Air Card not responding

My 13 inch 2008 Macbook Pro has decided it does not have an AirCard installed anymore.   Any suggestions?   Still running Snow Leopard on that machine.  Everything else seems ok.   Checked the connections and visually checked.  Nothing obvious.

Resolved.   Apple replaced under AppleCare.

Similar Messages

  • Equium A100-338 - Flash Card not Responding

    Everytime I close down World of Warcraft something pops up in the top left hand corner (looks like it should be a window but only top bar showing) which reads 'Toshiba Flash Card (Not Responding)'. What can I do to stop this from happening?
    Im pretty sure it pops up throughout the game as well as I hear a ding.
    I have a Equium A100-338.
    Thanks for any help!

    Hi,
    a solution can be disabling the flash card service if you dont need your flash drive.
    You can disable it just by following these steps:
    - Go into Start -> settings -> Control Panel -> Administrative Tools -> Services
    - Make a right click on "Smart Card" and left-click on "Properties"
    - In the window which pops up you have to stop the service and disable it with choosing "Disabled" at the option "Startup Type"
    After that your flashdrive service is disabled and you wont get that annoying errormessage anymore.
    (I hope so :O )
    Greets

  • Toshiba flash card not responding

    I have had my laptop for several years and lately I've been frequently getting the pop-up message 'Toshiba flash card not responding'. It's almost impossible to click away this message. I think there's a relationship between this and the fact that Internet Explorer is slow to start up and sometimes stops running for no good reason when I am online.
    How do I fix this?

    the toshiba flash cards are the cards that appear at the top of your screen when you rollover it or when you perform a function using the FN button and any of the F keys them not functioning will not cause any problem with your internet explorer but whatever caused the Toshiba flash cards to not work might be making your IE not work

  • 3G AT&T air cards not working with iChat, Please Help!!!

    We have a macbook air, a black macbook and a macbook pro running 10.5.2. We can do audio and video conferencing with the local network with either airport or ethernet with the regular internet service provider. When we switch to the air cards (AirCard 875 USB) they can connect and chat but when they try to do video conferencing an error comes up saying that, well, en error had occurred. switching back to the local network, and all works fine. I'm sure we're not the only people using these cards using iChat so if anybody has come across this or similar issues please comment on this, thank you.

    That was the older post. at this point we can forget about firewalls and airport. this is all thru the air cards. mentioning the local network (which does not have a firewall) was to point out that iChat seems to work fine and it's not a software issue in the computer end of it. Unless we can go into the aircard's settings and open ports there... if that makes any sense?

  • Beam Internet/Laptop Connect Air Card not working properly

    We recently upgraded to the ATT Beam aircard as we lost our previous version on vacation. We live in a rural area and using the Laptop USB Connect Card (Beam) is the only access to the internet. When we first activiated it we were able to connect to the internest the first couple of days (Windows 7). Now, the digital read out on the Beam shows "Ready to Connect" but when opening the All Access icon to connect, we either get a "no modem/device detected" or it will say its connected on All Access but the Beam show Ready to Connect and we have no access. I've run the diagnositic too, I've deleted All Acess and reinstalled, I've unplugged and plugged the Beam back in, nothing works, I have not been able to connect to the interet with it at all. I am currently teathering off my cell phone. I'm locked into a 2 year on this Beam since I upgraded and so far its not working. Thoughts?

    Hello @njames
    I’m sorry to hear you’re having issues with your Air Card; I’d be glad to help you out!
    If you could please send us a private message providing your
    Full name
    Wireless number
    Best time to contact you and alternate number if available
    We will reach out to you within 2 business days.
    Thank you,
    Charise

  • FXO Card not responding

    Hi I have a VIC2-4FXO card in my Cisco 2901 router and its not responding. i replaced it with another workiing card and still the new card didnt respond.
    any advice anyone?
    Thanks,
    Surendra

    hi,
    yes, i can see it in my inventory and i am also seeing my PDVm in my inventory.
    i dont have anything else on the router that is using dsp resources.

  • My mac air is not responding on guest log in

    on log in with guest users the system is not responding, even i have to force shut down the system

    Hello, biswajit68. 
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting articles I would recommend going through that may help resolve this issue.
    Using Disk Utility to verify or repair disks
    http://support.apple.com/kb/ht1782
    About Disk Utility's Repair Disk Permissions feature
    http://support.apple.com/kb/ht1452
    Cheers,
    Jason H.

  • Installer for Adobe AIR does not respond when double-clicked?

    I tried to install Adobe AIR on my laptop (WinXP Professional, SP3), but the link at http://get.adobe.com/air/ didn't work - website said 'downloading' and to click OK when prompted, but I never got prompted.
    So I found an alternate site, downloaded the installer and double clicked to run it. Nothing happened. So I tried a couple more times before checking my Task Manager.
    Under 'Processes', there were several instances of the Adobe Air Installer.exe running, but nothing was happening that I could see!
    I'm not sure if it's a conflict with any other software or insufficient system requirements, but I'm pretty sure I'm not doing anything wrongly, cos I managed to successfully install Adobe AIR on another laptop I have, also running WinXP, and got Tweetdeck to work on it.
    Would appreciate any help on this matter from the more enlightened.
    Thanks in advance!

    Are you sure that you don't have Private Browsing enabled when Firefox is opened? <br />
    Tools > Options > Privacy = '''Automatically start Firefox in a private browsing session'''
    With that setting selected there is no (Private Browsing) showing in the Title bar.

  • Fastmac wireless card not responding

    Hi all,
    I just purchased an 802.11n wireless card for my Mac Pro from FastMac. I've got a 2.8 GHz Quad-Core Intel Xeon machine and am running OS 10.5.8
    I used these online instructions to install it. The admin at FastMac emailed and asked me to send the 'hardware overview' info off my System Profiler so that they would be sure to send me the correct card. The card had 3 antennae terminals marked 0, 1 and 2. There were 3 antennae wires in the Mac Pro marked 1, 2, and 3. I hooked wire 1 to terminal 1, wire 2 to terminal 2 and wire 3 to terminal 0. Not sure if this was correct or not. After reboot, I cannot get the card to recognize my airport extreme base station (fig 1). In my network preferences, I disconnected my ethernet connection and made appletalk active in the airport network (fig 2).
    If one of the three antennae wires is not seated correctly on the card, would that cause a problem?
    I'm kinda stumped.
    Fig. 1
    Fig. 2
    Thanks in advance for any input.
    Dennis
    Dennis Roliff Photography
    Message was edited by: wunwspirit

    thanks to all who viewed.

  • AT MIO-16E-10 card not responding

    My LabView test system with this DAQ card, stopped working one day. The program would just hang when started. I checked the hardware through Measurement & Automation Explorer and the card shows up fine. The resources check out with control panel in Windows. But if I try to run the View Resources or Test Panel, Explorer hangs and I have to CTRL-ALT-DEL. In Windows Control Panel, there are no conflicts reported.
    Suspecting the card, I removed it and tried it in another computer. No problems, the card works fine when both viewing the resources or running the Test Panel.
    It looks like a software problem, but I haven't changed anything on the system and it worked fine before. My NI-DAQ drivers are at 6.9.3f3 and M&AE is 2.20.3010
    . The system with problems is Win95.
    Any ideas?

    Uninstalling and re-installing the driver didn't do it. There was more than one installation of the drivers on the system, so I tried to delete them all. I also remove all NI software from the system to start from scratch, but I still have the same problem.
    Before I completely wipe the system and upgrade to Win98, is there any files on the system I should look for multiple copies of that may be causing the problem?

  • Why my macbook air camera not working? Neither Photo Booth nor Face time.

    I have not been able to use Face Time, Photo Booth and Skype as the camera of my Macbook air is not responding? Any solution guys? Will appreciate the answers from the people who have experienced this problem and have solved it successfully.

    I had this same problem, and the way i have resolved it was by doing a back up for the Time Machine. Hadn't done that in 190 days and after I did it my camera work after a sleep for the first time in months.

  • Yosemite update not responding

    Hi,
    I just update my Air (Early 2014) to Yosemite. At the end of the installation something went wrong. My air is not responding and the installation process is not carried on. It tells me that the installation is finished in about 1 minute but since a few hours nothing changed.
    What can I do?
    Thanks for you help,
    Michael

    Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • I am getting the message "the disc you inserted was not readable by this computer" when I plug in a verizon air card into my macbook air.  It also does not show up as a device on my desktop.  However, I select "ignore" and am still able to connect.

    Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject.  I select ignore, and am able to connect to the internet, but don't know why this happens.  Also, the air card is not showing up as a peripheral on my desk top.  Any ideas why this might be happening and how to fix it?

    When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
    If I need to replace it can the data on it be recovered?

  • Why will my macbook air not save a word document without word freezing up and not responding?

    I recently got a Macbook Air.  Whenever I try to save a word document I get the colored pinwheel.  After the colored pinwheel appears, I go into force quit and see that Microsoft Word is not responding.  This happens every time I try to save a word document.  To test the issue I tried to save a blank word document to see if I was just trying to save too much.  Even with the blank document I got the pinwheel and the application was not responding.  I have had macs before and none of them have had any issues.  Please Help!

    Try using Disk Utility (in Applications > Utilities folder) to Repair Permissions.

Maybe you are looking for

  • Poor colour depth/banding with Apple Mini-DisplayPort-to-VGA adaptor?

    I'm using the Apple Mini Display Port to VGA adaptor to hook my MBP up to a projector in the theatre where I give lectures. I am getting colour depth/ banding issues - images seem to be displayed in thousands of colours, rather than millions, creatin

  • Mass Maintenance- Purchase Requisition block

    Dear All, Our client want to block hundreds of PR thru Mass maintenance tcode. Manually we block in status tab in PR. As lot of PR's are there, how to block with Mass maintenance tcode. Kindly advice how to do. Regards

  • How can i restrict display or conceal data for a flexfield

    How can i restrict some property for a flexfied ? begin select responsibility_name into l_responsabilidade from fnd_responsibility_tl where responsibility_id = l_rep_id and language = userenv('LANG'); end; if l_responsabilidade in ('Operator') then  

  • DW8: opening an existing file changes it

    The coding is very suss, I admit it: these are sites built originally in Drumbeat 2000 and imported into DW8. An enormous amount of manual work had to be done on them after the importing, but at least they worked. Every time I open any of the .html f

  • Location Manager and Time Zones Feature Request

    I use my Powerbook for consulting - and travel extensively. Location Manager handles my network setups, but, to the best of my knowledge, NOT the time zone information. I'd like to have the option to set the time zone from my location manager, so tha