AIAB Issue - Can't see my spending

Hello SAP Gurus,
we can capitalize assets fine when it runs through the u201Cnormalu201D accounts payable cycle.  Where we have the problem is when we have to do a manual journal entry to book the spending.  It seems like SAP doesnu2019t recognize these manual entries.
Is there any t-code to record this spending?
Thanks

Hi,
May you can provide step-by-step instructions what you would like to do exactly with these journal entries? You say "It seems like SAP doesnu2019t recognize these manual entries.": please enter transaction and parameters like transaction type etc that you use to make such a posting.
It is not entirely clear what you are trying to do and which transaction you are currently trying to use for such a posting.
Regards,
Brigitte

Similar Messages

  • Shared Service Issue - Can't see Projects!

    Hi All,
    i've an issue on a Hyperion 9.3.3. environment distributed on 3 server.
    This architecture was installed since 2009 and it was fine until three days ago.
    The first symptom was an error in the essbase.log: Essbase wasn't able to find Admin user in shared services.
    After a reboot in shared services, we can't see any projects (we have Analytics Server, Interactive Reporting, Planning, Business Rules).
    We tried to recover LDAP data but it didn't make any changes.
    The system is working fine, but now we can't provision any new user or modify the existing ones.
    All suggestions are welcome!

    did you change any SSL-certificate recently?
    did you start HSS before the other applications?
    can HSS server:port be reached from all the servers where the other applications are running?
    Did you try to open HSS in a different browser -(version). (little change its a client problem but you can always check it).
    Did you change the adminuser password?
    more?
    Detlev

  • Xserve/Windows Network Issue - can't see computers

    seriously, everything was fine until xmas eve. Now I can't see the computers on the network on a mac or a pc.
    Now, when I go to Start/My Network places on a pc the share points do not show up.
    Also when I go View Workgroup Computers - it returns an error. In the error it mentions permissions. I've propogated permission, restarted SMB services and restarted twice.
    OSX 10.5.1, Xserve, standalone server, SMB services are running, one username and password for everyone with r/w permission, even guests access is turned on, ...
    AT&T Netopia dsl modem (bridged mode), Linksys wireless router with ip's assigned to all computers, to a switch that routes to users and two more switches.
    note - I can see a few macs on Mac OSX Tiger and Leopard but nothing on the pc's. I can, however, see a unix sever that's on the network by typing
    ServerName in an explore address bar. And at one time I could type in
    Xserve on both macs and pc's but no longer.
    Thanks,
    ctrent

    I'm not sure I get what your setup looks like but:
    "Linksys wireless router with ip's assigned to all computers"
    Does this mean this is your Internet router and it's setup for serving IP's through DHCP to LAN clients? I would use the Xserve for DHCP also serving the (search) domain name and LDAP server name and search base.
    And why is server still at 10.5.1?
    You need a newer version, at least 10.5.3.
    The Windows/SMB service should have the domain/workgroup name entered in CAPITALS.
    Windows clients will have problem seeing the Netbios workgroup/domain if the Windows firewall is one/not letting SMB traffic through.
    All Windows clients should be setup using the same netbios Workgroup/Domain name or bound to a SMB domain (OD Master and PDC configuration reuqired in the server).

  • Netflix issue, can't see all shows

    Hi guys, I've got netflix linked up to my ATV3 and noticed I can't see some shows.
    An example is South Park, I can only see season 11-15 on ATV3 whereas on my computer I can scroll from season 1-15 (there's no 1-10 on ATV3).
    I've noticed I'm missing a few other shows too.
    Is there anyway of fixing this? Or have any of you guys had this problem?
    Thanks

    Anyone at all?

  • CENTRO ISSUE - Can't See Images Online Or Sent Pictures

    I am new to the Palm message boards, so I apologize in advance if I've missed the answer to this issue somewhere.  BUT my Centro suddenly stopped allowing me to view images online.  This includes PictureMail (I have Sprint).  In order to view received pictures I must save them to my device.  Another friend of mine says to be having the same issue with her Treo and hasn't really put much effort into figuring out how to resolve it.  Any thoughts?
    Post relates to: Centro (Sprint)

    Viewing online means using Blazer to me...
    There is a simple setting that will disable viewing pictures - it's called "Fast Mode".
    Tap the Lightning bolt at the top of Blazer and see if it's set to that mode.  Change it back to "Normal Mode" to view all the content on web pages.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Weird issue (can't see all video after importing to FCP)

    Dear board members!
    I have a number of files, which were digitized with FCP. Due to a high number of timecode breaks, they were digitized with "abort ETT/PTV on dropped frames" and "abort capture on dropped frames" checked off. Also "on timecode break" was set to "warn after capture".
    Now the issue. If I open these files in finder (with QT player), I can see all of digitized video (i.e. 36 minutes) for each of these files. In FCP (even if I import them once again to a new project) I can see only a portion of these files (first few minutes), i.e. it doesn't show me anything after the first time-code break.
    Any suggestions?
    Thanks,
    Tim

    If you don't want to deal with recapturing them (the best way to deal with the breaks at capture might be to enable "create new on TC breaks" - "warn after" will create the situation you have now)
    anyway, you can probably save reference or self-contained movies from QT player that FCP will be able to import.
    Hope this helps -
    Max Average

  • VPT (Voice Provisioning tool 1.0.2) issue- Can't see device

    Hi,
    Just wondering if anyone has seen this issue with VPT 1.0(2). When the customer tries to add a new phone via Voice Provisioning Tool he can't select a device type as there isn't anything in the drop down section. I have attached screen snapshot. It iss talking to CCM 4.1(3)SR5d.
    I have seen the bug CSCsb40475 but the IIS restart didn't help. Any help would be appreciated.
    Cheers
    Ati

    VPT 1.0(2) does not support the CCM 4.1(3) version 2. Please remove the CCM 4.1(3) version 2 plug-in via the procedure described here:
    http://www.cisco.com/en/US/docs/voice_ip_comm/vpt/1xrelnotes/mig/vptrnote.html
    Make sure you are following the install procedure here when installing Unity 4.1(1) plug-in:
    http://www.cisco.com/en/US/docs/voice_ip_comm/vpt/1xrelnotes/mig/vptrnote.html

  • The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

  • Office 2010 Outlook Desktop/Office 365 Issues-Cannot connect to the desktop in Outlook, Can't see more than 6 old messages in Office 365

    Hello,
    I'm hoping someone can help me out. I'm having an issue all of a sudden with connecting staff members to Outlook 2010 desktop version. Our super kept having issues, so we disconnected her from the desktop, and tried to reconnect her. I wish I wouldn't have
    done that, now I can't get connected back up. We thought we would login to the web version so that she could check her e-mails, which is fine. She can get new e-mails just fine, but she can only see 6 old emails, and she has 100's of old e-mails. Someone please
    help, I'm about ready to pull my hair out!!! Very frustrating. :)
    Thank you in advance,
    Ang

    Hi Ang
    So this is an Office 365 (Exchange-based) email account? Do you mean you've deleted the specific account from Outlook client and tried to re-add it again?
    "now I can't get connected back up" - At which step will it fail? Any error messages when things go wrong? Please first check the account settings that you've entered, and make sure they are correct.
    "She can get new e-mails just fine, but she can only see 6 old emails, and she has 100's of old e-mails."
    - With web mail portal, you are connected to your mail server directly. If you are referring to the web-based mail portal here, then these old mail messages probably have been deleted from the server.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

    Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

    There is another setting for "Start Conversation from", that needs to be set to phone number.

  • Issues after the last update Lumia 920, can't see ...

    Hi.
    I have this issue after the update.  I do not know what's wrong but I can not see my recent calls. Neither can see my sms is sent or the ones I have taken back.
    I have tried to call one of my friends. I can hear them but they can not hear me. I have also checked with my operator and they do not have the disruption will harm the network.
    So what's really wrong? This happened after the last update I did. Living in Sweden, Gävle uses Tele2 comviq simcard.

    When did you update? Have you tried simply rebooting your phone by pressing and holding both Vol down + power buttons for around 10 seconds until the phone vibrates? If that doesn't work, you could try resetting your phone but make sure you backup your data beforehand. 

  • I can't see a message from my union because of problems with changed adress for pop-upwindows and some other issue

    Hi,
    I'm from Sweden and I'm having problems with a website my union has. I have been able to see messages from them before but they've changed their adress and on the site they tell people they have to put the new adress on the approved list for pop-up windows. I have done so but it's still not working. Maybe I've done it wrong, I don't know but it's annoying as hell that I can't see the messages they send.
    I really need help with this.
    Best regards,
    Lena

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • HT1595 i can't see my apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
    From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system.

  • My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as how to resolve this issue

    I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as to how to resolve this issue

    I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
    You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
    http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
    I Googled "workaround for FaceTime in UAE" to find this.

Maybe you are looking for

  • PL/SQL if statement inside tabledata in another table

    if following possible???: htp.tableData( htf.tableOpen || htf.tablerowOpen || htf.tableData() || htf.tablerowClose || --here i want a if statement; --is this possible abd how? --if 1 = 1 then htf.tablerowOpen || htf.tableData() || htf.tablerowClose |

  • How to Synchronization Outlook with third party system?

    Our Customer has a website which has a table by name task. This task table on the website is populated by admin of the website. Each task is assigned to sales person. The Customer wants the website task to be synchronized with outlook task for each s

  • Print calculation for program - PLEASE HELP

    I have a program that is supposed to take an input from a user for a list size and the program should calculate the number of comparisons required to sort the list. i.e. If the user entered 100 the program should output it takes 4950 comparisons to s

  • Function module for wage type permissibility

    There are is a function module for get the wage type permissibility in the module of HR? Kind Regards

  • Why do I have question marks in the finder window header?

    Ever since I upgraded my MacBook Pro to Lion I've noticed a large question mark in the finder window header. There is a smaller one beneath it, and they're both located just to the left of the search window.