AIR 3.9.0.790 - Problem with debug configurations

Hi there
After updating from 3.9.0.720 to 3.9.0.790 it seems that my debugging configurations are ignored (works fine with build 720). When running the app on AIR Simulator I always end up with a 500 x 375px screen with a high resolution display simulated.
- Flash Builder 4.7
- AIR 3.9.0.790
- Starling-Project for iOS only
- Debug-Configuration: various iOS devices (Mobile Application)
Am I missing something?! Any hints?
Regards,
René

We're having the same problem. In our project, the only difference is switching between AIR 3.6 and 3.9.0.1030 (obviously a wider range than the above), and the 3.9 ADL simulator ignores the -screensize argument and forces the window to 500x375. Oddly, this affects only one Mac out of three.
Perhaps interestingly, the affected Mac is OSX 10.8.4 (server edition), while the ones that work are 10.8.2

Similar Messages

Problem with debug XT75

Hello
I have problem with debug program for XT75. I work in XP , install java j2sdk1.4.2_09 (from CD) , eclipse (with EclipseMEplugin_123) ,SMTK and connect terminal TC65 with XT75 module.
When I want to debug my simple Midlet HelloWorld under celipse I get error:
=========================================================================
 Starting XT75 emulator for debugging application. Please wait ...
 =========================================================================
 COM port used for "emulator session": COM1
 Used baud rate for the module "115200 baud"..
 >>> Emulator is set to no download of Jar and Jad file! <<<
 Initialize module for debugging ...
 The module is now initialized for debugging!
 >>> Establishing TCP/IP connection "IP connection for remote debugging"... <<<
 Please wait ...
 Done.
 >>> Starting Debug Agent ... <<<
 The debug agent is not started!
File WM_Debug_config.ini in WTK for XT75 is:
# This ini file is used to configure emulator.exe
# Hints:
# Store this ini file into the directory where the emulator.exe is located!
[Module type]
# Define the used module type
ModuleType=XT75
[AT command]
# These AT commands are used for initialising the module for debugging!
# Hints:
# The IP address range 10.x.x.x is not supported for configuration of debugging!
AT-Cmd1=S:ATE1
AT-Cmd2=R:OK
AT-Cmd3=S:at+cpin?
AT-Cmd4=R:+CPIN: READY
AT-Cmd5=R:OK
AT-Cmd6=S:at^scfg=userware/debuginterface,"192.168.0.21","192.168.0.22","0"
AT-CMd7=R:^SCFG: "Userware/DebugInterface","192.168.0.21","192.168.0.22","0"
AT-Cmd8=R:OK
AT-Cmd9=S:at^scfg=userware/mode,"debug","a:/","2000"
AT-Cmd10=R:^SCFG: "Userware/Mode","debug","a:/","2000"
AT-Cmd11=R:OK
AT-Cmd12=S:at^scfg=userware/stdout,UDP,2000
AT-Cmd13=R:^SCFG: "Userware/Stdout","UDP","2000"
AT-Cmd14=R:OK
[System.out port]
# used UDP port number range: 1024 ... 65535
# comment out the following line for switching off Java "System.out" displaying in the IDE window
#UDPport=12345
[DebugAgent delay timer]
# settings for Debug Agent delay timer in ms
#DATimer=2000
I send At command to terminal AT^SCFG? and get answer:
^SCFG: "AutoExec","0","0","0","0",""
^SCFG: "AutoExec","0","1","0","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","1","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","2","0","","000:00:00","000:00:00"
^SCFG: "GPRS/ATS0/withAttach","on"
^SCFG: "GPRS/AutoAttach","disabled"
^SCFG: "GPRS/PersistentContexts","0"
^SCFG: "GPRS/RingOnIncomingData","off"
^SCFG: "MEopMode/Airplane","off"
^SCFG: "MEopMode/Airplane/OnStart","off"
^SCFG: "MEShutdown/OnIgnition","off"
^SCFG: "PowerSaver/Mode9/Timeout","20"
^SCFG: "Radio/Band","3","15"
^SCFG: "Radio/OutputPowerReduction","3"
^SCFG: "Serial/USB/DDD","0","0","0409","0681","0034","Siemens AG Wireless Modules","XT75",""
^SCFG: "Tcp/BufSize","5200"
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/SAck","1"
^SCFG: "Tcp/TTcp","0"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/OTAP","0"
^SCFG: "Userware/Autostart","0"
^SCFG: "Userware/Autostart/AppName",""
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","192.168.0.21","192.168.0.22","0"
^SCFG: "Userware/Passwd"
^SCFG: "Userware/Mode","debug","a:/Project02.jar","2000"
^SCFG: "Userware/Stdout","UDP","2000"
^SCFG: "URC/CallStatus/CIEV","restricted"
^SCFG: "URC/CallStatus/SLCC","verbose"
^SCFG: "URC/Datamode/Ringline","off"
^SCFG: "URC/Ringline","local"
^SCFG: "URC/Ringline/ActiveTime","2"
OK
Please help me.
Thanks.

Hello,
I would like to know if you could debug?
That's the same problem what I have.
At the moment I have the DSB75 and the XT75 module I don't know what else I can to to run the program under debug.
OS: Win XP
eclipse-SDK-3.3.1.1
eclipseme.feature_1.7.7
Regards,
NOVI

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem With Cutom Configuration with Object Type

Dear Guru's
I am working WebUI, I am facing a problem with Custom Configuration.
1. The initial requirement to control the visibility for a dropdown event in ERP Quotation.
2. To this i copied the default configuration to custom configuration with custom Object type and Subtype.
       CONFIG KEY: ZPJQTN
       OBJECT TYPE: ZOTYP_CONFIG
       OBJECT SUB TYPE: ZSTYPE_CONFIG1
3. I have created customm fields in enhancement.
4. Now i chosen my new configuration (ZPJQTN,ZOTYP_CONFIG,ZSTYP_CONFIG1), when i click Show available fields, the custom fields are not showing. Instead the created fields are available at other configuration.
5. I am able to control the visibility for the standard available fields.But i am not getting the custom created fields
(Note: I have created the Object type and Object sub type as follows: SPRO->CRM->UI Framework->Define Object Types
Object type: ZOTYP_CONFIG Callback class: ZCL_CONFIG_CALLBACK
Redifned the method: IF_BSP_DLC_OBJ_TYPE_CALLBACK~GET_OBJECT_SUB_TYPES
Coded as below:
data: lv_subtype type bsp_dlc_object_sub_type.
lv_subtype = 'ZSTYP_CONFIG1'.
append lv_subtype to result.
lv_subtype = 'ZSTYP_CONFIG2'.
APPEND lv_subtype to result.
Now Please suggest me how to achieve this.
Also please let me know, whether i am following the correct procedure for controlling the visibility.
Thanks in Advance,
S.Meganadhan.

Hi Harshit,
I added custom fields using AET only.
I am able to see the field got added in the structure. I am able to access GET and SET methods of the field.
But the problem is, it is not getting saved. Am i missed any configuration step?
Please suggest me.
Thanks in advance,
Regards,
S.Meganadhan.

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

ITunes has detected a problem with your configuration

I recently tried to use my iTune player and when I click the shortcut to open it, the following error message appears: "iTunes has detected a problem with your configuration. Audio/Video playback may not operate properly." The program shows up on my desktop, but when I select something to play, nothing happens.
I use Windows 7. It did work previously, and I do not know of any specific change made to my computer that could have caused this. I am not sure when it developed since I have not tried to use iTunes for a week or more. I checked the community forum and there were similar problems 7 years ago, but could not find any solution (One link to a solution is not longer good.)

Hello LouisvillePS
Start with the troubleshooting in the article below to resolve issues with start. You can use Safe Mode to start up to see if it still pops up as well as testing in a new user on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/dl1614
Regards,
-Norm G.

Problem with debug EP6

Hi all,
I debug an EP6 application with the Developer Studio. This work fine but when the debug starting, it automatically switch in the EP perspective and not in debug perspective?! Each time! Any idea ?
Best regards.

Hi,
I had this problem until recently myself.
You can stop the behaviour by the following steps:
Open the debug configuration screen>in the right hand navigation menu select the application you are debugging beneath the item 'Remote Application'>Click the 'Common' Tab in the left hand window. There you will find the option 'Perspective to switch to or open when launched'
Change this setting to default and the problem is resolved.
Please assign points if this resolves the problem or is helpful and let me know if require further detail.
Kind Regards
Daniel

Problem with debug servlet Eclipse 3 tomcat 5

I have configured Eclipse 3 with Tomcat 5.0.28 and tomcatPulginV3
but, I have problem to debug my servlet
I have error message
help me it is urgent
Failed to connect to remote VM. Connection refused.
java.net.ConnectException: Connection refused: connect
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(Unknown Source)
java.net.PlainSocketImpl.connectToAddress(Unknown Source)
java.net.PlainSocketImpl.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
java.net.Socket.<init>(Unknown Source)
java.net.Socket.<init>(Unknown Source)
org.eclipse.jdi.internal.connect.SocketTransportImpl.attach(SocketTransportImpl.java:47)
org.eclipse.jdi.internal.connect.SocketAttachingConnectorImpl.attach(SocketAttachingConnectorImpl.java:103)
org.eclipse.jdt.internal.launching.SocketAttachConnector.connect(SocketAttachConnector.java:131)
org.eclipse.jdt.internal.launching.JavaRemoteApplicationLaunchConfigurationDelegate.launch(JavaRemoteApplicationLaunchConfigurationDelegate.java:75)
org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:569)
org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:788)
org.eclipse.debug.internal.ui.DebugUIPlugin$6.run(DebugUIPlugin.java:955)
org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)Thanks

Check your packages which you are importing....

Problems with Debugging

Hi!
I' m facing a problem when trying to create a new debug-configuration: The NWDS tells me "No tab group defined for configuration type com.sap.ide.webdynpro.projectbrowser.launch.configtype.debug". The same message occurs with - except J2EE-developments - all other project types.
Has anybody got an idea what the problem could be?
Regards,
Thomas
PS: The Error Log-View of PDE Perspective doesn' t say a word about it.

Hi,
I think SapIdeWebdynproProjectBrowser.jar missing in your Eclipse plugins.
Please check it once.if not this jar import this once again.
C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.ide.webdynpro.projectbrowser
This might helps.
Thanks,
Lohi

Problem with Debug mode and SLD

Using the config tool, we have turned the Debuggable flag to 'yes' and set the Debug mode to OFF. Now from the studio, when I enable debugging for the process, the server0 stops successfully and restarts successfully. However, during the restart, the SLD service errors out and does not get started. It encounters the following exception. I can verify the error in std_server0.out
With erred SLD service, when I try to deploy and run the webdynpro application from studio, the deploy fails with the same exception.
We tried all kinds of restart (of the engine\server instance), debuggable and debug mode setting permutations, but not successfull. (debug port is 50021)
We are having remote debug server setup (not local).
Does anybody have any suggestions???
The exception we get is:
Finished with warnings: development component 'CreateOrder'/'local'/'LOKAL'/'0.2007.11.26.14.33.54':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application local/CreateOrder and wait. Reason: Clusterwide execption: server ID 3775750:<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)

Hi Michael,
one way is to enhance the server go.bat with debug parameters. Under c:\usr\sap\<SID>\j2ee\<INSTANCE>\cluster\server\go.bat define the following params
set DEBUG_PORT=5000
set DEBUG_PARAMS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=
and add both params to the java arguments (e.g. behind the -classpath): %DEBUG_PARAMS%%DEBUG_PORT%.
Regards,
Stefan

I have a MacBook air. I'm having problems with my cursor either I cannot see it or disappears is there anything I can do to fix it

I'm having a problem with my cursor. It either disappears or I cannot see it immediately. Is there a way to make an adjustment on the display of the curse

reset SMC , also uncheck and check each setting on the cursor
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Problems With System Configuration

System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
Are there any solutions?
Office diagnostics produced the following report.
Diagnostic Results
None of the Microsoft Office Diagnostics found any problems.
More resources
Setup Diagnostic — File corruption or altered file
The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
of the 2007 Office release.
More resources
Setup Diagnostic — Missing media
The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
Your 2007 Office release installation CD
An installation disk or repair CD provided by the vendor of your computer
A connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
More resources
Disk Diagnostic — Failure of hard disk predicted
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
We recommend that you do the following:
1.Back up your important data immediately.
2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Disk Diagnostic — Errors in system event log
The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
This result occurs if one of the following has happened recently:
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Memory Diagnostic — RAM failure
The Memory Diagnostic found evidence of failure in the random access memory (RAM).
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
2.If you continue to get this result, do either of the following:
Run a Microsoft Windows memory diagnostic. For more information, see the following:
Windows Vista How do I know if my computer has a memory problem?
Microsoft Windows XP Windows Memory Diagnostic
Contact someone, such as the vendor of your computer or RAM.
More resources
Memory Diagnostic — User is not an administrator
The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
More resources
Update Diagnostic — Installation is out of date
The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
Update, click Check for Updates.
More resources
Compatibility Diagnostic — Conflicting versions of Outlook found
The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
Microsoft Windows Vista
1.Click the Start button, and then click Control Panel.
2.Click Uninstall a program.
Note In Classic view, double-click Programs and Features.
3.Select the version of Outlook that you do not want, and then click Uninstall.
Microsoft Windows XP
1.Click Start, and then click Control Panel.
2.Double-click Add or Remove Programs.
3.Select the version of Outlook that you do not want, and then click Remove.
More resources

Check disk and memory diagnostics found no errors.
SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
Log Name: Microsoft-Windows-MemoryDiagnostics-Results/Debug
Source: Microsoft-Windows-MemoryDiagnostics-Results
Date: 8/21/2014 12:51:09 PM
Event ID: 2001
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: TAS
Description:
Windows Memory Diagnostic results
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
 <EventID>2001</EventID>
 <Version>0</Version>
 <Level>4</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x4000000000000000</Keywords>
 <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
 <EventRecordID>1</EventRecordID>
 <Correlation />
 <Execution ProcessID="5296" ThreadID="5300" />
 <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
 <Computer>TAS</Computer>
 <Security UserID="S-1-5-18" />
</System>
<UserData>
 <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
 <MemDiagRawData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emDiagRawData>
 </Results>
</UserData>
</Event>
Windows Resource Protection could not start the repair service.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>DISM
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
 {servicing_command} [<servicing_arguments>]
DESCRIPTION:
DISM enumerates, installs, uninstalls, configures, and updates features
and packages in Windows images. The commands that are available depend
on the image being serviced and whether the image is offline or running.
GENERIC IMAGING COMMANDS:
/Get-MountedImageInfo - Displays information about mounted WIM and VHD images.
/Get-ImageInfo - Displays information about images in a WIM or VHD file.
/Commit-Image - Saves changes to a mounted WIM or VHD image.
/Unmount-Image - Unmounts a mounted WIM or VHD image.
/Mount-Image - Mounts an image from a WIM or VHD file.
/Remount-Image - Recovers an orphaned image mount directory.
/Cleanup-Mountpoints - Deletes resources associated with corrupted mounted images.
WIM COMMANDS:
/Capture-CustomImage - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
/Get-WIMBootEntry - Displays WIMBoot configuration entries for the specified disk volume.
/Update-WIMBootEntry - Updates WIMBoot configuration entry for the specified disk volume.
/List-Image - Displays a list of the files and folders in a
 specified image.
/Delete-Image - Deletes the specified volume image from a WIM file
 that has multiple volume images.
/Split-Image - Splits an existing .wim file into multiple
 read-only split WIM (SWM) files.
/Export-Image - Exports a copy of the specified image to another
 file.
/Append-Image - Adds another image to a WIM file.
/Capture-Image - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
/Apply-Image - Applies an image.
/Get-MountedWimInfo - Displays information about mounted WIM images.
/Get-WimInfo - Displays information about images in a WIM file.
/Commit-Wim - Saves changes to a mounted WIM image.
/Unmount-Wim - Unmounts a mounted WIM image.
/Mount-Wim - Mounts an image from a WIM file.
/Remount-Wim - Recovers an orphaned WIM mount directory.
/Cleanup-Wim - Deletes resources associated with mounted WIM images that are corrupted.
IMAGE SPECIFICATIONS:
/Online - Targets the running operating system.
/Image - Specifies the path to the root directory of an offline Windows image.
DISM OPTIONS:
/English - Displays command line output in English.
/Format - Specifies the report output format.
/WinDir - Specifies the path to the Windows directory.
/SysDriveDir - Specifies the path to the system-loader file named BootMgr.
/LogPath - Specifies the logfile path.
/LogLevel - Specifies the output level shown in the log (1-4).
/NoRestart - Suppresses automatic reboots and reboot prompts.
/Quiet - Suppresses all output except for error messages.
/ScratchDir - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an option immediately before /?.
Examples:
 DISM.exe /Mount-Wim /?
 DISM.exe /ScratchDir /?
 DISM.exe /Image:C:\test\offline /?
 DISM.exe /Online /?
C:\WINDOWS\system32>DISM.exe /English
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 1639
No DISM options were specified on the command-line.
Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

Itunes cannot open beacuase it has detected a problem with audio configuration

i have the same poblem my Itunes cannot open beacuase it has detected a problem
with your aduio configuration i saw the answer to that question and i tryed it
but my computer was already to those settings and my Itunes is still not working
i realy need help I am a music addict and i cant organize my playlists i cant
buy new songs i cant do anything please help me.

Follow the steps outlined in this article to fix that:
http://docs.info.apple.com/article.html?artnum=304424
Rachyl

ITunes won't open due to problem with audio configuration

Out of the clear blue iTunes will not open any longer. I get a gray message screen that says iTunes can't open due to
an audio configuration problem. Any answers for this???

iTunes can't open due to an audio configuration problem.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

AIR 3.9.0.790 - Problem with debug configurations

Similar Messages

Maybe you are looking for