AIR-ANT2451NV-R
Hi guys,
I have another question about the AIR-ANT2451NV-R antenna: is it compatible with the Aironet 1250?
In the documentation for the antenna it says:
“This antenna is designed for indoor use with any Cisco Aironet 802.11N radio device that uses a RP-TNC connector.”
But the ANT2451NV-R is not listed in the Aironet’s 1250’s supported antenna list :
AIR-ANT5959
AIR-ANT2422DG-R
AIR-ANT4941
AIR-ANT2430V-R
AIR-ANT1728
AIR-ANT2506
AIR-ANT3213
AIR-ANT2460P-R
AIR-ANT2465P-R
AIR-ANT2485P-R
AIR-ANT2410Y-R
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
AIR-ANT5135DG-R
AIR-ANT5135D-R
AIR-ANT5140V-R
AIR-ANT5145V-R
AIR-ANT5160V-R
Thanks in advance!
This document outlines the specifications for the AIR-ANT2451NV-R dual band MIMO low profile ceilng mount antenna and provides instructions for mounting it. The antenna operates in the 2.4- and 5-GHz frequency ranges and is designed for indoor use.
Yes. That's the reason why this model has six (6) pig-tails. It's in the release notes of the IOS.
Similar Messages
-
Antenna AIR-ANT2451NV-R for Aironet 1262N AP
Hello everybody,
I want to use the AP on a little office and I think this antenna give a good performance,
what do you think?, any recommendation is accepted
Best RegardsHello, thanks for the comments.
On the Ceiling Panel 3 meters above the floor.
First AP coverage Area:
The coverages area is a rectangle 9 x 24 meters, with no more than 10 concurent users per area.
Second AP coverage Area:
The coverages area is a square 10 x 10 meters, with no more than 10 concurent users per area.
Best Regards -
Wireless Design - Best Practices for Data, Voice, and LBS
Hi,
I am currently in the process of designing a WLAN for a new hospital and I am getting some push back from my sales team. The requirements of the WLAN are data, voice, and location based services (RFID for medical equipment) ... needs to be 2.4 GHz for Guest and some apps/clients but primarily 5 GHz for most of the clients ... lastly needs to be N compatible for future use.
So, I did a predictive design with 1252's on the perimeter with 2.4 and 5 GHz patch antennas and 1142's in the middle to fill gaps ... I also scoped out 2 5508 for redundancy .... total design with -65 at my edges was 169. However, this is getting push back because of several cost issues ....
1. The bundle that Cisco offers for 5 100 AP license 5508 WLC is cheaper than buying 2 250 AP licenses WLC's ... which doesn't make any sense to me because I think 5 devices is over kill
2. The sales engineer is concerned about the power issues with the 1252's ... customer would rather not use power injectors ... and although they would have 6500's at there core ... they would only have basic switches in their IDF's so I wasn't sure which POE Switches would be able to handle 1252 but cost was an issue there as well
So, for my understanding when you are doing a WLAN design for LBS it's always best to have APs or antennas on the perimeter for better triangulation ... it makes more sense to me to do that with patch instead of Omni's ... however my sales engineer wants to use all 1142's ... so my question is what are the pro and cons behind using all Omni's or using Patch and Omni's?
Furthermore, if anyone has any documentation supporting why I would not use all Omni's that would be great because all the articles I have read on LBS just state that placement of APs is critical but doesn't give no specifics on whether it's a good practice to place them on the perimeter using a specific type of antenna or what.
Thanks in advance for you help and any ideas about this design!!!1. The 5508 is expensive because it's alot faster than the 4400 plus there are some features exclusive to the 5508 such as OfficeExtend. As the old network design adage goes: Your design can be done correctly, cheap or fast. Choose two.
2. The 1250 requires 19.5w of power to enable FULL MCS rates to both radios. Only the 3560E, 3750E or the Sup720 is capable of supporting that. Upgrading the IOS of the 1250 to 12.4(10b)JDA3 will allow the AP to operate both radios at 15.4w BUT at a lower MCS rates. Correct placement of the AP and the correct use of the antennaes will also help in the signal distribution.
3. Patch antennaes are mostly directional. The 1140 is onmi-directional BUT the signal strength is not as powrful as the 1250 at full power. The AIR-ANT2451NV is an omni-directional patch designed for the 1250.
Cisco Aironet Antennas and Accessories Reference Guide
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b.html
Some of the new patch antennaes for the 1250
Cisco Aironet Dual Band MIMO Low Profile Ceiling Mount Antenna (AIR-ANT2451NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2451nv.pdf
Cisco Aironet Very Short 5-GHz Omnidirectional Antenna (AIR-ANT5135SDW-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5135sdw.pdf
Cisco Aironet Very Short 2.4-GHz Omnidirectional Antenna (AIR-ANT2422SDW-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2422sdw.pdf
Cisco Aironet 5-dBi Diversity Omnidirectional Antenna (AIR-ANT2452V-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2452v.pdf
Cisco Aironet 5-GHz MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT5140NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5140nv.pdf
Cisco Aironet 5-GHz MIMO 6-dBi Patch Antenna (AIR-ANT5160NP-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5160np.pdf
Cisco Aironet 2.4-GHz MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2450NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2450nv.pdf
Cisco Aironet 2.4-GHz MIMO 6-dBi Patch Antenna (AIR-ANT2460NP-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2460np.pdf -
AP1252AG and selection of antenna
Hello-
Appreciate your assistance with the selection of antenna for AIR-AP1252AG-E-K9.
It will be installed in a big warehouse: 50 meters in length, 20 meters in width and 5 meters in height. I doubt we can mount it on ceiling, but on the wall only. Availability of 5GHz is not mandatory.
I was reading about AIR-ANT2451NV-R -- would it be OK if we go ahead with this antenna?
Thank you in advance.2.4 Ghz only? How about this:
Cisco Aironet 2.4-GHz MIMO 6-dBi Patch Antenna (AIR-ANT2460NP-R) -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Error in installing Adobe AIR runtime (Windows)
I've been trying to install TeeBoard to be used with OBS, however, AIR will not install no matter what i do. I've followed all the help on the support page and none of it worked. It keeps saying i need administrator access even though i'm running it as an administrator. Additionally, every time i double click a .air extension to try and install the application it wont open up with the windows installer.
[2014-03-10:19:54:56] Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
[2014-03-10:19:54:56] Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
[2014-03-10:19:54:56] No installed runtime detected
[2014-03-10:19:54:56] Invoking Application Installer for combined install
[2014-03-10:19:54:56] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIR1D44.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR1D44.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeHelp/AdobeHelp.air
[2014-03-10:19:54:56] Application Installer begin with version 3.1.0.4880 on Windows 7 x86
[2014-03-10:19:54:56] Commandline is: -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR1D44.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeHelp/AdobeHelp.air
[2014-03-10:19:54:56] No installed runtime detected
[2014-03-10:19:54:56] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeHelp/AdobeHelp.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla28A9.tmp
[2014-03-10:19:55:01] Application signature verified
[2014-03-10:19:55:01] Unpackaging/validation complete
[2014-03-10:19:55:01] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla398B.tmp
[2014-03-10:19:55:01] Native installation package creation succeeded
[2014-03-10:19:55:01] Starting silent combined runtime and app install.
Installing runtime version 3.1.0.4880.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 4.0.244 to C:\Program Files (x86)\Adobe using the source file at file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeHelp/AdobeHelp.air
[2014-03-10:19:55:01] Installing msi at C:\Users\JONATH~1\AppData\Local\Temp\AIR1D44.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
[2014-03-10:19:55:03] Installing msi at C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla398B.tmp\setup.msi with guid {7451619F-5377-BE39-26FC-4685CB012ABB}
[2014-03-10:19:55:07] Application Installer end with exit code 0
[2014-03-10:19:55:07] Subprocess app installer succeeded
[2014-03-10:19:55:07] Runtime Installer end with exit code 0
[2014-03-10:19:57:49] Runtime Installer begin with version 2.7.1.19600 on Windows 7 x86
[2014-03-10:19:57:49] Commandline is: -silent -eulaAccepted -programMenu WidgetBrowser.air
[2014-03-10:19:57:49] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-03-10:19:57:49] Invoking Application Installer for combined install
[2014-03-10:19:57:49] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIRC5A3.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC5A3.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeDreamweaverWidgetsBrowser1.0-mul/WidgetBrowser.air
[2014-03-10:19:57:49] Application Installer begin with version 2.7.1.19600 on Windows 7 x86
[2014-03-10:19:57:49] Commandline is: -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC5A3.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeDreamweaverWidgetsBrowser1.0-mul/WidgetBrowser.air
[2014-03-10:19:57:49] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-03-10:19:57:50] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeDreamweaverWidgetsBrowser1.0-mul/WidgetBrowser.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaCE89.tmp
[2014-03-10:19:57:50] Application signature verified
[2014-03-10:19:57:50] Unpackaging/validation complete
[2014-03-10:19:57:50] No app located for appID 'com.adobe.WidgetBrowser' and pubID ''
[2014-03-10:19:57:50] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaD0DA.tmp
[2014-03-10:19:57:51] Native installation package creation succeeded
[2014-03-10:19:57:51] Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app com.adobe.WidgetBrowser version 2.0 Build 348 using the source file at file:///C:/Users/Jonathon%20Beliveau/Downloads/Adobe%20CS6%20Master%20Collection/payloads /AdobeDreamweaverWidgetsBrowser1.0-mul/WidgetBrowser.air
[2014-03-10:19:57:51] Installing msi at C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaD0DA.tmp\setup.msi with guid {1907FB7F-C178-4C59-AB2B-1075AFF15FEB}
[2014-03-10:19:57:52] Application Installer end with exit code 0
[2014-03-10:19:57:52] Subprocess app installer succeeded
[2014-03-10:19:57:52] Runtime Installer end with exit code 0
[2014-09-21:01:35:35] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:35:35] Commandline is:
[2014-09-21:01:35:35] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:35:40] Relaunching with elevation
[2014-09-21:01:35:40] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\air3cfc.tmp\adobe air installer.exe -ei
[2014-09-21:01:35:41] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:35:41] Commandline is: -stdio \\.\pipe\AIR_10716_0 -ei
[2014-09-21:01:35:41] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:35:42] Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 15.0.0.249
[2014-09-21:01:35:42] Installing msi at c:\users\jonath~1\appdata\local\temp\air3cfc.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:35:43] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:35:43] Rolling back install of c:\users\jonath~1\appdata\local\temp\air3cfc.tmp\setup.msi
[2014-09-21:01:35:43] Rollback complete
[2014-09-21:01:35:43] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:35:43] Runtime Installer end with exit code 7
[2014-09-21:01:36:13] Runtime Installer end with exit code 7
[2014-09-21:01:36:41] Runtime Installer begin with version 15.0.0.249 on Windows Vista x86
[2014-09-21:01:36:41] Commandline is:
[2014-09-21:01:36:41] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:36:46] Relaunching with elevation
[2014-09-21:01:36:46] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\air3fab.tmp\adobe air installer.exe -ei
[2014-09-21:01:36:47] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:36:47] Commandline is: -stdio \\.\pipe\AIR_10476_0 -ei
[2014-09-21:01:36:47] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:36:48] Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 15.0.0.249
[2014-09-21:01:36:48] Installing msi at c:\users\jonath~1\appdata\local\temp\air3fab.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:36:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:36:48] Rolling back install of c:\users\jonath~1\appdata\local\temp\air3fab.tmp\setup.msi
[2014-09-21:01:36:48] Rollback complete
[2014-09-21:01:36:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:36:48] Runtime Installer end with exit code 7
[2014-09-21:01:36:50] Runtime Installer end with exit code 7
[2014-09-21:01:37:12] Runtime Installer begin with version 15.0.0.249 on Windows Vista x86
[2014-09-21:01:37:12] Commandline is:
[2014-09-21:01:37:12] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:37:17] Relaunching with elevation
[2014-09-21:01:37:17] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\airbb40.tmp\adobe air installer.exe -ei
[2014-09-21:01:37:17] Runtime Installer begin with version 15.0.0.249 on Windows Vista x86
[2014-09-21:01:37:17] Commandline is: -stdio \\.\pipe\AIR_10276_0 -ei
[2014-09-21:01:37:17] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:37:17] Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 15.0.0.249
[2014-09-21:01:37:17] Installing msi at c:\users\jonath~1\appdata\local\temp\airbb40.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:37:18] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:37:18] Rolling back install of c:\users\jonath~1\appdata\local\temp\airbb40.tmp\setup.msi
[2014-09-21:01:37:18] Rollback complete
[2014-09-21:01:37:18] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:37:18] Runtime Installer end with exit code 7
[2014-09-21:01:37:19] Runtime Installer end with exit code 7
[2014-09-21:01:37:57] Application Installer begin with version 3.1.0.4880 on Windows 7 x86
[2014-09-21:01:37:57] Commandline is: "C:\Users\Jonathon Beliveau\Downloads\TeeBoard\TeeBoard v0.1.5.air"
[2014-09-21:01:37:57] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:37:58] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla7877.tmp
[2014-09-21:01:37:58] Unpackaging/validation complete
[2014-09-21:01:37:58] Application has unknown namespace http://ns.adobe.com/air/application/3.7. Attempting immediate runtime update
[2014-09-21:01:37:58] Begin runtime update download from http://airdownload.adobe.com/air/3/windows/x86/add/3.7/update
[2014-09-21:01:37:58] Download destination is C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update
[2014-09-21:01:37:58] Unpackaging http://airdownload.adobe.com/air/3/windows/x86/add/3.7/update to C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update
[2014-09-21:01:38:16] Unpackaging complete
[2014-09-21:01:38:16] Download success
[2014-09-21:01:38:16] Successfully downloaded immediate update. Invoking downloaded installer
[2014-09-21:01:38:16] Launching subprocess with commandline C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update\updater -x1 file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:17] Application Installer end with exit code 0
[2014-09-21:01:38:19] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:38:19] Commandline is: -x1 file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:19] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:38:19] Invoking Application Installer for combined install
[2014-09-21:01:38:19] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp -withRuntime -url file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:19] Application Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:38:19] Commandline is: -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp -withRuntime -url file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:19] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:38:20] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaCEA1.tmp
[2014-09-21:01:38:21] Application signature verified
[2014-09-21:01:38:21] Unpackaging/validation complete
[2014-09-21:01:38:21] No app located for appID 'be.gip.twitch.TeeBoard' and pubID ''
[2014-09-21:01:38:33] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla329.tmp
[2014-09-21:01:38:34] Native installation package creation succeeded
[2014-09-21:01:38:34] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)\Air\Gip" -desktopShortcut -programMenu file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:34] Relaunching with elevation
[2014-09-21:01:38:36] Application Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:38:36] Commandline is: -stdio \\.\pipe\AIR_3768_0 -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)\Air\Gip" -desktopShortcut -programMenu file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:36] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:38:36] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaECC.tmp
[2014-09-21:01:38:37] Application signature verified
[2014-09-21:01:38:37] Unpackaging/validation complete
[2014-09-21:01:38:37] No app located for appID 'be.gip.twitch.TeeBoard' and pubID ''
[2014-09-21:01:38:37] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla1265.tmp
[2014-09-21:01:38:38] Native installation package creation succeeded
[2014-09-21:01:38:38] Starting silent combined runtime update and app install.
Updating runtime from version 3.1.0.4880 to version 15.0.0.249.
Installing app be.gip.twitch.TeeBoard version 0.1.5 to C:\Program Files (x86)\Air\Gip using the source file at file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:38:38] Installing msi at C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:38:38] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:38:38] Rolling back install of C:\Users\JONATH~1\AppData\Local\Temp\AIRC1C5.tmp\setup.msi
[2014-09-21:01:38:38] Rollback complete
[2014-09-21:01:38:38] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:38:38] Elevated install failed: error 0 1603
[2014-09-21:01:38:39] Application Installer end with exit code 7
[2014-09-21:01:38:47] Application Installer end with exit code 7
[2014-09-21:01:38:48] Subprocess app installer failed (7)
[2014-09-21:01:38:48] Runtime Installer end with exit code 7
[2014-09-21:01:38:59] Application Installer begin with version 3.1.0.4880 on Windows 7 x86
[2014-09-21:01:38:59] Commandline is: "C:\Users\Jonathon Beliveau\Downloads\TeeBoard\TeeBoard v0.1.5.air"
[2014-09-21:01:38:59] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:38:59] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla692B.tmp
[2014-09-21:01:39:00] Unpackaging/validation complete
[2014-09-21:01:39:00] Application has unknown namespace http://ns.adobe.com/air/application/3.7. Attempting immediate runtime update
[2014-09-21:01:39:00] Begin runtime update download from http://airdownload.adobe.com/air/3/windows/x86/add/3.7/update
[2014-09-21:01:39:00] Download destination is C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update
[2014-09-21:01:39:00] Unpackaging http://airdownload.adobe.com/air/3/windows/x86/add/3.7/update to C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update
[2014-09-21:01:39:04] Unpackaging complete
[2014-09-21:01:39:04] Download success
[2014-09-21:01:39:04] Successfully downloaded immediate update. Invoking downloaded installer
[2014-09-21:01:39:04] Launching subprocess with commandline C:\Users\Jonathon Beliveau\AppData\Roaming\Adobe\AIR\Updater\Update\updater -x1 file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:04] Application Installer end with exit code 0
[2014-09-21:01:39:07] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:39:07] Commandline is: -x1 file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:07] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:39:07] Invoking Application Installer for combined install
[2014-09-21:01:39:07] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp -withRuntime -url file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:08] Application Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:39:08] Commandline is: -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp -withRuntime -url file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:08] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:39:08] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\fla8A80.tmp
[2014-09-21:01:39:09] Application signature verified
[2014-09-21:01:39:09] Unpackaging/validation complete
[2014-09-21:01:39:09] No app located for appID 'be.gip.twitch.TeeBoard' and pubID ''
[2014-09-21:01:39:17] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaAD6C.tmp
[2014-09-21:01:39:17] Native installation package creation succeeded
[2014-09-21:01:39:17] Launching subprocess with commandline C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)\Air\Gip" -desktopShortcut -programMenu file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:17] Relaunching with elevation
[2014-09-21:01:39:19] Application Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:39:19] Commandline is: -stdio \\.\pipe\AIR_9760_0 -runtime C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)\Air\Gip" -desktopShortcut -programMenu file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:19] Installed runtime (3.1.0.4880) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2014-09-21:01:39:19] Unpackaging file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air to C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaB788.tmp
[2014-09-21:01:39:20] Application signature verified
[2014-09-21:01:39:20] Unpackaging/validation complete
[2014-09-21:01:39:20] No app located for appID 'be.gip.twitch.TeeBoard' and pubID ''
[2014-09-21:01:39:20] Converting unpackaged application to a native installation package in C:\Users\Jonathon Beliveau\AppData\Local\Temp\flaBAC4.tmp
[2014-09-21:01:39:21] Native installation package creation succeeded
[2014-09-21:01:39:21] Starting silent combined runtime update and app install.
Updating runtime from version 3.1.0.4880 to version 15.0.0.249.
Installing app be.gip.twitch.TeeBoard version 0.1.5 to C:\Program Files (x86)\Air\Gip using the source file at file:///C:/Users/Jonathon%20Beliveau/Downloads/TeeBoard/TeeBoard%20v0.1.5.air
[2014-09-21:01:39:21] Installing msi at C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:39:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:39:21] Rolling back install of C:\Users\JONATH~1\AppData\Local\Temp\AIR7B15.tmp\setup.msi
[2014-09-21:01:39:21] Rollback complete
[2014-09-21:01:39:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:39:21] Elevated install failed: error 0 1603
[2014-09-21:01:39:22] Application Installer end with exit code 7
[2014-09-21:01:39:23] Application Installer end with exit code 7
[2014-09-21:01:39:23] Subprocess app installer failed (7)
[2014-09-21:01:39:23] Runtime Installer end with exit code 7
[2014-09-21:01:44:06] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:44:06] Commandline is:
[2014-09-21:01:44:06] No installed runtime detected
[2014-09-21:01:44:10] Relaunching with elevation
[2014-09-21:01:44:10] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\aircf8.tmp\adobe air installer.exe -ei
[2014-09-21:01:44:10] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:44:10] Commandline is: -stdio \\.\pipe\AIR_3416_0 -ei
[2014-09-21:01:44:10] No installed runtime detected
[2014-09-21:01:44:10] Starting silent runtime install. Installing runtime version 15.0.0.249
[2014-09-21:01:44:10] Installing msi at c:\users\jonath~1\appdata\local\temp\aircf8.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:44:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:44:10] Rolling back install of c:\users\jonath~1\appdata\local\temp\aircf8.tmp\setup.msi
[2014-09-21:01:44:10] Rollback complete
[2014-09-21:01:44:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:44:10] Runtime Installer end with exit code 7
[2014-09-21:01:44:15] Runtime Installer end with exit code 7
[2014-09-21:01:44:25] Runtime Installer begin with version 15.0.0.249 on Windows Vista x86
[2014-09-21:01:44:25] Commandline is:
[2014-09-21:01:44:25] No installed runtime detected
[2014-09-21:01:44:27] Relaunching with elevation
[2014-09-21:01:44:27] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\air56b4.tmp\adobe air installer.exe -ei
[2014-09-21:01:44:29] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:44:29] Commandline is: -stdio \\.\pipe\AIR_5404_0 -ei
[2014-09-21:01:44:29] No installed runtime detected
[2014-09-21:01:44:30] Starting silent runtime install. Installing runtime version 15.0.0.249
[2014-09-21:01:44:30] Installing msi at c:\users\jonath~1\appdata\local\temp\air56b4.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:44:30] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:44:30] Rolling back install of c:\users\jonath~1\appdata\local\temp\air56b4.tmp\setup.msi
[2014-09-21:01:44:30] Rollback complete
[2014-09-21:01:44:30] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:44:30] Runtime Installer end with exit code 7
[2014-09-21:01:44:32] Runtime Installer end with exit code 7
[2014-09-21:01:50:38] Runtime Installer begin with version 15.0.0.249 on Windows Vista x86
[2014-09-21:01:50:38] Commandline is:
[2014-09-21:01:50:38] No installed runtime detected
[2014-09-21:01:50:43] Relaunching with elevation
[2014-09-21:01:50:43] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\air8f2.tmp\adobe air installer.exe -ei
[2014-09-21:01:50:45] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:01:50:45] Commandline is: -stdio \\.\pipe\AIR_9440_0 -ei
[2014-09-21:01:50:45] No installed runtime detected
[2014-09-21:01:50:45] Starting silent runtime install. Installing runtime version 15.0.0.249
[2014-09-21:01:50:45] Installing msi at c:\users\jonath~1\appdata\local\temp\air8f2.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:01:50:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:50:45] Rolling back install of c:\users\jonath~1\appdata\local\temp\air8f2.tmp\setup.msi
[2014-09-21:01:50:45] Rollback complete
[2014-09-21:01:50:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:01:50:45] Runtime Installer end with exit code 7
[2014-09-21:01:53:50] Runtime Installer end with exit code 7
[2014-09-21:02:16:54] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:02:16:54] Commandline is:
[2014-09-21:02:16:54] No installed runtime detected
[2014-09-21:02:16:56] Relaunching with elevation
[2014-09-21:02:16:56] Launching subprocess with commandline c:\users\jonath~1\appdata\local\temp\air134f.tmp\adobe air installer.exe -ei
[2014-09-21:02:16:56] Runtime Installer begin with version 15.0.0.249 on Windows 7 x86
[2014-09-21:02:16:56] Commandline is: -stdio \\.\pipe\AIR_10552_0 -ei
[2014-09-21:02:16:56] No installed runtime detected
[2014-09-21:02:16:56] Starting silent runtime install. Installing runtime version 15.0.0.249
[2014-09-21:02:16:56] Installing msi at c:\users\jonath~1\appdata\local\temp\air134f.tmp\setup.msi with guid {7BBAEC47-1CC0-4CB8-ADB4-531B78DBD1DD}
[2014-09-21:02:16:57] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:02:16:57] Rolling back install of c:\users\jonath~1\appdata\local\temp\air134f.tmp\setup.msi
[2014-09-21:02:16:57] Rollback complete
[2014-09-21:02:16:57] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2014-09-21:02:16:57] Runtime Installer end with exit code 7
[2014-09-21:02:16:59] Runtime Installer end with exit code 7Download and run the offline installer from http://get.adobe.com/reader/enterprise/
[topic moved to Adobe Reader forum] -
Cannot send email from my IPad Air
I suddenly cannot send email from my IPad Air. Keep getting message that my email recipient
was rejected by the server because it does not allow relaying. Don't understand what this means as I have been able to send email before.Paula, in most cases this message appears when you are sending email from a ISP server not in the pop settings and SMTP settings in your email program.
In example if I send out email from my iPad I must be on my own isp's server to send. I have roadrunner but if I send email out using say Verizon's email server I will get a reject notice.
You did not say what email program you are using but if it is hotmail or yahoo or your isp's email in two of these email accounts there are stand alone apps which work much better than the stock email program on the phone.
If you are using road runner or another ISP email you must get the proper Pop3 (incoming) server settings and SMTP (send) settings from your ISP
You can then just go into the Settings-Mail, Contacts and Calendar section and click on the email account and change to the proper settings from your ISP.
You could delete as you were told but why bother when only the sending and receiving settings need to be entered.
If the settings are correct, on an iPhone it tests the settings. If correct send an email. If incorrect you will need the proper settings from your ISP.
It is actually very easy to do.
Hotmail is not an option on my iPad air | Apple Support Communities
Problems with POP email accounts set up on iPad... | Apple Support Communities
Good Luck -
Flex application running under AIR takes a long, long time to start.
I have a flex application which runs on a desktop under AIR. The application has an assets folder with 3,500 mp3 soundclips totalling about 50MB. The problem is, the application takes around 90 seconds to load. I'm sure that AIR is scanning the application folder and doing something with the contents because if I delete the assets folder it loads in about 5 seconds. Does anyone know why AIR/Flex would do this, and why it doesn't exhibit the same problem if I run or debug in Flexbuilder on eclipse? It's making my killer app unusable!
Thanks
PauloWell, I've spent a bit longer looking at this now, and the problem appears to lie with my encrypted local store. The first thing that happens is for the app to read the product key from the ELS. But, it fails (for some unknown reason). So, the app seems to hang there for 90 seconds until it eventually renders the welcome screen. If I remove the assets folder it still fails to read from the ELS, but only takes a couple of seconds to start the welcome screen. This is where the scanning of the application folder seems to come into play, because if I remove the code which reads from the ELS the app starts within 2 seconds whether the asset folder is there or not.
I think the slow startup and the scanning of the assets folder are just symptoms of a different problem, i.e. a problem with the ELS. I don't have the same problem with my development environment though - it's only when I test deploy the application.
Thanks for your help on this problem EgorKDie. I think I should be able to resolve it once I can sort out why the ELS is being awkward. -
Can I return my macbook air that I brought during the holidays (Thanksgiving)
I was gifted a Macbook air during the thanksgiving season, and since I am a computer science developer ( a student to be precise), I want to return my Mac and opt in for a Windows machine ( so that I can get enough software support if needed, there are several people around me with a pc). I was wondering, how can I return my laptop ? What are the terms and conditions ?
Thank you in advance.I would think you cannot return a product after the return date has passed.
Call the Apple Store and ask them. -
Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?
I don't see why not. Do you foresee a special difficulty?
-
How do I use my Macbook Air with a display?
I wish to use the display with the Macbook Air. The screen on the MBA is too small for home use so I want to use the display instead. How do I do this? It's awkward to type on the MBA keyboard and then look at the display next to the MBA.
However I want to keep the MBA as my main computer because I like to use the MBA outside my home a lot. So that is why I do not buy an iMac.
I also do not want to go to the trouble of syncing a Macbook Air and an iMac.
I figured if I can use the hard drive on the MBA and then use the cinema display to show everything like my LCD screen that would be great.
How can I get around the problem of awkward placement on my desk?
Can I buy a keyboard and will that prevent the need to type using the MBA's keyboard?
I plan on replacing my old MBA with the new MBA that has two USB ports.
Will the separate keyboard and display fit into a USB hub? I need to keep one hub free on the MBAir for the USB ethernet.
Is it just a matter of plugging the cinema display and keyboard into the MBA and then just typing away, using the MBA's hard drive?
I do not know how this will work.
Thanks for any explanation.I figured if I can use the hard drive on the MBA and then use the cinema display to show everything like my LCD screen that would be great.
<http://support.apple.com/kb/ht3131>
Can I buy a keyboard and will that prevent the need to type using the MBA's keyboard?
Yes.
Will the separate keyboard and display fit into a USB hub? I need to keep one hub free on the MBAir for the USB ethernet.
There are two USB ports on the display. Use one for ethernet and one for the keyboard (a USB mouse can plug into the keyboard).
Is it just a matter of plugging the cinema display and keyboard into the MBA and then just typing away, using the MBA's hard drive?
Yes. Or you can use a wireless keyboard and mouse.
<http://store.apple.com/us/product/MC184LL/A?fnode=MTY1NDA1Mg&mco=MTMzNzg5MDM>
<http://store.apple.com/us/product/MB829LL/A?fnode=MTY1NDA1Mg&mco=MTMzNzY2NTE>
<http://store.apple.com/us/product/MC380LL/A?fnode=MTY1NDA1Mg&mco=MTg1ODE3MDE> -
ITunes/Music Home sharing does not work on my iPad Air
No matter what I do I cannot use Music.app on my iPad Air to play music from my iTunes Library with Home-Sharing switched on. The Library name correctly appears in the Music.app source list after the loading symbol takes an age to complete. When it appears to have connected to the Library on my Mac, contents of my Library are shown in the app but I cannot play anything. If I select an albumn and press Play the Music.app merely cycles rapidly through all the track titles of the Album and then stops. Nothing plays. I've tried dozens of times to get this to work, even rebuilding my iTunes Library. Nothing seems to cure the problem. I can connect and play via Plex which is just plain daft seeing Apple designed all the software/hardware but they, themselves, cannot correctly code for this basic functionality.
Also, not all Album cover artwork is displayed correctly.
It seems many of the things I bought the iPad for are non-functional and the tablet is virtually useless. I can't beleive Apple would produce software and hardware which is specifically made to work harmoniously but obviously doesn't.
Any help, here, please?
I'm also having problems with Bluetooth connecting to my Mac Pro (2008)... Namly, it will not.Understanding Home Sharing
http://support.apple.com/kb/ht3819
Setup Home Sharing on iPad
http://support.apple.com/kb/ht4557
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972 -
Movies from iMac 27 do not show up on macbook air
I have 24 home-made movie that show up on my main computer, iMac 27, two iPads and and iPhone5. However, I am baffled how to get the same movies to show up on my Macbook Air. I've tried Sharing the Library, turning Sharing off and on on both compueters, and many other obvious possibilities. This is baffling me. Has anyone else had the same situation and a solution to go with it?
Thank you,
Steve RoeslerHello, Steve.
Thank you for visiting Apple Support Communities.
I would need a little more information on this issue to provide a better answer. Are these movies in your iTunes library? If not see the steps in the first article below. Some imported movies do show as Home Videos when imported. If these are in your iTunes library, see the troubleshooting steps in the second article below.
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Cheers,
Jason H. -
Mid 2013 macbook air keyboard/trackpad stop responding
I have a mid-2013 13" Macbook Air - 512GB SSD, 8GB RAM - 1.7Ghz i7
I spend a good deal of time working at my home, where I have two external monitors (one via USB, one via the thunderbolt port) and a bluetooth wireless mouse and keyboard. Things are great.
I also go on the road, and when I do, I simply unplug my monitors, close the lid, and go.
Lately, I've had some very odd behavior happen which acts a lot like what is described in the latest 13" Macbook Pro Retina EFI fix: http://www.macrumors.com/2013/11/07/apple-releases-fix-for-13-inch-retina-macboo k-pro-keyboardtrackpad-issues/
Here's what happens....when I'm traveling and away from my bluetooth keyboard/mouse, I will open up my MBA and the trackpad and internal keyboard are unresponsive. I can press the power button and get it to turn off...power it back on and am able to use the keyboard to control various boot options (diagnostics, single-user, safe-mode, recovery model, etc). Booting up full, however, the issue will still exist. Looking at the console log, when this is happening, there are a ton (about 4000 every minute) of the following :
11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::doSPITransfer CRC from device was invalid
11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::InterruptOccurred Failed to transfer interrupt data with Err (0xe00002eb)
Eventually, something happens and things start to work -- I will generally see the following in the console log when it starts working:
11/1/13 7:45:27.000 PM kernel[0]: Apple Internal Keyboard / Trackpad::start Start Succeeded
If I let the machine sit at the unlock screen, eventually a dialog comes up and says "unable to find external bluetooth keyboard/mouse..." It says it will continue to search and will pair with one eventually....it's the same message I would get from my mac mini if it couldn't find the bluetooth keyboard (and has no internal/hardwired keyboard).
When it is happening, I can use "cmd-r" to boot into recovery mode and recovery mode will complain about not having a mouse/trackpad - yet the keyboard seems to work to control what happens at boot time.
I called Apple and got sent to the apple store with a "it sounds like a faulty logic board or a connection that needs soldering". The Apple Store "genius" didn't quite think that was the case and has instead suggested I re-install the operating system. I'm non-plussed by both suggestions. This has happened both before and after Mavericks...
On one of my latest trips, I had a case where I took my laptop out on the plane to try to use it...only to have this issue occur. I landed, got to the hotel, tried again and everything worked fine. Went to dinner - leaving my laptop on the desk plugged in - only to come back to have the keyboard unresponsive.... I've now resorted to traveling with my bluetooth keyboard and mouse "just in case".
Any ideas/thoughts?Mv2400
I will open up my MBA and the trackpad and internal keyboard are unresponsive.
Do four things to test for fault on this,
reset SMC ,
reset NVRAM,
uncheck "put hard disks to sleep"
and UNPAIR both your bluetooth mouse and keyboard from this Mac that you are using with it currently.
yes, the notion that your logic board is at fault is extremely unlikely, additionally (though far more likely) that your Mavericks OS is corrupt.
RESET SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
RESET NVRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Lastly, go into SYS PREFERENCES > ENERGY > uncheck "Put hard disks to sleep when possible" in both tabs.
Let your Mac go into sleep or close the lid for a few mins. and reopen and verify that your trackpad and mouse are fine. They should be after this,.........
If not contact Apple for full in shop diagnostic, theyll run a hardware test (unlikely causation) and reinstall the OS, then retest and LASTLY replace the logic board (very unlikely). -
Mid 2011 Macbook Air Painfully slow.
Mid 2011 Macbook Air Painfully slow.
Hey everyone. I am writing about my 13 inch Mid 2011 Macbook Air.
Recently it has been extremely slow and on occasion has not started up.
I have reset the PRAM and SMC already, yet it is still very slow. I have a couple theories about what might have caused it, are they plausible?
Theory 1: It’s a software problem. I tried to upgrade to 10.8.2 but halfway through the upgrade the computer restarted and somehow I was still on 10.8.1. For fear of a big issue happening I didn’t try to upgrade again. Perhaps it is a flaw in Apple’s software update?
The important thing to note about this update is that I tried to install 10.8.2 around a month or two weeks BEFORE I started having problems. So if these issues were due to 10.8.2’s failed update then it certainly was a delayed reaction.
I would of course like to update to 10.8.2 BUT as my computer is acting EXTREMELY slow and having trouble turning on occasionally I am worried the software update will completely brick the machine. Is that possible? Should I actually finish through with the software update?
Theory 2: It was an electricity problem.
The computer died when I was sitting at a café plugged into their wall sockets. A few days later when I came back to the same spot with my old macbook which is now being used in lieu of the Air it suddenly turned black for a little while. Sensing it might be an electricity surge or something with their system I unplugged the cable. I am not sure if that was paranoia though.
Can an electricity surge or a bad outlet fry a computer? Can it fry the ram so the computer is extremely slow? Does that theory hold any water?
Thanks for your help diagnosing this problem.
All the best.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
Maybe you are looking for
-
I am trying to access iCloud,I have had my ipad for over a year and did not use it,but now I have my I phone5 I find I can't do a lot with them together,so looking into this more I think it may be an iCloud issue,when I try to sign in I am told my ac
-
Font is too small on screen, although is correct in print
Have a client who works on a Mac and to be able to see writing on screen in e.g. email, I have to ensure it is something like size 20 to see it which is a pain as, when printing this size of font, it is huge. So far, the only way to see the text is
-
Please tell me how to get 11 .5.0 or higher
I need 11 .5.0 or higher to run a game but I don't know how to get 11 .5.0
-
Define a sort of static variable in a FlatFile Resource
This is the problem, i have a FlatFile Resource that calls a Process Rule (a Workflow). Every user that FlatFile Resource find with the Workflow it retrieves a list, so every time it wastes time because the list is always the same, i have to retrieve
-
The question about activity confirm
business scenario: 1,now there is an activity. when confirm, we hope the activity cost(work * hour) and other cost (for example: gas and other cost) is confirmed together. Please explain me all the steps to be required. Thanks in advance