Aid installation of virtual 6,1 PC or virtual PC 7,0 in PowerBook G4

Hello.
I have mac PowerBookG4. Gustaria to know to me like I can know
that processor I also have intalado.Y gustaria to know how to me to
mount a virtual maquina that it programs needs.
Xp wanted puts Windows pro sp2 or Windows 2003 server enterprese
Since I can do it.....
My cnfiguracion is by the been able thing to see:
Name of the equipment: PowerBook G4 15"Model of computer: PowerBook5,8
Type of CPU: PowerPC G4 (1.5) Units of CPU: 1 Speed of the CPU: 1,67GHz
Cache of level 2 (by CPU): 512 KB Memory: 1,5 GB Speed of the bus: 167
MHz Version of the BOOT ROM: 4.9.5f3
ST9808211A:
Capacity: 74,53 GB
Model: ST9808211A
Overhaul: 3,07
Extraíble support: No
Name BSD: disk0
Protocol: IT TIES
Number of the unit: 0
Type of connector: Internal
Drivers de Mac OS 9: Yes
State S.M.A.R.T.:Verified
Gustaria to know to me that version of virtual PC is recommendable.
Greetings Pedro Colás.

Hola.
Entonces que maquina virtual aconsejas.
Que aconsejas Microsoft Virtual Pc o el Passarells.
Saludos pedro colas.
Hello.
Then that maquina virtual you advise. That you advise to
Virtual Microsoft PC or the Passarells.
Saludos pedro colas

Similar Messages

Error (23317) The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks. Recommended Action The operation Change properties of virtual machine is not permitted on a virtual machine that h

Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Hello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties.

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Installation fails with "Cannot launch the Java Virtual Machine"

I'm trying to install OAS 10.1.3.1. on Windows XPbut after copying all the files the installer starts complaining that it cannot lauch the Java Virtual Machine. Eventually, the process gets to the configuration step where it succeeds with one configuration, then fails with the next, and then finally goes into an eternal loop.
When launching the installer it claims that my environment successfully passes all test for memory size, etc.
Is this a known problem? Is there any way I can get more info about the reason why the JVM could not get lauched? I searched for information in the logs without success. I also tried to play around with the PATH environment variable since I saw some installation note saying that includingthe jre/bin path here could help, but it did not help.
Could anyone, please, give me a hint of how to complete the installation successfully?

Thanks for the hint.
I had a look in the INI-file of my BPEL installation and this is what it said about memory:
JRE_MEMORY_OPTIONS=" -mx256m"
Still, if I start the BPEL server it finally comes up after issuing a lot of complaints but as soon as I request a page I get this:
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Fel vid kompilering:C:\product\10.1.3.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\application-deployments\orabpel\console_war\persistence\_pages\\_login.java
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heapThis is strange since at the time there is >1.4 GB of virtual memory and 0.9 GB of physical memory available.
And according to the task manager:
Commit charge limit = 2728684
Physical memory total = 2096496
I am using Windows XP Professional, version 2002, service pack 2.

Sun Solaris8 'Aide' Installation

Hi There,
I am a new with Sun Solaris baby. I mean totally know nothing about Solaris. Now I have 3 Sun Solaris8 to manage. Some one recommeded me to install 'Aide' (Advanced intrusion detection environment). I installed it fine on one of my box. The problem now is I have no idea how does it work. The 'Aide' manual is great, I mean I can't find what to do with this manual. Can some one help me where to start with this software? And what steps need to be done after the installation.
Here what I did:
1. Installed 'aide' - OK!
2. Tried: aide --init - ERROR: "can't find aide.conf in /usr/local/etc"
3. STUCK!
Please share with me your good 'aide.conf' file. Thanks!
Stephanie

Although this really has nothing to do with Solaris I can give you one hint....
1. Installed 'aide' - OK!
2. Tried: aide --init - ERROR: "can't find aide.conf
in /usr/local/etc"
3. STUCK!I'd say add an aide.conf file in /usr/local/etc. You might like to check this website for some good examples: http://www.cs.tut.fi/~rammer/aide/manual.html.
Seriously; if you can't create your aide conf file yourself you're probably better off not using aide instead of creating a false feeling of safety. Safety isn't obtained by installing whatever software package, its by having a good understanding of the way things work and what they are doing.

Office 2013 Installation stuck on Windows 8.1 ESXi virtual machine

When I try to install Office 2013 32 Bit - on a Windows 8.1 64 Bit Virtual Machine that is hosted on ESXi Host server .....it stucked installing it for hours and hours without finishing ....... I tried to install locally on a mounted ISO image with the same
result !!
It happens on many machines not a specific one !
Does any one know what can be a reason for that ?!
Hossam Wael Elmosallamy (IT Support Engineer-ECC Solutions) MCSE - CCNA [email protected] Mobile:(011)-49464671 www.eccsolutions.net "Experience Reliability&quot

Hi,
At which specific percentage will the setup hang? Vuk is right above, but it's really hard to say what's the cause of your case.
Please first take a look at this KB article and see if it is helpful for you:
Microsoft Office 2013 or Office 365 hangs during setup
I would suggest you go and check the setup log files to troubleshoot the issue, which is the best way to narrow down the issue I think.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can't install Virtual PC Integration Components wXPSP3 virtual machine

Install fails when trying to install one of the drivers - vpcgbus.inf. I tried installing the driver manually and I get this error:
Fatal error during install. The device status in the properties of the devices are:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Any ideas?
Below is the relevant part of the log file from the MSI install
ction 16:08:31: RegisterProduct. Registering product
RegisterProduct: {B0950C40-269A-11DD-BD0B-0800200C9A66}
Action 16:08:31: PublishFeatures. Publishing Product Features
PublishFeatures: Feature: VAudio
PublishFeatures: Feature: VMServicesFeature
PublishFeatures: Feature: VideoDriver
PublishFeatures: Feature: OSSupportFiles
PublishFeatures: Feature: MouIntFeature
PublishFeatures: Feature: VPCBus
PublishFeatures: Feature: VPCUSB
PublishFeatures: Feature: VWAGPDll
PublishFeatures: Feature: VWARedirectExe
Action 16:08:31: PublishProduct. Publishing product information
1: VMAdds.ico
1: {B0950C40-269A-11DD-BD0B-0800200C9A66}
Action 16:08:31: CA_RollbackInstallWindowsNTVMServicesDriver.
Action 16:08:31: CA_RollbackInstallVideoDriver.
Action 16:08:31: CA_RollbackInstallVPCBusDriver.
Action 16:08:31: CA_RollbackEnableAllRAILSettings.
Action 16:08:31: CA_ChangeVMServicesServiceRecoveryOptions.
Action 16:08:31: CA_InstallVideoDriver.
Action 16:08:38: CA_RollbackInstallMouseIntegrationFilterDriver.
Action 16:08:38: CA_RollbackInstallVPCUSBDriver.
Action 16:08:38: CA_InstallMouseIntegrationFilterDriver.
Action 16:08:39: CA_DisableVAudio.
Action 16:08:40: CA_InstallVPCBusDriver.
VPCBUS: Done Get System Folder Location
VPCBUS: UpdateDriverForPlugAndPlayDevices using C:\Program Files\Virtual PC Integration Components\VPCGBus.inf
VPCBUS: UpdateDriverForPlugAndPlayDevices failed with 1603
Action ended 16:08:49: InstallFinalize. Return value 3.
Action 16:08:49: Rollback. Rolling back action:
Rollback: CA_InstallVPCBusDriver
Rollback: CA_DisableVAudio
Rollback: CA_InstallMouseIntegrationFilterDriver
Rollback: CA_RollbackInstallVPCUSBDriver
Rollback: CA_RollbackInstallMouseIntegrationFilterDriver
Rollback: CA_InstallVideoDriver
Rollback: CA_ChangeVMServicesServiceRecoveryOptions
Rollback: CA_RollbackEnableAllRAILSettings
Rollback: CA_RollbackInstallVPCBusDriver
VPCBUS: SetupCopyOEMInf failed with 2
Rollback: CA_RollbackInstallVideoDriver
Rollback: CA_RollbackInstallWindowsNTVMServicesDriver
VMSRVC_Uninstall: Could not get driver handle.
Rollback: Publishing product information
Rollback: Publishing Product Features
Rollback: Registering product
Rollback: Starting services
Rollback: Installing new services
Rollback: Writing system registry values
Rollback: CA_ExecuteCDEjectNT
Rollback: Copying new files
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Rollback: CA_RestoreMouseDriverOnMajorUpgrade
Action ended 16:08:57: INSTALL. Return value 3.

You are a life saver. I had the same issue. At very last step my installation was rolling back. ... following your steps fixed the issue.... thank you so much...
SSIS-Tutorials-FAQs |
Convert DTS to SSIS |
Document SSIS |
SSIS Tasks |
Real-time SSIS Monitoring

Oracle Portal Virtual Host Enhacement for Multiple Virtual Hosts

I open the TAR Number: 4326752.996
The TAR is related to " REQUEST ASSISTANCE FOR MULTIPLE VIRTUAL HOSTS AND MULTIPLE PAGE GROUPS CONFIG. "
This is the Scenario: We Have Oracle Portal installed in a single Box. yes I know I know... but Not everybody is Yahoo or Google for Clusters and all the good stuff, we just want our website managed by Oracle Portal since all our ERP is running Oracle Database. Anyway. 1 Box running Oracle Portal Infrastructure and MidTier.
It turns out that our previous configuration we have the LAMP Solution with PHP, Apache with Virtual Servers configuration very trivial for a regular web server however we have about 6 Virtual domains.
For example:
www.abc.com
www.def.com
www.ghi.com
www.jkl.com
www.mno.com
www.pqr.com
We also like to post all our Intranet Information in this great Portal:
http://intranet.com
Where intranet.com is the same server but setup in our Internal DNS without be a Real Internet Register Domain.
So bottom line we start doing great with Install our single box install, later [GRRRRRR does not come by default in port 80 GRRRRRR, ok need to move and setup the virtual host to resolve our main External website www.abc.com ]
For starters ok it worked we have our main website running Oracle Portal.
Now is time to go to the step number 2.
Setup another Page Group in Portal to be the Page_Group_INTERNAL.
I figure if Apache can setup Virtual Hosts pointing to Independent parts of the File System without be shared. I was expecting some kind of custom configuration where I can setup httpd.conf to point to some specific PageGroups to make sure
www.abc.com => Page_Group_External
never share information with:
intranet.com => Page_Gorup_Internal
My TAR was very quick closed with the Argument that is not what It supposed to do.
Since a virtual host is a common thing to do on Linux and Apache, I wonder if You guys could list this as one of the default features to have multiple virtual domains assosiated with Page Groups that they never talk or share Resources I think that would be really great.
In the mean time I guess we have no option but to put a password for every internal page or take the risk of share our Information to the Internet. Perhaps designate another box with Oracle Portal but In that case Is not really cost/bennefit to use a killer technology for our external site since we just have no more than 30 pages.
Anyway just figure drop you guys a note any advise will be really appreciated.
Best Regards Dino.

Hi Martin,
1. To change the target URL of KM resources you can to the following:
Access the URL Generation Service Configuration by navigating to:
System Administration -> System Configuration -> Knowledge Management -> Configuration
Content Management -> Global Services -> URL Generator Service
Change the Host property to "portal.company.com".
2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
<Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
<%
//Send the redirect using server redirection (not client script)
//This will also send the HTTP GET parameters
String queryString = request.getQueryString() ;
if (queryString==null ) {
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
} else {//redirect with HTTP GET parameters
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
%>
Hope this helps,
Robert

Creating a personal virtual desktop collection - no existing virtual desktops listed

I have 2 windows server 2012 hosts in a failover cluster. This cluster is for RDS and VDI. Attempting to create a virtual desktop collection and there are no existing virtual desktops to select, even though i have created many from a template
via System Center VMM 2012 sp1.

Hi,
Thanks for your comment. Sorry for late response. Do you got any solution?
Please check below link for detailed information and try to reconfigure and verify whether it getting worked or not.
Windows 8 / Windows Server 2012: VDI Personal Desktop Collections
http://blogs.technet.com/b/askperf/archive/2012/11/01/windows-8-server-2012-vdi-personal-desktop-collections.aspx
Personal Virtual Desktops
http://blogs.msdn.com/b/rds/archive/2009/11/16/personal-virtual-desktops.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Add network card to virtual machine and all available virtual networks aren't showing

Have a Hyper V 2012 cluster....we have a network card cabled for our DMZ network ...it's enabled.
Under a host in cluster in Virtual Switch Manager we have the virtual switch configured as external and it matches up with NIC number in the OS network connections...NIC 9. It's configured like the other virtual switches that are showing.
On our Hyper V Mgr console...under VM Networks..the DMZ network shows...I checked...settings same as other networks.
Still on our Hyper V Mgr console..under Logical Networks...the DMZ network shows...I checked...settings same as other networks.
When we go into Virtual Machine Mgr...hardware configuration for VM we created...add network adapter...the DMZ network doesn't show up in the list for VM networks so we can't assign IP or really add NIC in general.
I was able to go to an actual Hyper V host...under Hyper V Mgr that the VM was running on this particular host and I was able to add a network card/virtual switch..VM can ping devices...however if I go into the Hyper V Mgr in the Hyper V Mgr server and go
to properites of VM...a NIC is not listed.

Have a Hyper V 2012 cluster....we have a network card cabled for our DMZ network ...it's enabled.
Under a host in cluster in Virtual Switch Manager we have the virtual switch configured as external and it matches up with NIC number in the OS network connections...NIC 9. It's configured like the other virtual switches that are showing.
On our Hyper V Mgr console...under VM Networks..the DMZ network shows...I checked...settings same as other networks.
Still on our Hyper V Mgr console..under Logical Networks...the DMZ network shows...I checked...settings same as other networks.
When we go into Virtual Machine Mgr...hardware configuration for VM we created...add network adapter...the DMZ network doesn't show up in the list for VM networks so we can't assign IP or really add NIC in general.
I was able to go to an actual Hyper V host...under Hyper V Mgr that the VM was running on this particular host and I was able to add a network card/virtual switch..VM can ping devices...however if I go into the Hyper V Mgr in the Hyper V Mgr server and go
to properites of VM...a NIC is not listed.

"Virtual Hard Disks" vs. 'Virtual Machines"

Under Hyper-V Manager, right-click HOST PC, select "Hyper-V" settings. Under Server is shown
Virtual Hard Disks (....path....) and Virtual Machines (..path...)
What is the difference between those two options and why are seperate paths offered? (In the past I stored all VMs
in a folder called "C:\VM\<servname>" and this seemed to work fine.)
TIA,
barkingdog

These are just default paths for new files. While some users keep all these files together - others like to have VHDs on a seperate disk to VM configurations.
Cheers,
Ben

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

Device Driver Installation on Virtual PC XP mode

Hi,
I am having Windows 7 Professional setup. I have installed Windows Virtual PC XP Mode on it. I need to access USB for connecting my Windows Embedded device with Visual Studio Platform Builder which has installed in XP mode. Using USB over network
tool i have tried to make the USB device to be accessible from XP mode and tried to install APX USB driver in Virtual PC.
I got this notification from the installation setup "Could not start the Hardware" . Also checked this USB device installation with other XP pc. There it worked fine.
Is there any option to make the USB device accessible from virtual PC ?
Best Regards,
Dinesh

Hi,
The USB device might need to be redirected:
We may take a look at the following article about USB device usage in Virtual PC:
Use a USB device in a virtual machine
To redirect a USB device to a virtual machine
Attach the device to the physical computer and turn on the device.
From the virtual machine window, click USB and then click
Attachdevice name. Windows looks for and tries to install the device driver in the guest operating system. You also can install the driver from the Internet or from a CD.
After the driver is installed, you can use the USB device from within the virtual machine the same way as you would on a physical computer. However, USB devices that are connected using these steps are not shared, so they must be released from one operating
system to be available for use on the other operating system.
To make the USB device available on the host operating system, release it from the virtual machine. From the virtual machine window, click
USB and then click Releasedevice name.
Best regards
Michael Shao
TechNet Community Support

Live Installer built on Virtual Machine

Hello,
I installed Arch on vmware fusion, with the attempt of setting up a system with my customized services ( ssh, ftp, among others ), and in the process of such learning about the distro.
In the end, I will like that once I am comfortable with my Arch setup in the virtual machine, that I could replicate the same into a real physical machine.
So, my question will be whether the Live CD create options available for Arch will allow me to do so, and if there may be any limitations since I will create the system "template" in a virtual machine.
Is there any recommended Live installer creator? Should I worry about virtual and physical hardware differences in specs/sizes, etc?
Thanks,

you should be able to dd the virtual blockdevice to a physical one, and increase the size of the last partition and filesystem to completely fill the disk.
then rebuild the initcpio.
if you have lvm, it's easier of course.
you can also make filesystems on the physical hardware, install grub in there, and rsync everything

VMWare: 1 Oracle installation per virtual server, or 1 separate install

The scenario is that we are going to put our support benches on VMware.
The question is: should we have 1 oracle installation per virtual server or a separate virtual server for oracle.
If we go for the 1 oracle installation per virtual server, this mimics our customer environment.
If we install oracle separately, then we have to run two virtual machines. One for Oracle(with one instance per customer) and one for the Product which connects to the appropriate instance.
Looking at it I'm inclined to go for the 1 orcale installation per virtual server, as this will allow for easier maintenance and upgrade paths.
Apart form disk space , are there any other drawbacks?
Are there any advantages to having oracle on a separate virtual machine?

VMWare is not supported for Oracle, so if this is to mimic a customer environment, then you should be aware of this. In my personal experience I have not seen any noticeable difference from the testing and learning point of view.
Installing Oracle on VMWare at the end of the day will consume the resources of the server where the VM is hosted, so it is all up to the CPU and memory resources you have in your host server. A drawback is the hard disk speed, the lower the more noticeable performance reduction, so be aware of this. It is advisable, you should make sure you have installed the VMWare tools.
~ Madrid
http://hrivera99.blogspot.com/

Aid installation of virtual 6,1 PC or virtual PC 7,0 in PowerBook G4

Similar Messages

Maybe you are looking for