Ai preview in Windows 7 Explorer

How can I preview an Ai file in Windows 7 Explorer? I am able to view previews of .jpg files just fine, but no Ai, .psd, .esp, etc....
Thanks

Thank you for your replies An Elephant, and Mylenium. I have been using Bridge, but I thought there may have been another way to work with Windows Explorer (without going third party). Thanks again.

Similar Messages

No pdf thumbnail preview in Windows XP Explorer

I have searched and tried many different fixes to this issue and have had no luck in finding a solution.
I have over 700 PC's that due to a huge security flaw is forcing me to upgrade from our current version of Adobe Reader 8.1.0 to the 'fixed' version of 9.1.3.
Due to the huge number of PC's I have this all being done with automated scripts. The issue is not with the deployment, but the funcationality of PDF thumbnails.
Once upgraded, the PCs can no longer see a thumbnail view of the PDF's.
Let me start with the method of upgrade.
- I began with creating and admin install of Reader 9.1
- I then applied patch 9.1.2 to that admin install.
- After that I then applied the 9.1.3 patch as well.
- Using the -r option I created an answer file (setup.iss) file for the install.
- I then pushed the installation silently to all the machines.
I thought that this was simply due to the fact that they were upgraded, meaning that the 9.1.3 install had to first remove 8.1.0 and it may not have been done cleanly. However, I ran the same install on a PC that had NO Adobe products on it whatsoever and yet it still has the same issue even though it is a 'clean' install.
Things I have tried.
- I have tried uninstalling and re-installing the package.
- I have tried re-creating the Admin Image and re-installing it.
- I have tried associating PDFs with notepad, then back to Adobe Reader.
- I have re-registered the pdfshell.dll file.
- I have run the Repair Installation utility.
My guess is that there has to be a simple registry entry or .dlll file that is causing this.

I have the same issue, currently running acro 9.3 and reader 9.3 under vista pro - I tried de/reinstalling reader but it did not help any. Its a pity there is no support or even any correspondence by acrobat - this forum has more than ten threads dealing with this.
Kind regards,
Aurel

Thumbnail previews in Windows Explorer (Windows 7 64bit)

Is there a way to enable thumbnail previews under Windows Explorer for Acrobat X Pro? I just installed the trial and these are missing.
I know there was a bug in Acrobat 9 which required a third party hack to fix. I had hoped by now this would work correctly. Has this still not been fixed?
Thanks.

Lol. Adobe has known about this stupid problem for about 4 years. Since Vista x64 started gaining popularity. Acrobat 8.x was the first version where people really started scratching their heads wondering why & when the problem would be fixed. Then came Acrobat 9. And now "X". Still not fixed, well, I'm sure next year we'll have Acrobat 11, so keep holding your breath.

WebUI Smartform Preview - blank window in IE9, works in Chrome (partly)

Hi there,
I am seeing an issue with Order Print Preview of PDF(Smartform) in WebUI, wondering if anyone had similar issue.
Have a smartform configured to 'Preview Output' under SPPFCADM->CRM_ORDER.
It has been working fine for a long time (years) in all systems. I now need to make a change to the form.
It still works fine in Prod. system but in Development system if I 'Preview Output' in Internet Explorer 9, it gives me a completely blank Pop-up.
No error message.
I checked other posts, checked in SICF (Active, Handler is correct), checked notes - no luck.
I debugged the form and CRM_ORDER_EXEC_SMART_FORM, there are no errors given.
then I tried in Chrome browser - the Pop-up works (partly) - I can see the PDF form in a small window that opens, but when I try to make window bigger the actual form stays small but I can scroll up and down to see it.
I have changed some settings in IE9 (Compatibility etc.) but with no effect.
This worked fine a few months ago!
Any ideas?
thanks,
David

This link:
[http://www.michaels.com/Crocheted-Hooded-Bear-and-Flower-Baby-Blankets/25280a,default,pd.html?printpreview=true http://www.michaels.com/Crocheted-Hooded-Bear-and-Flower-Baby-Blankets/25280a,default,pd.html?printpreview=true]
Attached is an image of the prints next to each other.

Bridge(CS3) conflict with Windows file explorer

Bridge will crash on me at least twice a day. I use Bridge and Windows file explorer simultaneously copying and moving files across a network. When Bridge quits I sometimes lose my network connection and have a lot of trouble re-connecting.
I have done the usual delete preference, trash cache etc., nothing seems to be working.

Not sure what is going on there, but have a suggestion. You are increasing your odds of Bridge crashing, and trashing the cache, if you move too fast. When in Bridge wait for the spinning arrow in lower left corner to stop (it is building the thumbs) before changing folders.
Don't see any correlation between network connection and Bridge crashing. Perhaps if you have a slow computer you are overloading it with tasks and it can not keep up. Minimize programs running at same time.
Also, run task manager and see what the processor is doing. If CPU useage goes up markedly that will confirm the problem.

How Do I Convert Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview and Back Without Reinstalling Windows?

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu

1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

How can I get Windows Internet explorer on my MacBook air?

I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.

Or install Parallels 7 and then you can run IE just like any other app from within OS X itself. That costs around $50 plus the Windows license though.
Personally I have created an IE9 RDP (remote) App on my terminal server at work and just run that. Looks like it is running on my Mac natively.

Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp

Hi
when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
Any inputs are welcome

Hello Bala,
Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
Regards,
Vishwas.

Windows 7 Explorer Crashes every time. Anyone Help?

Over the last 2 weeks I have been experiencing a very frustrating problem with Windows 7 Explorer. Below is an excerpt of the message from the Event viewer:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
cannot be delivered through this filter until the problem is corrected.
Here is an excerpt from Application log in event viewer:
Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aeba271
Faulting module name: msdaipp.dll, version: 11.0.6715.60, time stamp: 0x4330617e
Exception code: 0xc00000fd
Fault offset: 0x000229a5
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
I have found "older" messages that provided fixes ranging from update the nVidia driver to remove registry settings. Has anyone else experienced this issue? Could this be some type of Trojan? I have run several scans using Trend Micro Internet
Security pro and shows up nothing.
Any assistance would be greatly appreciated.

Hallo Andre
Could you please check this dump. On one PC in domain explorer.exe crashed one or two time in a week. I've done different steps to isolate this problem (Delete and recreate user profile, replace MB and PC, .... ) but without succes.
https://docs.google.com/file/d/0B-lqs7eMSLTXeVIycE5yTHh4aUE/edit?usp=sharing
Hier is an error in eventlog (sorry - it's in Dutch). Many thanks in advance. Ravil
Logboeknaam:
Application
Bron:
Application Error
Datum:
2/05/2013 13:35:10
Gebeurtenis-id:1000
Taakcategorie: (100)
Niveau:
Fout
Trefwoorden:   Klassiek
Gebruiker:     n.v.t.
Computer:
CONSULT2013-TMP.oranv.local
Beschrijving:
Naam van toepassing met fout: Explorer.EXE, versie: 6.1.7601.17567, tijdstempel: 0x4d6727a7
Naam van module met fout: msvcrt.dll, versie: 7.0.7601.17744, tijdstempel: 0x4eeaf722
Uitzonderingscode: 0x40000015
Foutoffset: 0x0005620a
Id van proces met fout: 0xe58
Starttijd van toepassing met fout: 0x01ce40c39c2f7ef4
Pad naar toepassing met fout: C:\Windows\Explorer.EXE
Pad naar module met fout: C:\Windows\system32\msvcrt.dll
Rapport-id: 58756ab2-b31c-11e2-b633-001999a21090
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
   <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-02T11:35:10.000000000Z" />
    <EventRecordID>4228</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CONSULT2013-TMP.oranv.local</Computer>
    <Security />
</System>
<EventData>
    <Data>Explorer.EXE</Data>
    <Data>6.1.7601.17567</Data>
    <Data>4d6727a7</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeaf722</Data>
    <Data>40000015</Data>
    <Data>0005620a</Data>
    <Data>e58</Data>
    <Data>01ce40c39c2f7ef4</Data>
    <Data>C:\Windows\Explorer.EXE</Data>
    <Data>C:\Windows\system32\msvcrt.dll</Data>
    <Data>58756ab2-b31c-11e2-b633-001999a21090</Data>
</EventData>
</Event>

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

Question about Windows File Explorer and offline attribute display

In previous releases of Windows (including Windows 8), Windows File Explorer would display a small "x" icon if the offline file attribute was set. In Windows 8.1, Windows File Explorer no longer displays the "x" icon if the offline
file attribute is set. Is there a reason this behavior was changed? Is there an option to get the old behavior of displaying the "x" icon?

Hello Ed Winn,
What ‘x’ icon do you mean?
Please share us the screenshots to compare.
Based on my test, I can’t find the ‘x’ icon in the offline folder both in Windows 7 and Windows 8.1.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Opening New Window or Explorer

Hi Everybody,
My scenario is like this I have one Webdynpro application which contains two Views , First View contains one Link (LinkToAction) when ever I clicks on that link Second View Should open in New Internet Explorer means new Window,
For this I have created 2 Windows which is having first/second view.
Following Code is there
      IWDWindowInfo windowInfo = (IWDWindowInfo) wdComponentAPI
           .getComponentInfo().findInWindows("SecondWindow");
           IWDWindow window = wdComponentAPI.getWindowManager().createWindow(windowInfo,true);
           window.setWindowPosition(300, 150);
           window.show();
          //     Save WindowInstance in Context
           wdContext.currentPopupElement().setWindowInstance(window);
But still its opening same Window or explorer.
I tried with this method also.
IWDWindow window = wdComponentAPI.getWindowManager()
.createModalWindow(windowInfo);
Still it is not opening New Window.
Please help me out by opening New Window.
Thanks in advance.
AW

Hi Adam willams,
FIRST OPTION
The sample webdynpro url is like this:
http://<hostname>:<port no>/webdynpro/dispatcher/*******/<Application Name>
In the above URL, only hostname and portnumber may change if you switch to different server. So, in the code, if we are calling any application using the URL, we need to get the hostname and portnumber dynamically so that, even if we switch to different server our URL will work.
try {
        InetAddress addr = InetAddress.getLocalHost();
        // Get IP Address
        byte[] ipAddr = addr.getAddress();
        // Get hostname
        String hostname = addr.getHostName();
    } catch (UnknownHostException e) {
store the host name and portnumber in variables and form the URL
String URL = "http://"hostname":"port"/webdynpro/dispatcher/....../<YourApplicationName>"
SECOND OPTION
Following is the way to do it
http://localhost:50000/webdynpro/dispatcher/demo.sap.com/firstapp/FirstApp?ToSecondView=yes
Here the parameter name is ToSecondView and the value for it is yes
To read this from Webdynpro use
//value will hold the value yes from the url.
String value = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("ToSecondView");
Now, in the view init() write the above code.
If value contains yes then you have to navigate to view 2 immediatley. If not be in the same view only.
Suppose if you access the url directly, you will see the view1.
If you want to open view2 in the pop up window, call the URL, http://localhost:50000/webdynpro/dispatcher/demo.sap.com/firstapp/FirstApp?ToSecondView=yes.
In the opened window, it will show view2.
Regards,
VJR.

I deleted firefox because of malware; I want to reload it, windows or explorer blocks it before begins; I tried the forum, but when I click on a link I get spammed: I am using Trend Micro Titatanium, but it doesn't seem to be working, can you help me?

I deleted firefox because of malware;I want to reload it but windows or explorer blocks it. I tried the forum but when I click on a link I get spammed. Can you help?

You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Ai preview in Windows 7 Explorer

Similar Messages

Maybe you are looking for