AIA error email : The composite instance link in the email doesn't work

The error messages raised through email contain the link to the composite instance which upon clicking is
supposed (after login) to show the composite instance in the EM. This link is not working for clustered environment whereas it works fine for non-clustered environment
(after submitting login credential the page is again redirected to login page)
Please let me know, if anyone knows the solution .
AIAEHNotification.xml resides in server path /u01/middleware/aia/instances/aia/AIAMetaData/config

Hi,
Verify that the link in your AIAEHNotification.xml is as under.
- soa_domain is the name of my domain, you can replace this with your domain name
- SOA_Cluster is the name of our SOA cluster
*http://<BIGIP hostname>/em/faces/ai/soa/messageFlow?target=/Farm_soa_domain/soa_domain/SOA_Cluster/#@#PROPS.{compositeName}#@#+[#@#PROPS.{compositeRevision}#@#]%26type=oracle_soa_composite%26soaContext=#@#PROPS.{compositeDN}#@#/#@#PROPS.{compositeInstanceID}#@#*
Also to receive better response with AIA product, please post your thread in the AIA forum.
Application Integration Architecture (AIA)
Regards,
Neeraj Sehgal

Similar Messages

HP Photosmart 6520 Server Connection Error: -1: Apps don't work and Scan to email doesn't work

My HP PhotoSmart 6520 has a persistent error to connect to the server and therefore Apps and Scan to email doesn't work.
I have manually set DNS to 8.8.8.8 / 8.8.4.4, I have installed latest driver on my Macbook pro, I have updated firmware, but still not working. Weird is also that in my ePrintCenter, the Apps I see there are not in line with thos visible on the printer.
Detail is that I have set up the printer on a Windows PC but recently changed to Mac.
Printing, scan to Computer all works fine.
Help! I have read a lot on forums but so far no solution for me!

Hi Jack6520,
Welcome to the HP Support Forums. I see that you are unable to connect to the apps and use the scan to email feature of your Photosmart 6520 printer due to a server connection error.
First off, thank you for the very detailed information, I really appreciate it.
To better assist you, would you please provide some additional information:
When you set the manual DNS servers, did you also set a manual IP address for the printer?
Have you changed routers or internet service providers recently? Have you updated the firmware on the router? If you have an ISP-provided router, do you know if they pushed out a firmware update?
Have you recently installed any new anti-virus/malware software? If so it may have blocked the ports the printer uses to communicate. I’ve included a post by VisionAiry titled “Check the Anti-Virus for Blocked Ports and Timed Scans”.
Do you have a guest network setup? Please Print a Network Configuration page. It will let you know how many networks the printer sees. A guest network will have the same name as your network with a tag about it being the guest network.
Previously did you customize the printer’s ePrint email address? I’m asking this because I might ask you to disable then enable the web services. If we have to take this step you will lose the customized ePrint email address without any ability to get it back.
What version of Mac OS X are you using? whatsmyos.com
Are there any cables other than the power cable connected to the printer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How i am suppose to receive my iCloud username if the email doesn't worked?

how i am suppose to receive my iCloud username if the email doesn't worked?
the email that they have is not the right one because my real one didn't worked so i created one and they send me all the information about how to change my email for a username in a other email who works (my real one).but now i am suppose to receive a email as they said but i don't...
how i am suppose to get the information if the email don't work?
thanks
(i french sorry for my horrible english)

See if Apple ID Support can help.
There is a contact link.
Apple ID Support

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

The bottom bar on my mail has disappeared which means I can't create, reply or forward to an email. Any ideas how to get it back? Touching the screen at the bottom doesn't work!

The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.

Close all apps in the Multitasking Drawer; Double Tap Home Button to open drawer, Swipe up on each app to close it. Repeat until all apps are closed, touch home screen.
Restart phone, hold both Home and Power/Sleep buttons down at the same time, continue to hold them down until the Apple Logo appears, Release both buttons and wait for phone to restart.
Check email app to see if bottom bar and new email icon have come back.
If not, delete the email account in settings and then add it back in again.
If mail still not working as it should, you may try doing a Reset All Settings reset in Settings => General => Reset => Reset All Settings. You won't lose any data, music, apps, videos,pictures, etc. But you will have to go back in and turn on or off any settings you changed on your phone because everything will be set back to factory defaults.

I have installed Adobe digital additions and have tried to aurthorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please

I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,

this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID.

I have installed 0S5 but restoring the backup doesn't work. the following messages appear: An error accurred while restoring this iphone (-20) because the backup was corrupt or not compatible with iphone being restored (my iphone 3GS)

I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message: because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc

Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance.

My ipod touch has an "activation required" error and the slider won`t work

I have an itouch that is only 2.5yrs old and only gets occassional use. A week ago the slider wouldn't work; power switch didn't work; I reset and then tried (unsuccessfully) to restore to factory settings through itunes but encountered an error. At that point it appeared to be restored and I had use of original feature (clock, settings, etc) but I could not connect to WiFi and when I tried to connect to itunes again it did not recognize my device and now my Windows does not recognize my device. It tried to reset again but now I get an "activation required" error and the slider won`t work again.
I have read of other with the same problem but found no solution
Any help is greatly appreciated,
Thanks

Next try thge remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Count(*) in the loop doesn't work and I really don't know why...

Hello,
I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
I get the error:
Error report:
ORA-00900: invalid SQL statement
ORA-06512: at line 26
00900. 00000 - "invalid SQL statement"
*Cause:
*Action:
I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
Oracle server has a bad day today?
The crap is 11.1.0.7 if it has anything to do with my problem.
Please help if you can.
Grzegorz
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
begin
dbms_output.put_line('Working...');
select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
for i in 1 .. v_tables.count loop
dbms_output.put_line('Number: ' || i);
v_current_table := v_tables(i);
<b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
if (v_itemno > 0) then
dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
end if;
end loop;
end;

In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
set serveroutput on
declare
     v_number number := 646989;
     v_current_table nvarchar2(50);
     v_itemno number;
     type t is table of nvarchar2(50);
     v_tables t;
     lSqlString varchar2(20000);
begin
     select table_name
       bulk collect into v_tables
       from all_tab_cols
      where column_name = 'ITEMNO'
      order by table_name;
     for i in 1 .. v_tables.count loop
          v_current_table := v_tables(i);
          lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
          dbms_output.put_line(lSqlString);
          --execute immediate lSqlString into v_itemno using v_number;
     end loop;
end;

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work.
Since installing Mountain Lion, Mail seems to be very unresponsive. I have mac mail running on an iMac (which works fine) and a 2012 MacbookPro which is the one having the issues with the Mail app. Both computers are running on Mountian Lion.
When I scroll up in Mail for instance, the frame rate drops to about 5 a second.
When I click on a message it doesn't display it in the preview pane. Which is very annoying!
But I can get around the issue by double clicking on a message and it opens up the message in a new window.
When I search for a message, nothing appears in the results. Even if Im searching for something that is defiently there, eg if I type in my name, you'd think some results would come up. But when I click on something else, the results dispaly for about half a second. Bizarre. Is anyone else having this problem?

what kind of error in browser you are seeing?
is search service application never starterd or its started but cannot crawl?
did you see the timer jobs related to search services and what's their status?
so what about the search results from site collection?
also make sure this service "SharePoint Search Host Controller Service" started on all servers in the farm.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
In the browser I receive the following error:
The search service app is running, doesn't crawl:
Yes, I can see the timer jobs related to search services, some of them are Succeded, others are Scheduled.
The service SharePoint Search Host Controller Service is started in the first server of the farm, but not in the second
one. When I try to start it, I receive the following error:
Windows could not start the Sharepoint Search Host Controller Service on Local Computer. Error 1067: The process terminated unexpectedly.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Does anyone else have two Apple IDs? I can't get rid of one of them. It's associated with my iCloud account and I can't fix it. The password doesn't work.

So, apparently I have two Apple IDs associated with my iPhone. One is an old aol address that got hacked and was shut down. Even aol doesn't recognize the email address anymore, and the password doesn't work. It's associated with my iCloud account, so now I can't access that account. My other Apple ID is with everything associated with my iPhone and everything works just fine. But now I can't get to my iCloud stuff. Has this ever happened to anyone else. The guy at the Apple store says he's never heard of it.

Does the alert refer to "Local Items?"

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

How can i make a new map on my mail? The way apple has in the manual doesn't work!

I want to make a new map for my mails, but the way tha apple gives in the manual doesn't work!

If you mean other folders then you need to create them in your email client e.g. in a browser (which you can only do in IMAP accounts, not POP account) - you can't create new folders in the Mail app itself

HT4796 link to migration assistant doesn't work. Where can I find it?

link to migration assistant doesn't work. Where can I find it?

Do you mean the link in the article to Apple Support Downloads? It works for me, now, and should take you here:
If not, try this one: http://support.apple.com/kb/DL1557
Sometimes an Apple server won't find the article you want immediately.

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

AIA error email : The composite instance link in the email doesn't work

Similar Messages

Maybe you are looking for