Aiport is connected but won't let me online
We decided yesterday to move some furniture and when we went to plug the internet stuff back in, it all of a sudden didn't work after working fine all morning. We were very careful so no, nothing was dropped or bumped or anything like that.
I can connect to the internet when I have my MackBook directly connected to the modem via ethernet but I can't wirelessly connect to the internet with my Airport. I can wirelessly print through my Airport and that's about it. It says that it's connected and when I run the diagnostic test through the Network System Preferences, it says I'm connected and everything is working. I even have an IP address.
I've reset and reset and reset. I've talked to Comcast 5 times. They say it's the Airport but I don't understand how if it was working fine earlier in the day and all we did was unplug it and plug it back in. We did just downgrade our internet (because Comcast is so expensive) and it might have taken them a few days to do the change, so could that be the problem? Does the AirPort have to have a certain speed internet to work? Comcast told us that might be the problem... so I'm trying to find out what speed we need for it to work and on top of that, if that could be the problem at all.
Hello SallieLou. Welcome to the Apple Discussions!
Just to be sure, let's double-check your AirPort Extreme Base Station's (AEBS) connection with the modem.
Modem > (Ethernet cable) > \[WAN port "circle-of-dots"] AEBS >>> (wireless) >>> wireless client(s)
Does this match your setup? If so, then I suggest that you perform a complete power recycle of your network components in the following order:
Power Down
o Computer(s)
o AEBS
o Modem
Power Up
o Modem; wait 15 minutes.
o AEBS; wait 10 minutes.
o Computer(s)
Similar Messages
-
Airport Card finds network and says connected but won't let me on internet!
My airport is on and finds a network, shows full strength of signal (like it's done for the past 8 months). But it has stopped letting me onto the internet. Safari and Mail hang and say they are not connected. If I go ahead and plug the ethernet cable in (from same network) it starts up fine. I live in a hotel and have done the same thing for 8 months, why today would it start doing this? Can anyone help. This is my first mac and I haven't the foggiest how to deal with this. I've turned airport off, restarted, turned it back on etc. It always finds a signal and says it's ready, but won't let me onto the internet. Thanks for any help you have.
Is the internet service also password protected? (As in, do you need a password for both the wireless and for the internet connection?) If so, then when you run the "assist me" option you should set up a PPP connection. That's my situation but I still have problems with it remembering my settings after rebooting or disconnecting...
-
Have wifi connection but won't let me connect to itunes or do anything else
Have a wi fi connection but can not do anything and when I try app store it says cannot connect to itunes store
Can't connect to the iTunes Store
-
Satellite A500 WLan connecting but won't let me get access to net
As title suggest. i just bought the laptop and wont let me connect to the net.
Disabled all the firewall settings. I'm lost.
Got it connected throught network cable atm and using netHi
In your case I would check the router and WLan configuration again.
I mean you could try to disable the encryption in WLan router and could try to connect to open wireless lan.
You should update the WLan driver too:
http://aps2.toshiba-tro.de/wlan/ -
Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!
Place the iPOo in recovery mode for the passcode issue. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Anyone having trouble with iCloud? It first started on my iPhone5; it's not connecting to iCloud. Tells me I need to reset my password, but won't let me reset my password
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
My new iPhone 5 will connect to iTunes, but won't let me put music or pictures onto it...
My new iPhone 5 shows up in iTunes, but won't let me put pictures or music onto my phone. They are both under the same iTunes account and it let me transfer stuff onto my old iPhone 4 before. I don't know why it won't let me now. Both are updated also... Please help!!
Thank you so much! I can't believe I didn't think to check that. I synced it to iTunes, but I didn't think to see if those were checked or not and they weren't. I checked them, and resynced and its working perfectly. Thanks so much!!!
-
I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
UnixODBC connects, but won't select - 64bit Linux and client 10.2.0.1.0
ODBC connects, but won't select - 64bit Linux and 64 bit Oracle instant client 10.2.0.1.0, full install (all files but basiclite).
ODBC can connect to an Oracle database, but cannot describe or select.
sqlplus can connect and select.
Also, ODBC can connect and select using a mysql database.
At end is ODBC trace log, odbcinst.ini and odbc.ini
Using the isql utility from unixODBC version 2.2.10, I get the following
## working tnsnames.ora is located
$ export TNS_ADMIN=/usr/share/oracle/OraHome_1/network/admin
$ LD_LIBRARY_PATH=/usr/lib64/oracle isql -v TESTDB foo bar
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> describe dual
[IM003][unixODBC][Driver Manager]Specified driver could not be loaded
[ISQL]ERROR: Could not SQLAllocStmt
SQL> select count(*) from dual;
[IM003][unixODBC][Driver Manager]Specified driver could not be loaded
[ISQL]ERROR: Could not SQLAllocStmt
SQL>
Trace appended at end.
System Details
SuSE 9.3 64 bit, 2x Xeon, 8Gb RAM, latest SuSE kernel 2.6.11.4-21.9-smp
A 64bit full client(10.1.0.3.0) is installed in /usr/share/oracle/OraHome_1, where the tnsnames.ora file is located (in network/admin)
The 64 bit instant client is installed in /usr/lib64/instantclient_10_2, pointed to by soft-link /usr/lib64/oracle
I also have a 32bit instant client, which is needed by OpenOffice
From a shell with unset ORACLE_HOME, and with no Oracle lib in the ld.config path, all 3 versions are able to connect, and describe dual and select (*) from dual;
export TNS_ADMIN=/usr/share/oracle/OraHome_1/network/admin
# 10.2 64 bit instant client
LD_LIBRARY_PATH=/usr/lib64/oracle /usr/lib64/oracle/sqlplus foo/bar@TESTDB
# 10.2 32 bit instant client
LD_LIBRARY_PATH=/usr/lib/oracle /usr/lib/oracle/sqlplus foo/bar@TESTDB
# 10.1 64 bit full client
LD_LIBRARY_PATH=/usr/share/oracle/OraHome_1/lib /usr/share/oracle/OraHome_1/bin/sqlplus foo/bar@TESTDB
#### LOG AND INI FILES
### odbcinst.ini
[OracleODBC-10g]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib64/oracle/libsqora.so.10.1
Setup = /usr/lib64/unixODBC/liboraodbcS.so.1
FileUsage =
CPTimeout =
CPReuse =
[ODBC]
Trace = Yes
TraceFile = /tmp/sql.log
ForceTrace = No
Pooling = No
### odbc.ini
[TESTDB]
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
CloseCursor = F
DisableDPM = F
DisableMTS = T
Driver = OracleODBC-10g
DSN = TESTDB
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
ServerName = TESTDB
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
Here is the output from ODBC's trace of the isql session
[ODBC][27847][__handles.c][444]
Exit:[SQL_SUCCESS]
Environment = 0x507700
[ODBC][27847][SQLAllocHandle.c][346]
Entry:
Handle Type = 2
Input Handle = 0x507700
[ODBC][27847][SQLAllocHandle.c][464]
Exit:[SQL_SUCCESS]
Output Handle = 0x507ce0
[ODBC][27847][SQLConnect.c][3527]
Entry:
Connection = 0x507ce0
Server Name = [TESTDB][length = 6 (SQL_NTS)]
User Name = [foo][length = 3 (SQL_NTS)]
Authentication = [bar][length = 3 (SQL_NTS)]
UNICODE Using encoding ASCII 'ISO8859-1' and UNICODE 'UCS-2LE'
[ODBC][27847][SQLConnect.c][4101]
Exit:[SQL_SUCCESS]
[ODBC][27847][SQLAllocHandle.c][511]
Entry:
Handle Type = 3
Input Handle = 0x507ce0
[ODBC][27847][SQLAllocHandle.c][641]Error: IM003
[ODBC][27847][SQLError.c][424]
Entry:
Connection = 0x507ce0
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][461]
Exit:[SQL_SUCCESS]
SQLState = IM003
Native = 0x7fffffffd748 -> 0
Message Text = [[unixODBC][Driver Manager]Specified driver could not be loaded]
[ODBC][27847][SQLError.c][424]
Entry:
Connection = 0x507ce0
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][461]
Exit:[SQL_NO_DATA]
[ODBC][27847][SQLError.c][504]
Entry:
Environment = 0x507700
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][541]
Exit:[SQL_NO_DATA]
[ODBC][27847][SQLAllocHandle.c][511]
Entry:
Handle Type = 3
Input Handle = 0x507ce0
[ODBC][27847][SQLAllocHandle.c][641]Error: IM003
[ODBC][27847][SQLError.c][424]
Entry:
Connection = 0x507ce0
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][461]
Exit:[SQL_SUCCESS]
SQLState = IM003
Native = 0x7fffffffd748 -> 0
Message Text = [[unixODBC][Driver Manager]Specified driver could not be loaded]
[ODBC][27847][SQLError.c][424]
Entry:
Connection = 0x507ce0
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][461]
Exit:[SQL_NO_DATA]
[ODBC][27847][SQLError.c][504]
Entry:
Environment = 0x507700
SQLState = 0x7fffffffd750
Native = 0x7fffffffd748
Message Text = 0x7fffffffd760
Buffer Length = 500
Text Len Ptr = 0x7fffffffd74e
[ODBC][27847][SQLError.c][541]
Exit:[SQL_NO_DATA]We are having similar issue. Could you please let me know how to resolve this issue. If using 32-bit driver is the only solution, please provide the URL to download this.
Linux gahfndev02 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 22 16:56:41 2007 -
My Icloud Backup is on but won't let me 'Back Up Now'. Any ideas?
My Icloud Backup is on but won't let me 'Back Up Now'. Any ideas?
Go into your bluetooth settings and under system preferences and make sure it is still paired and connected. If not the add it,
-
TS4268 My iPad accepts my password but won't let me on iMessages or FaceTime help
My iPad accepts my password but won't let me on I mess or FaceTime
Texas Mac Man, we seem to have the same hardware and ios. Maybe you can help direct me to a solution for a similar problem. I tried everything as best i could on the relevant support page, but I'm still stumped.
Problem: when attempting to sign in to either Facetime or Messages, this alert appears: "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
Device affected: iPad2
Device NOT affected iPhone5C
I have not tried turning off Airplane mode, out of fear that it might lock in on my mobile carrier and may charge me for data use from the iPad... I upgraded to the iPhone plan and eliminated the iPad data only plaN, keeping it on airplane mode ever since.
Details
1. The problem started after downloading and installing the latest iOS 8.1 for iPad.
2. I used this internet connection to download the iOS 8.1 update, and am now on Safari connected to the internet through this device to find out why Facetime won't work.
3. The wifi settings allowed the previous iOS to send/receive iMessages... And are sufficient to currently watch Netflix movies on this device... Given that iDevices don't change network settings from common use, and my iPhone can send iMessages while in airplane mode and on wifi, the settings must be correct.
4. I've successfully signed into my iTunes account on both my laptop and this device using the correct Apple email ID and password. I've successfully logged onto my Apple ID from the Apple website to confirm emails and IDs are verified, through Safari on this device.
5. My Apple ID is my current valid/alternate email address. I've signed into iCloud on both laptop and iPad using this password. I've emailed myself to and from my Apple ID email using this device. I've also tried signing into Facetime using my alternate Apple ID.
6. Time zone is correctly auto set to my nearest time zone town. When set manually, the problem is still present.
7. Cellular data connection is not subscribed for this device. This device with previous iOS has been able to use Messages through this wifi connection as it is currently configured. Attempts from various wifi/coffee spots to sign in using Apple ID and all possible alternates do not resolve the problem.
8. Even though this suggestion was not listed under this specific error message, I decided to try "waiting 24 hours" and the same error still results. It isn't clear if waiting means specifically not attempting to log in to iMessages.
I'll try waiting more and see where that gets me.
Thanks -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
Can anyone advise me on what I need to do?
My existing account is linked to ireland as my bank account details are there, does this make a difference?
Please help!Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.
-
Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?
You must be signed into the Apple Store with your Apple ID or it won't work.
and
How to deal with a 100 Store Error:
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here;
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences/
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store. -
I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?
If the OS X 10.2 on the hard drive is/was bootable, try this -
Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.
Maybe you are looking for
-
HP Laserjet 4 drivers for Windows 7
Tried plug and play and no luck. Tried downloading the driver from Windows 7 and it wouldn't work and seemed to cause problem with the operation of the computer so I removed the driver. Tried the HP auto detection and it's not seeing it. HP suppor
-
Movie Won't Download - No Error Message - Just Starts Telling Me It'll Be 1000s of Hours
I actually have this same issue from my iPhone. I didn't know until tonight. After several fruitless emails to Apple support, I removed all my pictures and videos on my iPhone to make room for the movie I bought and after downloading 4.8mb the issue
-
Am purchase iphone4 in UAE, but not work in india ,why?
am purchase iphone 4 in UAE, but it is not working in india why?
-
I'm having troubles extracting form tags and their attributes from a html... Wich class should I use for this job?? There is a html parser in JavaSE, right?
-
Vista Business not showing as valid OS for ordering Windows 7
Around July 6 there was at least one thread that mentioned when trying to order windows 7 upgrade for Pavilion Elite e9150t (product NY810AV) with Vista Business factory installed, the only current operating system in the dropdown is Vista Home Premi