AI Start and Error -10609

Hi
I'm running SCXI 1100 and 1126 modules in a SCXI 1001 rack, on a windows 2000 SP3 PC using a 6052E NI DAQ card, LV 6.1 and the latest NIDAQ.
I am trying to configure, in parallel, the AI aquisitions for the 1100 (AI) and the 1126 (frequency)modules, both at the same scan rate, but whenever the second AI Start is run I receive the Error -10609, Transfer in progress error. They each have a seperate group number at AI Config and the AI configs generate seperate Task ID's for them. I configure both, then try to start both.
Effectively I suppose I'm trying to start the card twice I imagine. AI start is the only problem, and can't currently see a way round it. The shipped examples run either one or the other, and work fine (naturally
enough).
Many thanks for any help.

This cannot be done with two AI Starts trying to run buffered acquisitions on the same SCXI chassis.
You will need to combine your channels into one acquisition to perform this function.
The SCXI multiplexes all input channels in its slots to one channel, and that channel is then routed to a single channel on your 6052E MIO card. Therefore, by trying to run two separate buffered acquisitions, you are trying to add channels to the multiplexing while the multiplexer is running, which results in an error.
Mark

Similar Messages

  • When starting computer, multiple DIAdem attempted startups (5 copies try to start) and errors.

    When starting computer, multiple startups of DIAdem clog the boot up process (5 copies try to start) and error messages state "Data Finder cannot start due to an internal error  (100): invalid config  STORE! USIF  error MSG:"     I did not ask  or want DIAdem to autostart but it sure wants to.  WHY?  Any help here? 

    Helllo Brad (and Matthias),
    I have  been using the tool Matthias recommended and it is indeed a very useful program.  It looks like I can stop it from doing the autostart.  However, I did not intentionally cause DIAdem to autostart and do not know how this happened.  (I must have done it since no one else messes with my laptop.) 
    A bit of historical info.  I originally used a demo disk of ver 10.0 and then used the activation code after purchasing.  I started having trouble with auto start and decided to upgrade to version 10.2 hoping ver 10.0 would  be deleted and all troubles would be gone.  No such luck.  I now have both versions and need to remove ver 10.0.  However, the control panel and 'add or remove programs' only finds one Nat Inst program (and it doesn't identify version). 
    Manually starting ver 10.0, generates an error message: "cannot open data store "MydataFinder"
    Manually starting ver 10.2 generates an error message: ""data finder cannot start due to an internal error (100) invalid config etc."
    In  spite of error messages, the programs seem to generally  work fine.  I am in the process of using the program recommended by Matthias to eliminate startup issues. I am also considering uninstalling and re-installing but am uncertain of which version will be uninstalled since only one program is identified.
    After I send this, I'm going to do a restart and see if problem with multiple restarts has been eliminated.
    Thanks for all your  help.
    David F

  • Service 'iPod Service' failed to start and Error 1503

    Thanks to all the people who have provided answers posts... they have helped me get to this point!...
    I have a slight variation on this issue - an Error 1503...
    My original symptom was that I couldn't get iTunes to recognise my iPod so I tried to install 7.2.0.35... and right at the end I got the message about "iPod service failed to start check your permissions"...
    I use AVG Free 7.5.472, Sygate Personal Firewall 5.6 and Spybot Search and Destroy 1.4, but for the install I have used msconfig to shut down everything other than iTunes and QuickTime...
    When I run services.msc I get 2 versions of iPod Service listed - one as "iPod Service" and the other as"iPodService" (i.e. no space between iPod and Service)... the "iPodService" is started but the "iPod Service" is not and when I try to start it I get a message "Could not start the iPod Service service on Local Computer. Error 1503: The service did not respond to the start or control request in a timely fashion"
    Would appreciate any assistance!...
    Many thanks in advance...

    I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
    First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
    2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
    3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
    I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

  • My hp mini using factory image and error cod 0xef0003

    hp mini laptop   notebook model  hp mini 311-1000.........prodact number..VT116PA#ABG      its windows 7  I WAS TRIN TO BACK UP  ....but   icant restor or backup ...its  black screen to start and   error cod ......0xef0003  and  when i try to back up it says  contact hp assistant   the recovery is using factory image .....

    Don't know if this will be of use or not but having had a problem with using the system recovery  failed at 85 persent with unable to restore factory image i used the back up disks that to failed infact it wiped the restore partiion i then i ordered a recovery kit from HP thinking my recovery disk three was corrupt,
    It tells you in the HP book to only leave your mouse key board and screen connected as i don't give in THIS TIME I LEFT MY ROUTER CONNECTED AND HEY I RECOVERED MY SYSTEM so in my case i should not of removed the router.

  • My itunes won't work so i tried reinstalling and when it starts an error pops up that says: "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the insta

    my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
    "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
    please help, its frustrating

    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
           next download itunes. it worked for me hope this is helpful!!
        oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    Maybe this.
    Fix iPhone Apps Stuck "Waiting" During Installation
    Try update the apps one at a time

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I have followed the Apple Support instructions I did it 3 times and this message always appear: "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion... Please!

    I have followed the Apple Support instructions but these 2 errors always appear: "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?

    Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
    (99331)

  • How to reset firefox without openning the firefox as after repeated installation it fails to start and gives error message " Your Firefox profile cannot be load

    "Your Firefox profile cannot be loaded. It may be missing or inaccessible."
    I dont know why this message has appeared. i have tried uninstalling and reinstalling firefox after completely deleting all files and folders of mozilla from program files and registry.Despite of that firefox will not start and keep giving error message. i can not reset firefox without openning firefox.Profile does not open in window search.
    On openning app data profile manually there is nothing much i can do as it shows [General]
    StartWithLastProfile=1
    [Profile0]
    Name=default
    IsRelative=1
    Path=Profiles/2tt76737.default
    how shall i fix and restore firefox as i am desperate please , please help....

    Does that Profiles/2tt76737.default still exist?
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • PS5 starts the error message unexpected / unexplained problem and quits

    PS% starts, then error message "unexpected problem" then PS% quits.
    Computer = MacBook Pro, 2011 model, 2.3 GHz Intel, 4 GB memory
    have not used PS5 for about two years,
    when I initially tried to open, received message that I needed to load JAVA for OSX 2014-001.  Did that
    PS5 is ver. 12.1x200110328 r. 145
    Help.  No chat service available.
    pat

    Please clarify:  do you really mean the over a decade-old, archaic, obsolete Photoshop 5.x, or are you referencing Photoshop CS5?
    If the latter, please don't refer to it as "PS5".  Are you sure you are trying to start Photoshop in 64-bit mode?  Photoshop CS5 is the only Mac version that ever offered a choice between 32-bit and 64-bit modes.
    In 32-bit mode, Photoshop CS5 can only have access to a very limited amount of RAM.
    Your 4 GB of RAM are very, very little RAM these days.  You don't even mention the exact version of your OS.
    Also, give machine details:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

  • Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

    Hi There,
    I'm getting the errors below and but I have not got any BSOD.
    The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
    This is what the logs files says about each error.
    Pku2ulog:
    Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
    p2plog:
    Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
    negolog:
    Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
    idlistenlog:
    Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
    homegrouplog:
    Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
    However, the 'Unknown(xx)' number changes times to times.
    Could you help me please?
    Thank you very much for your attention.
    Best Regards.

    Hi,
    If you have Home group set up, please go to Control Panel – Network and Sharing Center. Choose homegroup and sharing options and click “Leave the homegroup”.
    Juke Chou
    TechNet Community Support

Maybe you are looking for