AIM account in Messages for osx 10.8 problems

AIM account in Messages for osx 10.8 is continually connecting and disconnecting in Messages for Mac. I have Mountain Lion 10.8.2 installed on a MacBook Pro 15 inch (10.8.2 installed over 10.7.4) with messages connections to AIM always working without a hitch, however, brand-new iMac 27 inch AIM and migrated home folder (using the same network connections) is continually connecting and disconnecting every 30 seconds or so. I have tried to delete the preferences, reinstall Mountain Lion using the recovery partition, erasing the disc and re-migrating but no success either. The only way I can get any use out of this AIM account is to keep the messages references open on the desktop and continually change the server settings between with and without SSL. All suggestions would be welcome.

Thanks for the suggestion, tried that empty the trash rebooted the system but no change… messages still connects and disconnects continuously every couple of minutes more or less :-(. What is baffling is that on a MacBook Pro using the same network connections messages as solid as a rock but my new iMac isn't. Tried to reinstall mountain lion using the recovery partition but no success either.

Similar Messages

AIM account in Messages for osx 10.8

AIM account in Messages for osx 10.8 is connecting and disconnecting in Messages for Mac.

Thanks for the suggestion, tried that empty the trash rebooted the system but no change… messages still connects and disconnects continuously every couple of minutes more or less :-(. What is baffling is that on a MacBook Pro using the same network connections messages as solid as a rock but my new iMac isn't. Tried to reinstall mountain lion using the recovery partition but no success either.

AIM account on Messages keep going offline

Hello,
I recently installed Mountain Lion on my iMac (iMac10,1) and added my AIM account to Messages.
When I am using Messages, my AIM account frequently goes offline by itself (and sometimes reconnects again).
I was wondering if this has happened to anyone else and if there is a fix.
Thank you,

Ive had this problem as well. I have four accounts two of which are yahoo accounts, 1 gmail, and 1 icloud. I have found that when you go to system preferences and then mail,contacts... and you click on details and retype your password it usually works. If that doesn't work though go to your email providers page and log in there and make sure your proxy settings are correct. Step two solved my issue. Hope this works for ya!

HT5395 Send as SMS on Messages for OSX

Is there any way to 'Send as SMS' from messages for Mac as there is on iPhone? I have a number of contacts that messages detects as iMessage but is unable to send. A popup advises that the recipient is not set up for iMessage, but no option is given to send as an SMS, resulting is me having to do it from my phone.

On your iPhone under Settings turn on Send as SMS (when iMessage isn't available).
The following is from the Messages Help file:
To make and receive SMS and MMS messages on your Mac, you need an iPhone with iOS 8 that’s signed into iMessage with the same Apple ID. To send an SMS message, enter a contact or a person’s phone number, enter your text, then press Return. Your SMS and MMS messages appear on your Mac automatically.

Custom Error Messages for Database Constraint Violations Problem

Hi
I have added a custom message bundle for the model project as explained in
37.8.3 in the Fusion Developer's Guide - How to customize error messages for database constraint violations.
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcadvgen.htm#BABEFGCI
Constraint Name : SYS_C0018574
And I have following CustomErrorMessages class
public class DBCustomErrorMessages extends ListResourceBundle {
    private static final Object[][] sMessageStrings =
        new String[][] { { "SYS_C0018574",
                           "Existing Record Found" } };
    protected Object[][] getContents() {
        return sMessageStrings;
}This works fine when I run application model and adding records to vialate the constraint. So it gives me following message
(oracle.jbo.DMLConstraintException) Existing Record FoundBut when run ui project it does not fire.
Still it gives the message
ORA-00001: unique constraint (CCBS2.SYS_C0018574) violatedCould you please shed some light?
Edited by: deshan on Mar 15, 2011 11:28 AM

Please see the image.
http://4.bp.blogspot.com/-Fna66p-W5Jw/TX7uSQqqBtI/AAAAAAAAAH0/D1APg6oAIxI/s1600/1.JPG
Error in Application Module ORA-00001: unique constraint (CCBS2.SYS_C0018574) violated exception is different from ui project.
Any hint?
Thanks
deshan
Edited by: deshan on Mar 15, 2011 10:16 AM

How can I add a Google account not connected to a GMail account to Messages in OSX Mountain Lion?

With iGoogle going offline soon, and being myself averse to using Google+ for social networking due to what I perceive as a blatant disregard for my privacy, I'm trying to save my few Gchat contacts, as I don't have many other ways to contact these specific people. However, I'm having trouble connecting my Gchat (or Google Talk if you prefer the term) to Messages. It doesn't recognize that my google account is tied to a verizon email address, not a gmail address, and refuses to acknowledge my password as correct (even though I typed it correctly at least five times trying).
I haven't seen anyone else having this problem, and I'd prefer to call customer support about this, but this seems to be the next best option.

Hi,
iChat and Messages (and for that matter any other Jabber capable App) will not accept non Google Mail Google IDs as Google Talk IDs
When Google launched Google Talk it was only for those IDs issued under @googlemail.com or @gmail.com that were eligible.
Later they allowed other Google IDs to Chat but only from Web Browser Logins.
There was a period when they did seem to expand the non Googlemail IDs into the GoogleTalk fold for external apps to also allow access but this was dropped after a while.
10:11 pm Thursday; October 3, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Audio Messages in iOS auto expire as expected, but they keep saving automatically on Messages for OSX

Hi all,
This morning I was playing around with audio messages with a friend on our iPhones. Everything was working fine. We were sending messages just fine, receiving them just fine, and they were auto-expiring as expected.
Then once I turned on my computer, I noticed that every time they sent an audio message it would give me a Messages notification on my desktop telling me they sent an attachment. I didn't think much of it because I figured that it was just Messages staying in sync with our conversation over iOS.
But then they said it started giving them the snapchat-style notifications saying that I was saving their audio messages. Sure enough when I opened Messages, they were all there.
I dug around the options but couldn't find anything relating to the auto-expiring voice messages. How do I turn this on or toggle it so that attachments people send me that are meant to auto-expire don't get saved?
Thanks!

Hi,
Is this an iOS 8 feature that is waiting for Yosemite ?
If it is It cannot be discussed here and Apple have other places to do that and doing so may break an NDA that you might have in place.
8:42 pm Saturday; October 4, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How do i videochat with multiple people when using my aim account in messages?

i am on messages and looking at my buddy list but it only shows that i can singular video chat, not with multiple people.

in the general tab of your messages preferences is it set to AIM or Messages?

Re: Impossible to create a AIM account in Messages

ANy one pls hlp me. My 5s left speaker not working. All sounds come froM right speaker. Pls hlp me

There is only 1 speaker on the iPhone.
The other one is a microphone.
the title of your post has nothing to do with your post, are you a troll?

Startup error messages for Pulseaudio initialization, dbus problem?

I am experiencing some lag on startup when logging in with my user. I suspected something going wrong when initializing my autostart daemons. Indeed, Pulseaudio seems to have some trouble (but the sound output works just fine).
Here is the tail of my /var/log/messages.log:
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: ""): initialization failed.
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] main.c: Module load failed.
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: ""): initialization failed.
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] main.c: Module load failed.
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:40:08 localhost pulseaudio[913]: [pulseaudio] pid.c: Daemon already running.
There seems to be some dbus problem.
Here is /var/log/daemons.log:
Sep 24 11:36:04 localhost [ 0.843288] systemd-udevd[48]: starting version 189
Sep 24 11:36:04 localhost [ 4.252979] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
Sep 24 11:36:04 localhost [ 4.261977] systemd[1]: Inserted module 'autofs4'
Sep 24 11:36:04 localhost [ 4.262169] systemd[1]: Set hostname to <alppc>.
Sep 24 11:36:04 localhost [ 4.334060] systemd[1]: Cannot add dependency job for unit pulseaudio.service, ignoring: Unit pulseaudio.service failed to load: No such file or directory. See system logs and 'systemctl status pulseaudio.service' for details.
Sep 24 11:36:04 localhost [ 4.334069] systemd[1]: Cannot add dependency job for unit hal.service, ignoring: Unit hal.service failed to load: No such file or directory. See system logs and 'systemctl status hal.service' for details.
Sep 24 11:36:04 localhost [ 4.334075] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
Sep 24 11:36:04 localhost [ 4.334197] systemd[1]: Socket service syslog.service not loaded, refusing.
Sep 24 11:36:04 localhost [ 4.495856] systemd-udevd[155]: starting version 189
Sep 24 11:36:05 localhost connmand[459]: Checking loopback interface settings
Sep 24 11:36:05 localhost connmand[459]: System hostname is alppc
Sep 24 11:36:05 localhost connmand[459]: Failed to open RFKILL control device
Sep 24 11:36:05 localhost connmand[459]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Sep 24 11:36:05 localhost connmand[459]: eth0 {create} index 2 type 1 <ETHER>
Sep 24 11:36:05 localhost connmand[459]: eth0 {update} flags 4098 <DOWN>
Sep 24 11:36:05 localhost connmand[459]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:36:05 localhost connmand[459]: eth0 {newlink} index 2 operstate 2 <DOWN>
Sep 24 11:36:05 localhost connmand[459]: Adding interface eth0 [ ethernet ]
Sep 24 11:36:05 localhost connmand[459]: eth0 {update} flags 36867 <UP>
Sep 24 11:36:05 localhost connmand[459]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:36:05 localhost connmand[459]: eth0 {newlink} index 2 operstate 2 <DOWN>
Sep 24 09:36:05 localhost rtkit-daemon[521]: Successfully called chroot.
Sep 24 09:36:05 localhost rtkit-daemon[521]: Successfully dropped privileges.
Sep 24 09:36:05 localhost rtkit-daemon[521]: Successfully limited resources.
Sep 24 09:36:05 localhost rtkit-daemon[521]: Running.
Sep 24 09:36:05 localhost rtkit-daemon[521]: Watchdog thread running.
Sep 24 09:36:05 localhost rtkit-daemon[521]: Canary thread running.
Sep 24 11:36:05 localhost polkitd[525]: started daemon version 0.105 using authority implementation `local' version `0.105'
Sep 24 11:36:06 localhost connmand[459]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:36:06 localhost connmand[459]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Sep 24 11:36:06 localhost connmand[459]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:36:06 localhost connmand[459]: eth0 {newlink} index 2 operstate 6 <UP>
Sep 24 11:36:06 localhost connmand[459]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:36:06 localhost connmand[459]: Skipping disconnect of carrier, network is connecting.
Sep 24 11:36:06 localhost connmand[459]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:36:07 localhost connmand[459]: Setting domainname to fritz.box
Sep 24 11:36:07 localhost connmand[459]: Deleting host route failed (No such process)
Sep 24 11:36:07 localhost connmand[459]: eth0 {add} address 192.168.178.39/24 label eth0 family 2
Sep 24 11:36:07 localhost connmand[459]: eth0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Sep 24 11:36:07 localhost connmand[459]: eth0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Sep 24 11:36:07 localhost connmand[459]: eth0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:36:07 localhost connmand[459]: Setting default gateway route failed (File exists)
Sep 24 11:36:08 localhost connmand[459]: eth0 {add} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:36:08 localhost connmand[459]: Client-IP: 62.143.54.223
Sep 24 11:36:08 localhost connmand[459]: Client-Country: DE
Sep 24 11:36:08 localhost connmand[459]: eth0 {del} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:38:23 localhost dbus[433]: [system] Activating systemd to hand-off: service name='org.freedesktop.ColorManager' unit='colord.service'
Sep 24 11:38:23 localhost [ 0.849968] systemd-udevd[48]: starting version 189
Sep 24 11:38:23 localhost [ 4.136460] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
Sep 24 11:38:23 localhost [ 4.145534] systemd[1]: Inserted module 'autofs4'
Sep 24 11:38:23 localhost [ 4.145728] systemd[1]: Set hostname to <alppc>.
Sep 24 11:38:23 localhost [ 4.217389] systemd[1]: Cannot add dependency job for unit pulseaudio.service, ignoring: Unit pulseaudio.service failed to load: No such file or directory. See system logs and 'systemctl status pulseaudio.service' for details.
Sep 24 11:38:23 localhost [ 4.217398] systemd[1]: Cannot add dependency job for unit hal.service, ignoring: Unit hal.service failed to load: No such file or directory. See system logs and 'systemctl status hal.service' for details.
Sep 24 11:38:23 localhost [ 4.217404] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
Sep 24 11:38:23 localhost [ 4.217523] systemd[1]: Socket service syslog.service not loaded, refusing.
Sep 24 11:38:23 localhost [ 4.394737] systemd-udevd[155]: starting version 189
Sep 24 11:38:23 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.systemd1'
Sep 24 11:38:23 localhost connmand[490]: Connection Manager version 1.6
Sep 24 11:38:23 localhost connmand[490]: Checking loopback interface settings
Sep 24 11:38:23 localhost connmand[490]: System hostname is alppc
Sep 24 11:38:23 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Sep 24 11:38:23 localhost dbus[433]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
Sep 24 11:38:23 localhost connmand[490]: Failed to open RFKILL control device
Sep 24 11:38:23 localhost connmand[490]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Sep 24 11:38:23 localhost connmand[490]: eth0 {create} index 2 type 1 <ETHER>
Sep 24 11:38:23 localhost connmand[490]: eth0 {update} flags 4098 <DOWN>
Sep 24 11:38:23 localhost connmand[490]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:38:23 localhost connmand[490]: eth0 {newlink} index 2 operstate 2 <DOWN>
Sep 24 11:38:23 localhost connmand[490]: Adding interface eth0 [ ethernet ]
Sep 24 11:38:23 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
Sep 24 11:38:23 localhost dbus[433]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Sep 24 11:38:23 localhost connmand[490]: eth0 {update} flags 36867 <UP>
Sep 24 11:38:23 localhost connmand[490]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:38:23 localhost connmand[490]: eth0 {newlink} index 2 operstate 2 <DOWN>
Sep 24 11:38:23 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Sep 24 11:38:23 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 24 11:38:23 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 24 11:38:24 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Sep 24 11:38:24 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Sep 24 09:38:24 localhost rtkit-daemon[551]: Successfully called chroot.
Sep 24 09:38:24 localhost rtkit-daemon[551]: Successfully dropped privileges.
Sep 24 09:38:24 localhost rtkit-daemon[551]: Successfully limited resources.
Sep 24 09:38:24 localhost rtkit-daemon[551]: Running.
Sep 24 09:38:24 localhost rtkit-daemon[551]: Canary thread running.
Sep 24 09:38:24 localhost rtkit-daemon[551]: Watchdog thread running.
Sep 24 11:38:24 localhost dbus[433]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Sep 24 11:38:24 localhost polkitd[555]: started daemon version 0.105 using authority implementation `local' version `0.105'
Sep 24 11:38:24 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 24 11:38:24 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Sep 24 11:38:24 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 24 11:38:24 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 24 11:38:25 localhost connmand[490]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:38:25 localhost connmand[490]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Sep 24 11:38:25 localhost connmand[490]: eth0 {newlink} index 2 address 1C:6F:65:C4:12:E9 mtu 1500
Sep 24 11:38:25 localhost connmand[490]: eth0 {newlink} index 2 operstate 6 <UP>
Sep 24 11:38:25 localhost connmand[490]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:38:25 localhost connmand[490]: Skipping disconnect of carrier, network is connecting.
Sep 24 11:38:25 localhost connmand[490]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Sep 24 11:38:26 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 24 11:38:26 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 24 11:38:26 localhost connmand[490]: Setting domainname to fritz.box
Sep 24 11:38:26 localhost connmand[490]: Deleting host route failed (No such process)
Sep 24 11:38:26 localhost connmand[490]: eth0 {add} address 192.168.178.39/24 label eth0 family 2
Sep 24 11:38:26 localhost connmand[490]: eth0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Sep 24 11:38:26 localhost connmand[490]: eth0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Sep 24 11:38:26 localhost connmand[490]: eth0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:38:26 localhost connmand[490]: Setting default gateway route failed (File exists)
Sep 24 11:38:26 localhost connmand[490]: eth0 {add} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:38:26 localhost connmand[490]: Client-IP: 62.143.54.223
Sep 24 11:38:26 localhost connmand[490]: Client-Country: DE
Sep 24 11:38:26 localhost connmand[490]: eth0 {del} route 81.169.141.235 gw 192.168.178.1 scope 0 <UNIVERSE>
Sep 24 11:38:27 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 24 11:38:27 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 24 11:38:28 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Sep 24 11:38:28 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Sep 24 09:38:49 localhost rtkit-daemon[551]: Warning: PolicyKit call failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Sep 24 11:38:49 localhost dbus[433]: [system] Failed to activate service 'org.freedesktop.ConsoleKit': timed out
Sep 24 11:38:51 localhost dbus[433]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Sep 24 11:38:51 localhost dbus[433]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Sep 24 11:40:07 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Sep 24 11:40:07 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep 24 11:40:07 localhost dbus[433]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Sep 24 11:40:07 localhost udisksd[839]: udisks daemon version 1.94.0 starting
Sep 24 11:40:07 localhost dbus[433]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Sep 24 11:40:07 localhost udisksd[839]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Sep 24 11:40:08 localhost udisksd[839]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD1600ADFD_60NLR5_WD_WMAP42316678: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Sep 24 09:50:09 localhost udisksd[839]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD1600ADFD_60NLR5_WD_WMAP42316678: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
And here is my /var/log/errors.log:
Sep 24 11:36:04 localhost [ 4.334197] systemd[1]: Socket service syslog.service not loaded, refusing.
Sep 24 11:36:04 localhost kernel: [ 5.310147] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
Sep 24 11:36:04 localhost kernel: [ 5.310444] CX24123: wrong demod revision: 87
Sep 24 11:36:05 localhost connmand[459]: Failed to open RFKILL control device
Sep 24 11:36:07 localhost connmand[459]: Deleting host route failed (No such process)
Sep 24 11:36:07 localhost connmand[459]: Setting default gateway route failed (File exists)
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: ""): initialization failed.
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Sep 24 11:36:31 localhost pulseaudio[520]: [pulseaudio] main.c: Module load failed.
Sep 24 11:38:23 localhost [ 4.217523] systemd[1]: Socket service syslog.service not loaded, refusing.
Sep 24 11:38:23 localhost kernel: [ 5.220124] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
Sep 24 11:38:23 localhost kernel: [ 5.220487] CX24123: wrong demod revision: 87
Sep 24 11:38:23 localhost connmand[490]: Failed to open RFKILL control device
Sep 24 11:38:26 localhost connmand[490]: Deleting host route failed (No such process)
Sep 24 11:38:26 localhost connmand[490]: Setting default gateway route failed (File exists)
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: ""): initialization failed.
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Sep 24 11:38:51 localhost pulseaudio[550]: [pulseaudio] main.c: Module load failed.
Sep 24 11:40:08 localhost pulseaudio[913]: [pulseaudio] pid.c: Daemon already running.
What is going on here? Could someone explain how to resolve this issue?
Last edited by Alp (2012-09-24 07:56:44)

# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(syslog-ng !network dbus hal connmand ntpd !hwclock crond @cupsd @samba @httpd @mysqld @nginx pulseaudio @alsa @mpd @mpdscribble !slim)
#DAEMON_LOCALE="yes"
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
interface=eth0
# address=
# netmask=
# gateway=

Any advantages to using .mac vs. AIM account?

I have both a .mac account and an AIM account. Currently I use my AIM account almost exclusively for iChat, and I was just wondering if there are any advantages to using my .mac over the free AIM.
Also if friends of mine wanted to add my .mac name to their AIM what information would I give them? just [email protected]?

hi Sup909,
Encryption. Mac to Mac with both having @mac names
Otherwise, No.
9:15 PM Saturday; December 2, 2006

OS X Yosemite messages losing connectivity in afternoons for AIM accounts

Not sure why messages is dropping connections to my AIM account buddies in afternoons, but this is a pattern since the Yosemite update. Application restart doesn't fix it.
Also, I am annoyed that buddies list isn't integral to the Messages window. That separate window listing the buddies doesn't work well in full screen environs for those in office scenes that rely on the bonjour list to see who is at work, etc.

It's more related to sleep status disconnecting AIM accounts rather than time of day...in my case after lunch is when I lose AIM connectivity. I still have Bonjour connections. Need a fix!

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

Can't Set Proxy Server For AIM Account

Hi!
In the Messages application, the AIM account has a Server Settings tab where one can opt to connect using a proxy. However, with Mavericks I have found that anything I enter in that field is instantly wiped out. The console logs a message each time:
11/21/13 3:29:25.055 PM Messages[5215]: [Warning] *** API client requested a modification of key "ProxyHost" to be "myproxy", this is being ignored, please file a radar
where "myproxy" is anything one enters into the field.
Any advice?

Hi,
This issue goes way back in to the history of iChat.
It has never been that good at connecting using Proxies.
It has does slightly better if using the System Settings.
I don't use Proxies and so have never spent any time working though this.
Basically iChat and Messages connecting via a Buddy List is via the AIM servers but is almost Peer-to-Peer in process.
Connections are very linear particularly for Video and Audio chats to the extent that connecting to your router with Ethernet and Wifi is enough to cause issues.
Whilst starting up the app also contacts Apple to test bandwidth (Internet Speed) and support things ready for Video and Audio chats.
It is not just a case of Logging in to AIM.
8:59 pm Friday; November 22, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

AIM account frequently disconnects from Messages 7.0

So i got the new Macbook Pro Retina Display and i got the free upgrade from Lion to Mountain Lion. I filled in all my account details and all that on to my Messages and it works just fine, except for the fact that my AIM account disconnects frequently and for about 10 - 15 minute periods of time. It worked fine on the old iChat on my previous Macbook which was running Snow Leopard. Is anyone else getting this? Any solutions?
Thanks!

Hi,
I would start in Messages Menu > Preferences > Accounts and the AIM account in question
Log out (Untick the "Enable this Account" box).
Go to the Server Settings tab
Untick the SSL option.
The AIM SSL servers can drop the connection more often that the regular ones.
Also if the SSL connection is lost messages (or iChat) need manually reconnecting as a SSL reconnection is not automatic like the regular server is.
If that does not work I would delete the com.apple.ichat.AIM.plist
I would phrase the way to ge there as
In the Finder use the Go Menu
Hold down ALT key
Select the Library that appears
Open Preferences and find file
Drag to Trash
Restart Messages
8:39 PM Monday; September 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

AIM account in Messages for osx 10.8 problems

Similar Messages

Maybe you are looking for