Air and Samsung NV10: not mounting.

I'm having the same problem as this guy
http://discussions.apple.com/thread.jspa?threadID=1513075&tstart=91
In the system profiler, I can see that the camera has connected, but it's not being mounted, nor is it showing up in the finder.
System profiler info as follows.
USB Device:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: SAMSUNG
Product ID: 0x1043
Serial Number: 0000000104C52004
Vendor ID: 0x0839
Samsung have replied to a few support requests, but haven't got an answer, and it seems this issue is restricted to the 'air.
Anyone got any ideas? Any way to manually mount this camera, even just as a mass storage device?
tia
a

I'm having the same issue with my Canon DSLR's with the Canon software they provide, however the camera hooks up fine using Aperture.
This sounds like a Samsung Software issue to me

Similar Messages

I have a MacBook Air and I use "Notes" when I delete a folder it comes back. How do I permanently delete it?

I have a MacBook Air and I use "Notes" when I delete a folder it comes back. How do I permanently delete it?

it all depends on what's running in the macbook air that causes it to heat up.
open activity monitor - change my processes to all processes - and on the %CPU, click it twice and see what running using 10% and above in the %CPU section.
highlight anything that are using high CPU percentage and hit quit process. see if that brings the temperature back down to normal.
screenshot below is my activity monitor - have a look at it - nothing over 10% on the %CPU section.

Mount: Label oracrsfiles occurs on both /dev/sdc and /dev/sdd1 not mounted

Dear All,
I think i have run the following command on both nodes:
# mount -t ocfs2 -o datavolume,nointr -L "oracrsfiles" /u02/oradata/orcl
and now when i mount linux1 where i am performing all the major steps to configure RAC it gives the following error.
mount: label oracrsfiles occurs on both /dev/sdc and dev/sdd1 not mounted.
I want to rever everything and start the mount procedure again.
Please help me, my OS is oracle enterpise linux and oracle is 10gR2.
Regards,
Imran

kindly help on this.
Regards, Imran

I just got the mid 2011 macbook air and it does not have ilife or iPhoto on it...isnt it supposed to come with it? and if it does then how do i get it on the mac without having to pay for it in the app store?

I just got a macbook air and i thought that it was supposed to come with ilife already installed? But there is not ilife apps...how do i get it on the laptop without having to buy them all from the app store if it was supposed to come with it?

From the iPhoto Licence:
3. Transfer.
A. Apple Software obtained from the Mac App Store is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so.
B. For any preinstalled Apple Software, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that: the Apple Software is transferred together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; (iv) you have not associated the Apple Software with your Mac App Store account as set forth in Section 2B; and (v) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License.
If the previous owner accepted the preinstalled software (iPhoto, etc) to the AppleID, it cannot be passed on to a new owner. Even if the previous owed would use her or his Applied to install it for you, you would never be able to reinstall it or to update it.
In that case buy your own copies of the software.

External Hard drive and dmg files not mounting

External Hard drive and dmg files suddenly not mounting. Im running Mavericks on 27" iMac. Anyone have a fix or has anyone else suddenly had this problem? There was a Mavericks update a few weeks ago, but things were fine until today. This is weird. Ive checked in disk utility and can see one of my two external HD's, the one that I back up. But not even this will mount. Ive tried repairing HD thinking it was damaged but now see that all my ext hd's suddenly dont mount. Ive tried several mac restarts.

Solved the problem. My external HD is a WD (My Book Studio). I needed to install updated driver manager and this fixed it:
http://support.wd.com/product/download.asp?groupid=114&sid=62&lang=en
If you have a WD external HD goto the above link and search for your model and a list of updates will be shown, Yay!!

Hard Drive and Disk Image not mounting

Hey everyone,
I'm running a G5 Dual 2Ghz. with OSX 10.5.8 I'm having problems with a back up hard drive. It is an external Western Digital My Book 1.5TB SATA drive. After using it for a few months, it suddenly did not mount anymore.
*1) It also would not appear in Disk Utility.*
a) Disk Warrior couldn't find the drive (I think because it's formatted with FAT32)
*2) I then took the drive out of the enclosure and put it in the spare bay in the G5.*
a) It didn't mount
b) It did show up in Disk Utility
c) In Disk Utility it wouldn't give me the option to Repair Disk Permissions or Repair Disk
d) In Disk Utility is says under Partition Scheme: Unformatted
e) In Disk Utility I don't have the option to mount/eject only gives me the "info" option
f) Tech Tool did find the drive and it passed all tests
g) Disk Warrior still did not find the drive
h) TestDisk finds the drive, but does not find any partitions
*3) I then created a disk image of the drive in Disk Utility onto an external hard drive. The image comes back at 320GB, which seems to be about right I think.*
a) The disk image would not mount with Disk Image Mounter. It would say there is an Unrecognized File System
b) In Disk Utility - I don't have the option to Repair Disk Permissions
c) In Disk Utility - When trying to Repair Disk - I get the error: Repairing Disk failed with error Unrecognized FileSystem
d) In Disk Utility - If I click Open - The Log file says:
+Attach Image+
Initializing...
Verifying...
Finishing...
+Image of "disk0.dmg" attached successfully+
+Mount of "disk0.dmg" succeeded+
-But it is no where to be found
e) Disk Warrior can not find the Disk Image
f) I took the new external drive with the Disk Image to 3 other mac computers but the image would not mount
*4. Other things I've tried when opening the Disk Image for the new external drive.*
a) in Terminal - hdiutil attach -nomount "volumes/untitled/disk0.dmg"
b) in Terminal - sudo hdiutil attach -nomount "volumes/untitled/disk0.dmg"
c) Deleting files System/Library/Extensions.kextcache
System/Library/Caches/com.apple.kernalcaches
ALL UNSUCCESSFUL
I'm running very low on ideas. I know I could just erase the drive and reformat it, but the files on it are very important and must be recovered.
Any help or suggestions would be very helpful. I will not have time until after the weekend to try more things. Thanks in advance if you do not hear back from me until after this weekend.

Yes, it will. But if DU says the disk is unformatted then it is also not accessible. If you have files you don't wish to lose then you will need to try recovery software:
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

First time user of Mac(Book Air) and mouse sensitivity not high enough

First time user of Mac(Book Air) and one thing that has bothered me is when I use a generic USB mouse and I've set the tracking speed/sensitivity to the max and it's still not high enough and it just irritates me to no ends. Am I not doing something properly being a first time mac user? Thanks in advance for any response.

Depends on the mouse. "Laser" with shorter wavelengths are far too sensitive for me and need to be dialed down. IR is worthless in my opinion because they cannot move properly across a black/white checkerboard.
I actually (to my great surprise) love using the trackpad and hate to use the mouse because trackpad keeps my thumbs directly between my hands while typing. But that is just me.

Apple AirPort WiFi connects to MacBook Air and iPad but not iPod Touch

I got my iPod touch 4th Gen in December for xmas and the wifi has worked perfectly fine until about a week ago only on my ipod, it just says 'Unable to Connect' everytime I try and connect but works on my MacBook Air and iPad
It's a WPA2 Personal security
I've tried all the suggestions on the Apple Support page, including resetting the network settings

Does the iPod connect to other networks?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi.. i got an macBook air and i can not get with face time it saids the server has found an error try later. i just move to holland is that the reason?

Hi... i got a MacBook Air and im trying to use face time i already sing in but it saids that the server has found an error with registration.. i was living in mexico city but i just move to holland is that the reason? thanks!!

Hello, lulufrommexico df.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles I would recommend going through when experiencing this issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Cheers,
Jason H.

Macbook Air (and Ipad) do not detect Airplay devices

I am literally going crazy already with this issue.
I have a Macbook Air OSX Version 10.9.2, an iPad 2 and the latest Apple tv. Airplay used to work but a few months ago it just stopped working.
We bought a brand new router, all devices are connected to the same network and for some reason my macbook does not detect an airplay device.
I have searched through every single forum on the web and have tried everything - restarting router, apple tv, computer, iPad. Turning airplay on and off. I am running all devices with the latest updates (including our router). But there is no fix! Neither my macbook nor my iPad detect the apple tv to airplay.
Please somebody help!

See this page about the reccomended networking settings for AirPlay. It is most likely due to your router.
I hope I helped.
Austin

I bought a mac air and ilife is not on it

I bought a new mac air lastest version and the ilife is not on it. Is it possible the person who sold it to me accidently took it off when he wiped his data off and reinstalled everything.

So it was a second-hand Mac not a new one?
You will have to purchase iLife from the App Store.

Udev and SCSI partitions not mounted

I have just attempted to convert devfs to udev on my dual AMD Opteron with two SCSI drives running fully up-to-date Arch Linux. The result of following the standard udev procedure (which has worked on three other IDE machines without a hitch) was that of the four mountable SCSI disk partititions, only swap and / were mounted properly
/dev/discs/disc0/part1 / reiserfs defaults 0 0
dev/discs/disc0/part2 swap swap defaults 0 0
while the /home and /data partitions were not recognized and mounted:
/dev/discs/disc0/part3 /home reiserfs defaults 0 0
/dev/discs/disc1/part1 /data reiserfs defaults 0 0
I was able to revert the machine back to its original devfs so the machine does work properly in its original configuration.
I noticed a bash script in the /etc/udev directory that seemed to be used to identify the SCSI devices present. Is it possible that this is not working correctly? Does anyone have any idea of how the SCSI configuration could have gone awry?
Thanks.
Some details about the machine:
arch version: Arch Linux 0.7 (Wombat)
kernel version: 2.6.7
two processors: AMD Athlon(tm) MP 2600+
two SCSI_storage_controllers: Adaptec AIC-7899P U160/m (rev 1).

Once again, I installed archlinux on an scsi machine, and have been cought in the boot-scsi-device-fails-udev-trap. This time, I had a bit of time. Instead of editing the fstab entries, I decided to find out why ide devices are handled well, and scsi devices are not.
Have a look at udev.rules. You will find an entry for ide block deviced there, that creates devfs symlinks:
# ide block devices
BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", NAME="%k", SYMLINK="%c{1} %c{2}"
You will notice also there are no similar entries for scsi block devices. Therefore, their nodes will not fit devfs scheme. Now, let's have a look at /etc/udev/. You will find scsi-devfs.sh there. This script will create devfs-like nodes for scsi blocks. Now the problem is clear, isn't it. Add the following lines to udev.rules:
# scsi block devices
BUS="scsi", KERNEL="sd*", PROGRAM="/etc/udev/scsi-devfs.sh sd %b %n", NAME="%c{1}", SYMLINK="%c{2} %k %c{3} %c{4}"
BUS="scsi", KERNEL="sr*", PROGRAM="/etc/udev/scsi-devfs.sh sr %b %n", NAME="%c{1}", SYMLINK="%c{2} %k %c{3} %c{4}"
BUS="scsi", KERNEL="st*", PROGRAM="/etc/udev/scsi-devfs.sh st %b %n", NAME="%c{1}", SYMLINK="%c{2} %k %c{3} %c{4}"
BUS="scsi", KERNEL="sg*", PROGRAM="/etc/udev/scsi-devfs.sh sg %b %n", NAME="%c{1}", SYMLINK="%c{2} %k %c{3} %c{4}"
Now the devfs naming scheme should be used for scsi devices, too. Surprisingly, it isn't. Any hints are welcome.

Blank CD's and DVD's not mounting - burnt disks do!

I am unable to burn CD'd and DVD's. I insert the disk, it goes in and remains in but then - Nothing. My prefs are set to Ask what to do, but none of the pref options have any impact. I can then eject the disk using the eject button. Disk Utility and System Profiler shows the Optical drive as
Media:
Type: CD-R
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Write Speeds: 8x, 16x, 24x
If I have a CD-R in the disk- so the drive is clearly identifying a blank.
Inserting a DVD+R returns
Type: DVD+R
ID: RICOHJPN R02
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Write Speeds: 2.4x, 4x, 6x, 8x
The optical drive is recognising the disk.
But the burn function is not booting.
This is independent of brand of disk. It loaded and burnt disks successfully previously and seems to be related to an OS update. I do this so rarely that I cant really date the start.
I am able to insert and read any type of burnt or recorded disks, CD's, DVD's and mount them.
Have repaired permissions and trashed anything that looks like a CD pref. Have the same problem on my wife's side so it looks like it is not limited to my user account but is a a high level system issue.

A blank disk should never mount. By definition, it has no filesystem and nothing to mount.
A blank disk should be detected and perform the action that you set in System Preferences > CDs & DVDs. If these are set to Ignore (or if the system is treating them like it's set to ignore), then nothing at all should happen when you insert a blank CD or DVD.
I would suggestion going to System Preferences and altering the setting for both CD and DVD to anything other than the value they are set at now, then insert a blank disk and see what happens. Also, try to burn a disk using a burn folder.

I purchased some songs on my mac book air and they are not available on my Mac even after some days and running Match

Hi,
I purchased some songs on iTunes using my mac book air. I tried to play them some days later on my Mac but are not available. I tried updating / running Match no joy.
any ideas?
thanks,
Kim Johnson

Thanks for the response. That was helpful. However, I still want to know why did the songs I purchased yesterday appear on my IPod for downloading but the those I purchased today did not? After you rassistance I went to settings and turned on automatic downloading for my ipod. So if it wasn't enabled yesterday, how was I able to see the purchases I made yesterday on my computer on the ipod and then download them to the ipod? That is what I expected to see today but all I was seeing were the songs I purchased yesterday and not the ones I did today.

MacBook Air and Seagate 3TB not working properly since Yosemite

Hey all, I'm stuck all of a sudden so I'm hoping someone can help.
I have a mid 2012 MacBook Air (1.8GHz i5, 4gb DDR3 Ram) and a Seagate 3TB external hard drive (model SRD0SD1). I've never had a problem with either of these units. I upgraded to Yosemite the other day but tonight was the first time I've really used my computer since then. I went to back up some photos/video from my iPhone to the drive, and during the transfer I got a warning about not properly ejecting the disk. I checked the connections thinking the USB may have come lose, but everything seemed fine. I plugged it back in and could only see the folders, no file. I restarted the computer and could see everything fine, which is awesome, however now I cannot write to the disk at all. I get an error saying, "OS X can't repair the disk Seagate. You can still open or copy files on the disk, but you can't save changes to files on the disk. Backup the disk and reformat it as soon as you can"
I tried repairing the disk in Disk Utility anyways, but I wasn't shocked when it didn't work. A friend of mine works in IT for a university and said this has been popping up a lot the past week or so. Does anyone have any insight/recommendations as to what to do next? I'd rather not replace the drive, it's less than 2 years old!
Thanks in advance for the help, it's much appreciated.

Seagate problems here too..
with a macbook pro 15 late 2013
Since the upgrade to Yosemite it does not read my 1 tb Seagate.
Icon does show on desktop, but finder wont open it.
I tried connecting the drive to an other mac and it works fine.
Other 3.0 usb devices work fine on the macbook.
So it seems to be a seagate-specific issue.

Air and Samsung NV10: not mounting.

Similar Messages

Maybe you are looking for