AIM2-CUE Error Language package install

Hi experts,
I am having the following problem:
Router 2851 with 124.24T IOS with CME 7.1.1
Modules: AIM2-CUE ver. 7.1.2
I need to install the Portuguese language pack and the command that i am using in the CUE CLI is:
software install add url ftp://ftpserveripaddres/cue-vm-pt_PT-langpack.nmx.7.1.2.prt1 username cisco password cisco
The result is this:
WARNING:: This command will install the necessary software to
WARNING:: complete a clean install. It is recommended that a backup be done
WARNING:: before installing software.
Would you like to continue?[confirm]
Downloading ftp cue-vm-pt_PT-langpack.nmx.7.1.2.prt1
Bytes downloaded : 37419891
Validating package signature ... done
ERROR: Invalid package. Please verify if this is a valid package file.
Can you please help me?
Best regards,
Nuno

Cannot not install the language .prt file directly like that.
Instead, install upgrade the language package .pkg, from there you will have a menu selection, and choose from there.

Similar Messages

5530 Mobile Dictionary Language Package Install Pr...

My girlfriend is going to work in Brussels for several months, and you know, the official language in Brussels is Dutch. For the convenience of her daily life in Brussels, yesterday I tried to install the Dutch language package for the Mobile Dictionary in her Nokia 5530. Unfortunately, I failed.
I tried step by step as following:
1. Download the Dutch language package (Nokia_Mobile_Dictionary_nl.SIS) to my laptop from the official website of Nokia
http://europe.nokia.com/support/download-software/mobile-dictionary
2. Copy the install file to memory card by usb cable.
3. Start install in 5530, where the problem occured
"Unable to open. File type not supported"
I repeated the procedure above in my 5800, everything is OK.
So now I am confused with this problem.
If you can give me some advice, it will be greatly appreciated.

It could be an issue with the file itself - try installing any other language to check if you still get a problem. If that works OK you'd have to contact Nokia and tell them of the issue.
I'm not sure why a fault with the phone would cause particular error message, there have been issues with s60 5th edition phones in the past, but they didn't give the same error. Nonetheless, it might be worth backing up the phone content with PC Suite, reformatting with *#7370# then trying to install the language again before restoring the backup.
For your information, Dutch isn't THE official language of Brussels, it's ONE OF the official languages of Brussels, the other being French. French is actually the most commonly spoken language in Brussels, and due to the large community of foreigners here to work in institutions like the EU, there are more people doing their day-to-day communications in English in Brussels than in Dutch. Nonetheless, some knowledge of one of the official languages is wise.

Maintainance tasks for language package installed

Hi All,
May I ask inputs regarding installing language package. Basically, below are my questions.
- Are there any maintainance activities required following installation of a language package in the system?
- Are there any annual support packs for language packages?
- Say our ECC is EHP5 and we installed new language in our system, then we upgraded the same system to EHP6. Are there any activities that needs to be performed because of the upgrade even if the language is already installed in the system prior to the upgrade?
- Do difference in language installed in the systems affect the copied xml file during upgrade? Meaning, say we have dev and QA ecc system. We created stack file for dev for the ehp6 upgrade. Using that stack xml, upgrade dev system. Then a decision is made to install new language in the system. Thus it is installed in upgrade dev, and not upgraded QA. Now, we copy the stack xml file use in dev to be converted for QA. Would there impact on the upgrade process?
I would appreciate your inputs on the queries. Thanks.
Regards,
Philip

Hi Philip,
- It depends on what you did exactly during this installation. Could you please list the steps taken?
- There are no annual support packs. Language packages are shipped with every release of a new Support Package, with updates and corrections of the existing content (if any).
- With SPs as with EhPs, you will need to reinstall the language files for your system. It is hopefully rather quick as a follow-up step (not saying that the initial language deployment is tedious and hard work, but... Well, yes, it is) if you have not performed any translation activities in your installation.
- I don't think so since languages do not seem to be included in the stack (which would actually be counter-productive, dangerous and a dozen unnamable negative linguistic adjectives).
Hope that helps!
Sylvain

Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO:    ...and 11.1.0.0...
00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO:    Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
00:02.870: INFO:    Windows 7 operating system detected.
00:02.886: INFO:    Service pack major: 1
00:02.886: INFO:    Service pack minor: 0
00:02.886: INFO:    Service pack name: Service Pack 1
00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO:    Waiting for 0 prerequisite downloads.
01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO:    Waiting for 0 language pack downloads.
01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO:    Waiting for Active Setup to complete.
02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO:    SQM Upload returned 403
02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO:    Released Internet Explorer Installer Mutex
Taweesak Archawamaitreekool

DISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you.   <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool

IE 10 and 11 error install failure ERROR: "Neutral package installation failed"

This is a 2008 R2 physical server with all available patches installed and SFC recently run.
00:00.000: ====================================================================
00:00.000: Started: 2014/01/16 (Y/M/D) 11:52:19.750 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\{user}\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO:    Previous version of Internet Explorer: 9.0.8112.16526
00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO:    ...and 11.1.0.0...
00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
00:00.016: INFO:    Operating System: Windows Server: 6.1.7601 (Service Pack 1)
00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.219: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.546: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE182A.tmp\Spelling_en.msu.
00:00.546: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.562: INFO:    Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE182A.tmp\Hyphenation_en.msu.
00:00.562: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.467: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:01.810: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:01.826: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE182A.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE182A.tmp\IE11-support\HardwareBlockingList.xml"
00:01.919: INFO:    Hardware support check succeeded. Installation will continue.
00:01.919: INFO:    Windows 7 operating system detected.
00:01.919: INFO:    Service pack major: 1
00:01.919: INFO:    Service pack minor: 0
00:01.919: INFO:    Service pack name: Service Pack 1
00:01.935: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >= 6.2.9200.16570 (True)
00:01.935: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16426 (True)
00:01.935: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18247 >= 6.1.7601.17727 (True)
00:01.966: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18229 >= 6.1.7601.17617 (True)
00:01.966: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >= 6.1.7601.17888 (True)
00:01.966: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:01.966: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:01.982: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >= 6.1.7601.18254 (True)
00:02.013: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >= 6.1.7601.18247 (True)
00:54.258: INFO:    Waiting for 0 prerequisite downloads.
00:54.258: INFO:    The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.
00:54.258: INFO:    Waiting for 0 language pack downloads.
00:54.258: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
00:54.273: INFO:    No reboot logic message NrApiStart(0), lParam=0x002a2778 returned 0x00000000.
00:54.492: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
00:54.492: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
00:54.492: INFO:    Installing with the extracted package. C:\Windows\TEMP\IE182A.tmp\IE11-neutral.Extracted.cab
00:54.492: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE182A.tmp\IE11-neutral.Extracted.cab /quiet /norestart
01:21.792: INFO:    Process exit code 0x00000002 (2) [The system cannot find the file specified. ]
01:21.792: ERROR:   Neutral package installation failed (exit code = 0x00000002 (2)).
01:21.792: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
01:21.792: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
01:21.807: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
01:21.807: INFO:    Waiting for Active Setup to complete.
01:21.807: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:26.815: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:31.823: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:37.298: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:42.306: INFO:    Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})
01:47.314: INFO:    Waiting for Active Setup to complete. ({A509B1A7-37EF-4b3f-8CFC-4F3A74704073})

PS C:\Windows> DIR -FILTER vbscript.DLL -RECURSE -NAME | get-item | select -expandproperty VersionInfo | sort-object FileVersion, FileName | ft File
Version, FileName -Autosize
FileVersion FileName
5.8.7601.16978 C:\Windows\System32\vbscript.dll
5.8.7601.16978 C:\Windows\SysWOW64\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.16385_none_a44ef4f6479809f0\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7601.17514_none_a68008be44868d8a\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16450_none_bcd6d18300a40070\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16455_none_bcdbd2f5009f7f23\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16476_none_bcc7336700aed05c\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16526_none_bcfd44e9008641ce\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20562_none_bd579ef619c7eed9\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20586_none_bd46004619d48c17\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20637_none_bd7d121219ab16e0\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.16385_none_aea39f487bf8cbeb\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7601.17514_none_b0d4b31078e74f85\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16450_none_c72b7bd53504c26b\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16455_none_c7307d473500411e\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16476_none_c71bddb9350f9257\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.16526_none_c751ef3b34e703c9\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20562_none_c7ac49484e28b0d4\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20586_none_c79aaa984e354e12\vbscript.dll
5.8.7601.16978 C:\Windows\winsxs\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_9.4.8112.20637_none_c7d1bc644e0bd8db\vbscript.dll
PS C:\Windows> get-item -path ".\SysWOW64\vbscript.dll" | fl *
PSPath : Microsoft.PowerShell.Core\FileSystem::C:\Windows\SysWOW64\vbscript.dll
PSParentPath : Microsoft.PowerShell.Core\FileSystem::C:\Windows\SysWOW64
PSChildName : vbscript.dll
PSDrive : C
PSProvider : Microsoft.PowerShell.Core\FileSystem
PSIsContainer : False
VersionInfo : File: C:\Windows\SysWOW64\vbscript.dll
InternalName: vbscript.dll
OriginalFilename: vbscript.dll.mui
FileVersion: 5.8.7601.16978
FileDescription: Microsoft r VBScript
Product: Microsoft r VBScript
ProductVersion: 5.8.7601.16978
Debug: False
Patched: False
PreRelease: False
PrivateBuild: False
SpecialBuild: False
Language: English (United States)
BaseName : vbscript
Mode : -a---
Name : vbscript.dll
Length : 420864
DirectoryName : C:\Windows\SysWOW64
Directory : C:\Windows\SysWOW64
IsReadOnly : False
Exists : True
FullName : C:\Windows\SysWOW64\vbscript.dll
Extension : .dll
CreationTime : 1/15/2014 2:37:08 PM
CreationTimeUtc : 1/15/2014 7:37:08 PM
LastAccessTime : 1/15/2014 2:37:08 PM
LastAccessTimeUtc : 1/15/2014 7:37:08 PM
LastWriteTime : 11/14/2013 5:38:16 PM
LastWriteTimeUtc : 11/14/2013 10:38:16 PM
Attributes : Archive

Expired certificate error for language packages

I wish to inform the nokia authority,that the language package(UK english Martin) provided for Message Reader app (symbian belle) is showing 'CERTIFICATE EXPIRED' error ,whenever I tried to install the language pack.
I request the authority to kindly extend the certificate period more so that all user can use those packages.
I downloaded the language pack from:
http://www.nokia.com/global/support/text-to-speech/
Handset model : NOKIA 701

Same problem with US english language packs, expired certificate despite the fact that I just downloaded it from Nokia a few days ago. So please Nokia renew the certificate for the Nokia super 701 Text To Speech Language packs.
Handset Model: Nokia super 701 FP2

Hi, I am getting an error message while installing iTunes store app on my windows 7 laptop stating 'There is a problem with this windoes installer package. A program required for this install to complete could not be run. Contact your package vendor'

Plz assist

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

SAP GUI slow down after installed Eastern Asian Language Package

Hello,
Have any idea what happened to SAP GUI after installed Eastern Asian Language Package on Windows XP ?
I am working on smartforms translations in SE63 and during entering the japanese or chinese text my working area is slowing down(problems with scrolling), like missing memory or sth?
How to overcome it?
Regards,
Mateusz.

There is a known performance problem with certain SAPGUI patches in certain constellations:
Note 1460669 - Performance problems in SAP GUI for Windows
You may try to install the newest patches or downgrade to a patch that does not have that problem.
Markus

Error occured when installing v1.02 OPN packages

I am running the 64x-based version of Windows 8.1 Enterprise and the most recent 64-bit version of Message Analyzer I could find (build 4.0.6396.0). When I try to install any v 1.02 OPN packages (Exchange ActiveSync, Office and SharePoint, or Exchange Web
Services), I get the following error:
You must install a version of Message Analyzer between 4.0.6866.0 and 4.0.6866.0 to install this package.
I've not found such a version available for download.

That version is only available on connect.microsoft.com. You can create an account and then find our program in the director and sign up there. Then you'll have access to this interim build.
Paul

Cant install new language package on mobile dictio...

Hi,
im trying to install on my 5800 new language(thai)
i have english,hebrew.bulgarian,
when im install the thai language , the software want to remove other language and i need to choose , but i can remove only the hebrew language.
i want to remove the bulgarian, and there is no option to remove it..
i hope there is a solution for this problem..
there is a way to uninstall all the dictionary software and reinstall it with the language that i want to install ?

Hi there!
Regarding your concern in downloading a language package for your phone 5800 XpressMusic, actually it's possible you just have to open the diction ary application on your phone then once it prompts you Only English Language install, install other language? so press yes and it will direct you to the Nokia Website, but if you don't see it press Options inside the mobile dictionary and then look for Language and then you have there the selection download, same thing you'll be routed to the Nokia Website, just select the Language but make sure that the language is being used in your country because if your phone will not support it, you will not be able to use that language you downloaded.
Hope tis' help!
"If you think this post is helpful, please click on the green button"

Package install error on OEL 4...

OEL 4 Update 6 32-bit on AMD Athlon 64 X2 (Home Desktop PC)
Hi All,
I am installing Oracle Enterprise Linux 4 and when the package installation begins after sometime I got the following error:
There was an error installing <package_name>. This can indicate media failure, lack of disk space, and/or hardware problems. This is a fatal error and your install will be aborted. Please verify your media and try your install again.
Initially, it failed on the ghostscript package. So then I went back and didn't select to install the graphics packages. The second time it was the foomatic package. I'm not sure why it is doing this. I have a brand new system (everything) and I am trying to install it on a brand new 200GB SATA hard drive. I checked my install CD's and they all passed the test. I even checked my memory with memtest86.
Any suggestions would help.
Thanks

New hardware can also be broken. A little less unlikely than old hardware, but still a possibility.
I think your conclusion is a little unlikely, because:
-If your session is busy installing the packages, it means you've done partitioning, at least one partition or logical volume has gotten a filesystem.
-The first package which gets installed is (don't know for sure, I'm doing this from memory) either the "filesystem" package or the "glibc" package. If your hardware is incompatible, it would very likely fail at the first package, not at some package during the install.
That means that -probably- something else is going wrong. To get a solution, you need to know what is going wrong, which is in most cases on one of the screens, or in the installation log file. (I have to redo an installation to find out where the installation logfiles are put, perhaps someone else on this forum knows which logfile is created during installation. Most probably this is in a filesystem which is destined to become /var/log if the system is installed)

Will installing a CS5 trial fix the version cue errors from CS4?

Hi, I was wondering if installing a trial version of CS5 would fix the version cue errors from CS4.
If not, does anyone know a good download of the version cue files? They have all dissappeared from my computer after running the cleanup script and the problem still persists =(

Afterr months of pain and one ephiphany later, i have a simple solution to the issue.
Go into the common files, adobe drive, version cue folder, and drag the files into the recycling bin =)
So theres no need to install cs5 =D
Hope this can help others who still have this issue.

Remove installed language package

Hi all,
I want to remove the imported language package, does anyone have any idea about it ?
Best Regards.
W

Hi,
Why did you wanted to remove the lang pack??
This was not regular practice removing package, k but still
By removing the parameter from instance profile and restarting the server will make the lang not accessible.
To my knowledge you cannot remove the lang permanently frm system since this was special pack imported into system not a sort of plugin attached to system.
Regards.......

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Error: Can't install CS6 PS , Exit Code:6, Error: DW050

Hey i'm running an mac(intel) with OS x 10.7 Lion on it.
Everytime I tryed to install CS 6 Photoshop the installer froze.
I cleaned my mac with the cs cleaner tool and tryed to install Photoshop in security mode but following error occurred:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 35 error(s), 0 warning(s)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6: Install failed
ERROR: DW050: - Dynamic Link Media Server: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK CS6: Install failed
ERROR: DW050: - Adobe XMP Panels: Install failed
ERROR: DW050: - Suite Shared Configuration CS6: Install failed
ERROR: DW050: - Adobe Player for Embedding 3.3: Install failed
ERROR: DW050: - AdobeColorJA CS6: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - PDF Settings CS6: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS6: Install failed
ERROR: DW050: - Adobe Utilities CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - AdobeColorEU CS6: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - AdobePDFL CS6: Install failed
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS6: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS6: Install failed
ERROR: DW050: - AdobeTypeSupport CS6: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS6: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Support: Install failed
ERROR: DW050: - Adobe Extension Manager CS6: Install failed
ERROR: DW050: - Adobe Hunspell Linguistics Plugin CS6: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - AdobeColorNA CS6: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB CS6: Install failed
ERROR: DW050: - Photoshop Camera Raw 7: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - DynamiclinkSupport: Install failed
ERROR: DW050: - AdobeCMaps CS6: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS6: Install failed
ERROR: DW050: - Adobe Bridge CS6: Install failed
ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed
Do you have any ideas?

On Windows 7, 64 bit, with the Beta 64 bit version of Photoshop CS6...
I got this error after installation (20th of April):
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
I followed the advice to run the set-up.ex "as admin" - but same problem.
If I load these packages from Microsoft - the installation is interrupted at once with a certificate-error.
This problem (I guess) causes the following error message to promt again and again while I wirte this: "CS6 Servide Manager.exe: The program could not start correctly (0xc000007b), Click Ok to close the program."
Best regards,
Eigil
21st of April:
..and this new error is received, even before CS6 is started on the computer: "CS6 Service Manager.exe: The program cannot be started, as MSVCP100.dll is missing on the computer. Try to reinstall to solve the problem."
(have tried to reinstall - same problem).
These problems are severe, as they are interrupting all tests and (even the writing in this forum, i.e. the message returns each 10th-30th second demanding an OK to be cleared).

AIM2-CUE Error Language package install

Similar Messages

Maybe you are looking for