AIR-CAP1552I Minimum WISM Support Code

I am looking to install 2 1552I outdoor AP's. I can't find what the minimum code version is on the WISM controller that
supports this AP.
I am running 7.0.98.0 on the WISM. Where can I find this information?

Maybe you are looking for this:
http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html#wp1623290

Similar Messages

Update Failed: AIR for Apple iOS support

While Updating my Flash Builder 4.5 to 4.5.1, and 2 other updates, one being the AIR for Apple iOS support.
When I try installing the update for the iOS support, I get the message: Update is not applicable. Error Code: U44M1P28

Trying to figure out another solution, I uninstalled Flash Builder 4.5 Premium, to install a new full version of 4.5.1 from Adobe's website.
While Installing, I get the following message which showed me exactly where my problem is... I have a prereleased version of AIR for Apple iOS Support.
The Question is... How do I uninstall the prerelease version of AIR for Apple iOS Support? I uninstalled FB4.5, and I removed the remaining folder after installation that was in Flash Builder 4.5 that was in Utilities. though, I still get the message above...
Any idea on how to Uninstall a Prerelease version of AIR for Apple iOS Support?! No where to be found online.

Considering purchase of new macbook air. will mavericks support iWeb?

considering purchase of new macbook air. will mavericks support iweb?

Office 2004 and anything else which only contains PowerPC code.
(61028)

Support Code 2804 on Canon MX922

Support Code 2804 MDF failure to scan. 'doc size not suitable for duplex scanning'. Win 7, Pixma MX922
Tech support tried valiantly to figure this out but could not, so I'll share my solution. I suddenly kept getting Support Code 2804 failure on MDF after duplex scanning several hundred pages of docs to PFD files. Three calls to TS yielded nothing but a guess that document paper had some kind of security to prevent scanning. I've not heard of that, but it was a clue that I researched.
Here my answer to the 2804 failure, but it's not good. Scanner feeds first page, and displayed the error saying doc size not suitable for duplex scanning. All you can do is clear the error
Measure your document. Printer docs say ADF will work with 4x6 and 8.5x11. Read that literally. My financial institution switched to a 8.5x10.3 page size. When I got to those docs, the error began. I have not yet experimented on the MINIMUM document length, but the 10.3 definitely fails.
This appears to me to be something that could be fixed. Not sure if is hardware of software, but is a definite drawback to an otherwize good scan process.

Ebony, I'll spell out specifically what could be inferred from my post. 11 inch paper works, 10.3 inch paper fails. I'm not sure at what point between those two lengths the failure begins. Some experimentation with various lengths could more precisely determine that, but Canon should do that research themselves. The point is that it makes no sense to me that this limitation exists. The mechanism should continually feed whatever size, within reason, that is fed as long as it detects more pages. Obviously as some point the doc will be too short to feed correctly, but a difference of seven tenths of an inch is reasonable to expect functionality to continue. Having 42 years of software development behind me, I really feel this issue can be fixed programaticly, be it driver or application.

Error 88 or Support Code 88 in Canon Driver printing on art paper from Lightroom

Re: Error 88 (Support Code 88) of Canon Printer Driver, using Pixma Pro9500 - April 20, 2014
I'm replying to myself from two years ago, and to the rest of you, regarding Error 88. (My question of April 2012 is in the Photoshop department of Adobe Community. For those who don't know but are reading this anyway for some reason, Error 88 is a message from the Canon Printer Driver that tells you you haven't set the paper size correctly for printing on fine-art paper. But it may appear anyway, even if your settings are correct.)
At the time I found no resolution to the problem, just a workaround: to print from Lightroom itself. Too bad this was after months of hassle and expense, including a probably fraudulent (and certainly useless) repair (supposedly replacing the Pixma's logic board and paper sensor), and the ministrations of a techie who could only conclude there was something wrong with my copy of Photoshop which provoked the Error 88. But he made me realise I could print from Lightroom, and that's what I've been doing ever since. (The possibility had never occurred to me, as my routine of printing from Photoshop was working fine.) This has been a good move after all, since Lightroom offers many advantages over PS where printing is concerned: tonal controls and more in Develop, and the possibility of creating a Saved Print.
But to print from Lightroom, I had to crop my printing files to the image. (In PS I had always created a document the same size as the paper I planned to use – A4 or A3+ – and positioned the image where I wanted, with margins all around. But in Lightroom I set margins and position in Print Mode, starting with a borderless file.) This was a bit of work, but unavoidable, and a good thing on the whole. So for a couple of years I printed in this way.
But meanwhile, my 2009 iMac was developing other problems, and finally I had to replace it. (After only two or three years of use, it was shutting down spontaneously, a problem no one was able to resolve, about which every techie has a different opinion, and about which Apple is completely mute and unresponsive; thank you Apple Computer for your supposedly ultra-reliable products – I can only say it’s a good thing you don’t make pacemakers).
So for about ten weeks now I have a nice shiny new 2013 iMac, but I’m keeping my fingers crossed. Also I have the new OS Mavericks, new versions of Photoshop CS6 and Lightroom 5, the new Canon Driver. I have my complaints about the OS (particularly a few interface/viewing design choices that strike me as colossally stupid and unnecessary), but that's beside the point here.
Having not yet printed with the new setup (nor for a few months before), and knowing that it's good to use your Pixma now and then, I thought I'd dedicate a few hours to printing. I figured it could work out easy, since I planned to print from Saved Prints. But as soon as I hooked it all up, checked my settings, and clicked Print, I see the printer icon bouncing in the Dock with its little yellow trouble flag. I check that out and am very dismayed to see my old nemesis, Error 88, which tells me I haven't set the paper size correctly. But it's correct, of course. (As before, I'm printing on fine art paper, A3+.) Beg your pardon, Canon now calls it "Support Code 88", thinking of all the Support you'll get from them.
I tried a few of the obvious things: start/restart computer, printer, Lightroom, etc., but to no avail. Also, supposing that my Saved Prints were perhaps no longer valid in the new LR, I tried to print directly from the file, bypassing the Saved Print, but no go.
I should also note that, in Page Setup, the Default paper size “Super B/A3” (330x483mm) was new to me – seems to me you could set “A3+ Art Margins”. A3+ as I know it from the fine-art papers I use is 329x483mm anyway (also as given in Page Setup), if that makes any difference.
If it's any use, here are some particulars on the current situation:
iMac 27”, late 2013, 3.4 GHz Intel Core i5, 8 GB, Mac OSX 10.9.2
Lightroom 5.3 (Camera RAW 8.3)
Photoshop CS6 (version 13.0 x64)
Canon PrinterDriver_Pro9500 series_108420 (10.84.2.0)
And my settings: LR Page Setup: set “Art A3+ (Margin 35)”System Prefs/Printers & Scanners – set Default paper size “Super B/A3” (330x483mm) (found via “Format For:” in Page Setup)LR Print Settings:
Printer: Canon Pro9500 series (exclamation point – not recognized?)
Presets: Last Used Settings
Color Matching: Canon
Paper Handling: All Pages – Automatic – NO “Scale to fit paper size” (but “Destination Paper Size, though grayed out, reads “Suggested Paper: Art A3+ (Margin 35”)
Quality & Media: Media Type: Fine Art “Photo Rag” (or “FA Museum Etching” or “FA Matte”); Paper Source: Front Tray; Print Quality: High; YES Grayscale Printing
Color Options:
Color Mode: Standard; C-M-Y and Tone all left at zero
Brightness: Normal; Intensity and Contrast both left at zero
It all looks kosher to me. Does anybody know anything about this problem? I'll be very grateful.
AlienAl - still alien after all these years

Apple and Canon programmers don't read here.
You need to tell them about this at www.apple.com/feedback

Adobe AIR with Captive Runtime Support for Mobile | ADC Presents | Adobe TV

In this video, Technical Evangelist Andrew Trice covers Adobe AIR with captive runtime support for mobile application development, which will benefit your Flash Builder projects for the Android OS.
http://adobe.ly/wyNYjD

Witch version of flash builder is this?

Support code 1600, touch screen not working

The 1600 support code popped up to tell me that two of my ink cartridges are low, but it won't let me do anything else. The touch screen seems to have stopped working. Also, is there any way I can change settings so that certain documents are printed in black and white only?

Hello.
The 1600 error indicates that one or more of the ink tanks are empty.
Please replace the empty ink tank in order to resume operation.
Unfortunately, the empty color tank would have to be replaced even though you will be printing a black and white document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Browser inside a Flash/FLex/Air-App with WebGL-Support?

Hello,
I´m using Adobe Air/Flex to build a Desktop App. Inside the App the user should be able to access an Internet Browser. This part is actually working so far.
BUT: THE ADOBE AIR BROWSER IS NOT SUPPORTING WEBGL.
Is there any method to activate the WebGL Support so I could open WebGL-Dependent URLs from Inside my Desktop App?
Sure, I could tell the User he should Alt+Tab to switch to an WebGL-Compatible Browser, but it would so much better if this all would work from inside my Application.
Thanks for answering!
Stefan

The syntax for the update is incorrect, you can use the update statement as
sqls.text = "UPDATE videos SET thumb = 'ram' + '''s' where id = 2";
Let me know if this worked.

Pixma MX922 - bad setup out of the box... support code 1008... no paper in bottom tray

Feeling a return coming on. Just ordered this new off ama-zon. and 5 minutes into setup, getting repeat support code "no paper"
- loaded the special paper. adjusted the paper guides.
- bottom tray doesn't 'quite' close flush.
- after opening, my 'special paper' is now crushed at the back right corner.
Ideas?
Should i flip this thing over and look at what is 'blocking' it from closing?

Yes, I should flip it over and see an errant firewire cord stuck up in there... nice! Back to set up. (feeling my age)

My MacBook Air is in a support profile for one of my Apple IDs while all my other devices are in a support profile for a different one of my Apple IDs; how can I combine under one?

My MacBook Air is in a support profile for one of my Apple IDs while all my other devices are in a support profile for a different one of my Apple IDs; how can I combine under one?

Actually, this can be done without merging Apple IDs, as I found just by trying this out: I went into the support profile for the Apple ID that had only my Mac listed. I then chose to disassociate the Mac from that Apple ID. I signed out and signed in using my other Apple ID (the one with all my other Apple devices). I chose to add/register a new device, entered my Mac's serial number, and now it is associated with all my other Apple devices under a single Apple ID. No merger of Apple IDs required.

Can't install CS4 on lion 10.8, says version of adobe air is no longer supported

Can't install CS4 on new macbook pro lion 10.8, says version of adobe air is no longer supported, I've tried to download newest version of air and it keeps saying same thing! Ive looked through forums and questions, am I the only person having problems? Why?

Here is a knowledge base article from the apple website on troubleshooting games for the ipod. It also, has links to the different companies that make the ipod games.
Troubleshooting iPod Games
http://docs.info.apple.com/article.html?artnum=304220

Adobe AIR for Playbook - Cookies supported?

Adobe AIR for Playbook - Cookies supported?
Following a discussion on - http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Cookies-supported/m-p/6 36455
Has anyone here or at Adobe seen this thread to consider if it is an AIR issue?
Sorry if this is the wrong forum to post in.
TIA
-SR

Hi SR,
I wanted to let you know that while we typically don't handle Playbook issues on this forum (the RIM forum you linked to is the correct place for these discussions) I have forwarded this question along to the team to see if anyone has encountered this. I'll post more info when I hear back.
Thanks,
Chris

I need to reinstall CS5 on a machine that has had to be reformatted, i need a Support Code after obtaining the Challenge Code. Please help

I need to reinstall CS5 on a machine that has had to be reformatted, i need a Support Code after obtaining the Challenge Code. My email address is <removed - kglad>
Please help

<moved from Adobe Creative Cloud to Downloading, Installing, Setting Up>
use your serial number to activate. if you cannot connect to adobe's server's to activate, Sign in, activation, or connection errors | CS5.5 and later

Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs?

Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs? If not, is there an alternative or workaround solution so I can reuse some javascript routines that requires bufferArray like Uint8Array...? Thanks in advance.

You needed to use SDK 5.1 or later. AIR uses 6.0 or 6.1 now, so Retina is ok without any special tricks.

Setting up air printer on non-supported printer using vista os

how to set up air printer on non-supported printer using vista os

Best, as with beauty, is in the eye of the user.
Not sure if Epson has an app avaialble, but there are a number of them. Check the capabilities and reviews. Some printing apps have more capabilities that others.