AIA Details required for begginer

Hi ,
I am new to AIA , i have bit knowledge on ESB and BPEL , Could you some can guide what is the best way to learn AIA ?
Tutorials and Installations process ...
Thanks in Advance
Sudhee

Hi Sudhee,
I would suggest you to go through the below link
http://www.oracle.com/technetwork/middleware/foundation-pack/learnmore/default-345261.html
This link contains the documentation as well as the samples of AIA Fusion Order Demo. This will definelty help u in understanding the concepts of AIA easier.
Thanks.

Similar Messages

Table details required for pegged requirements

Dear All,
I have the following scenario.
One child components is required for three different header materials. After MRP run, In MD04, three diffenerent planned orders will be there for child component for three reservations of three Header materials. I want to see the immediate header level of the child component through tables for report purpose. If you see through the function module MD_PEGGING or MD_PEGGING_NODIALOG, it is showing the top most header material. But it is not showing the immediate header material for the child component planned order. Please guide me to get the immediate header material through table or function module or any.
Thanks in advance.
Vijay.

Check these tables.
MDTB,PLAF.

Details required for ssl certificate

Hi
u r going to be implement ssl on WEBAS. For this is it requires client certificates for ssl for the webbrowser .So if is it requires to renew.
regards...

Hi All,
got an answer from SAP Support and ICM restart isn't requrired anymore since >= NetWeaver 710.
Please see SAP Note 510007 - Setting up SSL on Web Application Server ABAP under:
When, as of NetWeaver 710, you save or overwrite an SSL PSE, STRUST signals the PSE change to the icman, whereby the PSEs used for SSL are reloaded at runtime. Existing communication connections are not impaired as a result. However, all SSL session caches are emptied in icman so that all new SSL connections go through a complete SSL Handshake. On servers with a very large number of simultaneous connections, this could lead to an increase in the CPU load and increased response times.
You are able to see respective information's as well at ICM trace.
Regards,
Jochen

Pricing Details Required for Sales order Item

Hi Gurus,
I have a requirement to get pricing details of sales order line item to be displayed on smart form.
Please let me know the tables which i need to refer to get the pricing details. Please let me know how I can link those tables from VBAK or VBAP.
OR
Please let me know if there is any function modules to get the pricing details of sales order header / item
Regards
Avi

Hi,
Check with the below table
Table : VBRK, VBRP, VBFA, KONV tables.
In VBRK and VBRP you can link with VBELN field. In VBFA table you can link with VBELV fireld.
Regards
Thiru

Grant details required for user and schema

Hi
I have Oracle version - 10.2.0.4.0
We have Schema A (Lot of objects exist) and User B (No objects exist - acts as application user to access objects in other schema).
I have listed below doubts.
1) I want to know the method to find the list of users have access to objects in Schema A and privileges granted for the objects in Schema A
2) I want to know the method to find the list of grants provided to the schema objects to the user B

user1368801 wrote:
Thanks ajallen.
It really helped me.
one more question. I think DBA_TAB_PRIVS gives details for tables only right.
What about other objects like procedures, views etc. Go back to the Reference Manual and re-read the description of DBA_TAB_PRIVS. Re-read the specific description of TABLE_NAME.
>
Actually I am exporting 3 schemas (A,B,C) from production and importing them to test environment (A1, B1,C1) using fromuser and touser option.
Now I have to properly remap all the privileges, grants, synonyms etc.
There are so many objects and I am wondering how to remap properly.
It may be simple, as a newbie, your direction will be more helpful

The credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!, the credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!

after feeding in the correct details of my credit card and password, there still are some issues for which im not able to use the app's
kindly explain as to how to get out of this issue

i tried once again to get through but after i filll in the details of the credit card the expiry date and the password and all other details and press the continue option , it show an error on the top right hand side of the page which is "your paymant method was declined please enter valid payment method information'.

Details required for these terms

Hi All,
can any body explain these terms in detail.
Main Attributes on item master window
i. Primary
ii. Tracking => - primary
- primary & secondary
iii. Pricing => - same as above.
iv. secondary => Defaulting
any response will be highly appreciated.
Regards
Asad

I think you might wany another forum. This is about portal specific topics, and yours looks like it's ERP functional.

Requirements for IDOC

Hi friends,
Could you please tell me the details required for doign a IDOC scenario.
I want the details seperately when IDOC is a sender and also when IDOC is a receiver.
Note: High reward points for the reply

HI
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Idoc creation
IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
You can get the all description from below tcodes
WE60-> Documentation for IDoc types
WE09-> Search for IDocs by Content
BD87-> Status Monitor for ALE Messages
WE63 -- information about Standard IDOC in R/3
WE64 - Details about process codes
WE82, WE30, WE31 -- IDOC Types.
SAP R/3
R/3 to XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
XI to R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1) ( Create port to get IDOC Meta data from sender system)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) (To maintain IDOC Metadata, it is needed by XI because XI needs to construct IDOC-XML from IDOC. It is not needed by any sap system).
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
Details ABT IDOC??????
1)Use WE60 transaction.
2)you need list of basic type idocs then use t.code WE60.
To display IDOC list in particular time intervel use we02 or we05.
where u can find the outbound and inbound processing idoc's.
use t.code 'wedi' to get more information on idoc's.
3)You can use the WE60 for Idoc Documentation
& we can use WE30 for Idocs list
Refer the below links for furtehr assistance
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
cheers

How to extract OHC_C21 detail step required FOR THIS

how to extract OHC_C21 detail step required FOR THIS

Hi Deba,
Check the following URL
http://help.sap.com/saphelp_nw70/helpdata/en/ba/a3463c9c9ffc3ae10000000a114084/frameset.htm
Regards,
Tom

PDF required for How to Extend User Details

Hi All,
I have just started with KM. I would like to have a few tutorials. Please provide links for the same.
Also, I am foll. the pdf "How to Extend User Details" for adding the expert area property to UME. However, I find that the pdf is for EP 6.0. I am working on EP 7.0.Can someone provide me with the relevant pdf for EP 7.0
Regards
Nikhil Bansal

<u>How to Extend User details</u>
for this you can use this link.. this will really helpful to you..
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/KM/Extending_User_Details.pdf
<u>Knowledge Management</u>
http://www.wm-forum.org/files/Handbuch/An_Illustrated_Guide_to_Knowledge_Management.pdf
reward me points...

List of Manual Setup required for iSetup to work

Hi All,
This is Mugunthan from iSetup development. Based on my interaction with customers and Oracle functional experts, I had documented list of manual setups that are required for smooth loading of selection sets. I am sharing the same. Please let me know if I anyone had to enter some manual setup while using iSetup.
Understanding iSetup
iSetup is a tool to migrate and report on your configuration data. Various engineering teams from Oracle develop the APIs/Programs, which migrates the data across EBS instances. Hence all your data is validated for all business cases and data consistency is guarantied. It requires good amount of setup functional knowledge and bit of technical knowledge to use this tool.
Prerequisite setup for Instance Mapping to work
·     ATG patch set level should be same across all EBS instances.
·     Copy DBC files of each other EBS instances participating in migration under $FND_SECURE directory (refer note below for details).
·     Edit sqlnet.ora to allow connection between DB instacnes(tcp.invited_nodes=(<source>,<central>))
·     Make sure that same user name with iSetup responsibility exists in all EBS instances participating in migration.
Note:- iSetup tool is capable of connecting to multiple EBS instances. To do so, it uses dbc file information available under $FND_SECURE directory. Let us consider three instances A, B & C, where A is central instance, B is source instance and C is target instances. After copying the dbc file on all nodes, $FND_SECURE directory would look like this on each machine.
A => A.dbc, B.dbc, C.dbc
B => A.dbc, B.dbc
C => A.dbc, C.dbc
Prerequisite for registering Interface and creating Custom Selection Set
iSetup super role is mandatory to register and create custom selection set. It is not sufficient if you register API on central/source instance alone. You must register the API on all instances participating in migration/reporting.
Understanding how to access/share extracts across instances
Sharing iSetup artifacts
·     Only the exact same user can access extracts, transforms, or reports across different instances.
·     The “Download” capability offers a way to share extracts, transforms, and loads.
Implications for Extract/Load Management
·     Option 1: Same owner across all instances
·     Option 2: Same owner in Dev, Test, UAT, etc – but not Production
o     Extract/Load operations in non-Production instances
o     Once thoroughly tested and ready to load into Production, download to desktop and upload into Production
·     Option 3: Download and upload into each instance
Security Considerations
·     iSetup does not use SSH to connect between instances. It uses Concurrent Manager framework to lunch concurrent programs on source and target instances.
·     iSetup does not write password to any files or tables.
·     It uses JDBC connectivity obtained through standard AOL security layer
Common Incorrect Setups
·     Failure to complete/verify all of the steps in “Mapping instances”
·     DBC file should be copied again if EBS instance has been refreshed or autoconfig is run.
·     Custom interfaces should be registered in all EBS instances. Registering it on Central/Source is not sufficient.
·     Standard Concurrent Manager should up for picking up iSetup concurrent requests.
·     iSetup financial and SCM modules are supported from 12.0.4 onwards.
·     iSetup is not certified on RAC. However, you may still work with iSetup if you could copy the DBC file on all nodes with the same name as it had been registered through Instance Mapping screen.
Installed Languages
iSetup has limitations where it cannot Load or Report if the number and type of installed languages and DB Charset are different between Central, Source and Target instances. If your case is so, there is a workaround. Download the extract zip file to desktop and unzip it. Edit AZ_Prevalidator_1.xml to match your target instance language and DB Charset. Zip it back and upload to iSetup repository. Now, you would be able to load to target instance. You must ensure that this would not corrupt data in DB. This is considered as customization and any data issue coming out this modification is not supported.
Custom Applications
Application data is the prerequisite for the most of the Application Object Library setups such as Menus, Responsibility, and Concurrent programs. iSetup does not migrate Custom Applications as of now. So, if you have created any custom application on source instance, please manually create them on the target instance before moving Application Object Library (AOL) data.
General Foundation Selection Set
Setup objects in General foundation selection set supports filtering i.e. ability to extract specific setups. Since most of the AOL setup data such as Menus, Responsibilities and Request Groups are shipped by Oracle itself, it does not make sense to migrate all of them to target instance since they would be available on target instance. Hence, it is strongly recommended to extract only those setup objects, which are edited/added, by you to target instance. This improves the performance. iSetup uses FNDLOAD (seed data loader) to migrate most of the AOL Setups. The default behavior of FNDLOAD is given below.
Case 1 – Shipped by Oracle (Seed Data)
FNDLOAD checks last_update_date and last_updated_by columns to update a record. If it is shipped by Oracle, the default owner of the record would be Oracle and it would skip these records, which are identical. So, it won’t change last_update_by or last_updated_date columns.
Case 2 – Shipped by Oracle and customized by you
If a record were customized in source instance, then it would update the record based on last_update_date column. If the last_update_date in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Case 3 – Created and maintained by customers
If a record were newly added/edited in source instance by you, then it would update the record based on last_update_date column. If the last_update_date of the record in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Profiles
HR: Business Group => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
HR: Security Profile => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
MO: Operating Unit => Set the Operating Unit name for which you would like to extract data from source instance. After loading Operating Unit onto the target instance, make sure that this profile option is set if required.
Navigation path to do the above setup:
System Administrator -> Profile -> System.
Query for the above profiles and set the values accordingly.
Descriptive & Key Flex Fields
You must compile and freeze the flex field values before extracting using iSetup.
Otherwise, it would result in partial migration of data. Please verify that all the data been extracted by reporting on your extract before loading to ensure data consistency.
You can load the KFF/DFF data to target instance even the structures in both source as well as target instances are different only in the below cases.
Case 1:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1, Loc2, Loc3 (Mandate), Loc4, Loc5 and Loc6
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3, Loc4, then locations will be loaded to target instance without any issue. If you do not provide value for Loc3, then API will fail, as Loc3 is a mandatory field.
Case 2:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1 (Mandate), Loc2
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3 and Loc4 and load data to target instance, API will fail as Loc3 and Loc4 are not there in target instance.
It is always recommended that KFF/DFF structure should be same for both source as well as target instances.
Concurrent Programs and Request Groups
Concurrent program API migrates the program definition(Definition + Parameters + Executable) only. It does not migrate physical executable files under APPL_TOP. Please use custom solution to migrate executable files. Load Concurrent Programs prior to loading Request Groups. Otherwise, associated concurrent program meta-data will not be moved even through the Request Group extract contains associated Concurrent Program definition.
Locations - Geographies
If you have any custom Geographies, iSetup does not have any API to migrate this setup. Enter them manually before loading Locations API.
Currencies Types
iSetup does not have API to migrate Currency types. Enter them manually on target instance after loading Currency API.
GL Fiscal Super user--> setup--> Currencies --> rates -- > types
Associating an Employee details to an User
The extract process does not capture employee details associated with users. So, after loading the employee data successfully on the target instance, you have to configure them again on target instance.
Accounting Setup
Make sure that all Accounting Setups that you wish to migrate are in status “Complete”. In progress or not-completed Accounting Setups would not be migrated successfully.
Note: Currently iSetup does not migrate Sub-Ledger Accounting methods (SLA). Oracle supports some default SLA methods such as Standard Accrual and Standard Cash. You may make use of these two. If you want to use your own SLA method then you need to manually create it on target instances because iSetup does not have API to migrate SLA. If a Primary Ledger associated with Secondary Ledgers using different Chart of Accounts, then mapping rules should be defined in the target instance manually. Mapping rule name should match with XML tag “SlCoaMappingName”. After that you would be able to load Accounting Setup to target instance.
Organization API - Product Foundation Selection Set
All Organizations which are defined in HR module will be extracted by this API. This API will not extract Inventory Organization, Business Group. To migrate Inventory Organization, you have to use Inventory Organization API under Discrete Mfg. and Distribution Selection Set. To extract Business Group, you should use Business Group API.
Inventory Organization API - Discrete Mfg & Distribution Selection Set
Inventory Organization API will extract Inventory Organization information only. You should use Inventory Parameters API to move parameters such as Accounting Information. Inventory Organization API Supports Update which means that you can update existing header level attributes of Inventory Organization on the target instance. Inventory Parameters API does not support update. To update Inventory Parameters, use Inventory Parameters Update API.
We have a known issue where Inventory Organization API migrates non process enabled organization only. If your inventory organization is process enabled, then you can migrate them by a simple workaround. Download the extract zip file to desktop and unzip it. Navigate to Organization XML and edit the XML tag <ProcessEnabledFlag>Y</ProcessEnabledFlag> to <ProcessEnabledFlag>N</ProcessEnabledFlag>. Zip it back the extract and upload to target instance. You can load the extract now. After successful completion of load, you can manually enable the flag through Form UI. We are working on this issue and update you once patch is released to metalink.
Freight Carriers API - Product Foundation Selection Set
Freight Carriers API in Product Foundation selection set requires Inventory Organization and Organization Parameters as prerequisite setup. These two APIs are available under Discrete Mfg. and Distribution Selection Set. Also,Freight Carriers API is available under Discrete Mfg and Distribution Selection Set with name Carriers, Methods, Carrier-ModeServ,Carrier-Org. So, use Discrete Mfg selection set to load Freight Carriers. In next rollup release Freight Carriers API would be removed from Product Foundation Selection Set.
Organization Structure Selection Set
It is highly recommended to set filter and extract and load data related to one Business Group at a time. For example, setup objects such as Locations, Legal Entities,Operating Units,Organizations and Organization Structure Versions support filter by Business Group. So, set the filter for a specific Business Group and then extract and load the data to target instance.
List of mandatory iSetup Fwk patches*
8352532:R12.AZ.A - 1OFF:12.0.6: Ignore invalid Java identifier or Unicode identifier characters from the extracted data
8424285:R12.AZ.A - 1OFF:12.0.6:Framework Support to validate records from details to master during load
7608712:R12.AZ.A - 1OFF:12.0.4:ISETUP DOES NOT MIGRATE SYSTEM PROFILE VALUES
List of mandatory API/functional patches*
8441573:R12.FND.A - 1OFF:12.0.4: FNDLOAD DOWNLOAD COMMAND IS INSERTING EXTRA SPACE AFTER A NEWLINE CHARACTER
7413966:R12.PER.A - MIGRATION ISSUES
8445446:R12.GL.A - Consolidated Patch for iSetup Fixes
7502698:R12.GL.A - Not able to Load Accounting Setup API Data to target instance.
Appendix_
How to read logs
·     Logs are very important to diagnose and troubleshoot iSetup issues. Logs contain both functional and technical errors.
·     To find the log, navigate to View Detail screens of Extracts/ Transforms/Loads/Standard/Comparison Reports and click on View Log button to view the log.
·     Generic Loader (FNDLOAD or Seed data loader) logs are not printed as a part of main log. To view actual log, you have to take the request_id specified in the concurrent log and search for the same in Forms Request Search Window in the instance where the request was launched.
·     Functional errors are mainly due to
o     Missing prerequisite data – You did not load one more perquisite API before loading the current API. Example, trying to load “Accounting Setup” without loading “Chart of Accounts” would result in this kind of error.
o     Business validation failure – Setup is incorrect as per business rule. Example, Start data cannot be greater than end date.
o     API does not support Update Records – If the there is a matching record in the target instance and If the API does not support update, then you would get this kind of errors.
o     You unselected Update Records while launching load - If the there is a matching record in the target instance and If you do not select Update Records, then you would get this kind of errors.
Example – business validation failure
o     VONAME = Branches PLSQL; KEY = BANKNAME = 'AIBC‘
o     BRANCHNAME = 'AIBC'
o     EXCEPTION = Please provide a unique combination of bank number, bank branch number, and country combination. The 020, 26042, KA combination already exists.
Example – business validation failure
o     Tokens: VONAME = Banks PLSQL
o     BANKNAME = 'OLD_ROYAL BANK OF MY INDIA'
o     EXCEPTION = End date cannot be earlier than the start date
Example – missing prerequisite data.
o     VONAME = Operating Unit; KEY = Name = 'CAN OU'
o     Group Name = 'Setup Business Group'
o     ; EXCEPTION = Message not found. Application: PER, Message Name: HR_ORG_SOB_NOT_FOUND (Set of books not found for ‘Setup Business Group’)
Example – technical or fwk error
o     OAException: System Error: Procedure at Step 40
o     Cause: The procedure has created an error at Step 40.
o     Action: Contact your system administrator quoting the procedure and Step 40.
Example – technical or fwk error
o     Number of installed languages on source and target does not match.
Edited by: Mugunthan on Apr 24, 2009 2:45 PM
Edited by: Mugunthan on Apr 29, 2009 10:31 AM
Edited by: Mugunthan on Apr 30, 2009 10:15 AM
Edited by: Mugunthan on Apr 30, 2009 1:22 PM
Edited by: Mugunthan on Apr 30, 2009 1:28 PM
Edited by: Mugunthan on May 13, 2009 1:01 PM

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

If Excise invoice required for finished goods.

Hi All
I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
Can you advise please.
Regards
Mukta

HI
Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with 'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
Run time error is saying -
Short text
    Structure-type conflict when calling a FORM
What happened?
    Error in the ABAP Application Program
    The current ABAP program "J_1IRUTZ" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Can some one suggest if we need to apply any OSS NOTE.
Regards
Mukta

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

Lync 2013 certificate requirements for multiple SIP domains

Hi All,
I am engaged with a client in respect of a Lync 2013 implementation initially as a conferencing platform with a view to enabling EV functions (inc. PSTN conferencing) in the future. They initially need to support 30 SIP domains and eventually
around 100 SIP domains which is proving to be either not possible or severely cost prohibitive. Their current certificate provider, Thawte, can only support up to 25 SANs and have quoted them 5 figures. We tend to use GeoTrust as they are cheaper but they
appear to have a limit of 25 SANs. GoDaddy appear to support up to 100 SANs for a pretty reasonable cost. My questions are as follows:
Is there a way that I’m missing of reducing the number of SANs required on the Edge server?
Use aliases for access edge FQDNs - Supported by desktop client but not by other devices so not really workable
Don’t support XMPP federation therefore removing the need for domain name FQDNs for each SIP domain
Is there a way that I’m missing of reducing the number of SANs required on the Reverse Proxy server?
Friendly URL option 3 from this page:
http://technet.microsoft.com/en-us/library/gg398287.aspx
Client auto-configuration:
i.
Don’t support mobile client auto-configuration in which case no lyncdiscover.sipdomain1.com DNS records or SANs would be required.
ii.
Support mobile client auto-configuration over HTTP only in which case CNAME records are required for each SIP domain (lyncdiscover.sipdomain1.com, etc. pointing to lyncdiscover.designateddomain.com) but no SANs are required.
iii.
Support mobile client auto-configuration over HTTPS in which case DNS records are required for each SIP domain and a SAN entry for each SIP domains is also required. This is because a DNS CNAME to another domain is not supported over
HTTPS.
If the answer to 1 and/or 2 is no, are there certificate providers that support over 100 SANs?
How do certificate requirements differ when using the Lync 2013 hosting pack? I would think that this issue is something that a hosting provider would need to overcome.
Would the Lync 2013 Hosting Pack work for this customer? The customer uses SPLA licensing so I think is eligible to use the hosting pack but not 100% sure it will work in their environment given that client connections are supposed
to all come through the Edge where their tenants will be internal and also given the requirement for an ACP for PSTN conferencing.
Many thanks,

Many thanks for the response.
I was already planning to use option 3 from the below page for simple URLs to cut down on SAN requirement.
http://technet.microsoft.com/en-us/library/gg398287.aspx
What are the security concerns for publishing autodiscover over port 80? I.e. Is this only used for the initial download of the discovery record and then HTTPS is used for authentication? This seems to be the case from the following note on the below page:
http://technet.microsoft.com/en-gb/library/hh690030.aspx
Mobile device clients do not support multiple Secure Sockets Layer (SSL) certificates from different domains. Therefore, CNAME redirection to different domains is not supported over HTTPS. For example, a DNS CNAME record for lyncdiscover.contoso.com that redirects
to an address of director.contoso.net is not supported over HTTPS.
In such a topology, a mobile device client needs to use HTTP for the first request, so that the CNAME redirection is resolved over HTTP. Subsequent requests then use HTTPS. To support this scenario, you need to configure your reverse proxy with a web publishing
rule for port 80 (HTTP).
For details, see "To create a web publishing rule for port 80" in Configuring the Reverse Proxy for Mobility. CNAME redirection to the same domain is supported over HTTPS. In this case, the destination domain's certificate covers the originating
domain.”
I don’t think SRV records for additional SIP domain access edge is a workable solution as this is not supported by some devices.
As per the below article:
http://blog.schertz.name/2012/07/lync-edge-server-best-practices/
“The recommended approach for external client Automatic Sign-In when supporting multiple SIP domains is to include a unique Access Edge FQDN for each domain name in the SAN field. This is no longer a requirement (it was in OCS) as it is possible to
create a DNS Service Locator Record (SRV) for each additional SIP domain yet have them all point back to the same original FQDN for the Access Edge service (e.g. sip.mslync.net).
This approach will trigger a security alert in Windows Lync clients which can be accepted by the user, but some other clients and devices are unable to connect when the Automatic Sign-In process returns a pair of SRV and Host (A) records which do not share
the same domain namespace. Thus it is still best practice to define a unique FQDN for each additional SIP domain and include that hostname in the external Edge certificate’s SAN field”.
===================
1. Basically the requirement is to initially provide Lync conferencing services (minus PSTN conferencing) to internal, external, federated and anonymous participants with a view to providing PSTN conferencing and therefore enterprise voice services later.
2. The customer currently supports close to 100 SMTP domains and wants to align their SIP domains with these existing domains. The structure of their business is such that “XXX IT Services” provide the IT infrastructure for a collection of companies who
fall under the XXX umbrella but are very much run as individual entities.
Question:
Would you agree that I’m going to need a SAN for every SIP domain’s access edge FQDN?
Thanks.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

AIA Details required for begginer

Similar Messages

Maybe you are looking for