AIA PIP 11.1 - COM to SOM integration

We need to integrate OSM-COM & OSM-SOM using AIA PIP 11.1
So we have doenloaded:
Oracle Application Integration Architecture Pre-built Integrations 11.1 Release (part # V28086-01)
During the development therewill be no CRM in our environment.
Since there is no PIP exists only for OSM-COM & OSM-SOM, so we decided to use:
Siebel CRM Integration Pack for Oracle Order Management
However as I mentioned that we do not have CRM in our development environment
So My question is:
1> Did we choose the right PIP?
2> How to install the PIP without CRM details OR if it is possible to give some Dummy Data (which doesn't exist) for CRM during PIP install.

Similar Messages

Error in Order flow between COM to SOM

Hi,
We are facing some issues in order flow after submitting the order from CRM to OSM COM. What we observed that order gets created in COM, but not being created in SOM. In the logs, it is giving some resource xquery not found exception. We are using OSM 7.0.3 and using AIA PIP (O2A) to communicate between CRM to OSM COM/SOM.
This is the error message we are getting in the WL server log.
<ERROR> <0.0/om:on-CommunicationsSalesOrder-CommunicationsSalesOrder-state_change> <ExecuteThread: '14' for queue: 'oms.automation'> <[ order ID=338] Exception thrown while running Script resource [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/OrderStateChangeHandler.xquery]; exception location: null>
net.sf.saxon.trans.XPathException: javax.xml.transform.TransformerException: Could not determine the last modified timestamp of "osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery" because it does not exist.. File[osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery (actual location resolved to [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery]
     at oracle.communications.ordermanagement.rule.m.a(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.resolveAndtransform(Unknown Source)
     at oracle.communications.ordermanagement.extensionpoint.impl.a.runScript(OsmXQueryEngine.java:69)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:108)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:74)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.callExtension(XQueryExtensionContextImpl.java:198)
     at oracle.communications.ordermanagement.extensionpoint.XQueryExtension.invoke(XQueryExtension.java:126)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at net.sf.saxon.functions.ExtensionFunctionCall.invokeMethod(ExtensionFunctionCall.java:690)
     at net.sf.saxon.functions.ExtensionFunctionCall.call(ExtensionFunctionCall.java:343)
     at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:224)
     at net.sf.saxon.expr.Expression.process(Expression.java:468)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:688)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:686)
     at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
     at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
     at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
     at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
     at net.sf.saxon.expr.LetExpression.eval(LetExpression.java:339)
     at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:298)
     at net.sf.saxon.query.XQueryExpression.iterator(XQueryExpression.java:307)
     ... 32 more
The same scenario was working 2-3 days back, and there is no change in the deployment since then, now suddenly it is giving this error. Now today, it start giving the similar type of error in some of the customized cartridges as well (i.e. In those new created cartridges also, it is giving the issue of some .xquery file doesn't exist in the resource folder.
Could you please help me to find the cause for this issue.
Thanks,
~RS

OSM places the XQueries in the tmp folder.
We had a similar problem and it turned out that there was a script running on our machine which cleaned up the tmp folder at night. Maybe you are facing a similar issue.

Configuring JMS Bridges between COM and SOM

Hi,
We started working on OSM 7.0.2 and I have a question about the configuration of JMS Bridges between COM and SOM.
When COM and SOM Cartridges are installed in the same OSM instance on non-cluster env., it is mandatory to configure JMS Bridges between COM and SOM?
If it is case, could you please detail the procedure to follow?
In the document called "Application Integration Architecture Order-to-Activate Cartridge Guide Release 7.0.2 E18005-01" it is not obvious to understand. If you have a look in the table 2-1 page 2-15, I don't see all the mandatory field values to create a new destination bridges (for instance, what is the value of destination JNDI name?). Does anyone configure this part in the setting up OSM to the Order-to-Activate Solution?
Best regards.

The COM-SOM bridge is only required when COM and SOM are deployed on separate osm server instances and AIA Emulators are deployed (on both) for development/demo/quick testing purposes.
In QA/SIT/PRODUCTION environments, OSM should be integrated via AIA, this means that all participant applications ( CRM , OSM-COM, OMS-SOM, BRM ) should be using queue bridges (or SAF in 7.0.3)

Material for Industry Reference Model & AIA PIP

Where I can get material for the industry reference model of the business process (Order to Cash/Oppertunity to Quote etc )?
Is there any link where I can more macro level details of the AIA PIP released so far?
Thanks
priyadarshi.

Please refer to this [metalink page|https://metalink2.oracle.com/metalink/plsql/f?p=130:7:1127531213955866075:::::] and select "Application Integration Architecture" as Product Category from left pane.
Regards
Rohit
Edited by: Rohit Agarwal on Mar 25, 2009 11:19 AM

Custom Build AIA PIP between Siebel and eBS

Hi,
I have a project where in I am integrating Siebel and eBS systems.There are different process flow integrations that I need to integrate between these 2 systems.I know there is O2C PIP for integrating between these systems.But due to some reasons my company doesnt want to pursue using O2C PIP for integrations.So I would like to know
-> if there is any other PIP for this purpose OR
->If we can build a custom AIA PIP for this and what are the pros and cons of it and tasks we would need to do for successful integrations of different process flows? OR
->if there is any way in SOA suite that we can use to integrate between these systems for different process flows?I wanted to know how OracleASadapters (packaged based adapters) for Siebel can work in this case and pros and cons for using this adapters?
->if there is any other way,please let me know!
Thanks,
S

Hi,
I don't think we have any PIP other than O2C to integrate Siebel with Ebiz.
It is the matter of evaluating to what extent the out of the box PIP answers the integration requirement. As per my understanding no PIP suits 100% for any given business integration, it has to be tweaked for sure. It should be the architect decision comparing the effort of scratch development vs using PIP.
One has to understand the best practices for building AIA integration otherwise we end up making tightly coupled integration which make no sense of using AIA foundation pack. Read best practices of AIA development.
The core advantage of using AIA foundation pack is that enables the central hub of integration between any systems leaving a room for integration of other business applications. You can also build simple composites to integrate without following AIA principles but it is as simple as making P2P integration.
Thanks
Saikrishna Panuganti

Nd help configuring JMS Bridges between COM and SOM

We skip the JMS Bridge between SOM and COM because we deploy the O2A cartridge using the:
- When Central Order Management and Service Order Management Exist in the Same
OSM Instance in a Non-Cluster Environment.
- Customer and Service Order Management in the Same OSM Instance
"Deploy the following cartridges through Design Studio for the simple fulfillment
topology"
Now what happening is: the flow of the order taking time before it was completed or need manually submit the task using oms-automation user.
But even with the above work around we cannot see the billing data in BRM.
UpdateSalesOrderSiebelCommsProvABCSImpl (v. 1.0) this is the last BPEL process we see in BPEL.
FulfillBillingFunction.BRM-ALL.BundleGranularity.FulfillBillingSignificantUpdates is the last Activity we can see in osmwebui if not manually update the task.
Then ProvisionOrderSIResponseTask is the current task in osm task web client where order state is In-Progress.
With that it seems the SOM is not processing.
Do you have any idea why we can't complete the order and see the billing data in BRM?
Is'it the COM and SOM not properly configured, or have some issue with other application(RODOD)?
Thanks,
Ace

Hi All,
This issue already resolve by configuring the routing in AIA.

AIA PIP 11.5 O2C installation

Hi All,
I installed AIA PIP 11.5, i am facing issues when i am deploying O2C, i am running the command nohup ./deployO2C.sh &. I am getting below error, please can any one help me.
Thanks,
Deploy:
     [echo] -----------------------------------------------------------------------------------
     [echo] ------------- Deploying Comms Order to Cash: SBL CRM, OSM, and BRM PIP ------------
     [echo] -----------------------------------------------------------------------------------
[taskdef] Could not load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found.
BUILD FAILED
/home/aia/Oracle/Middleware/AIA_Home/pips/Communications/O2C/DeploymentPlans/O2CDeploy.xml:29: The following error occurred while executing this line:
/home/aia/Oracle/Middleware/AIA_Home/Infrastructure/Install/AID/AIAInstallDriver.xml:35: weblogic.security.internal.encryption.EncryptionServiceException: weblogic.security.internal.encryption.EncryptionServiceException: weblogic.security.internal.encryption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key java.lang.SecurityException: The provider self-integrity check failed.

This is not at a Installation issue.
All your PIP service artifacts will refer to "Oramds:/apps/........" path.
Ensure that you have this folder structure available in your local machine and create a JDeveloper SOA-MDS File Based Connection.
Thanks,
Chandra_

Does Oracle AIA PIP provides extension points 4 ABC, EBF & EBS?

I wanted to know if all Oracle AIA PIP provided the standard extension points for all the AIA components like ABC, EBF & EBS services?
I am neither finding the extension points in any PIP code for ABC/EBF nor in AIAConfigurationProperties.xml?
Therefore how do I know the PIP code provides standard extension points for all the AIA components like ABC, EBF & EBS services?
Is there any UI or configuration file which mentions about all extension points?
Does, by default the AIAConfigurationProperties.xml files have the setting for all extension for ABC & EBF?
Thanks In Advance!
priyadarshi

Hi,
All the extension points for ABCS and EBF are configured in AIAConfigurationProperties.xml file and Iam not sure about EBS.
From the AIA Foundation pack you will not able to see any extension point in the above said file.
If you have a PIP installed, then the entry will be seen in the AIAConfigurationProperties.xml as below,
<Property name="ABCSExtension.PrexformMQABM_To_ProcessItemEBM">false</Property>
<Property name="ABCSExtension.PostxformMQABM_To_ProcessItemEBM">false</Property>
<Property name="ABCSExtension.PreInvokeProcessItemEBFV1">false</Property>
<Property name="ABCSExtension.PostInvokeProcessItemEBFV1">false</Property>
Based on the extension used, the value will be true or false for the specific AIA Process.
Thanks,
Ashok.

AIA PIP for CRM On-demans for R12

Folks,
One of our client is looking for AIA PIP for CRM On demand interface along with R12.
We have never done this before, however, our understanding at the high-level is that it would require R12, FP, SOA Suite, Oracle Service Bus. Can someone point us right direction on this?
1)What are the required components for this installs?
2)Any documentations or links would be good
Cheers,
Thiru

Can someone from this forum help us?
Thiru

How come only some of my iPhone music shows up on my Mac?

How come only some of my iPhone music shows up on my Mac?

Do you have more then one Apple ID? Have you tried signing out and back into the account?

Does anybody have the O2 Arena Wallpaper that comes with some O2 phones?

Does anybody have the O2 arena wallpaper lit up at night. It usually comes with some O2 phones such as the galaxy S4.

MarinaP wrote:
jonsie wrote:
I use the tower bridge wallpaper now for a little reminder of home....got sick of looking at Mauys face Already tired? You're gonna have to see that face for a while!
I do have a month or so break so no doubt I'll miss her....a little

HT1349 how do i print the bonus booklets that come with some albums i have purchased

how do i print the bonus books that come with some albums i purchased?

I have a Mac so I tried this. I opened the booklet outside of iTunes and the app that opened it, has a print option.
These digital booklets are simply PDF files and Adobe makes an app that can open them and print them and it is free to use.

Okay so my new ipad air has come with some free apps such as iBook, find my friends, iMovie ect... And my iMovie isn't in my app list so I tried goin to App Store n reopening but it comes up with you have purchased so no additional charges n doesnt dwnlod

Okay so my new ipad air has come with some free apps such as iBook, find my friends, iMovie ect... And my iMovie isn't in my app list so I tried goin to App Store n reopening but it comes up with you have purchased so no additional charges n doesn't download at all!

How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

BRM MultiSchema supported in AIA pip 11.2

Anybody know if the BRM MultiSchema is supported in AIA Pip 11.2 o2c and aabc?

HI,
I check the link shared by user10634005 but I think that only the search supports the multischema. Can you explain me where is the dynamic code to create a customer in one specific schema?
For example the SyncCustomerPartyListEBM_to_PCM_OP_CUST_COMMIT_CUSTOMER.xsl and SyncCustomerPartyListEBM_To_PCM_OP_CUST_UPDATE_CUSTOMER_inputFlist.xsl have hardcode the value 0.0.0.1 it means that the customer will be always created in the same schema?

Unable to execute startscen.sh for AIA PIP Agent-Assisted Billing Care 2.4

Hi all.
I am executing the 'Sync Collections Actions Integration Flow' of 'Agent-Assisted Billing Care' PIP to transfer collections data.
I just install AIA 2.4 with ODI 10.1.3.5, BRM 7.4 and Siebel 8.1.1.
After executing the following command for the first time :
./startscen.sh SYNCCOLLECTIONACTION 001 GLOBAL -v=5
I obtain the following error :
java.lang.Exception: Error: No value to affect to this variable for DefDate:2009-06-12 16:09:30.0
DefN:null
DefV:null
IndStore:L
ITxtDefT:null
ITxtVar:null
SessNo:23200
VarDatatype:A
VarName:AIA_COLLECTIONS_PROJECT.AIA_HOME
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.execStdOrders(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTaskTrt(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.e.y(e.java)
at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
at oracle.odi.Agent.main(Agent.java)
I read the procedure from "Siebel CRM Integration Pack for Oracle Communications BRM: Agent-Assisted Billing Care 2.4 - Implementation Guide (E14801-01)".
Thanks,
Patricia.

Could you open the package which is above the scenario SYNCCOLLECTIONACTION.
If you open this package, it should contain a variable step (maybe several) which is named like your variable.
If you click on this step you should see in the General Tab a field Linked Object which can't be empty. Could you confirm it ?
At Right of this field you should see a Type ListBox. Try to find the variable step which contains as Type *"Refresh Variable"*, and then right click on this step and Execute this Step, it should execute a refresh on this variable.
After that try again to execute your scenario.

AIA PIP 11.1 - COM to SOM integration

Similar Messages

Maybe you are looking for