AIR-CAP3702E unable to change to autonomous firmware.

Resently bought 2 new AIR-CAP3702E-A-K9's and I am unable to log into the product to change the firmware to ap3g2-k9w7-tar.152-2.JA.tar. Tried following many manuals and videos including https://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://www.youtube.com/watch?v=xlNu7LXrAsQ
I have read more than a dozen manuals over and over again with no success. I have downloaded all sorts of programs to telnet, hyper terminal, and serial systems to try to connect. I have made all sorts of cables to connect to the Cisco product and tried 3 separate business that work with Cisco in order to change the firmware, with no solution. Ran wireshark to find the ip address of the 3702 and the only thing it came up with is 0.0.0.0
If you can help me can you please put it into a step by step process.
Thank you.

Using a TFTP Server to Return to a Previous Release

Similar Messages

Unable to change WINS workgroup on new Macbook Air (Lion)

Hi all,
Just brought home a new Macbook Air 13. Was loving it until I started digging into networking.
Have found that i am unable to change the default workgroup in the WINS tab of networking. The default is simply "WORKGROUP"
In the automatic profile it is greyed out, but lets you type in a different name. That change is not saved though and is immediately discarded when you click OK.
Through some online research i found that others who have had this problem solved it by recreating that automatic profile and changing the name in the new one they create. When I do that, the workgroup name is no longer greyed out, but changing it is still not saved. As soon as I click on OK, the changes are immediately reverted.
I also found some advice online that suggested I needed to tweak setting in the Directory Access utility which could be found in Applications > Utilities. I found no such utility. Wiki states it was renamed to Directory Utility, but that was not there either. I did however find a 'directory utility' in System > Library > Core Services. Opening that showed the following services: Active Directory, LDAPv3, and NIS.
No SMB or CIS which I am assuming are the services required for WINS and workgroup related settings.
Any thoughts?

This might be a timing or propagation issue.
The settings I tried all last night to "save" - suddenly took hold sometime this morning. I made a lot of changes and did a lot of tests, wish I could tell you which one finally did the trick... but given the 8 hours it took to kick in there is simply no way for me to know.

WRT610N - Unable to change "Server Name" - No Text box.

I have my WRT610N running V2 firmware. In all of the documentation I see, on the Admin area within the Storage Tab, there is a text box next to the Server Name and you are able to update that field to change the Server Name. However, I have no textbox here, and thus am unable to change the Server Name. I've attempted factory defaults, firmware upgrades, and multiple reboots to attempt to solve the issue. Any help out there?
Thanks in advance

Whats the Firmware version is installed on your Router and whats the Version number of your Router? If it's an Version 2 Router, then it doesn't have an option to change the Server Name. As far as i know the Version 1 Router has an option to change the Server Name.
If its an Version 1 Router and if you have updated the firmware, with the latest firmware you don't have an option to change the Server Name, By Default its WRT610N.

Unable to change wireless security settings on WRT54GS v5.1

I'm using a WRT54GS v.5.1 with the latest firmware (v1.50.9).
Set this up this weekend - all was fine until last night when the router stopped broadcasting the signal. I've reset the modem countless times and powered it down and back on again.
The router is now working fine - but I'm unable to change any of the wireless security settings. When I try to change the setting under Wireless > Wireless Security to WEP, it just jumps back to Disable and no changes can me made. Same situation when trying to enable a Wireless MAC Filter?
Any ideas? I don't want to use the router without any security in place!

you can try to upgrade the firmware of your.
try this link :
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=557&p_created=108421...
make sure to select the correct model and version of your router. if you cant see the model # of your router as one of the downloads, you will need to have the router replace (hope you'll not).
hope this help.
~ lyf_R_foeittee ;o) ~~

AIR-CAP3702I booting up in mesh mode and not joining our 5508 WLC

I have a batch of 30+ AIR-CAP3702I-A-K9 APs that I need to setup but none of them are joining to the 5508 WLC and when I connect a console cable and view the output from the AP it shows that it is trying to initiate in mesh mode. I have read other forums that are showing that I need to put in the APs MAC address to a filter list on the WLC for it to show up and then I will be able to change it from mesh mode to local mode. The only issue I'm having with that solution is not knowing how it will affect my current production environment off of that 5508 WLC. I have 69 active production APs with clients working off them and there are no MAC filters currently in place on the WLC. By adding a MAC filter entry for the new APs would the WLC create an implicit deny for all other clients that don't have their MAC addresses entered?? If so is there another work around? Can the mode be changed via the CLI on the AP itself to make it local instead of mesh?

sh capwap client rcb
AdminState : ADMIN_ENABLED
SwVer : 7.6.1.118
NumFilledSlots : 2
Name : AP88f0.4290.7184
Location : default location
MwarName : xxxxx
MwarApMgrIp : x.x.x.x !<it has the correct name and IP of the WLC>
MwarHwVer : 0.0.0.0
ApMode : Bridge
ApSubMode : Not Configured
OperationState : JOIN
CAPWAP Path MTU : 576
LinkAuditing : disabled
ApRole : MeshAP
ApBackhaul : 802.11a
ApBackhaulChannel : 0
ApBackhaulSlot : 2
ApBackhaul11gEnabled : 0
ApBackhaulTxRate : 24000
Ethernet Bridging State : 0
Public Safety State : disabled
AP Rogue Detection Mode : Enabled
AP Tcp Mss Adjust : Disabled
AP IPv6 TCP MSS Adjust : Disabled
Predownload Status : None
Auto Immune Status : Disabled
RA Guard Status : Disabled
Efficient Upgrade State : Disabled
Efficient Upgrade Role : None
TFTP Server : Disabled
Antenna Band Mode : Unknown
802.11bg(0) Radio
ADMIN State = ENABLE [1]
OPER State = DOWN [1]
CONFIG State = UP [2]
HW State = UP [4]
Radio Mode : Bridge
GPR Period : 0
Beacon Period : 0
DTIM Period : 0
World Mode : 1
VoceraFix : 0
Dfs peakdetect : 1
Fragmentation Threshold : 2346
Current Tx Power Level : 0
Current Channel : 11
Current Bandwidth : 20
802.11a(1) Radio
ADMIN State = ENABLE [1]
OPER State = DOWN [1]
CONFIG State = UP [2]
HW State = UP [4]
Radio Mode : Bridge
GPR Period : 0
Beacon Period : 0
DTIM Period : 0
World Mode : 1
VoceraFix : 0
Dfs peakdetect : 1
Fragmentation Threshold : 2346
Current Tx Power Level : 1
Current Channel : 165
Current Bandwidth : 20
It is showing the following error on our WLC in the log file:
Tue Jul 15 14:01:26 2014
AAA Authentication Failure for UserName:88f042907184 User Type: WLAN USER
And here are some of the errors it's showing on the AP after bootup:
*Jul 15 17:47:30.471: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
*Jul 15 17:47:31.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul 15 17:47:31.031: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:31.039: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jul 15 17:47:31.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 15 17:47:32.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:33.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul 15 17:47:35.471: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
*Jul 15 17:47:35.471: %DTLS-5-ALERT: Received WARNING : Close notify alert from x.x.x.x
*Jul 15 17:47:35.475: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jul 15 17:47:35.483: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 15 17:47:36.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul 15 17:47:36.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:37.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul 15 17:48:15.007: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
*Jul 15 17:48:15.007: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
*Jul 15 17:48:15.007: %MESH-6-LINK_UPDOWN: Mesh station 88f0.4290.7184 link Down
*Jul 15 17:48:17.007: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Jul 15 17:48:22.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Jul 15 17:59:10.099: %CAPWAP-3-ERRORLOG: Invalid event 31 & state 4 combination
*Jul 15 17:59:10.099: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 31, state 4

Unable to change tracks on my stereo after upgrading to iOS 6

After upgrading to iOS 6 yesterday I've noticed a problem playing my music through Bluetooth on my Alpine car stereo. It still plays but I am unable to change tracks with the stereo, I have to manually do it on my iPhone. This is a problem, any ideas?

I spoke to a rep at Alpine today. They are aware that there are major issues with the release of iOS 6 and ALL their products. The said they will have to do a firmware update and he had no idea when that would be available.
Not good as I bought a new unit yesterday ! It workd great driving home and this morning no iPhone interface would function properly. I updated my OS last night. And I cannot go back to OS 5 I am told by Apple people.
I love Apple products but I must say I do not like their "we know best" attitude when it comes to deciding what OS I should run on my iPhone. I would much rather have OS 5 and let my iPhone work with my stereo.
Hopefully this firmware update will not take too long but I know there is no way it will be right away. The Alpine rep said his phone started ringing off the hook at 8 am from Alpine techs all over the country !
So clearly this was news to them.

SPA8000 - unable to change DCHP LAN options

I have another problem with my SPA 8000. None of the options in the 'LAN Status' tab are editable. I can see the DHCP address & the number of client leases, but I can't change anything. I've factory reset the device & am logged in as administrator.
I pasted an image of this screen here: http://img208.imageshack.us/img208/859/spa8000.jpg
I'm on firmware 6.1.3
Does anyone know how to make these options editable?
Cheers,
Gareth

it looks like that's how the device is designed because i looked at the SPA8000 here and i am unable to change the LAN IP address as well -- it's using firmware 5.1.9 (a)
i used it as a router which is why i never really checked this feature before
| isolate! isolate! isolate! |

WVC200 - unable to change admin password or add new users

Hi,
I have WVC200 installed at home. It works fine in terms of viewing video from home and over the net.
However, from the setup page I am unable to change the Admin password or add new users.
Pls help.
rgds
hemant

Hi
hemantparmar11
and
welcome to the Cisco Home Community!
The WVC200 is handled by the Cisco Small Business Support Community.
Please go here for discussions about this device.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Sun Netra X4250 ILOM update = unable to change iLOM ip to the factory def

This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
http://www.sun.com/servers/netra/x4250/downloads.jsp
ILOM updated to Version 3.0.3.30 (ILOM) build 44534
We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
So, we suspect that the problem could be due to the new firmware.

This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
http://www.sun.com/servers/netra/x4250/downloads.jsp
ILOM updated to Version 3.0.3.30 (ILOM) build 44534
We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
So, we suspect that the problem could be due to the new firmware.

EA6900 - Unable to Change to Bridge Mode or Reset router Via Smart Wi-fi

I am unable to change to Bridge mode to do a reset of the router from within the software. There is no option to change it to Bridge. And under Diagnostics, there is no option to Reset. I am trying first and foremost to set the IP scheme to the same as my DSL router. I would rather not put it in Bridge mode. I have tried setting the IP out of the range of the DSL router, and within the same scheme.
It does not work. This is the most current version of the firmware.

Hi Dr. Tek, You can try to reset the router for 30 seconds and power cycle it after. Try to access the Linksys Smart Wi-Fi software again and check if you can change the connection type to bridge mode. You can also use another internet browser to isolate the problem.

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

Unable to change Profile picture in Windows 8

I recently upgraded to Windows 8. The upgrade imported a picture from my Windows 7 Skype, and now I am unable to change the profile picture. There is no menu at the top in Windows 8, which prevents me from changing the profile picture.
What are my options for correcting this, and also how does one sign out of Skype in Windows 8?
Thanks so much.

Although I'd love to provide a proper response, unfortunately I too have only questions, which I'd hope someone could answer. "Opening Skype and clicking on the picture" isn't as helpful as one would hope. With Windows 8 -- in either mode, through either Google Chrome or IE10 -- there is not only no menu or options with either right or left clicking, but no clear way to change a profile picture through any other means. I've tried everything I could think of -- literally wasting HOURS trying to change this thing. Googling the question gets me only fixes that don't appear to apply. In fact, the lack of coherent help regarding anything having to do with Windows 8 is nothing short of mindboggling -- and I consider myself a pretty good finder-of-information normally!!! I read elsewhere in these forums (unfortunately lost to me now that I have signed in) that it may be a problem relating to whether my browser is 32 or 64 bit (if I read it right). I have since tried to load Chrome in 64 bit.... probably unsuccessfully, given I still can't seem to do much differently. Being a bit of a techno-dud I don't know how to check which version I now have as even with the "about:version" function, the reply isn't definitive to my untrained eye (unless WOW64 means something?). I need things somewhat dummied down. I'm totally new to both Windows 8 and Skype (and for that matter Google Chrome, having always been a Firefox fan, which apparently is not working properly for Windows . ANY help that might be available would be greatly appreciated in making this experience less frustrating. Thank you for whatever you can do!!!

Unable to change "Your name" in BIS

I have my Gmail account set up in BIS and everything is working perfectly, however, I am unable to change the "Your name:" field to anything other than what's already there. I've tried deleting the account and re-adding it in there from the web site as well as from my BB to no avail. When I change the field, I don't get an error and I receive a message saying "Email account successfully updated." but it doesn't stay. For some reason, just my last name is in there (i.e. Smith) but I would like to change the "Your name:" field to my full name: John Smith.
Is there something I'm doing wrong? TIA!

What did your mobile operator have to say about it? This seems to be a problem specific to them. They can disable most of the fields your BIS account.
WhackBerry_

Unable to change setings, was in Siri, got 'jammed'

This 'Senior' got jammed-up. Unable to change settings, settings unresponsive and am stuck in Siri. Problem happened IN SIRI, now can't change settings to even access the Siri option.
SETTINGS WON'T LET ME ACCESS OPTIONS 'below level of Wallpaper'. Swipe won'r allow to go to any other screen in settings.
This happened in SIRI and I can't even disable 'turn-off' Siri
Unable to close applications on bottom of screen as well, as usually done.
The 'voice mode' is on, and that is what jammed everything up.
The only appications which show 'open on screen are' Messages,Phone, Settings and Safari, Mail, Music, and I am prevented from 'closing them'.
I did a turn-off, began again with the apple logo but can't reset.
Can't get past the first screen in my apps.
I BELIEVE it is a SIRI problem but can't change settings other than 'Airplane Mode through Wallpaper.'
I bet there is someone who would help a 'Grandma'!
What on Earth IS wrong?!!! and how can I get 'out of it' without going to the Apple Store.
Tiny store ,International Record as "Smallest Apple Store in the World", Santa Rosa, California..and they aren't much interested in giving-up that claim to fame!
it's usually like the 'final boarding of Noah's Ark in there" and NOT a fun place to be!!!
Sue,
Superwhiff

User's Group,
Immediate help from randers4 got me 'back in business'. I would have not beieved I could have done this without a trip to the store and a distant appointment date.
Things seemed messed-up beyond my ability to affect any change!
Alone, this would not have been possible. I feel I learned a great deal about the IOS 5 system's Siri quirks.
This is what it is all about.
People helping others who know less than they do!
Gratitude is such a small word,
this was monumental for me to have done even with the assistance of another person.
Superwhiff,
Sue from Santa Rosa

AIR-CAP3702E unable to change to autonomous firmware.

Similar Messages

Maybe you are looking for