so that top label in column 5 is a 1/4" off to the right. The labels seem to be "traveling."
Vertically, the same thing is happening.
Row #1 is OK
but by the end of the page, Row #5 is 3/8" off the page.
I have disabled all printing options: no auto-center; no fit to page; no scaling.
The printer software should not be adapting the document at all.

Here are two articles to start with...don't know what you've tried so far
iTunes Does Not Recognize Audio CDs
You Can Not Import Or Play Music From an Audio CD in iTunes

HELP....AVCHD / MPEG files not playing correctly!

I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively! I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on a standard timeline. Can anyone suggest anything to help please? Much appreciated!

Thanks for your reply, I ran it through Media Info. Here are the results:
Container & general information:
MPEG-PS: 290 Mib 4min22s
1 Video stream: MPEG video
1 Audio stream: AC-3
First Video Stream:
8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
First Audio Stream:
256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
Please let me know where to go from here. Thanks so much!
Date: Fri, 11 Nov 2011 10:50:15 -0700
From: [email protected]
To: [email protected]
Subject: HELP....AVCHD / MPEG files not playing correctly!
    Re: HELP....AVCHD / MPEG files not playing correctly!
    created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Files not imported because they could not be read. L5.3 on Mac from SD card in reader RAW photos

Files not imported because they could not be read. L5.3 on Mac from SD card in reader RAW photos and video visible when card inserted but not able to import. Any ideas on how to resolve this issue?

This message means that you don't have permission to write to the destination folder or disk drive. This is an operating system issue that can be resolved by changing permissions. And you can get plenty of information on how to do that by doing a web search for "change disk permissions".

.m4a Not Importing Correctly

For some reason when I import some .m4a files, they do not appear in my libary. Some albums will import while others will not. files with .mp3 import correctly, this is only a problem with .m4a files
Any ideas? Most of my music is stored as .m4a
Thanks

iTunes does not automatically encode/transcode files that you add to your library. The importing settings that you mention only apply to CDs that you rip & encode and other audio files that you want to manually convert to those specifications.

Date video was created is not importing correctly

I have a large library of iMovie HD video files that I am wanting to consolidate into iMovie 7.1.4 using File:Import iMovie HD Project...from the menu bar of iMovie. When the clips from each file are imported, the time codes show that each clip was created on the date that the clip was originally imported from my video camera into iMovie HD, not the date the clip was actually captured on the camera. When I look at the original iMovie HD file, it shows the correct date and time for each clip, so I know that the information is in the file somewhere. How do I get the new iMovie to register the correct capture date and not the imported date?

How do I get the new iMovie to register the correct capture date and not the imported date?
Use the "A Better Finder Attributes" (or similar) utility to change the "File Creation Date" to any DTG (Date-Time Group) you want.)

VCF/vCard not importing correctly

This is odd. I have hundreds of vCards and most of them imported correctly into Address Book. But some are dropping many of the phone numbers. The following vCard only imports the NYC number (ending in 3350) and leaves all the others out. But the really odd thing is that if I try to import it again, Address Book shows me ALL the info in the duplicates message/action window. But if I import it, again, it only keeps the NYC number. Entourage imports it correctly, as does the Palm Desktop on my PC.
BEGIN:VCARD
VERSION:2.1
ORG:Bed, Bath & Beyond
ADR;WORK:;;620 Sixth Avenue b/w 17th & 18th;New York;NY;10011
NOTE;ENCODING=QUOTED-PRINTABLE:r230HW 800 watt .8 99=0D=0Ar552s 1 cu ft 129
TEL;WORK:617-536-1090 landmark
TEL;WORK:508-879-7182 natick
TEL;WORK:212-255-3550
TEL;WORK:212-367-8815
END:VCARD

ccscambridge.org wrote:
Well, that completely stinks! I guess I could do the import in Leopard (10.5, I have a laptop still running that) and then just move the address book files to my 10.6 machine? Anyone know how to do that?
yes, that's possible. import in leopard, quit address book and Mail on both computers and copy the entire folder /users/username/library/application support/address book from the 10.5 computer to the corresponding location on the 10.6 one. start address book there and it will have the same content as the one on the 10.5 machine.
Thanks for the info. I wish I knew this a few weeks ago when I did the migration. What a pain it will be fixing this!

Theme and Template not importing correctly

I have exported the theme and template file. At the import site the template and theme did not install correctly.
I can see that it is using the same theme as the source environment, but it will not appear.
Any ideas?

You've got two issues going on.
One- never put anything besides the .dwt template files in
the Templates
folder.
Also- the paths need to work IN the template.
The images aren't showing here:
http://www.und.edu/dept/art/Templates/MAIN.dwt
So dw is making wrong paths to them in the child pages.
Use the "browse to file" dialog box to pick the images.
And if any of them are in the Templates folder, use the Dw
files panel to
move them.
Second issue:
Your dw "site" is defined to a subfolder of the domain,
/dept/art/ as far as
i can guess. But you've used site root relative paths in the
Template. Site
root relative paths start with a leading /slash. It tells the
browser to
start from the domain name's root level.
Only use Document Relative paths if the site is defined to a
subfolder of a
domain. (look for the pulldown in the bottom of the browse to
file dialog
box)
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Ai files not importing correctly

Similar Messages

Maybe you are looking for