AIAAsyncErrorHandlingBPELProcess [1.0]-- Status Pending
Hello Experts,
Env:
Sun Solaris 10
SOA 11.1.1.6.0 -- 2 Node cluster
Web Logic 10.3.6
OSB
BAM
AIA
Unable to use AIA, because of the error in AIASync apps... Tried to shudown and restart WLS, SOS etc.. no help
When I click the service, got the below error..
========
The composite AIAAsyncErrorHandlingBPELProcess (1.0) is not available. This could happen because either the composite has been undeployed or soa-infra has not yet loaded this composite.
Error occurred during deployment of component: AIAAsyncErrorHandlingBPELProcess to service engine: implementation.bpel, for composite: AIAAsyncErrorHandlingBPELProcess: ORABPEL-09705
Could not initialize variable.
An error occurs while initializing BPEL variable inputVariable; the schema processor cannot find the element {http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2}Fault in the following schemas: oracle.fabric.common.wsdl.SchemaManager@47705e48.
The XSD element on which the variable was based was not properly defined in XSD or the WSDL.
Ensure that the element named in the error message is valid in the XSD or the WSDL.
Expand Show Additional Trace Information Show Additional Trace Information
============
Show additional trace, has the below
oracle.sysman.emSDK.app.exception.EMSystemException at oracle.sysman.emai.model.sca.composite.core.impl.EMCompositeModel.handleErrorDetails(EMCompositeModel.java:83) at oracle.sysman.emai.model.sca.share.composite.CompositeCoreModel.initialize(CompositeCoreModel.java:123) at oracle.sysman.emai.model.sca.composite.core.impl.CompositeModel.initialize(CompositeModel.java:46) at oracle.sysman.emai.model.sca.EMEntityModel._initializeEntityData(EMEntityModel.java:28) at oracle.sysman.emai.model.sca.common.SCAEntityObject.initializeSCAData(SCAEntityObject.java:124) at oracle.sysman.emai.model.sca.composite.core.impl.EMCompositeModel.initializeSCAData(EMCompositeModel.java:31) at oracle.sysman.emai.model.sca.SCAObject.initializeData(SCAObject.java:66) at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.initOrResetEMObject(ModelUtil.java:319) at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.access$000(ModelUtil.java:280) at oracle.sysman.core.model.util.ModelUtil.initializeMBEMObjects(ModelUtil.java:231) at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:128) at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:101) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPrePrepareModel(EMPagePhaseListener.java:867) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.beforePhase(EMPagePhaseListener.java:795) at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:191) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:358) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
How can I fix this?? Any help is appreciated..
Thanks
Rgds
Natrajan
Hi Michael,
i don't have workflow-task.
I have a problem about create user with assign manager privileges. I have a following error abou create user with manager privileges :
Error:
Method: Create user
Source: OraOLEDB
Error: 80040E2Fh (-2147217873)
Description: ORA-00001: unique constraint (MXMC_OPER.PK_MXI_VALUES) violated
ORA-06521: at "MXMC_OPER.MX_UTILSETATTRIBUTE", line 1447
ORA-06521: at "MXMC_OPER.MX_UTILSETATTRIBUTE", line 1791
ORA-06521: at line 1
so i can add user Administrator without manager privileges.
How can I assign the user Administrator with manager privileges ?
OS : HP UX 11.23 - Netweaver 7 /SP20 Java Stack - IDM 7 SP3 - Oracle Server 10.2.04
Windows XP - MMC - Oracle Client 10.2.0.1
About the oracle-error: Do i need to install Oracle Client 10.2.04 ?
Similar Messages
-
Hi,
I wanted to order Skype number from Sydney-Australia (Number: 0050060) so I selected a number & 3 months payment option (without entering credit card details) and then I came to know that if we get subsciption first then there is some discount on skype number.
So I first ordered subscription by entering creditcard details, Subscription order was delivered successfully. Then I returned to order skype number...but now its showing order status as pending. I tried again but this time radio button is on 1 month payment option and 3 months option is desabled. I ddin't proceed ahead. But now in my purchase histroy its showing another order with one month paymrnt option and its status as created.
No amount has got deducted from my skype credit or bank credit card and I have not received the number yet (order 1 with 3 months payment option: status: pending & order 2 with 1 month payment option status: created & at number its showing as reserved for 19 days).
Tried to contact customer support but unable to reach and send the details about problem. Continue support request button on skype website is disabled.
I want to get the number with discount for 3 months, so how can I make payment for it and get the number at the earliest? Experts Please help. Thanks.
Regards,
saurabhraste83Hi, saurabhraste83, and welcome to the Community,
These are the types of issues which can be resolved only by Skype Customer Service. Please try using another web browser different from the one you tried to contact Customer Service with on your first attempts; many times, this simple suggestion works!
Kind regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
Import Items Request remain in Status Pending Normal For a Long Period
Hi,
Import Items Concurrent Requests Remain in Status Pending Normal For a Long Period(30 minutes) Before Running.
It is actually completing within 10 minutes after pending normal for 30 minutes.
This problem is happening only with Import Items concurrent request, Other request are running as soon as they started.
My Application version: 12.1.3
Database Version:11.1.0.7
My Standard Manager details Processes=16 Sleep Time=10 Cache=40
Please correct, If there is need to change Standard Manager configuration...
Plz reply soon.
Regards,
AligAlig,
Standard Manager is running this request, Import Item program request after the completion, creating Item categories for this it is taking time, that is the reason another import items request is waiting for the Item categories program to be completed.You need to find out why the "Item Categories" takes that long to complete.
Do you have the statistics up to date?
Enable trace as per these docs to find out why the request takes that long.
How to Set a Trace with Bind and Waits from the Concurrent Request Form [ID 601647.1]
How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
Thanks,
Hussein -
hi,
i oem grid control i cant access one of the database.in the availability section it shows status pending.what is this error.your kind help is always appreciated.
thankx in advance....Check for the database,listener, agent are up on that server.
try
emctl upload
command upload the data to the server. then check
emctl status agent
C:\Documents and Settings\Administrator.EXRAQUES>emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.2.0
OMS Version : 10.1.0.2.0
Protocol Version : 10.1.0.2.0
Agent Home : E:\oracle\product\10.1.0\db_1\Saravanan_orcl
Agent binaries : E:\oracle\product\10.1.0\db_1
Agent Process ID : 640
Agent Process ID : 640
Agent URL : http://Saravanan:1830/emd/main
Started at : 2006-12-16 15:59:46
Started by user : SYSTEM
Last Reload : 2006-12-16 15:59:46
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 1664 must be near to 0
Size of XML files pending upload(MB) : 28.42
Available disk space on upload filesystem : 2.80%
Agent is Running and Ready
it must be successfull. -
How to show catalog items with Approval Status:Pending in a Content Search Webpart
How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.
I don't think you're going to be able to. Usually Approval Status is used in conjunction with Major/Minor versioning and while Approval Status is pending the item is usually a draft.
As a result the search crawler should not be able to see the draft items as it would not have the necessary rights to do so. (Good practice ensures that the Search Crawler has only read access and is not an elevated account for this reason)
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times. -
Scheduled reports (DeskI) remain in status "Pending" in SP4(FP 4.3)
Hi,
I am facing a weird problem with a BO XI R2 cluster installation (2 Windows Servers, one CMS, 2 DeskI Job servers on one node) after installing SP4 + FP 4.3. The users are allowed to schedule DeskI reports they created themselves. The scheduling works out fine at the beginning but at some point overnight the DeskI servers (although empty) completely ignore the fact that there are available jobs for scheduling. This means that the DeskI reports remain in status "Pending". Changing the "maximum number of jobs" setting at the CMC in the DeskI job servers properties tab seems to work like a wake-up call and the scheduling starts again. After a while though (can take up to a day to get there) the job servers start again to ignore the pending jobs.
Is this a known issue in SP 4? Anyone had similar experiences two?
Any help/ideas & hints will be highly appreciated.
Cheers
StratosHi Will,
Quote: "In any case, in normal circumstances, you should not having pending jobs if your number of running numbers is below your max number of jobs setting". Exactly this is what we are expecting but the job server seems to sleep not caring about the actual number of pending jobs und wakes up only if we use a high setting (40) for the maximum number of jobs.
Have found some references about similar problems for both the Web Intelligence and the Crystal Report Job Servers but not a real solution so far. It may be a problem with the CMS but I am not really sure. Restarting the CMS does not help neither.
Cheers
Stratos -
Hello,
I am newly configuring and testing Posturing/Client Provissioning on ISE. I configured Client_Provissioning Policy without any Posture_Policy just to test it works or not.
My Wireless client can authenticate and get and install NAC_Agent successfully, but after that no network access is given to the client pc.
on the ISE Authentication Reports it shows ( Posture Status Pending )
and on the Wireless client everytime when i open browser i get this message " Cisco Agent was detected and is running. If you are still unable to access the network please contact you administrator"
I dont know what is the issue, plz helpHi Ravi,
I have not yet configured any Posture policies. i have configured only client-provissioning policy, i want to first test client-provissioning works properly before applying any Posture-Policy.
So My wireless clients are correctly redirected and recieve NAC Agent, but afterthat it seems that the NAC_Agent does not do anything and does not send any report back to ise for further processings.
on the ise Authentication Report i can see, the client is stuck in UKNOWN-STATUS , and shows Posture_Status Pending...
it does not go to Uncompliant or Compliant Status.
I dont know what can be the issue? neither ISE shows me the error , nor the WLC. -
Hi all,
when I go to GRID, it showed that the status of the DB is "status Pending". but when I go to server and check that DB, the database is running.
1. Why it showed status pending?
2. how to fix it?
thanks,Try the following:
1. Stop the agent
<AGENT_HOME>/bin/emctl stop agent
2. Clean start the agent:
2a Delete current upload and state files
rm -r <AGENT_HOME>/sysman/emd/state/*
rm -r <AGENT_HOME>/sysman/emd/collection/*
rm -r <AGENT_HOME>/sysman/emd/upload/*
rm <AGENT_HOME>/sysman/emd/lastupld.xml
rm <AGENT_HOME>/sysman/emd/agntstmp.txt
rm <AGENT_HOME>/sysman/emd/blackouts.xml
rm <AGENT_HOME>/sysman/emd/protocol.ini
2b Start the agent
<AGENT_HOME>/bin/emctl start agent
2c Issue an agent clearstate from the agent home
<AGENT_HOME>/bin/emctl clearstate agent
3. Resecure the agent (if the agent was secured in the first place).
<AGENT_HOME>/bin/emctl secure agent <registration password>
4. Force an upload to the OMS
<AGENT_HOME>/bin/emctl upload
5. Wait 2 minutes. -
Status Pending on Grid Control
Hi,
On the Grid Control -> All Targets Type=Cluster
I have the "Status Pending" on my target Cluster.
All the nodes are up as also as all the agents, instances, etc...except the cluster that appears to be "Status Pending".
I tried to restart all the agents and refreshing the configuration, but the "status pending" remains.
Anyone has any idea?
Thanks.
Best regards,
José CarlosGrid Control server can connect to target database 1521(listener port)?
Grid Control server -> target database:1521
Grid Control server -> target database:agent port (3872)
target database -> Grid Control server: 4889 ; (upload agent file)
http://download.oracle.com/docs/html/B12013_03/firewalls.htm
Please check your connect
After that clear state
1. Stop the agent on the target node
emctl stop agent
2. Delete any pending upload files from the agent home
cd $AGENT_HOME/<hostname>/sysman/emd/
rm -r state/*
rm -r collection/*
rm -r md/upload/*
rm lastupld.xml
rm agntstmp.txt
rm blackouts.xml
3. Issue an agent clearstate
emctl clearstate agent
4 Start the agent
emctl start agent
5. Force an upload to the OMS
emctl upload agent
Good Luck -
Status: Pending on Texts Sent
I have sent a text message and on the message report is says "Status: Pending" Anyone know what this means? Did my message go through? The message was sent a few weeks ago and it still says the same thing. Thoughts? I do not want to send anymore message to this number if they are not going through. Thanks in advance for your help.
"Pending" implies it has not been sent, but I didn't think they hung around for weeks - I thought it would try for a few days and then mark it as undeliverable....
Does the number have a block on text messages? Is the phone out of service? Try sending one more...may be they will both go through? -
Hi experts,
I'm having a oracle 10g which runs in Linux 64 bit.
When I log in to the EM console everytime it displays the following msg.
Status Status Pending
also it gievs the Last Known State link. when I go in to that the General information displays as Status Status Pending
Please give me a solution for this.
Thanks ,
Prasad.Hi,
What is your oracle Release if 10gr2 or 10.1.0.3 or later
then you can fellow DBMSdirect suggestion but if 10.1.0.2 then you have to manually drop repositary and create.
SQL> DECLARE
2 CURSOR c1 IS
3 SELECT owner, synonym_name name
4 FROM dba_synonyms
5 WHERE table_owner = 'SYSMAN';
6
7 BEGIN
8 FOR r1 IN c1
9 LOOP
10 IF r1.owner = 'PUBLIC' THEN
11 EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
12 ELSE
13 EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
14 END IF;
15 END LOOP;
16 END;
17 /
PL/SQL procedure successfully completed.
SQL> DROP ROLE mgmt_user;
Role dropped.
SQL> drop user mgmt_view cascade;
User dropped.
SQL> drop user sysman cascade;
User dropped.
After drop complete repository you can create new repository through EMCA.
E:\>emcahttp://dbataj.blogspot.com/2007/01/oc4j-configuration-issue.html
regards
Taj -
Deployed a custom built Plug-In..
It seems to be collecting the data correctly and displays the data, but its showing "Status Pending" in OEM.
Any reason when is this message displayed..and how to troubleshoot...
Thank youIf its the database thats pending I would suspect the configuration for the database.
Go into the agent screen, targets, then configure that database monitoring. I think you can do this too from the links on the bottom of the database home page (where it shows status pending) under Monitoring Configuration.
Of course dont forget to check the various logs on $AGENT_HOME/emd/logs -
EM : Status Pending Since 10.04.2005 0:00:00
Hi,
Why after configuring EM for one database with EMCA and connecting by sys as sysdba I see on first page:
Status Pending Since 10.04.2005 0:00:00
instead of
Status
Up Since
Time Zone
Availability (%)
Instance Name
Version
Oracle Home
Listener
Host
?If you are feeling brave, and you are sure that all else is working - including attempting to remove the db target from grid control and re-create it... I have been successful at bashing into the grid control repository, updating a few values, and getting Grid control to see the DB as "UP".
If the status shows pending, but the performance and admin tabs do not require a password and show current information, try the following:
Log into the grid control repository as sysman.
Figure out what the target_GUID value is in the table mgmt_targets
Change the availability status to "1" in the following 3 tables for the appropriate target_guid - it is likely a status 2 (unknown) or 6(blackout) now:
mgmt_availability
mgmt_availability_match
mgmt_current_availability
Hope that helps! -
MTA Message Tracking - status PENDING
Hi All
Any idea why MTA Message Tracking will say Status PENDING for all messages, but when you look from the client, it says Delivered/Opened etc.?
This is happening on all messages to all post offices etc.
Thanks
Emilyemilym,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Hi,
I can't figure out how to get grid control to show me the proper status of my listener. It can connect to it, stop/start it, but it always shows me "status pending".
Why's that? And how to I get it "right"?
Any help/pointers would be appreciated.
Thanks,
David SchraderStatus Pending often means oem cant talk to your server.
Double check dns abilities for your db server to see oem web server and visa versa.
Maybe you are looking for
-
I'm new to this so please forgive me if I'm not using the correct terms. My ITunes version is 11.1.3.8. For years I had an IPod Classic and it worked perfectly with all my music where I wanted it. Unfortunately, it was recently stolen. I bought a
-
Possible to adjust color/ contrast in this way?
The more I use Photoshop, the more often I come up with an image where everything is right, but something on one layer has two very similar colors, which are a little too close in either contrast or hue. But for me, using 'selective color' or 'bright
-
Forms configuration file in Unix
Hi We're using Forms 9i. Is there any configuration file in Unix in wich I can set Forms to read .pll files instead of .plx? TIA, Marcos
-
New security required for managing rejections in UAR?
I have been told by someone at SAP about several new authobjs required for SP06 UAR "reject" features. Objects include: ManageRejectionsGenerateAction ViewManageRejectionReasons ManageRejectionsCancelGenerationAction ViewRejectUsers
-
I have been trying to implement the Multiple Non-Destructive Filters Mode sample at http://labs.adobe.com/technologies/spry/samples/data_region/MultipleFiltersModeSample.html but just cannot get it to work, although the data shows and is sort of sort