Air Canada Aeroplan won't open with Safari
Hello ... I can NOT open http://www1.aeroplan.com/landing/process.do?lang=E
or
www.aeroplan.com
with Safari .... anyone know why?
Mark again ... so ... now I am in Kelowna at a friends house with the same laptop and as I somehow suspected ... I CAN connect to the site. But when back at my place can not ...
I notice I have this problem also when at an airport ... I can access the wireless but the main page will not come up in safari for log in ... but on my wife's mac it will ... or sometimes the reverse scenario ..
So ... where is this coming from? is there a setting in Proxies or something that can help with this ... it's nuts ...
Mark
Similar Messages
-
Facebook won't open with safari
My facebook wont open on safari anymore. it just stopped opening a few hours ago. but other sites opens.
Hello 2dollarhotdog,
We've a couple of articles which contain information that may be able to help get Facebook loading in Safari.
Safari 5.1 (OS X Lion): If Safari can’t open a website
http://support.apple.com/kb/PH5001
Safari 5.1 (OS X Lion): If a secure webpage doesn’t open
http://support.apple.com/kb/PH5058
Cheers,
Allen -
My EKM Powershot Site won't open in Safari
I have an iMac. It is running OS X Yosemite version 10.10.2. I have an internet website with EKM Powershop. It worked fine until a few weeks ago. Then, at some times during the day it said I couldn't log in because of a problem with cookies but at other times it was ok. Now I get the same message all the time and can't log in at all. If I use Chrome it is ok but it is easier for my work if I have it open on both Safari and Chrome. I haven't changed anything with my cookies and that doesn't seem to actually be the problem. Can anyone help?
Problem description:
EKM Powershot won’t open in Safari
EtreCheck version: 2.1.8 (121)
Report generated 3 February 2015 17:12:24 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 4:41:52
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (862.85 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital My Passport 0746 1 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
disk1s2 (disk1s2) <not mounted> : 29 KB
disk1s3 (disk1s3) <not mounted> : 29 KB
disk1s4 (disk1s4) <not mounted> : 29 KB
disk1s5 (disk1s5) <not mounted> : 29 KB
disk1s6 (disk1s6) <not mounted> : 262 KB
disk1s7 (disk1s7) <not mounted> : 262 KB
disk1s8 (disk1s8) <not mounted> : 262 KB
My Passport for Mac (disk1s10) /Volumes/My Passport for Mac : 1.00 TB (649.20 GB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) [Click for support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
7 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.rim.BBDaemon.plist [Click for support]
[failed] com.torch.update.agent.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.google.Chrome.framework.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Safari Application (/Applications/Safari.app)
KiesAgent UNKNOWN Hidden (missing value)
Spotify Application (/Applications/Spotify.app)
Dropbox Application (/Applications/Dropbox.app)
Knowhow Cloud Application (/Applications/Knowhow Cloud.app/Contents/Resources/Knowhow Cloud.app)
apple-scc-20140811-171508 UNKNOWN (missing value)
fuspredownloader Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ℹ️
Cashback Notifier - TopCashback
Reload Button
Add To Amazon Wish List
Turn Off the Lights
Facebook Cleaner
Facebook Photo Zoom
AdBlock
WOT
Duplicate Tab Button
Firebug Lite for Safari
Quidco Cashback Reminder
Better Facebook
clea.nr Videos
Video2mp3
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 136.50 GB
Destinations:
My Passport for Mac [Local]
Total size: 1.00 TB
Total number of backups: 157
Oldest backup: 2012-07-26 15:11:23 +0000
Last backup: 2015-02-03 16:04:33 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 136.50 GB X 3)
Top Processes by CPU: ℹ️
7% WindowServer
2% Finder
1% Google Chrome
0% backupd
0% mds_stores
Top Processes by Memory: ℹ️
73 MB Google Chrome
64 MB Knowhow Cloud
60 MB Safari
47 MB iTunes
39 MB com.apple.MediaLibraryService
Virtual Memory Information: ℹ️
44 MB Free RAM
789 MB Active RAM
762 MB Inactive RAM
956 MB Wired RAM
20.86 GB Page-ins
435 MB Page-outs
Diagnostics Information: ℹ️
Feb 3, 2015, 12:27:28 PM Self test - passed
Feb 3, 2015, 02:15:31 AM /Library/Logs/DiagnosticReports/discoveryd_2015-02-03-021531_[redacted].crash
Feb 1, 2015, 06:41:53 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-01-184153_[reda cted].crash
Feb 1, 2015, 12:02:32 PM /Library/Logs/DiagnosticReports/Spotify_2015-02-01-120232_[redacted].hang
Feb 1, 2015, 03:10:42 AM /Library/Logs/DiagnosticReports/discoveryd_2015-02-01-031042_[redacted].crash -
Archive saved from Safari, file full, won't open in Safari
I had a page open, and saved it as an archive from Safari 3.2.1 on a dual G4.
There's data in the archive file, looks fine, but it won't open in Safari - a new tab appears, but the page never fills with any data...
Any ideas?
Thanks5.1 is buggy, and the Apple Support Software also has to be uninstalled - and downgraded.
Better off with 5.0.x for now.
There are a dozen threads+ about 5.1s issues.
You can also expect some extensions and plug-ins could also be trouble.
And manually clean out every sub folder in AppData with Safari (prefs, history, web, etc) when moving to a new version. Same with Firefox 5/6/etc
I'd make sure to use CCleaner 3.09 and make sure that cleans Safari. -
Force certain url(s) to open with safari
I use firefox for my browsing, but I have so many blockers and security extensions in place that a few sites won't function in FF. so I just open those few sites with safari, and all is well. but I would like to force my these sites to open in safari, and all others open with ff. for example: when I drag a shortcut to my desktop from one of these sites, and force it to open with safari, it works that one time. but when I double-click on it again, it opens in ff (since ff is set globally as my default browser). help!
Hi
If you mean you want those specific shortcuts on your desktop to open with Firefox; then yes you can.
Ctrl-click a shortcut ( or select more than one & ctrl-click) ,choose 'get info'
in the 'open with:' section, change it to Safari.
don't click the 'change all' button - just close the info window(s).
That should force just those particular shortcuts to use Safari. -
In the last weeks when surfing with safari on my mac I see the ads for "MacKeeper" appearing unusually often on the pages I visit, even on pages where they don't make much sense (Food or gardening pages for example). To doublecheck I opened the pages with FireFox and then it shows me different ads. Then again I open with Safari to see if it was just a timely matter of changing ads, but Mackeeper stays there. I used to have it installed for trial purpose but then deleted all via "Cleanmymac". anyone know, if there is a way how they could place a file on my mac to force they ads?
Before uninstalling the remains of MacKeeper, please follow the instructions below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are actually shell commands -- little programs. They’re harmless, but they must be used exactly as given in order to work.
First and most important, don’t run these commands until you have verified that they’re legitimate. Never execute shell commands from an untrusted source without knowing what they do, or at least that they don’t do anything harmful. I’ve posted these same commands, with minor variations, many times on this site. You should be able to find other discussions in which they were used without ill effects. Do that before proceeding.
Some of the commands will probably line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address will appear in the output of the above command. Change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal. -
new pages program won't open iPad cloud documents without crashing--work around is to not open any documents in clouds, but it saves to clouds anyway; however, new pages program shows installed on air book but won't open new pages documents created on ipad without message "need to install a newer version of pages", which I have done. Are these two problems related?
Double tap Home button and delete Pages from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Try again with Pages.
If no joy, delete Pages and redownload again. -
Links within a pdf won't open in Safari, but work fine on Explorer, Firefox
I created a pdf with embedded links and posted it to my site. The links within the pdf work just fine with Internet Explorer and Mozilla Firefox, but they will not open with Safari, neither on a Mac nor on a Windows platform.
Why is this happening and how can I fix it?Hi and Welcome to Apple Discussions...
Try this. In the Safari window, click the Preferences icon right side of page.
Then select the General tab.
At the bottom of that window, below, "Open links from applications", choose the option you want.
Carolyn -
Pdf files won't open in Safari running on a Mac
I just upgraded my MacBook Pro to Snow Leopard in preparation for Lion and ever since the upgrade, pdf files won't open in Safari. I have Reader 9.4.5. It opens documents that are on my machine, it just won't open in Safari, nor do the documents download.
MIght be helpful to disable Adobe plugin by going to Adobe Reader's Preferences -> Internet and unchecking "Display PDF in browser using".
Then dump the atrocious bloated Reader.
See this https://discussions.apple.com/thread/3252667?start=0&tstart=0 for further solutions. -
IDVD won't open with OS 10.5.8 -can't record on to blank DVD discs
When I attempt to open iDVD application, message says it won't open with this OS. Also when I insert a blank DVD (Verbatim) disc am unable to record a film on to it as I get this message: "The disc can't be burned because the device failed to calibrate the laser power for this level of media." I've seen this message on a previous post on this forum but could not see any solution posted. I have recorded onto DVD discs in the past (different make of disc and before I upgraded to Leopard).
I can record on to blank CD audio discs without any problem however.The first thing to try (IMO important) is not to import directly from your camera. Get a Firewire-connected card reader (USB works also but is slow on Macs) and use the Mac's Finder to copy images from the card to a folder on the Mac hard drive. My description below describes a CF card, but the workflow is the same for an SD card or whatever.
I feel pretty strongly that camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn DVD copies of the original images (optional backup step).
• Eject DVDs (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
Good luck! The camera-to-Aperture workflow may or may not be the cause of your specific problem this time but in any event card-to-finder long term will provide a more solid workflow.
-Allen Wicks -
Recovered CR2 files won't open with CS3
Hey, I need help with this!
I worked in a photoshoot with a Canon EOS Rebel XSi and SD memory; then I had troubles trying to download them because the memory wouldn't let me do it, so I used the 'PC Inspector Smart Recovery' and I recovered all my CR2 files indeed. BUT! some of them won't open with Photoshop CS3, most of them do, but there's just some others that won't open and I really need to get this job done
My camera files always worked perfectly with photoshop CS3, plugins are installed, I really don't know what went wrong.I am having a similar problem. I downloaded CR2 files from my camera to my computer and CS3 Bridge will not recognize the files, allow me to open in Camera Raw or open in CS3 Photoshop. I also stuck the same memory card in a Lexar mem card reader and attempted to download to my Mac in CS4 Bridge and that version of Photoshop and Bridge won't recognize the files either, however the CR2 files do appear, where I can view the thumbnails, in iPhoto. All original files are still on the memory cards (4 cards worth of wedding photos!). I've downloaded Camera Raw updates for both cs3 and cs4 on my windows pc and my mac and still no luck. I'm at my witts end! Help!
-
HT1338 now my version of mail won't open with my version of OS-X
I just updated my software...now my version of mail won't open with this version of OS-X.
What do I do?Which version do you have? If outdated, use Software Update.
-
PDF file won't open with double click
Mac OSX 10.6.8/Acrobat 10.1.3.
Suddenly pdf files won't open with a double click, I now have to open Acrobat and file>open.
Also, once they're open, they won't close by clicking the red close dot, I now have to go to file>close.
Very frustrating!Even reinstalling doesn't work with the standard Creative Suite installer. Except for the double-click bug, Acrobat doens't respond to dock-tasks either, like <right-mouse-click> on dock icon and select <quit>.
In this version of Acrobat, the repair function doen't seem to exist anymore. Sadly....
So the problem keeps existing, even with the laterst 10.1.4 version.
==========================
OSX 10.8 - Acrobat Pro X 10.1.4 -
InDesign files won't open with double click
InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.
Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975 -
I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?
I think you solved my problem! Upon following your advice, I first got a message that I had not allowed a connection to the Tax dept computers, which would prevent the file I need to fill out from being e-filed. I proceeded to then open the file at the top of which was a security banner at which I chose the site as safe. I then filled in the first line of the form which autofilled other lines telling me I was connected with the tax site. In a few days when I have the data I need, I will actually attempt to file the return. If there is a problem, I will send another message. Thanks so much for your assistance!
Maybe you are looking for
-
Dear All, Every monthend im getting same proble from number of users while doing proces order and MB1A. That time i will go to GS02 and in that i give some GL's in the set, then the transaction can process by the user and i have to remove those gl's
-
How to Use Row Count Transformation
Environment: SQL Server 2008 R2 Purpose: Track number of records, which were loaded into each destination, entity tables or affected by data transaction. Record each table name and the number of records for each table. Code: CREATE TABLE dbo.PkgAud
-
I remember accidently pressing the import all photos button instead of the 10 photos that i wanted, so i clicked delete. Another thing i always just pull camera card from computer slot & then get a error when it do it saying i shouldnt do it that way
-
How do i make a 3d baseball to add to a commercial please?
Hello, Can someone give me some advice on how to create a 3d baseball to rotate and move around in space for a cool baseball commercial? Thanks in advance. I use AE cs6 and PPRO cs6... cheers, j
-
Wouldn't it be cool if a person could "unbookmark this page" or tab the same way you bookmarks one?... thereby eliminating the cumbersome necessity of cleaning up the bookmarks folder of unwanted bookmarks. After all, who really does that anyway. Usu