AIR application not appearing in GotoMeeting Session

I was demo-ing an AIR application last Friday, but the group
that was on the GotoMeeting session was not a able to see the app.
That particular desktop window was not being transmitted. I've also
noticed a similar issue when trying to screen capture an AIR window
locally on my laptop which is running Windows XP. It's as if that
window does not exist and there is nothing to capture. Known bug?
Thanks,
-Frank

Hi Naveen,
It will be most probably because of Security not defined for this new application in the "Member Access profile". Please check.
Thanks & Regards
Arun Kumar S

Similar Messages

  • Air application (not for mobile) ?

    Hi
    How do we proceed to create a Air application (not for mobile) that works with Zend Server? "Flex and Php project" creates a web based application, isn't it?
    Thanks

    I have the same question.
    Is possible to debug the PHP side of an AIR application?
    Because for Web and Mobile applications there is an extra option for debugging ("Web (PHP) Application" and "Mobile (PHP) Application") but there isn't any option like that in Desktop Application.
    If is not possible with Flash Builder, does somebody know a workaround for debugging PHP in AIR apps?

  • AIR application not installed

    Hi all,
    My AIR application not installed.
    AIR application installer shows window with 'Getting ready to install..." and window closed and nothing happens. What I'm doing wrong and where I can see an 'installation log' to obtain the root reason of AIR installation problems?
    My env: Fedora 12 x64, AIR and AIR SDK just downloaded and installed from site. All AIR SDK applications (adl and adt) works well.
    Sergey

    Thank you for your reply!
    airappinstaller throws SIGSEGV signal.
    I trace it in gdb and see that libxml2::xmlHasProp throws this signal because it receive an invalid node pointer from libadobecertstore.so.
    So I can't find or obtain debug symbols for adobeair-1.5.3-9130.i386 and I don't know what I should do to fix a problem...

  • The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

    The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

    To make sure that all required media is in the library contain the project you need to "Consolidate media"  see:  http://help.apple.com/imovie/mac/10.0/#mov882dee351
    You can then copy the library to your laptop with the Finder and open it with the same version of iMovie.  The last phrase is important since Apple has made changes in the project format several times even between minor updates of iMovie 10.  Earlier versions may not be able to read the library and later versions (not possible in this case) may cause the project to be updated so that it is no longer readable by the desktop version.   iMovie on the laptop will not at first find the copied library - you will have either to double click on it or File - Open library - Other and navigate to its location.
    Geoff.

  • Deployed Application Not appearing in Task Pane

    I have deployed an application, have mapped all the required Roles to Participants...post successfull deployment, when i am loggin into BPM workspace,Application doesnt appear.However Application Roles are all getting displayed into Admin Console of BPM.

    Hi Durgadas
    1. You mean to say, on left side you do not see a link for your application to initiate a task. Am I right ? If so, first check if you have some Users added to that first Initiator Role. If you deployed your app one time from JDev at that time only all the participants you add for that role will be stored in the db. Any later redeployments with more participants will not be reflected. This is part of design of bpm itself. So from BPM Workspace, login as admin. From Adminstrator link, add the users to that Role and see if that helps. If you added particpants in the JDeveloper IDE itself, they may not be reflected, even though you see them listed in admin console. So better delete existing participants or add some new participants and see if that works.
    2. I hope the first user task, that submits the task has actions like Submit and it should be Initiator type user task. When you edit the user task and add a human task, at that time, select from drop down as Initiator with only one Action like Submit.
    3. Restarting the server helps sometimes. But this may not be the root cause for your issue. Everytime you add a new participant to initiator role, we cannot expect to restart the soa servers. Add a new user from bpm admin console and thats all we need.
    Thanks
    Ravi Jegga

  • Developed application not appearing in system

    Hi,
    Developed and deployed an application throgh NWDI ,but its not appeared in the respective portal system.
    Note: able to see the application in CBS(NWDI)
    what are all to be crossverified.
    Thanks a ton

    what's the application?
    if you are deploying your application from nwdi, you can check the deployment log

  • Application not appearing in Application set

    Hi Team,
    I am trying to execute legal consolidation using particular application set but my legal application alone not appearing initailly when I caopy from other Appset it got appeared.
    I checked in connection summary following message it is displaying
    Internal OLAP server = SAP-CPMVM
        Internal Web server  = SAP-CPMVM
        Internal Report server = SAP-CPMVM
        External OLAP server = SAP-CPMVM
        External Web server  = SAP-CPMVM
        External Report server  = SAP-CPMVM
        BPU OLAP server =
        BPU Web server  =
        External BPU Web server  =
         FINANCE - Financial Application
         LRATE - Legal Rate App
         OWNERSHIP - Legal Ownership
         RATE - Currency Rates
    In the above my legal application "LegalApp" is missing under External BPU webserver.
    How to resolve above issue.

    Hi Naveen,
    It will be most probably because of Security not defined for this new application in the "Member Access profile". Please check.
    Thanks & Regards
    Arun Kumar S

  • Adobe Air Applications Not launching. Flash Builder 4.5.1

    I had this issue before where only flash based applications would launch but not adobe air. The issue is when you click run on adobe air, in the task manager on windows 7, 64 bit you get: Adobe Air Debug Launcher. Killing that gives me: If the program is already running, close it before attempting to run.
    The program never launches hence why you have to kill it in the task manager.
    I tried cleaning out the PreloadSWF entry in the mmc.cfg file. This does nothing to help the cause.
    Ideas?

    Please read the OP on the stale pale loader. I already took out the line in mm.cfg and I set vsible to true (never had to before on any air application Oo)
    Tests:
    The setting to visible to true though worked..... (again with never had to set that before)

  • Air application not behaving well on opening outlook

    Hi,
    I've designed an air application, in javascript in aptana studio,
    I need my application to talk to outlook.
    However, on opening outlook from my air application, the images in my application are not visible after closing outlook.
    Could this possibly be an error in programming or ..??
    Any help would be greatly appreciated.

    Hi
    Yes, tested this and it doesn't work properly. As you said, Spaces has been involved in each 10.5.x update and I am sure there will be more changes in 10.5.5.
    Regards

  • .AIR application not associated on Android?

    Hi folks, I have a feeling this is a real newbie question so bear with me.  I'm trying to install/open an AIR application on my tablet, a Toshiba Thrive that runs Android 3.0.  I've installed Adobe AIR, but the .air file installer package isn't associated with AIR (or any program at all) so I can't open it.  I'm thinking the application had been developed for Windows and that has something to do with it, but wanted to ask around first.  If there's more information needed let me know.

    Hello,
    You are correct, the .air installer is for desktops.  For Android, you'd need a .apk installer, though in most cases you'll receive the application from the market place.  I'd recommend reaching out to the developer and ask if they have an Android application.
    Thanks,
    Chris

  • IPad Air does not appear online when using "Find my Phone"

    Curious why my iPad Air appears "offline" in the Find my Phone app when it is in sleep mode.  All of my other devices (iPhone 5 & iPhone 4) both appear online (and on the map) even though they are sleeping. 
    All devices are running ios7 and are connected to the same wifi network.

    Hey there MntnBikeCT,
    It sounds like you have the iPad Air setup with Find my iPhone but you are not able to locate with the app on a different device, but other devices work just fine. I suggest these steps from the article named:
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    http://support.apple.com/kb/TS4006
    "No location available," "Offline," or "Location Services Off" alerts
    This can occur if:
    The date on your device is incorrect. Choose Settings > General > Date & Time to check and set the date.
    Your iOS device is currently off or not connected to a data network (Edge, 3 or 4G, or Wi-Fi). Wait a few minutes and try again.
    Your iPad (Wi-Fi only), iPod Touch, or Mac is currently off or not connected to a Wi-Fi network.
    Location Services is not enabled on your iPhone, iPad, or iPod Touch (Settings > Privacy) or on your Mac (Date & Time) preferences. Learn more about Location Services on your Mac:
    OS X Mountain Lion or later
    OS X Lion
    You are located in a country where Apple does not offer this feature. This feature may not be available in all countries due to technical limitations or local law.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Applications Not Appearing in Workspace (9.3.1)

    Hello all,
    We recently upgraded to system 9.3.1 and intermittently users are not seeing the applications when logging into Workspace.
    Example: USER A logs in to Workspace, is able to perform all necessary duties by logging on to the application for days, sometimes weeks at a time. Suddenly, USER A logs in, and Workspace appears as if there are no applications registered at all. The next day USER A logs in and everything is back to normal.
    Can anybody give me a clue as to where to look to find the source of this?
    I have a sneaking suspicion it is because the applications were not properly de-registered from the previous version (System 9.3.0.1) which had completely different server names as the current system 9.3.1.
    If that is the case, those references would be located in the tables in the main HFM database, but what, or should i even, modify/delete those references?
    Thanks for any help,
    Kelly

    The error is only occurring on our HSS/Core Services box.
    One of the log files for BIPLUS on the HSS box grows to 4GB, cuts off then starts creating another one of itself and does this AT LEAST once a day!
    here is a sampling of the error we are getting on the 'server_messages_usageservice' log file:
    <event logger="com.brio.one.services.mgmt.usage.impl.UsageServiceImpl" timestamp="1210988764908" level="ALWAYS" thread="Foundation Server" sequence_no="390">
    <time>16 May 2008 20:46:04,908</time>
    <context originator_type="UsageService" originator_name="UT1_srvhouhfm09.###.com" host="SRVHOUHFM09"/>
    <message><![CDATA[Starting Usage Service
    ]]></message>
    </event>
    <event logger="com.brio.one.services.mgmt.usage.impl.UsageServiceImpl" timestamp="1210988770426" level="WARN" thread="GCThread0" sequence_no="427">
    <time>16 May 2008 20:46:10,426</time>
    <context originator_type="UsageService" host="SRVHOUHFM09"/>
    <message><![CDATA[1000165]]></message>
    </event>
    <event logger="com.brio.one.services.mgmt.usage.impl.GCThread" timestamp="1210988770426" level="WARN" thread="GCThread0" sequence_no="428">
    <time>16 May 2008 20:46:10,426</time>
    <context originator_type="UsageService" host="SRVHOUHFM09"/>
    <message><![CDATA[1000165]]></message>
    <throwable><![CDATA[May 16 20:46:10.426
    Database Server error: DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
    com.sqribe.transformer.DBConnectionException: Database Server error: DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
         at com.sqribe.transformer.DBConnectionPool.get(Unknown Source)
         at com.brio.one.services.impl.database.BaseDBManager.getUpdateableConnection(Unknown Source)
         at com.brio.one.services.mgmt.usage.impl.database.UsageServiceDBManager.deleteEvents(Unknown Source)
         at com.brio.one.services.mgmt.usage.impl.database.UsageServiceDBManager.deleteMessages(Unknown Source)
         at com.brio.one.services.mgmt.usage.impl.GCThread.execute(Unknown Source)
         at com.brio.one.services.mgmt.usage.impl.GCThread.run(Unknown Source)
    [1000165]:
    DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
    So in one of the log errors, it lists the user that is trying to connect. It is the SS admin I created during the installation, 'hypadmin'. This user of course does not have access to the BIPLUS db, which would cause these errors.
    So I tried something, created a SQL user of the same name with the same password. Restarted services, and everything seemed to work fine, except this time when I tried to launch SS, it said a severe error had occurred, and to restart SS.
    I restarted, same error. the horror consumes me...
    so i went back into SQL, looked at the processes and lo and behold hypadmin was using one measely connection. I killed the process, killed the user ID in SQL, restarted all of my services and everything was golden again except, of course, the monstrosity that is the usageservice log file and the constant hangs while in the user management console.
    does any of this ring a bell? how would a native directory user be configured to access the db???

  • AIR application not able to quit on Mac OS X

    Hello,
    I've created an Adobe AIR (1.5) application and have installed it successfully on multiple PCs and Mac computers.  On a Mac OS X 10.5.6 laptop the application will not 'quit' using either the top Apple Menu bar quit item or from the icon in the Dock.  The only way to quit is to select the 'Quit Application' function I built that opens from the Dock Item (on top of the apple-specific quit function from the Dock icon).  Has anybody else experienced a similar issue?
    Thank you,
    Jason

    Listening for the Exit event and then invoking NativeApplication.exit() is not required (unless your application is doing something specifically with Exit event handling).
    I see that the original posts around this issue were last year and were against AIR 1.5....
    If possible, could you please re-test your application with the recently release AIR 2 runtime (available here http://get.adobe.com/air/) and let us know if you still see the problem?  And if you do, if you could share a small application that demonstrates the issue it would be extremely helpful.
    Thanks,
    Chris Thilgen
    AIR Engineering

  • Application not appearing

    Hi Experts,
    I having created a custom wedbynpro application using FPM, but when I created the Application of the webdynpro component the applciation is not seen.
    However, when I go to the Package and under the hierarchy 'Webdynpro applications'  I am able to view the application.
    BR,
    Aarvi.

    This is alright. i assume that You have created a application based on a FPM_OIF_component of GAF component. That is the reason it is appearing under the application node.
    When you create a application based on you component then your expectation is correct.

  • Open applications not appearing in dock or command-tab.

    I am using 10.9.5 on a Macbook Air and I've noticed recently that open applications don't display icons in the dock.  Command-Tab also doesn't show the icons of all open applications either.  This seems to be recently occurring.  It's quite frustrating switching between applications when command-tab doesn't show the open application icons nor are the icons of open apps displayed in the dock.  Any ideas are appreciated.
    Thank You

    Open the Terminal in the Utilities folder. At the prompt paste the following:
         killall Dock
    Press RETURN. See if that helps.

Maybe you are looking for