Aim Login limit exceded error

Hi everyone,
I just got a mac about 2 weeks ago, and iChat used to work fine everywhere. However, as of yesterday, when i use iChat in my apartment it repeatedly logs in and disconnects. For those of you that use AIM, you know that when the password is wrong and you try to log in too many times in short succession, it prevents you from logging in for a few minutes.
Now, normally i would say ok the password has to be wrong, but it is automatically put in, and when i use it in class on the school's wireless network everything works fine.
I have recently disabled the auto login function so i can try it one at a time instead of having it rapid login. However it still doesnt work.
Specs are as follows:
MacBook Pro
Mac OS X 10.5.2
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
If i missed any information that needs to be cleared up let me know and i will try to update it.
Thank you all so much,
~Peter

Move on to this FAQ with all the options on symptoms around this Issue
http://discussions.apple.com/thread.jspa?threadID=1462798
Also go to iChat > Preferences > Accounts > Security and check that people have not become Blocked.
10:07 PM Tuesday; May 6, 2008

Similar Messages

  • Time limit exceeded error

    Hello All,
    I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
    I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
    Regards,
    Arpita.
    Moderator message: Welcome to SCN!
    Moderator message: Please Read before Posting in the Performance and Tuning Forum
    Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

    Hi Ramya,
       Your prog running in the back ground, so the time limit of the prog is exceded.  Go to sm37 see the prog running time if exceded correct the time.
    Regards
    Srinu

  • IChat and AOL/AIM Login Information

    When I log into iChat it brings up the bonjour list. Then when I change the option to my email address it prompts me to log into an AOL Instant Messenger account. When I type in my Apple ID and password it says my login ID or password is incorrect. I don't have an AOL account or login so I'm not sure what I should be putting in there. I have used my iChat before with no problem. Even though it has been over a year since I've last used it, it never asked for this type of information before.

    Hi,
    iChat was originally an AIM client  (Joined the AIM service)
    You could use an AIM name or at that time an Apple @mac.com name.
    Later MobileMe issued @Me.com names
    These stopped on the 30th June 2012.
    iCloud issued @Me.com have somewhat replaces MobileMe but you have to register.
    This may mean you have an iCloud issued Apple ID which you are using in iChat 5 or earlier - And it will not work.
    It may be that you have set up a new password with more than 16 characters (AIM Server Limit)
    10:31 PM      Thursday; September 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and and iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • AIM Login Failing

    When I try to log in to IChat/AIM I get the error message Auth:BadDbStatus Any ideas for the fix? Thanks, Mel

    Hi rbaezd,
    It works a bit like this.
    You log into a server at AIM called login.oscar.
    This sets a marker on another server Big.oscar that you are online. Another marker sets your Available/Away status.
    You Buddy List is held somewhere else and is fed back to you when you are online based on everyones elses big.oscar status.
    Now obviously AIM have back ups and also periodically they release screen names that seem to be inactive.
    It is this sorting that makes your Buddy List data base go out of synch hence the DB error message which can be different for different screen names from the same computer.
    Early Dec 2004 was a particularly bad time with this when AIM shut out all @mac users with names over a certain length.
    More recently it has been like today, where the numbers appear small and only for a few hours at most.
    You can in fact get feedabck from big .oscar to do this
    10:43 PM Thursday; February 23, 2006

  • Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

    One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
    "Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

    Its works for other users, its only happened for one specific user only?  I didn't check the APPSRV.LOG file?  what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

  • Error: You cannot login because an error occurred while retrieving the login URL. (WW

    Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
    Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
    Thoughts?

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • Time Limit exceeded error in R & R queue

    Hi,
    We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
    The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
    Any pointers on this would be of great help.
    Thanks in advance,
    Regards,
    Rasmi.

    Hi Rasmi
    I suppose that the usual answer would be to increase the timeout for the R&R queue.
    We have increased the timeout on ours to 60 mins and that takes care of just about everything.
    The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time 
    If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
    Regards
    James

  • TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login

    I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login.  Is there any way to fix this or did I just lose $50

    Report this here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • How to increase concurrent login limit from a user

    I'm getting a :"user limit reached" error from a certain telnet user, how do I check the limit and increase it?

    Hi Sowmya,
    You can use the FM 'BBP_READ_ATTRIBUTES'
    Pass the username in IV_USER
    IV_SCENARIO will have the value BBP
    and the value for IV_ATTR_SINGLE can be taken from the table T77OMATTR.
    You can also go thorugh the following link for getting help to call this FM:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/srm/codeSample2-Reporttodisplayuserattributes
    Thanks,
    Pradeep

  • You cannot login because an error occurred while retrieving the login URL.(WWC-41441)

    Hi,
    I have a Portal install with the following specifications:
    OS - Sun Solaris 2.6
    DB - 8.1.7.0.0
    iAS - 1.0.2.2
    Portal - 3.0.9.0.7
    It was working fine. Then the initjvm.sql that installs the JVM
    in the database was run. This was done as part of the steps
    required for enabling the UTL_SMTP. The script ran without any
    errors but after that Portal Login was failing with the following
    error:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    and there were no Java classes present in the Portal or SSO
    schema. To overcome this error I reloaded the SSOHash classes to
    Portal and SSO schemas and ran ssodatan. The script ran
    successfully and I was able to login to the Portal after that.
    However, if I login as the administrator and try to create or
    edit users from the Administer tab of Portal, the same error
    occurs again:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    I can programmatically add users using the Security APIs.
    The wwsec_enabler_config_info$ table of the Portal schema
    contains one row but the wwsec_enabler_config_info$ table of the
    SSO Schema contains no rows.
    This install of Portal is hosting a number of applications and as
    such running opca again is not an option.
    Any workaround for this?
    Thanks,
    Rupesh

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • After update 3.6.9 on 12/09/2010 can't login to gmail error 400

    After update 3.6.9 on 12/09/2010 can't login to gmail error 400 in the left top corner and a white page.
    I killed a lot of add-ons but stil no gmail. When using * IE Tab 2 Plug-in for Mozilla/Firefox I can login.

    Hello ,
    please clear your cache and cookies, by following these steps:
    #Open the Tools menu at the top of the Firefox window, select '''Clear recent history'''
    #In the ''Clear recent history'' window, select '''Everything''' from the dropdown list.
    #Click the arrow next to '''Details''' once, then check '''Cache''' and '''Cookies'''.
    #Now, click the '''Clear now''' button to clear history.

  • Can't get AIM login to work, AOL login works fine, AIM login does not

    I know this has been posted before but I cannot get this to work.
    My daughters AIM login is her AOL screen name.
    She can log in to AOL with her password with no problem,
    SHe can log in to AIM.com with her password with no problem
    But the ICHAT program cannot seem to log her in at all.
    the box comes up saying that either the password or screen name is incorrect.
    We tried the change to port 443 with no luck.
    As a test of the system, My own AOL screen name logs in to ichat fine.
    Any suggestions?

    My Apologies http://discussions.apple.com/thread.jspa?threadID=121885&tstart=50
    2:21 PM Saturday; November 17, 2007

  • License.Limit.Exceeded error with unlimited licence

    I am getting Licence.Limit.Exceeded errors when FMS had
    several hundred connections although I have unlimited connections
    licence. Because of this error, FMS rejected all further
    connections.
    Here is log:
    2009-01-30 20:50:41 11220 (i)2651182 (_defaultRoot_,
    _defaultVHost_) : Max connections allowed exceeds license limit.
    Rejecting connection to : chatapp/_definst_. -
    2009-01-30 20:50:41 11220 (w)2641213 Connection rejected by
    server. Reason : [ License.Limit.Exceeded ] : (_defaultRoot_,
    _defaultVHost_) : Max connections allowed exceeds license limit.
    Rejecting connection to : chatapp/_definst_. -

    Flash Media Interactive Server 3.0.1
    Unlimited connections and bandwidth license.
    And I only ran on this problem in some chat rooms
    (applications), others work well.

  • Administrative limit exceeded error

    On attempting an ldap search command as follows ./ldapsearch -z1000 -b "ou=People,o=abcd.com" "organizationalstatus=manager", I am getting "Administrative limit exceeded" error. The limit is set to 2000 in the console. any help is appreciated. Thanks

    hello,
    "Administrative limit " may be a SIZE limit , ENTRIES ( number of ) limit or SIZE ( output of ) limit:
    From "man" of ldapsearch:
    -l timelim time limit (in seconds) for search (default is no limit)
    -z sizelim size limit (in entries) for search (default is no limit)
    You can use these options when you search.
    You may also check the setting of 3 limits above with Admin Console:
    Open your directory server (name), Configuration Folder, Performance. On right panel check Client Control folder. You may see:
    Size limit
    Look-through limit
    Time limit
    Idle timeout
    � The look-through limit specifies the maximum number of entries that will be examined for a search operation.
    � The size limit specifies the maximum number of entries the server returns to the client application in response to a search operation.
    � The time limit specifies the maximum time the server spends processing a search operation.
    � The idle timeout specifies the time a client connection to the server can be idle before the server drops the connection.
    If you bind as Directory manager, you may use unlimited resources by default.
    Hello,
    silvio

  • Sap license error--error is "login not possible (error in license check)u0094

    Hi,
    I we are not able to login in our IDES r/3 system, it is showing “login not possible (error in license check)”, only sap*  is able to login . I have already applied sap license that will
    Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light.  I tried to del old one but system says through sap* not possible, only sys admin will do…..what I can do now..

    Hi,
    When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this  message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
    THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
    So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
    Select the expired license in menu goto EDIT->Delet license(shift+f2)
    kiran kumar.v

Maybe you are looking for