AIR 3.9 and iOS7 Build Release .ipa File Cannot Start

I build a release build .ipa file and installed on iPad running on iOS 7.0.3. But weird because my app stuck on start screen with my logo.
Debug .ipa file is running correctly, just problem with the release build .ipa.
I build using Flash Builder 4.7. If I build using IntelliJ IDEA the app icon grayed and cannot be opened.
Any idea what's going on with my build file?

You're right, I didn't realize if there's an error on the top of my debug console:
MATE Error: Method not found, turn on the debugger for more information
EventType:config event. Error was found in a EventHandlers list in file ApplicationEventMap
I'll try to fix this. But on my recent build, the file cannot be installed successfully on iOS7. The icon turned gray and when I press the icon, it will shows "installing" forever.
---UPDATE
No error anymore on debug mode. But still the same problem
And the "installing" forever problem was because I use wrong provisioning key.
Once the application start, it stucks on splash screen just showing my logo. I've wait for a couple mins but nothing happened.

Similar Messages

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

SW2 - Different certificates of Host App and Smart Connect. Host App cannot start.

I got my SmartWatch 2 today and installed Smart Connect and SmartWatch 2 app from google play, got the smartwatch to pairing with my phone manual bluetooth connect.
But in the notification bar i getting " Different certificates of Host App and Smart Connect. Host App cannot start." and i can not go in to settings on Smart Connect for the SW2.
Please help, right now i can not use the smartwatch becouse of no apps....
Solved!
Go to Solution.

That sounds strange. Have you installed both Smart Connect and SmartWatch 2 from Google Play or did you install them from another source? If installed from Google Play, uninstall (updates) SmartWatch 2 and Smart Connect and then install/update them again from Google Play.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I just bought the MacBook Air and tried to transfer my songs from my external hard drive to my mac. now i cannot open iTunes and it said that the file cannot be found or created.

i just bought a macbook air. ive been transfering all my songs from my external harddrive that i had on my previous laptop for itunes. now that i got them transfered. my itunes wont open. it says "the itunes library file cannot be found or created. the default location for this file is in the itunes folder in the music folder." what do i do!?!

How did you move the music? You have to do it in a specific way:
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.

Firefox had a problem and creashed ... I cannot start firefox

Windows Otlook at same time stopped working with the fpllowing message: cannot start Microsoft Outlook. Cannot initialize shared utilities. ........ help

Hey dapaley,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If you can start it in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox won't start] Knowledge Base article.
Hopefully this helps!

10/14/2014 - Release - AIR 15 Runtime and SDK - build no. confusion

the latest release build of AIR15.0 10/14/2014 appears to be exactly the same build as the one released on 10/02/2014
both downloads give AIR 15.0.0.302 --- is this an error .... ?
its all getting very confusing ...
was expecting a new build number for the latest release 10/14/ , updated docs etc ?

Sometimes the release version has a later build number than the last beta we received, which in a way can be even worse than if the build is the same. The thing that has caused some confusion is that a few posts here have been answered with "we've fixed that and it will be in the next build", and the next build turned out to be the same as the previous build.
So, I think the truth is that those things are fixed in the next build that appears on labs, and the release one doesn't count as a new beta build. I don't know when the next labs build will be.

Bursting program errors and last info on log file is: Start bursting proces

Hi,
I am new to bursting concepts. I created bursting file for the invoice and invoice program runs and calls the burst program and burst program errors.
Can you help? I have set the temp directory as /var/tmp
XML/BI Publisher Version : 5.6.3
Request ID: 16757790
All Parameters: ReportRequestID=16757789:DebugFlag=Y
Report Req ID: 16757789
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ODBTST
Preparing parameters
null output =/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757790.out
inputfilename =/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757789.out
Data XML File:/u01/oracle/devcomn/admin/out/DEV_odbtst/o16757789.out
Set Bursting parameters..
Temp. Directory:/var/tmp
[102110_093551746][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[102110_093551752][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.3 of 9 Barcode.normal.normal=truetype./usr/local/oracle/fonts/3OF9.TTF, system-temp-dir=/u01/oracle/devcomn/temp, user-variable:cp:parent_request_id=16757789, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=16757790, user-variable.OA_MEDIA=http://oapdev.pdcorp.com:8001/OA_MEDIA, font.GnuMICR.normal.normal=truetype./usr/local/oracle/fonts/GnuMICR.ttf, user-variable:cp:org_id=81, user-variable:cp:DebugFlag=Y, user-variable:cp:responsibility=50290, user-variable:cp:user=NATHANV, user-variable:cp:reportdescription=PD Invoice Burst, user-variable:cp:language=en, user-variable:cp:ReportRequestID=16757789, font.Free 3 of 9 Extended.normal.normal=truetype./usr/local/oracle/fonts/FRE3OF9X.TTF, user-variable:cp:locale=en-US, user-variable:cp:territory=US}
Start bursting process..
Start of log messages from FND_FILE
End of log messages from FND_FILE
---------------------------------------------------------------------------

i have few BG jobs running at backend, but i dont think that could be a problem. I have these jobs running
ESH_IX_PROCESS_CP_20100621051308
EU_PUT
EU_REORG
RPTMC_CREATE_CHANGEPOINT_AUTH
i cancelled the last one and first job is for trex indexing for changed object i SAP hR master data. middle two i dont know the purpose.
do you think these could be problem?
Mani

I was updating ITunes and got error message that program cannot start because MSVCR80.dll is missing

I was updating ITunes and I got an error message that program can't start because MSVCR80.dll is missing. what do I do?

I have the same problem and in following the Apple recommended procedures of unistalling Apple iTumes and related programs I am not able to unistall"Apple Mobile Device Support" as recommended. It is recommended that I delete all related files before installation! How do I proceed?

RH10 variable and build tag source file names

I'm using RH10 and outputting to WebHelp. My company requires that I archive project source files to our CVS via Eclipse. I am not using RoboSource_Control and must use the company's development resources for archiving.
Since archiving the initial project, I have been uploading only source files with modified dates.
However, I have discovered that the files I thought were storing user variables and build tags are not the correct files to archive. Since I am uploading all files with a newer date and that's not working, I need to know the user variable source file name and the build tag source file name that stores the currently defined variables and build tags.
I have already tried the WebHelp forum and was directed to this forum to pose the question because I'm looking for source file information instead of output file information.
Thanks for your help!
karen

Yes, Eclipse does work that way. However, we do not use our development directory as the local Eclipse repository. I need to move changed files to the local repository (stores all source files in the project) so that Eclipse can upload changes to the server. Yes, this is planned redundancy.
That said, it is not acceptable to spend the time copying all files in the large projects from the work folder to the local repository. I simply need to know which individual files to copy that include the currently defined variables and build tags. Note, we do not copy the SSL folder output files to our local source file repository, or other associated reference files that are not actually project source files.
Can you find someone who knows which files I need?
Thanks,
karen

Pdf files in my iPad2 can't be restored in my new ipad Air's iBooks and iAnnotate

pdf files in my iPad2 can't be restored in my new 128GB ipad Air's iBooks and iAnnotate

More specifically, the pdf files in iAnnotate app in iPad 2 could not be restored in the same app in iPad Air.

Cannot install ipa-File because of wrong signature

Hello,
I would like to build an ipa-File with Viewer Builder for an iPad-Distribution.
I have configured the Folio in the Viewer Builder and downloaded the ipa-File with the correct Developer-Certificate/Provisioning profile and -Signature.
If I install the file on an iPad, that is included in the Certificate,I get the following error on the Xcode-Console:
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 verify_signer_identity: Could not copy validate signature: -402620395
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 preflight_application_install: Could not verify executable at /var/tmp/install_staging.3OYlbE/foo_extracted/Payload/viewer.app
May 16 13:56:20 unknown com.apple.itunesstored[218] <Notice>: MobileInstallationInstall: failed with -1
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 install_application: Could not preflight application install
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 handle_install: API failed
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 send_message: failed to send mach message of 71 bytes: 10000003
May 16 13:56:20 unknown installd[221] <Error>: 2ffac000 send_error: Could not send error response to client
I have created a new Provisioning profile and updated the Viewer Builder on version 2.0.1.
Do you have an idea how it will work?
Thanks in advance.
Stephan

What I forgot to mention: an update of Mac OS X (10.7.4) before it worked two weeks ago with the same signature and provisioning profiles already.

I deleted my launchagent by mistake and now I cannot start my Imac

By mistake I deleted my launchagent and now I cannot start my IMac, can anybody help me

wasemthedream wrote:
the cd is os x 230.1.2
I have no clue what that means. If you are the owner of the iMac, which OS is currently installed? Since it appears you have a CD what color is the label and which OS is showing on the label?
CLICKY CLICK---> http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers
I cannot start the Imac up, it goes straight to grey screen.
I know my pasword and everything but its telling me that its not the id I bought it with and I never had or used any other
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

HT201272 I purchased the August 2012 edition of Consumer Reports and I get an (Error During Download Cannot start the download because the file is missing or invalid)

I purchased the August 2012 Edition of Consumer Reports and I get (Error During Download Cannot start the download because the file is missing of invalid)

Contact support and see if they cna give you a fresh copy. It's probably with the file..

6/10/14 - Release - AIR 14 Runtime and SDK

Today we're pleased to announce that the next version of AIR is available for immediate download.
This update includes the following fixes and security updates:
Security update details can be found here: Security Bulletin (APSB14-14)
New Features:
Anisotropic Filtering
This new texture sampling filter can enhance the image quality of textures on surfaces that are at oblique viewing angles. There are two ways to enable this feature:
In AGAL, set one of the values – "anisotropic2x", "anisotropic4x", "anisotropic8x", or "anisotropic16x" to the filter option in the sampling instructions.
Call Context3D::setSamplerStateAt with the 3rd parameter "filter" being one of the values defined in Context3DTextureFilter - "ANISOTROPIC2X", "ANISOTROPIC4X", "ANISOTROPIC8X", or "ANISOTROPIC16X"
New Stage3D "Standard" Profile
Developers can now request this high level profile when creating Context3D. Three new features are available in this profile:
Multiple render target allows to you to draw geometry to multiple outputs (up to 4) during one drawing
Floating point texture allows you to create Texture, RectangleTexture and CubeTuxture with the RGBA16F folder.
AGAL v2 contains these improvements:
Increased register size
Partial derivative instructions
Fragment depth output
Conditional forward jump
Intel x86 Android Support
As announced in our Flash Runtime blog, we're adding support for Intel x86 Android to AIR. An ADT command line option (-arch) has been added to allow packaging apps with Android x86 support. Please note that currently only captive runtime packaging is allowed for x86 architecture. This means all APK targets (apk, apk-debug and apk-captive-runtime) will forcibly be packaged with captive runtime. Feedback on this approach is encouraged.
Sample APK packaging command for x86 devices:
adt -package -target ( apk | apk-captive-runtime ) -arch x86 -storetype pkcs12 -keystore abc.p12 HelloWorld.apk HelloWorld-app.xml HelloWorld.swf
adt -package -target apk-debug -arch x86 -storetype pkcs12 -keystore abc.p12 HelloWorld.apk HelloWorld-app.xml HelloWorld.swf
Note that -arch is optional. If not specified, armv7 is assumed.
Packaging for x86 architecture in Flash Builder:
Open the debug/run configurations of the project in Flash Builder and click on "Customize launch.." button. Add a new parameter "-arch" with value "x86" and place it before "-storetype". Click "OK" to apply changes.
Except for RTMPE and DRM, all other features and capabilities are completely functional and supported. Native extensions written for x86 platforms can also be packaged and used by an app for x86 devices. To support this, a new ANE platform 'Android-x86' is now available.
The following example highlights the usage of the same -
<extension xmlns="http://ns.adobe.com/air/extension/14.0>
<id>com.adobe.sample.ane</id>
<versionNumber>1.0</versionNumber>
<platforms>
<platform name="Android-ARM">
<applicationDeployment>
<nativeLibrary>sample.jar</nativeLibrary>
<initializer>com.example.ane.Extension</initializer>
<finalizer>com.example.ane.Extension</finalizer>
</applicationDeployment>
</platform>
<platform name="Android-x86">
<applicationDeployment>
<nativeLibrary>sample.jar</nativeLibrary>
<initializer>com.example.ane.Extension</initializer>
<finalizer>com.example.ane.Extension</finalizer>
</applicationDeployment>
</platform>
</platforms>
</extension>
New packaging command for ANE:
adt -package -target ane Sample.ane extension.xml -swc Sample.swc -platform Android-ARM -C Android-ARM/ . -platform Android-x86 -C Android-x86/ .
Improved Packaging Engine - iOS
Based on the feedback received from the developer community, tons of improvements and bug fixes have been made in the new packaging engine for iOS. We encourage developers to report issues to http://bugbase.adobe.com, to ensure that we are able to continue to improve the packager in future releases.
To enable this feature, please use "-useLegacyAOT no" in the ADT command, before the signing options. As of now, this feature is not available within Flash Pro but it can still be used with Flash builder by adding the parameter -useLegacyAOT under the "Customize launch" option.
Here is an example ADT command for compiling an applications using “-useLegacyAOT no":
adt -package -target ( ipa-test | ipa-debug | ipa-app-store | ipa-ad-hoc) -useLegacyAOT no -provisioning-profile -keystore -storetype pkcs12 -storepass xxxx HelloWorld.ipa Helloworld-app.xml HelloWorld.swf
For more information, please visit Faster compiling with AIR for iOS
AIR Gamepad
AIR Gamepad feature enables the app developers to provide a second screen on Android mobile devices for the Flash based browser games. AIR Gamepad API enables Flash based browser apps to connect to a paired Android device running the AIR Runtime app and therefore allowing the Android devices to be used as game controllers or second-screen interfaces.
Key functionality of this feature:
Gesture eventsTouch events
Accelerometer events
Vibration
Customize the AIR gamepad screen by applying your own skins
To learn more about the AIR Gamepad APIs, please refer to the documentation found here.
To try out the Wand.swc which can be downloaded from here.
Live samples of AIR Gamepad can be tested using the following links:
ModelViewer
HungryHero
For more information, please visit Android devices with AIR as gamepads
Fixed Issues:
[IOS] Resolves an issue introduced in AIR 4.0.0.1390 where DatagramSocket was not receiving packets (3747382)
[IOS] Values are now set correctly when assigning Vector3D.Y_AXIS to a Vector3D object with -useLegacyAOT=no[Android] Browse file dialog called by FileReference.browse() is correctly displayed on the Nexus 7 and Xoom 4.1.2 (3721032)
[Android] is ignored for all but one extension when multiple extensions are used (3761458)
[x86][Android] Workers get terminated even without calling terminate function (3755006)
[Android] Setting the restrict property on a StageText instance and adding or removing text incorrectly add extra characters. (3749699)
[iOS] Values are now set correctly when assigning Vector3D.Y_AXIS to a Vector3D object with useLegacyAOT=no (3744595)
[iOS] ANE doesn't include libraries through platform.xml and throws error on packaging the IPA (3743946)
[iOS] DatagramSocket not receiving packets on iOS (3742982)
[iOS] Not able to debug/launch iPad iOS Simulator from Flash Builder. Note: One needs to set a environment variable using the command: launchctl setenv AIR_IOS_SIMULATOR_DEVICE "iPad Retina” Then restart the process and run the application on simulator device of his/her choice. By default iPhone is launched. (3728052)
[iOS] Not able to debug AIR app in iOS Simulator from Flash Builder when Xcode below 5.x is installed (3727760)
[iOS7] StageText fontWeight/fontPosture API does not work (3724627)
[Android] R$Styleable.class goes missing from the final AIR app APK though is included in ANE. (3723876)
[Android] Starling throws Buffer creation failed. Internal error while createVertexBuffer (3756123)
[Win] Ctrl+A, Ctrl+C and Ctrl+V now work correctly in StageText fields (3708480)
Multiple security and stability fixes
Known Issues:
[Android] Missing support for XXXHDPI icon on Android 4.4 (3730948)
[x86][Android] Export Release Build from Flash Builder fails to run app on Android device when -arch parameter is used. (3759405)
[Android]Captive packaging fails for APK using multiple ANEs, throws OutOfMemoryError. (Workaround: run export _JAVA_OPTIONS='-Xms4096m -Xmx4096m' and then run the packaging command). (3766280)
[iOS8] A notification dialog is coming after launching any AIR applications. (3771162)
[Android] ADT Does not pass required heap space to dx.jar (3771118)
[Android] StageText restrict = "A-Z" not blocked lowercase letters input. (3769801)
[iOS] Package IPA file with ipa-app-store or ipa-ad-hoc type will case logic judgment with incorrect (3768506)
[Android] StageText displayAsPassword displays text without mask in landscape on Android (3768443)
Download Locations:
AIR 14 runtime for Windows: 14.0.0.110 Runtime Download
AIR 14 runtime for Macintosh: 14.0.0.110 Runtime Download
AIR 14 SDK & Compiler for Windows: 14.0.0.110 SDK & Compiler Download
AIR 14 SDK & Compiler for Macintosh: 14.0.0.110 SDK & Compiler Download
Note: To provide all the all the necessary tools for our developers in one place and avoid having to download multiple components, we are packaging Adobe AIR 13 SDK and ActionScript Compiler 2.0 in a single SDK called “Adobe AIR 13 SDK & Compiler”.
AIR SDK 14 (Compatible with Flex) for Windows: 14.0.0.110 SDK Windows Download
AIR SDK 14 (Compatible with Flex) for Macintosh: 14.0.0.110 SDK Macintosh Download
Previous versions of the AIR runtime and SDK can be found on the Archived AIR SDK and Runtimes page

OK! Let's take 7 steps ... an easy answer to a focus problem not a machine problem. (MAC!)
1.1. Download the Adobe Flash Player file version 14 at Adobe - Install Adobe Flash Player
1.2 or dowonload the above link: http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
2.1 Double-click the AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg in your download folder
4. Do not double-click the red face (png file) - Installer "Install Adobe Flash Player".
5. Right click the face to perform a precise selection: Show Package Contents.
6.1 Select - Contents and double click; Select - Resources and double click; Select - Adobe Flash Player.pkg and double click.
6.2 Warning!! Select - Contents and double click; Select - Resources and double click; Select - app.bundle and copy it to your internet plugin folder (more work!!)
7. Select: Continue and complete your installation.
R. Alexander

2/12/2015 - Release - AIR 16 Runtime and SDK

Today we're pleased to announce that the next version of AIR is available for immediate download. In addition to important bug and security fixes AIR 16 now contains support for iOS 64-bit applications along with significant Stage3D improvements!
Please note that in today's release, only the Windows shared runtime was updated. The Mac version remains at 16.0.0.245.
Below are some of the key features and benefits of AIR 16. Please see our release notes for full details.
New Features:
iOS 64-bit Support
As many of you are aware, Apple has recently changed their iOS requirements to enforce 64-bit compatibility. We’re pleased to announce that the AIR 16 SDK can now be used to generate universal IPA binaries, which will run on both 32bit and 64bit iOS devices. Going forward, every IPA generated using AIR SDK 16 and above will be a universal binary and there is no change required in the packaging commands for this support.
Please note that support for creating universal IPA binaries will only be available in the new compiler. The legacy compiler is not (and will not be) compatible with iOS 64-bit. Because of this, it will be removed with version 16 of the AIR SDK. To ensure that Adobe as well as third party tools are able to work with this AIR SDK, the -useLegacyAOT option will continue to exist, but will be internally mapped to the new compiler.
With this change, any ANE that gets packaged in the application should contain the universal native libraries. Failing to do so will result in “Apple App Store allows only universal applications. <binary name> is not a universal binary. Please change build settings in Xcode project to "Standard Architecture" to create universal library/framework” error while packaging the ipa.
To learn more about the improved packaging engine, please read Faster Compiling with AIR for iOS.
If you encounter packaging or runtime issues, please report them to us over at http://bugbase.adobe.com. Please provide detailed steps to reproduce along with sample projects. If you'd like to keep your code private, please feel free to email attachments along with your bug number to [email protected].
Stage3D Wireframe Mode Support
To help designers and developers create robust and efficient 3D content, we've added Wireframe support into AIR desktop. This option can be changed by setting Context3D's setFillMode() to "wireframe" or "solid".
Stage3D - Standard Constrained Profile
In version 14 of the Runtime we added the new Standard profile to desktop systems. In Version 15 we expanded that to mobile devices in AIR. In Flash Player 16 we've added a new Standard Constrained profile. Like Baseline Constrained, Standard Constrained targets older and lower powered GPUs on both desktop and mobile devices. While Standard profile reached ~21% of iOS devices, Standard Constrained can now reach more than 85%. Developers can access this by using the new STANDARD_CONSTRAINED constant in Context3DProfile. The chart below breaks down the differences between the different profiles that are available.
Fixed Issues:
[iOS8, iPad] Application hangs on returning back to stage after importing an image from the gallery on an iPad. (3916940)
[iOS] App screen does not render properly when a device is rotated to an upside down position. (3916521)
[iOS] Push notification is not working on iOS devices as notification permission pop ups did not appear on app launch. (3928304)
[iOS64] LC_VERSION_MIN_IPHONEOS is set incorrectly when ANE of higher/lower minOSversion is used.
Packaging fails with error "Unable to find llvm JNI lib in", when an application is packaged with -useLegacyAOT yes option.
Graphical glitches with bitmap smoothing and scaling.( 3915192)
Known Issues:
Application UI items are not clickable after changing application rotation to landscape to portrait. (3924470)
Screen does not render properly when enter foreground from background. (3919996)
Download Locations:
AIR 16 runtime for Windows: 16.0.0.273 Runtime Download
AIR 16 runtime for Macintosh: 16.0.0.245 Runtime Download
AIR 16 SDK & Compiler for Windows: 16.0.0.292 SDK & Compiler Download
AIR 16 SDK & Compiler for Macintosh: 16.0.0.292 SDK & Compiler Download
Note: To provide all the all the necessary tools for our developers in one place and avoid having to download multiple components, we are packaging Adobe AIR 16 SDK and ActionScript Compiler 2.0 in a single SDK called “Adobe AIR 16 SDK & Compiler”.
AIR SDK 16 (Compatible with Flex) for Windows: 16.0.0.292 SDK Windows Download
AIR SDK 16 (Compatible with Flex) for Macintosh: 16.0.0.292 SDK Macintosh Download
Previous versions of the AIR runtime and SDK can be found on the Archived AIR SDK and Runtimes page

Sometimes the release version has a later build number than the last beta we received, which in a way can be even worse than if the build is the same. The thing that has caused some confusion is that a few posts here have been answered with "we've fixed that and it will be in the next build", and the next build turned out to be the same as the previous build.
So, I think the truth is that those things are fixed in the next build that appears on labs, and the release one doesn't count as a new beta build. I don't know when the next labs build will be.

AIR 3.9 and iOS7 Build Release .ipa File Cannot Start

Similar Messages

Maybe you are looking for