AIR-AP1131AG-A-K9 Reload Reason: FAILED CRYPTO INIT.
Hi All,
I have a standalone AP of model AIR-AP1131AG-A-K9 and have changed the mode to LAP by using mannual archive command. However after changing the mode to LAP it gives below log and keep on booting.
Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
> I did found from below link that the reason is as mentioned in point number 9, however solution didnt worked.
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml
> I did downloaded CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe to upgrade but after executing this file nothing happens.
Kindly help me in understanding whats going wrong with my AP?
Here is the logs.
*Mar 1 00:00:06.644: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:07.644: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
ap>
*Mar 1 00:00:18.603: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:24.691: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG: lwapp_crypto_init_ssc_keys_and_certs no certs in the SSC Private File
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG:
*Mar 1 00:00:24.711: lwapp_crypto_init: PKI_StartSession failed
*Mar 1 00:00:24.729: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:24.729: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
One of the errors is saying that it can't find any SSC in the private file.
This yells me the AP doesn't have a certificate. Why you'll want ti do is reload an IOS image on the AP and then use the conversion tool to load the capwap image. By using the conversion tool, it wil execute some commands that create a SSC, a self signed certificate. Then you load the SSC on the WLC and the AP should be able to boot up and join.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Sent from Cisco Technical Support iPhone App
Similar Messages
-
1200AP Reload Reason: FAILED CRYPTO INIT.
The AP restarts every 30 seconds...just like the documentation says it will!! This AP will not have full capability in LWAPP mode so I need to be able to get it to Autonomous mode but cannot get it from rebooting..... What is the process to get into a limited access mode to reload the proper security into flash and have it come up in autonomous mode??? Please let me know if you need more info...
if you want to return an ap to atonomous mode you will need to use the mode button:
http://www.cisco.com/en/US/docs/wireless/access_point/12.2_15_JA/configuration/guide/s15trb.html#wp1040300 -
1130AG not joining controller - FAILED CRYPTO INIT
I am trying to join my 1130AG-E-K9 AP to my 2016 WLC, but it is stuck in a boot loop and will not connect to the controller. The error I'm getting is:
*Mar 1 00:00:29.584: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:29.585: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init: could not start PKI session
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: Failed to initialize Crypto. Rebooting
*Mar 1 00:00:29.663: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295), size needed (29), error code (-1)
*Mar 1 00:00:29.663: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:29.664: %LWAPP-5-CHANGED: CAPWAP changed state to DOWNXmodem file system is available.
I found some details here: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml, but I'm not sure what it means that I have a 'SSC AP'. I am not local to this AP, though I do have a console connection to it-what do I need to do to get it working again? It just continually goes through this error and reboots every 30 seconds or so, so it's useless at the moment.
Thanks!While that did help me potentially debug the AP, it seems the AP can not/is not reaching the WLC. Debugs on the WLC show other APs talking to it, but the only signature I'm picking up on the WLC from this AP is:
*Aug 08 20:34:36.376: 00:13:5f:fb:b4:f0 Echo Request from 10.50.0.25:44194
*Aug 08 20:34:36.376: 00:13:5f:fb:b4:f0 Echo Response sent to 10.50.0.25:44194
And from the AP itself:
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:06.475: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event (contains, 1024 messages)
*Mar 1 00:00:08.523: %LINK-3-UPDOWN: Interface FastEthernet0, changed state up
*Mar 1 00:00:08.548: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.4(21a)JA2, RASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:17 by prod_rel_team
*Mar 1 00:00:09.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthet0, changed state to down
*Mar 1 00:00:17.310: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthet0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:20.591: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTRER
Writing out the event log to nvram...
*Mar 1 00:00:29.591: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTLER
*Mar 1 00:00:29.592: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no ce in the SSC Private File
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init: could not st PKI session
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: Failed to initialize Crypto. Roting
*Mar 1 00:00:29.666: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON led, because size left in ROMMON (4294967295), size needed (29), error code (
*Mar 1 00:00:29.667: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reloaeason: FAILED CRYPTO INIT.
*Mar 1 00:00:29.667: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
Is my only option at this point reverting back to a standalone image, then going back to a LW one?
Thanks again,
-Ryan -
How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?
You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Bridging AIR-AP1131AG with TP-Link
Hi Guys,
Today I want to build a wireless bridge using AIR-AP1131AG (running WLC) and TP-LINK wireless router.
The result is failed. May I know AIR-AP1131AG is support bridging the wireless connection with other vendor's access point or not?
In the TP-Link I already match its SSID, Channel and put the mac-address of the AIR-AP1131AG.
In the WLC I already see too TP-LINK mac-address is already become a client.
So what's the problem guys?
Thanks GuysWell bridging isn't supported when using a wlc, only workgroup bridge. So what your trying to accomplish will not work. You would have to convert the 1131 to autonomous, but you would need another Cisco device configured as a bridge on the other end. Or else you can leave the 1131 on the wlc and get a device that functions as a workgroup bridge or Ethernet converter. I have used the Buffalo Ethernet converters and the work just fine. You can use most of the the Cisco APs starting with the 1131 as WGBs also.
Sent from Cisco Technical Support iPhone App -
AIR-AP1131AG-E-K9 have been converted to LW how do I convert it back to Auto?
Hi,
One of my clients has a new WiFi solution and he has given me his old AIR AP1131AG-E-K9 to my LAB. The problem is that access-points have been converted to LW and the customer has thrown out the controller.
I do not know the enable password, how can these APs be reset to their default setting?Resetting to Default Settings Using the CLI
Caution You should never delete any of the system files prior to resetting defaults or reloading software.
If you want to reset the access point to its default settings and a static IP address, use the write erase or erase /all nvram command. If you want to erase everything including the static IP address, in addition to the above commands, use the erase and erase boot static-ipaddr static-ipmask command.
From the privileged EXEC mode, you can reset the access point/bridge configuration to factory default values using the CLI by following these steps:
Step 1 Enter erase nvram: to erase all NVRAM files including the startup configuration.
Note The erase nvram command does not erase a static IP address.
Step 2 Follow the step below to erase a static IP address and subnet mask. Otherwise, go to step 3.
a. Enter write default-config.
Step 3 Enter Y when the following CLI message displays: Erasing the nvram filesystem will remove all configuration files! Continue? [confirm].
Step 4 Enter reload when the following CLI message displays: Erase of nvram: complete. This command reloads the operating system.
Step 5 Enter Y when the following CLI message displays: Proceed with reload? [confirm].
Caution Do not interrupt the boot process to avoid damaging the configuration file. Wait until the access point/bridge Install Mode LED begins to blink green before continuing with CLI configuration changes. You can also see the following CLI message when the load process has finished: Line protocal on Interface Dot11Radio0, changed state to up.
Step 6 After the access point/bridge reboots, you can reconfigure the access point by using the Web-browser interface if you previously assigned a static IP address, or the CLI if you did not.
The access point is configured with the factory default values including the IP address (set to receive an IP address using DHCP). To obtain the access point/bridge's new IP address, you can use the show interface bvi1 CLI command.
The 1300 series access point/bridge assumes a radio network role of a root access point. To configure it as a bridge, you must manually place it in install mode in order to align the antennas and establish a link. To establish the link you must have two access point/bridges configured in the install mode. In the install mode, one access point/bridge must be configured as a root bridge and the other a non-root bridge. To facilitate the configuration, an automatic option is available when the access point/bridge is in the install mode. After the wireless link is established and the bridge antennas are aligned, you take both access point/bridges out of install mode and place them on your LAN as root and non-root bridges.
Note "Resetting the Device to Default Settings" sectionIf xon/xoff flow control does not work, use no flow control.
Step 7 When connected, press enter or type en to access the command prompt. Pressing enter takes you to the user exec mode. entering en prompts you for a password, then takes you to the privileged exec mode. The default password is Cisco and is case-sensitive.
Note If xon/xoff flow control does not work, use no flow control.
Step 8 When connected, press enter or type en to access the command prompt. Pressing enter takes you to the user exec mode. Entering en prompts you for a password, then takes you to the privileged exec mode. The default password is Cisco and is case-sensitive.
Note When your configuration changes are completed, you must remove the serial cable from the access point. -
[SOLVED] luksOpen device-mapper reload ioctl failed invalid argument
Hello,
I don't know what things I have problem.
Have You any idea?
What I need to do?
$ sudo cryptsetup luksOpen /dev/sr0 dvd
Jelszó:
Enter passphrase for /dev/sr0:
device-mapper: reload ioctl failed: invalid argument
$ sudo cryptsetup luksDump /dev/sr0
LUKS header information for /dev/sr0
Version: 1
Cipher name: aes
Cipher mode: cbc-essiv:sha256
Hash spec: sha1
Payload offset: 2056
MK bits: 256
MK digest: b5 3e d0 e4 d4 e0 ed 52 25 68 88 af 74 01 90 a7 a7 e2 50 19
MK salt: 74 8e 97 56 48 b8 ad eb a9 dc 18 85 e3 a2 e9 03
7a 87 0d df d9 e3 04 e1 87 6e ce c8 3a f5 1d 6d
MK iterations: 15375
UUID: 1ef0225c-328f-4531-9d76-7259dd381960
$ cat /proc/crypto
name : sha256
driver : sha256-generic
module : sha256_generic
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 32
name : sha224
driver : sha224-generic
module : sha256_generic
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 28
name : cbc(aes)
driver : cbc(aes-asm)
module : kernel
priority : 200
refcnt : 1
selftest : passed
type : givcipher
async : no
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : eseqiv
name : cbc(aes)
driver : cbc(aes-asm)
module : cbc
priority : 200
refcnt : 1
selftest : passed
type : blkcipher
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
name : aes
driver : aes-asm
module : aes_i586
priority : 200
refcnt : 1
selftest : passed
type : cipher
blocksize : 16
min keysize : 16
max keysize : 32
name : aes
driver : aes-generic
module : aes_generic
priority : 100
refcnt : 1
selftest : passed
type : cipher
blocksize : 16
min keysize : 16
max keysize : 32
name : stdrng
driver : krng
module : kernel
priority : 200
refcnt : 2
selftest : passed
type : rng
seedsize : 0
Last edited by gyurman (2011-12-03 11:54:18)Have you tried:
sudo cryptsetup -r luksOpen /dev/sr0 dvd -
Square Footage Range for AIR-AP1131AG ?
Can someone tell me the indoor square footage range for a Cisco AIR-AP1131AG ? I have someone that is purchasing this unit and wants to cover 3,500 square feet with just one access point. Thanks.
The range should be fine for that area of coverage. The 1131AG is comparable to the Cisco 4941 antenna, which Cisco says has a range of 300ft at 6Mbps. You'll need to keep several other things in mind, though.
1. Client Capacity - the 1131AG can't support much more than 20 or 25 clients.
2. RF Shadows - An open environment is one thing, but if you have anything in that room then there will be large coverage holes if only a single AP is used. This is especially true with anything metallic.
3. Redundancy - If any wireless traffic is mission-critical, you should probably install a second AP in case the first one fails.
In the end, I would recommend at least one more AP, but purchasing one and trying it out isn't a terrible idea if money is a concern.
Jeff -
A recent download of an iTunes update, for some unknown reason, failed on my computer. Since then I get a system error message everytime I log on telling me that the program cannot be opened because 'MSVCR80.d11' is missing from my computer. When I try to open iTunes I get an 'error 7 (Windows error 126)' message and am advised to reinstall iTunes. However, when I attempt to do this, it downloads the programme and gets as far as installation, at which point I get yet another message: this time 'Service Apple Mobile Device failed to start'.
I am at a loss to know what to try next and would appreciate any assistance. I'm also concerned that, in the process of reinstalling iTunes, I am going to lose all the music I have collected over the years.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602) -
Problem converting air-ap1131ag-a-k9 to Lwapp
i have a person on my team who converted some autonomoous air-ap1131ag-a-k9 to lwapp. I don't think they did it right.
what they did is , booted the ap ( at this point it was running in autonomous mode), set the ip to 192.168.1.200 and their laptop to 192.168.1.100 connected the laptop directly to the AP. (I have found out that these AP's were old AP's that previously had configs on them, ( static ips, a whole config) they came from another building , they were the ones that other lwapps replaced.)
they then went to the web gui of the AP , went to software upgrade and loaded the lwapp recovery image on the ap (c1130-rcvk9w8-tar.124-10b.JA3.tar). the software loaded fine, and converted the AP . and thats all they did
(I had mentioned that we should use the upgrade tool, but they didn't listen)
the aps got mounted , on the ceiling in the hospital, but when they went to turn them on, they didnt show up right on the controller , they kept joining and unjoining..
i think there is a problem with the SSC, i remember, something like the time had to be the same on the ap and on the WLC.
anyways, these could be older AP's before 2005 ( unknown to me) which would mean they dont hav MIC's and have SSC. and the ap is refusing them is my thought.
the WLC is setup to accept self signed certs.
anyways...
these aps are now mounted on the ceilings , and when you do a show cdp nei, it has an ip address from when it was an autonomous ap.
Also, what is the best process you have found to convert Old autonomous 1131 AP's to lightweight mode?
thanks
the controller is running 4.2.176 WLC code. i currently don't have Access to WCS or a spare controller to use with the upgrade utility.
the controller is a 4404-100i went to the wlc and issued the command
debug lwapp events enable
i got the following output
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Received LWAPP JOIN REQUEST from AP 00:11:20:1a:07:a9 to 06:0a:10:10:00:00 on port '29'
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 AP AP0011.201a.07a9: txNonce 00:00:00:00:00:00 rxNonce 00:00:00:00:00:00
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 LWAPP Join Request MTU path from AP 00:11:20:1a:07:a9 is 1500, remote debug mode is 0
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Processing Radius Response: AP Authorization failure for 00:11:20:1a:07:a9
Sat Jun 13 12:41:54 2009: 00:1e:f7:ed:e8:aa Did not receive hearbeat reply from AP 00:1e:f7:ed:e8:aa
Sat Jun 13 12:41:54 2009: DTL Deleting AP 5 - 0.0.0.0
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Received LWAPP ECHO_REQUEST from AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Successful transmission of LWAPP Echo-Response to AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:21:55:c2:06:20 Received LWAPP DISCOVERY REQUEST from AP 00:21:55:c2:06:20 to ff:ff:ff:ff:ff:ff on port '29'
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP STATISTICS_INFO from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Statistics Info Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:58 2009: 00:1d:70:f4:3e:50 Received LWAPP DISCOVERY REQUEST from AP 00:1d:70:f4:3e:50 to ff:ff:ff:ff:ff:ff on port '29'
can someone help me decipher what it means, i think i need to debug to get the sha key.
there are about 14 new ap's. and they all have problems.
thanks -
New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!! -
Can't install dreamweaver on new mac air osx Keep getting message Update failed This patch is not applicable to you.
Dreamweaver download prob which version of Dreamweaver are you trying to install? What version of Mac OS do you have installed on your new MacBook Air? Finally what specific update is failing?
-
AIR-AP1131AG-I-K9 support AES 256 bit ?
hi,
I have several AP devices:
Product/Model Number: AIR-AP1131AG-I-K9
System Software Filename: c1130-k9w7-tar.124-3g.JA
System Software Version: 12.4(3g)JA
Bootloader Version: 12.3(8)JEA
i need to know if AES 256 bit is supported by this devices and if the current software need to upgrade for that.
Regards,HI Ben,
As per my knowledge this Software dont support 256 bit key size.
Here is the link:http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_3g_JA/configuration/guide/ios1243gjaconfigguide/s43wep.html
another version: 12.3(8)JA supports 256 bit key size to protect data traffic,
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-3_8_JA/configuration/guide/1238jasc/s38wep.html
Regards
Don't forget to rate helpful posts -
I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
*ERROR* Failed m_WaveList- Init(). hr=0x80040154 with Cisco TSP
Cisco TSP 8.6(2.2).
I am trying to install Cisco TSP on a Windows 7 32bit workstation, but I am having issues. We are using a management program called "Connectwise". My boss wants to be able to dial a customer within the "Connectwise" program to log calls. Our other office has a Shortel phone system and Shortel's TSP program works fine. I've installed Cisco TSP, configured CTI ports, configured a CTI routepoint, enabled the user for CTI, and associated the user with the CTI ports/route point. When I try to dial a number within Connectwise, nothing happens. Within the Cisco TSP logs these errors are logged:
16:23:36.418 HDR|05/07/2012 CiscoTSP001.tsp,Error
16:23:36.418 | CSelsiusTSPWaveList::Init() *ERROR* Failed to get ISelsiusNTWaveCtl interface.
16:23:36.419 | SelsiusTSP::InitializeComObjects() *ERROR* Failed m_WaveList->Init(). hr=0x80040154
17:02:12.513 | CSelsiusTSPLink::getMessage() *ERROR* Receive() failed with error 0.
I have tried to use the Windows "Dialer" program to test as well, but receive this error:
One or more telephone device drivers are incompatible with TAPI.DLL. Install an updated version.
I have installed Cisco TSP with both the WAVE driver and the new MEDIA driver. I receive the same error with either driver. I've also tried this on multiple workstations, but get the same error.
HelpI engaged TAC and the engineer pinpointed following error from the CTI Logs:
Login User Id:platju Reason code.:-1932787595
This is the Cisco documentation on this error code:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/constantfieldvalues.html
The engineer suspected LDAP server is not able to authenticate CTI based connections correctly although HTTP based connections (CCMUSER Web Page access) or JTAPI based connections (UCCX) are working fine.
We created an application user in CUCM and the Dialer.exe showed Cisco Line as expected. The engineer did assign all CTI roles (Not only Standard CTI Enabled) except Secure CTI ones. The End User didn't work no matter what we try.
As of now, I've asked the AD team to look at their side or engage Microsoft to debug it at their end. Hopefull that'll resolve the issue.
Maybe you are looking for
-
I accidently deleted the file folder audio books from the library and from teh device section in iTunes how to replace
-
ABAP Code in Start Routine for restricing the data records from ODS1 - ODS2
Hi I need small ABAP Code in Start Routine Of Update rules Of ODS . Im in BW 3.5 . I have records like below in first layer ODS and i want to restrict some records while going to second layer ODS .. ODS1 :- DocNO EventType Date 123 001
-
Duplicates in iTunes: Should I delete the Purchased AAC Audio file?
I show two different file types and sometimes 3. Sometimes it will say MP3, which I assume is one that came from a CD or something. If I need to delete duplicates, should I delete the "Purchased AAC Audio file" or delete the "AAC Audio File". Wha
-
In FCP10, when looking at a frame of video, I simply want a quick still frame captured. What is the most basic method to do this? Thanks.
-
We've got an Oracle 9i Rel 2 database server with a database that we'd like to synch with a laptop application using .Net and Windows Forms. What needs to be installed where? And, how do I get an initial copy of the database from the server to my 9i