Air 3.6 not available in publish settings after install - Flash CS6

After installing Air 3.6 beta, Flash CS6 does not have Air 3.6 available in the publish settings - target. Highest available target is Air 3.4.
System: Mac Book Pro-Retina, OS - X Lion.

This is a mystery to me. On my Mac, I have Flash CS6 installed, and it told me at install time it was installing AIR3.5 at the same time. However, in the Flash Publish options, I only have AIR3.2 available?????
I installed AIR 3.6 Beta, and it told me it was upgrading AIR3.5 to 3.6 huh ???? but still not available anywhere I can find it. I can't find it anywhere, and still only have AIR3.2 in the \Applications\Adobe Flash\CS6 directory, and in Publish settings.

Similar Messages

  • "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
    Is there a way to tell Safari what encoding to use if the web page fails to do that?

  • HT4623 Software update is not available in the settings general

    Software update is not available in the settings>general

    That is only a feature of iOS 5 or later...
    If you have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Drafts Not Available for Publish

    Using Contribute CS3 and CPS. Draft is sent for review. It is
    reviewed by the admin. Admin goes to "publish" and Contribute says
    that the Draft is not available to publish. The person who created
    the draft - his PC was on. Any ideas on why this happens?

    Unless Verizon surprises us with some special promotions this year, the only way to get the iPhone 4 before you're eligible for an upgrade is to pay full retail. That would be $599 for the 16GB model and $699 for 32GB. If you wait until September, it'll be $199 or $299 with a two-year contract.

  • Iphone contacts "not available" to car phonebook after messing around with Outlook.pst file names and backups. Iphone4 connects to car though and other phones connect properly.

    iphone contacts "not available" to car phonebook after messing around with Outlook.pst files, names and backups, on my ms XP 2003 laptop. I substituted a much smaller new Personal Folder -Contacts File, with a smaller list of phone numbers (4 only as a test) which successfully synced to the iPhone 4. The iPhone connects to the Skoda Octavia HandsFreeSystem OK (Bluetooth works fine), but now iPhone wont load the new Contacts as it did originally. However a family Nokia (never messed with) can connect properly. So must be the iPhone or more likely an Outlook.pst \ Contacts problem. Ideas?

    After fiddling a little more, the following fixed my corrupted outlook.pst file:
    1) I made a backup
    2) In outlook under file, I exported the calendar to excel
    3) In outlook under file, I imported the calendar back to outlook
    And voila, it worked.

  • I can not activate my iphone 4 after installing the firmware ios 7, can not remember the password apple id, a check box is all

    I can not activate my iphone 4 after installing the firmware ios 7, can not remember the password apple id, a check box are all available, please look into this matter
    serial number TP113FG5A4S, imei 012657000548662

    Copied from my initial post:
    Then you'll NEVER be able to re-activate the phone. This is called Activation Lock & there is no way around it if you don't know that info.
    You can try & recover the ID here:
    https://iforgot.apple.com/appleid

  • HP 5510 wil not print in black ink after installing a new black ink cartridge

    My HP 5510 printer will not print in black ink after installing an official HP black ink cartridge.  I see other people have had the same problem.  I have gone through all the troubleshooting suggestions.  
    I would like to know if anyone has been able to fix this problem.  I just spend money on a new XL cartridge.  Any help/suggestions would be appreciated. 

    Hi @obxgirl,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • HT1923 my iphone4s is not connected to my computer after installing itunes...

    my iphone4s is not connected to my computer after installing itunes... if i uninstall itunes and connect my phone then computer is detecting my phone.... how to solve this plz help me....

    itunes is creating the problem... if i connect my iphone to itunes it is not detected.... after uninstalling itunes, iphone connects with computer.... u get me?

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

  • My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard, what can i do?

    My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard (iTunes does not recognize the iPhone anymore) , what can i do?

    Try removing and reinstalling AMDS:
    http://support.apple.com/kb/HT1747
    (I requested deletion of your duplicate post.)

  • MBP will not shut off or restart after installing lion.

    MBP will not shut off or restart after installing lion. I tried installing the latest update but since it will not restart the update will not work.

    Everything works except it will not shut down or restart so I can't update it.
    I run the Adobe master creative suite collection, Microsoft office and countless other software products without a hitch.
    After I click on update software then download the apple update for lion it says I have to restart the computer to finnish the install.

  • When a contact tries to call me on FaceTime, they are told I'm not available. In settings, it's turned on and I can call them with no problem immediately after they've tried calling me. Any ideas?

    Facetime tells my contacts I'm not available. My FaceTime is turned on in settings and  I'm able to FaceTime them immediately after they've tried calling me. Any ideas what I'm missing? 

    Try going to settings and turning FaceTime off, then back on again.  A hard reset may also help(hold down the power button and the home button together until you see the Apple logo)

  • SharedObject not working with 'Debuggin Permitted' NOT checked in publish settings

    Hello,
    I have run into a strange problem writing out SharedObject
    data. If I select(check) Debugging permitted in the publish
    settings the data is written correclty. If I uncheck the option,
    the data is not written. The flush() call returns true in both
    cases.
    Could this be a security related issue?
    Thanks,
    Brad

    Hey florsignol,
    I understand that your monitor, while appearing in System Preferences, doesn't display anything; however, it works fine in BootCamp. These are the applicable troubleshooting steps I would go through to resolve the issue:
    1. Reset the System
    You can reset the Mac's parameter RAM and SMC.
    2. Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    from: Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    All the best,
    Delgadoh

Maybe you are looking for

  • I have a problem with a family members blackberry curve 8520!

    My grandmother has a problem with the blackberry as she cannot call or receive calls from people on her contacts list or anyone else. She said to me that she has a star in a blue box under her signal bar and next to it she has a "gprs". Could this be

  • SAP Servers not showing up in Server Explorer...

    Hi, I have just installed v2 of NCO and everything has installed fine. Also tested a previous application written for v1 NCO and works fine. But for some reason or other I can no longer create a sapproxy with V2. I followed the tutorial in VS2003 to

  • Can't Import netscape.javascript; classpath set properly

    I have an applet that is trying to say import netscape.javascript.*No matter how I try to compile it, I get the error package netscape.javascript does not existI am primarily using ant for building; here is the pertinent section of my build.xml file:

  • Iphone 4s do not turn on after unboxing

    i bght an iphone 4s 16GB today and it do not turn on after unboxing. No sign of charging or anything. The screen is just blank. please help

  • Curve 8530 wont scroll in certain menu's

    Hey everyone, My blackberry curve wont scroll in any direction on the blackberry home menu without holding in the shift key. Also when I hold the lock key ( the * key) it goes right into standby mode and I have to use the mute key to get it out of st