Air app install fail in IE with Badge Installer Error # 2032

Much has been written about this problem, and the most quoted solutions are
Ensure the appurl FlashVar is not a relative url but fully qualified http://domain.com/app.air
Uninstall and reinstall Air
Empty browser's cache
None of these have solved my issue and I still have a reproducible bug.
I have set up a badge installer at http://tx.flamjam.com/mms/ which attempts to install appurl=http:/tx.flamjam.com/mms/MMSReview.air
This works beautifully in OS X but fails in Windows with the error window,
Sorry, an error has occurred.
The application could not be installed. Try installing it again. If the problem persists, contact the application author.
Error# 2032
I've tested IE and Chrome, both updated to the most recent versions.
When Air is not installed I get a slightly different error message, with no error number.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
With Air installed, if I instead visit the appurl directly in the browser — http:/tx.flamjam.com/mms/MMSReview.air — the file downloads and installs without problem.
To the best of my knowledge, the error is a generic stream error which essentially means that the appurl could not be found. To demonstrate this, simply use a fictitous appurl and now the same error can be seen on OS X as well. This implies that something is malforming the appurl withing the badge, but I have modified the status display text of the badge to display the appurl parsed from the LoaderInfo object containing FlashVars payload and can confirm that the appurl appears to be consistent between OS X and Win.
Log file in next post.
I'll continue digging for a solution, and post my findings here, but would value other's input on this subject greatly.

An interesting development.
When I monitor my network traffic using ServiceCapture I can see that no attempt is made to connect to the appurl, with the install failing instantly without even attempting to connect to the appurl.
ServiceCapture on OS X confirms the attempt to connect to the appurl even if the url is deliberately fictitous resulting in a 404 response.
The badge begins the installation process using the installApplication method of the following file
http://airdownload.adobe.com/air/browserapi/air.swf
which the badge loads on startup.
It would appear to me that the installation problem is failing inside that loaded swf's code, but I'm at a loss as to how to debug that.

Similar Messages

Photoshop cs4 install fails on Vista with registry access error 1406

I've been trying to install Adobe Photoshop CS4 on my Vista for a couple of days now. It grinds for a minute or two then tells me "Installation of the following components has failed: Adobe Drive CS4, Adobe Photoshop CS4" when I cancel the install and click the "More Information" button, I see this:
Adobe CSI CS4
Error:
Error 1603. Error 1406.Could not write value AdobeCS4ServiceManager to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
When I go into regedit, I have no problem creating a string value in the indicated key.
Here are some of the things I've tried:
1) run setup as administrator (even tho I have UAC turned off)
2) run setup in WinXP SP2 compatibility mode
3) use the Adobe Support Advisor to track down the error in their knowledge base and followed steps to apply permissions to descendents of the indicated tree
Done lots of googling plus searching of the experts-eschange knowledge base.

Choose Custom during install, deselect Version Cue, Adobe Drive and Acrobat.com. The CSI Service is related to that.
Mylenium

OSD SCCM 2012 R2: 0x80004005: app install failed

Hi,
I have this application in a simple task sequence which fails to install (error 0x80004005).
The application itself installs correctly in a windows session. It has "Allow this application to be installad from the Install Application task sequene ..." enabled.
Also when I run the installation manually in the tasksequence (next to the error I open a dosbox -F8- and map the source, run the exact command of the application "msiexec ...") this install correctly.
Error in smsts.log =Installation job completed with exit code 0x00000000   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
Execution status received: (Application download failed )   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
App install failed.   InstallApplication    26/02/2014 12:50:09   2320 (0x0910
Not sure why it tries to download and why it fails. Network access account is ok.
Please advise.
J.
Jan Hoedt

Execution status received: (Application download failed )   InstallApplication   26/02/2014 12:50:09   2320 (0x0910)
I totally missed that line when I read your posting first. Check CAS.log, LocationServices.log and ContentTransferManager.log.
Torsten Meringer | http://www.mssccmfaq.de

0x80004005: app install failed - OSD SCCM 2012 R2 - randomly

Hi,
I have visited many forums with this error before posting.
Problem : During TS New computer OSD, app failed to install randomly on all model Win 7 x86 or x64.
Information :
App concerned : Adobe flash, office, chrome...
Domain integration : OK
App installation tested across software center : OK
smsts.log error :
Policy Evaluation failed, hr=0x80004005
Install application action failed: 'Adobe Shockwave Player '. Error Code 0x80004005 InstallApplication
LocationServices.log error :
Policy prevents failover to WINS for lookup
Successfully sent location services HTTP failure message.
Error sending HEAD request. HTTP code 401, status 'Unauthorized'
Client is not assigned to a site. Cannot get security settings.
Client is not assigned to a site. Cannot get site signing cert.
An idea ?

Hi,
I create another topic and my problem (App install during OSD) is now solved yes:
http://social.technet.microsoft.com/Forums/en-US/bb10bfc3-f5ec-46a6-9535-ea299266795c/strange-problem-app-install-failed-randomly-osd-sccm-2012-r2?forum=configmanagerosd#f54d0af1-2658-49ee-a57a-1ec9e2b09a3e
You can Check "Continue on error" inside "Options" Tab on your TS. Even if App install fail At least the rest ends well...

Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

SCVMM Installation Failed: vmmServer.msi failed with Windows Installer error 1603.

Error seen when attempting to install Microsoft System Center 2012 R2 Virtual Machine Manager
Installing D:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
Searched the log file for 1603 errors -
CustomAction EnableWsmanCredSSP returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:20) [02:00:47:180]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (B8:20) [02:00:47:180]: Machine policy value 'DisableRollback' is 0
Action ended 2:00:47: EnableWsmanCredSSP. Return value 3.
SI (s) (B8:20) [02:00:47:228]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Server (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
I've tried disabling my Firewall and troubleshooting the Enable-WSManCredSSP command-let however nothing has worked and I'm quite stuck.
Any help would be appreciated.

I had the same problem in my environment.
Here are the steps how i did solve this issue
Since VMM 2012 R2 Requires ADK 8.1 and this requires SQL 2012 Express.
In order SQL Server 2012 to be installed successfully .Net Frame Work 3.5 feature on Windows Server has to be enabled first, in this case it is not not being installed by ADK Installation wizard as a result SQL service fails to start, which results on VMM
installation to fail.
Please try to enable .Net Frame Work 3.5 feature on Windows Server 2012 R2 before you install ADK 8.1

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          24/12/2009 09:08:20
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
    <EventRecordID>36</EventRecordID>
    <Correlation />
    <Execution ProcessID="1944" ThreadID="1948" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>George-XXL</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">
    </Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>

Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong!

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035

Windows Server 2008 R2 Standard.
I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.
Sourece: Kernel-EventTracing
EventID: 2
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
- System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID 2
Version 0
Level 2
Task 2
Opcode 12
Keywords 0x8000000000000010
- TimeCreated
[ SystemTime] 2010-12-01T11:17:19.937490400Z
EventRecordID 17
Correlation
- Execution
[ ProcessID] 3472
[ ThreadID] 3100
Channel Microsoft-Windows-Kernel-EventTracing/Admin
Computer LODGER.aqa.com.ru
- Security
[ UserID] S-1-5-21-1644491937-706699826-1417001333-3605
- EventData
SessionName WbadminUIInBuiltTracing
FileName
ErrorCode 3221225525
LoggingMode 2
What causes the error? What do I need to do to avoid it?

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Error: "Failed to install" | Creative Cloud Desktop

AIR App Update fails with ApplicationUpdater (IOErrorEvent 2032)

I hope somebody can help me with this issue as I'm completely clueless of what could be the problem...
I've integrated the AIR ApplicationUpdater into my app and doing update tests but they fail if I download the update for my app and then press "Install" so that the app exits and tries to install the update. there I get the following message:
Sorry, an error has occured.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
If I postpone the update install until the app is restarted, all works fine. This happens on Windows 7 as well as on Mac OSX. And I tried it too with uninstalling both AIR and my app and re-install it all freshly but this didn't help.
Here's part of the install log I'm getting:
[2011-05-31:02:51:30] Application Installer begin with version 2.6.0.19140 on Windows 7 x86
[2011-05-31:02:51:30] Commandline is: -update "c:\program files (x86)\test\test application\test application.exe" "C:\Users\user\AppData\Roaming\testappid\Local Store\#ApplicationUpdater\update.air" 1.0.1
[2011-05-31:02:51:30] Installed runtime (2.6.0.19140) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-05-31:02:51:30] Installed app (testappid) located at c:\program files (x86)\test\test application\test application.exe
[2011-05-31:02:51:30] Unpackaging file:///C:/Users/user/AppData/Roaming/testappid/Local%20Store/%23ApplicationUpdater/updat e.air to C:\Users\user\AppData\Local\Temp\flaD894.tmp
[2011-05-31:02:51:30] Got an unexpected fatal error while unpackaging: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032" errorID=2032]
[2011-05-31:02:51:54] Launching subprocess with commandline c:\program files (x86)\test\test application\test application.exe
[2011-05-31:02:51:54] Application Installer end with exit code 7
... Anyone have any clue what could be the source of the trouble? It's very important for me that this all works flawless.

I am having this same issue. Have you by chance found a reason for this?

Air app install fail in IE with Badge Installer Error # 2032

Similar Messages

Maybe you are looking for