Ai: Why not assign ctrl+R !!!???? Key CTRL is ignored. - (topic is reloaded)

The PROBLEM is realy simple.
On my keyboard there is additional ctrl key and I would like to use it as shortcut e.x. ctrl+R = STAR tools. and many other e.x.....
Ai is just profesional tool. I use shortcuts to make it more productive and that's all.
"Why in Ai not assign ctrl+R !!!???? Key CTRL is ignored. i'm using Apple Keyboard 2007. "
Why so simple things aren't been done in the version CS >>> 3 <<< ! ?.

sorry Guys...
With respect for your work but I guess members of Ai team are funs of "oldmobil club".
There is many of these 'old school flowers' in Ai.
Why Illustrator so sticks out from other applications in minus?
It seems that one engineer dosn't know what doing other engineer in next apllications in "suite".
I regret when I have to buy the next Ai versions when they are only alteraions CS1, CS1.2, CS1.3... but they aren't surly In my opinion they aren't deserve new version.
Ohhh I'm so tired of use.
I would like to buy once a two years newer and expensiver version but elaborated one

Similar Messages

  • Posting Key Not Assigned to Account Key

    Hi SAP SD Gurus
    I am getting a remark that
    Posting Keys has not been assigned to Account Key ZCD
    This account key ZCD has been assigned to a condition type ZCUD in my pricing procedure.Not the Accounting document is getting getting released in VF02
    Please guide as soon as possible.
    Urgent Requirement
    Satish Kullu

    Hi SAtish,
    Note that The GL account is assigned to this ERL (account key) in VKOA .
    Also please refer builing block to know detailed configuration.
    http://help.sap.com/bestpractices/BBLibrary/documentation/Q70_BB_ConfigGuide_EN_ZH.doc
    Hope this helps,
    Please assign points as way to say thanks

  • Why not Restore Ctrl-Leftclick Link to Open in New Tab?

    Between versions 22 and 24, ctrl-leftclick went away as a keyboard accelerator to open a link in a new tab.
    Now there are two ways: rightclick the link and pick a munu item to open in new tab, or middleclick the link.
    Rightclick and choose menu item is more difficult, as it requires actually looking at and reading the menu.
    Middleclick is not as easy or reliable for most people today since the middle mouse button is usually a wheel and difficult to click with any precision.
    I can see no reason why you shouldn't restore Ctrl-Leftclick to open a link in a new tab and lots of reasons why you should. Will you please do so?

    Yes, this is caused by their click tracking script. When you hover over a link, it looks normal, but:
    &lt;a href="http://www.cbsnews.com/8301-250_162-57607188/no-deal-yet-government-shutdown-debt-limit-talks-continue/" '''onclick="return lc_trackclick(event,'9848', 'No+Deal+Yet%3A+Talks+Continue');"'''>No Deal Yet: Talks Continue&lt;/a>
    We've seen another site with this issue in the past, but it only affected a few links at the bottom of the page so it wasn't as annoying.
    Besides the two workarounds you're using (right-click, middle-click), you could strip those click trackers. Three possible approaches:
    (1) Find an extension that works on that site
    (2) Remove the tracking manually using a bookmarklet (a script you save to your Bookmarks Toolbar as a button)
    (3) Remove the tracking automatically using a userscript (a script that runs in the Greasemonkey extension or the Scriptish extension)
    Since anti-tracking extensions are pretty common now, you might check those. Please note that if they aren't coded carefully, they could stop links on some sites from working correctly.
    If you decide you're interested in a more tailored solution, you could request a userscript to be developed on this forum: [http://userscripts.org/forums/2 Ideas and script requests - Userscripts.org]. Please note that the site does NOT check scripts before they are posted, and takes forever to remove bad ones, so protect your personal information by not installing anything that touches Facebook and cast a skeptical eye on reviews.

  • Why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done.

    why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work

    Hello there, bobbiefromIRL.
    The following Knowledge Base article goes over some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Key combination Shift+Alt+Cmd+D does not work in Indesign CC, why not?

    Key combination Shift+Alt+Cmd+D does not work in Indesign CC, why not?

    Is it assigned to something in the shortcut set you are using?

  • Show blank texts instead of key or 'not assigned' in query-result

    Hi,
    is there a way / workaround to
    1. suppress # / 'not assigned' in query results?
    or
    2. show blank texts (if maintained) instead of the key
        (when showing texts for a characteristic in a query all characteristics with blank texts - none or ' ' -
         will show the key instead of the blan text) ?
    Thanks,
    Christoph

    Hi Christoph,
    there have been several posts concerning this topic. As Saad told there is no direct way within SAP standard to reach this aim.
    Depending on the Front-End Tools you are using these posts may help:
    Not assigned and # in BEX 7.0 WAD
    how to set field to blank if the data is # or unassigned
    Brgds,
    Marcel

  • Why can't I assign CMD F7 key to macros?

    I use a product called iKey to create all sorts of macros. I have noticed that with both my iBooks (Late 2004 and Mid 2005) I cannot assign any macro to cmd F7, or Option F7, or Cntl F7, etc. (Fn F7 works fine.) Can anyone tell me whether there is something special about the F7 key?

    By the way, this isn't an iKey thing. If I go to the Keyboard & Mouse preference pane in Tiger and select the Keyboard Shortcuts tab, it too will not allow the assignment of any key combination involving F7 except for Fn F7. This is beginning to drive me nuts!
    Dave Burbank

  • When i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    hello,
    I had the same issue. This is what I was told to do.
    iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
    Appcleaner   will do this and its free.
    The following procedure has helped solve many issues with Keynote:
    1  Close Keynote then use Appcleaner
    2  Empty the Trash
    3  Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
              allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
    4  restart the Mac
    5  Reinstall iWork
    6  Repair permissions:
              Applications > Utilities > Disk Utility > First  Aid:   click on your system disc in the drive column
              and select Repair  Disk Permissions
    7  open Keynote and test

  • Why we should not assign WHT Code for Payment in Vendor Master

    HI
    I have doubt re WHT.  When WHT Types for Invoice and Payment are assigned in Vendor Master, Why Its suggested to maintain WHT Code only for Invoice, why not for Payment. Pls clarify my doubt.
    Thanks

    Dear
    It all depends upon the situation.  Sometimes we may pay advance to the vendor.  At that time, if we need to deduct tds then we need to incorporate payment tax code in the vendor master.  Sometimes we may do either fb60/MIRO and at that time we need to deduct tax then we need to incorporate invoice tax code in the vendor master. 
    There might be different orders on the same vendor and there might be different areas operating the same vendor for invoice booking/payment.  In such situations, we need to maintain both invoice tax code and payment tax code in the vendor master since tds need to be deducted at the time of invoice booking or payment to vendor whichever is earlier.
    When first advance payment is made  to the vendor and when tds amount is deducted, then at the time of making MIRO we need to remove invoice tax codes so that tds is not deducted twice.
    Hope the above clarifies.
    Regds

  • If the table cell can not receive a virtual key?

    Hello,
    Want to execuate a "copy/paste" function in the table control. I hope type the "Ctrl+c" to copy  text in a cell, but nothing to do with the "ctrl" key pressed.
    David

    Table can receive and trap Ctrl + someCharacter in keypress event: you can discriminate the keys pressed with this code:
    if (event == EVENT_KEYPRESS) {
    if (GetKeyPressEventModifiers (eventData2) == VAL_MENUKEY_MODIFIER) {
    sprintf (msg, "Ctrl + %c pressed.", GetKeyPressEventCharacter (eventData2));
    MessagePopup ("Notice", msg);
    else if (event == EVENT_VAL_CHANGED)
    MessagePopup ("Notice", "Cell value changed.");
    Unfortunately, if the table is in edit mode Ctrl-C and Ctrl+V appear to be trapped by the system at low level and not to be passed to the control callback. Within CVI you can trap EVENT_VAL_CHANGED event, but I see no way to discriminate between a user type-in and a paste operation except for trapping whether a previous keypress event was received, which can be a troubled way to go. I can't see a way to trap Ctrl+C.
    There may be a method to get those event using some windows API but I don't know it.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • When creating a table why should we give promary key

    when creating a table why should we give promary key

    Hi Rambabu,
    Primary key is needed so as to avoid duplicate entries and ensure that there are unique entries in the table.
    For some applications, it is useful to uniquely identify the rows in a table by one or more columns so that you can process them in a specified sequence, for example. You can do this by assigning a “primary key.” The column names that are to create the table key are represented by the keywords PRIMARY KEY. The input values of the key columns defined in this way must not be a NULL value.
    You can use the primary key to insert rows in a table in the same way as you insert rows in a base table when no primary key is defined. However, the system outputs an error message if you attempt to insert an existing value into the primary key column a second time, since the uniqueness of the column is ensured by defining the primary key.
    A primary key can consist of multiple columns. However, it is unusual for a key to be constructed from more than five columns, since this makes it difficult for users to enter unique values. The arrangement of the columns behind the keywords PRIMARY KEY defines the key sequence.
    Regards,
    Sekhar

  • GL should not shown in NOT ASSIGNED node in T-Code: F.01

    Dear Gurus,
    My user don't want to show few GLs in FSV (i.e., in T-Code: F.01), that too in Non Assigned Node also.
    Is there any setting for the same?
    Regards
    JS

    There is no setting for that.  The only way that I can think of is to put them in the G/L account exclusion list in the selection screen of F.01.  Click on Multiple Selection icon next to G/L account from to fields and paste those accounts in Exclude Single Values tab.  To get the list of accounts under not assigned node, execute T Code OB58, highlight the financial statement version and click on Fin.statement items button.  Now click on Check (Ctrl+F5) icon and carry out the checks to get the list of not assigned accounts at the chart of accounts level or for a specific company code.
    Tip:  You can create a selection variant for F.01 with the excluded accounts, so you do not have to do this everytime you run F.01.

  • Costing Variant not assigned to Number Range Group

    Hi,
    I have an error while doing Sales order costing. When i create Sales order and do costing for it (Ctrl+F7) it give me an error,
    "Costing variant XYZ is not assigned to a number range group"
    Where do i need to assign the costing variant to a number range group.
    Please advise.
    Thanks in Advance,
    Safi

    Hi Ramana,
    Thanks for the reply.
    I have mainted the number rnages in VN01.The issue still persists.
    Safi

  • Items in project report(query) are listed under the "not assigned" (column)

    Hi All,
    Items in project reports (query) are listed under the "not assigned" (column name) Why it is so ?
    Start query : project reports & ask for period April 2008 (Period from/to). .
    You will see items listed under  Not assigned WBS Element (column name)
    If you choose for a period of April until June 2008 then you see more items under u201Cnot assignedu201D .
    Items should be under Assigned (column name) & not under the Not assigned (column name )
    Any suggestions highly appreciable.
    Thanks.

    Hi,
    How are you displaying the ITEM field in the BEx query designer? Is it displayed with "Key and Text"? If so and if the text is not loaded for this master, this may happen.
    Regards,
    Yogesh.

  • In-House Cash: Sender Bank Not assigned to a Bank area IHC007

    Hi Friends,
    I am setting up In-house Cash Payments and have the above error.
    I am able to Create and finally post Internal payment order using IHC1IP
    Out bound PAYEXT Idoc from the sector is successfully sent out and is inbound with the above error.
    I Have checked the Bank Key settings. Bank key and the Bank number are unique
    Following are the values
    1) Bank Country: NL
    2) Bank Key: IHC1
    3) Bank number: IHC1
    I get an error "Sender Bank "NL" is not assigned to a Bank area" Message no: IHC007.
    Not sure why the bank is being Identified as "NL" instead of "IHC1"
    A help in this reagrd would be highly appreciated.
    Thanks & Best Regards,
    M. Naveen Kumar

    Hi M. Naveen Kumar,
    This behavior could be caused by a bug identified and correct by SAP Note 1561448. You can implement it in your system and perform a new test. After applying it, non-Geman countries, as NL, should work as expected and the idoc should go through.
    Kind Regards,
    Carolina

Maybe you are looking for