AIR-CT2504-15-K9
I need a wireless AP list compatible with AIR-CT2504-15-K9!
Thanks!
Here is a matrix that tells you what code is supported on what platform.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
The AIR-CT2504-15-K9 can handle up to 15 Accesspoints.
Similar Messages
-
Anyone got the AIR-CT2504-HA-K9 to work on N+1 Redundancy ?
Hi Guys,
Seems like the new Part #AIR-CT2504-HA-K9 needs some kinda licensing...to work... otherwise the redundancy is same as it was ealier with mobility groups.
The documentation seems to be wrong in the case of 2504, i cannot find the redundancy button in the Wireless tab too, When i apply the Evaluation license redundancy is working.... did anyone else face the same Issue ?
Regards,
Vinui cannot find the redundancy button in the Wireless tab too
You mean AP SSO?
WLC 2500 will not support this feature. -
AIR-CT2504-HA-K9 N+1 redundancy config
Hi Experts,
After I read some documentation it is still not 100% clear for me what are the procedure to configure additional WLC controller we bought (
AIR-CT2504-HA-K9). What we need to achieve is just the basic N+1 redundancy. We have our existing WLC 2504 and 15 LAPs 1262.
Please advise if these steps are correct:
1. Backup existing config from primary WLC.
2. Upgrade backup WLC to the same OS version
3. Upload config to the backup WLC
4. Change all IPs - it should be different but on the same subnet as the primary one.
5. On the primary controller change AP redundancy settings - add IP of the backup controller.
6. Plug backup controller to the network and test failover by disconnecting the primary one from the network - after 2 minutes all APs should reconnect to the backup one.
7. If all good disconnect backup one from the network and all APs should fall back to the primary one.
Thanks in advance.
Regards,
Gleb.Thanks for this Scott,
additionally do I always need to update the config on the backup manually as long as there are some changes on the primary one?
not sure what this means as well, do I need to go through this step (figure 2.8):
An HA-SKU secondary controller can also be used as a primary, secondary, or tertiary controller. This
can be configured under the AP specific configuration.
Thanks in advance. -
Wireless Config for AIR-CT2504-5AP
Dear Team,
i have 2 * AIR-CT2504 with 10AP license each , both running on 7.4 verison
Can i convert 1 AIR-CT2504 manually with or without addition of license , since i am able to see any part for HA licenseYes. You can configure them individually.
-
One WLC AIR-CT2504-K9 for Main office and 3 Branches
Hi ,
I need to configure a WLC AIR-CT2504-K9 with the followings requiremets:
1.- There is a main officce where the WLC and 7 LAPs will be installed.
2.- There are 3 branches; one LAPs in every branch will be installed.
3.- SSIDs for internal users and guest will be the same in each office.
Is it possible to set this scenario ?? (see complete info in table)
In the past I configure some WLC 2100 but I noticed some difference with this new WLC-CT2504
one of the differences that kept my attention were regarding ap-manager interface (not shown)
and virtual interface ( shown as NOT SUPPORTED)
Should I set ap-manager interface or is enough with managment interface ?
why the message "Not support" in virtual interface ??
How can I use one port for two interfaces (as is proposed in table), if I try to do this a message error is displayed
"Error setting AP Manager interface".
iF I set one interface and associate to one port (Enable) I can not set second interface in the same port so remains disable
This model of WLC just has 4 Ports.
I have read last config guide but is not clear for me because there is no examples of this kind of scenario.Hi Scott,
I configured virtual interface from startup configuration wizard.
(Cisco Controller) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... d0:c2:82:e3:8e:c1
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
regards, -
AIR-CT2504-25-K9 (HA) Help needed
Hi all,
I got two AIR-CT2404-25-K9 and i need them in HA (Active/Passive) i would like to add a AIR-CT2504-HA-K9 but can someone tell me if i need one or two for an active/passive config.
Thanks for your help!2504 just does N+1 HA from 7.5, whereas the bigger platforms do AP SSO and Client SSO. And obviously , you need 2 AIR-CT2404-25-K9 for HA.
-
AIR-CT2504-5-K9 capacity adder license error
Hi, i have AIR-CT2504-5-K9, with 5 access point license support. I buy capacity adder license LIC-CT2504-5A for add 5 access points more. When i try download licence file from tftp server on WLC system i see message "License 1 Failed 1" on WLC. TFTP server message downloading OK.
In what could be the problem?As far as I'm aware, the 2500 can support 5, 15, 25, 50 or 75 APs. And here's where logic does not apply: So if you have WLC with 5 AP, the next adder license you can get is 15. If you need more, you need to get 25. And that's it.
So all in all, if you have a WLC with 5 APs, the highest you can get is 45 AP support. You cannot get another 25 adder license.
This is how it works. I know it doesn't make sense. I don't make the rules.
NOTE: One guy, George, was able to do something about this. He RMA-ed his WLC and they gave him the same model but modified some stuff that he was able to get the maximum. -
AIR-CT2504-50-K9 with out DHCP Static config
We have AIR-CT2504-50-K9 and AIR-CAP1602I-TK910 30 devices we want config trough controller to AP with out DHCP
#Yes, you can use internal dhcp server on WLC-2500 to lease IPs to the connected APs using L2/Broadcast, once AP gets an ip then you can make those IPs as static on those APs via check box from AP's general tab after it joins the WLC.
#Remeber, WLC dhcp doesn't support option 43, if the AP and WLC management are L3, be sure to use ip-helper at L3 for wlc discovery. Also, don't think AP may receive ip from WLC dhcp server when it is L3 and dhcp proxy is used instead of broadcast. -
AIR-CT2504-5-K9 has 4 Gig ports with a note "Access point directly connected to the controller is not currently supported."
So what is the idea for these ports? Just an etherchannel to provide 4 Gig of bandwidth or some other uses?Hello,
The ports on the 2500 can be used for multiple deployment scenarios. You can have port 2 be a backup port in case the connection on port 1 fails (redundancy). You can also send different vlan traffic out a different physical port (guest segment, etc). The 2500 does not support Link Aggregation, so you cannot configure the ports in an etherchannel bundle.
At this time, connecting APs directly to the WLC is not a supported scenario.
For additional details, please see the following section of the 2500 deployment guide:
http://www.cisco.com/en/US/products/ps11630/products_tech_note09186a0080b8450c.shtml#scenarios
-Pat -
AIR-CT2504-5-K9 data encryption
All,
I am looking important info , I am going to order AIR-CT2504-5-K9 WLC . with software AIR-CT2504-SW-7.6.
1) would like to check the image AIR-CT2504-SW-7.6 has a inbuilt DTLS ( datagram transport layer security ) ?? . like in WLC 5500 series the image SWC5500K9-74 DTLS (Datagram Transport Layer Security) for encrypting CAPWAP data packets is enabled in this image.
2) on the AIR-CT2504-5-K9 , shall I need to order additionally 2504 Data DTLS License LIC-CT25-DTLS-K9 ?
please let me know
Regards
LernerAs long as they ship you a 2504 that doesn't have the LDPE software version, or else you will have to obtain the free DTLS license and convert the image to a non-LDPE code.
https://supportforums.cisco.com/discussion/11421191/2504-wlc-dtls-license
Scott -
Hello,
I would like advised over this matter.
I have a WC 2504 with 3 AIR-LAP1141N-A-K9 APs. The network clients have increased by 90 wireless devices, and we are experiencing a noticeable drop in speed a peak time when all devices are connected. We are planing to add another AP. So far, we are using a Dual VPN Router to share internet network load at 100mbps/25mbps and 15mbps/5mbps.
Do we have to use the same AP model (in this case AIR-LAP1141) or can we use another AP model to balance the network load?.
Thank you very much for sharing your experience.
Respectfully.
Rudy RodasHi Rudy,
You do not want to go with same AP model.
I prefer you go ahead with a dual band (1600/2600/3600) AP model rather single band like you have at the moment.
Refer this for the WLC software compatibility with these AP models
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
HTH
Rasika
**** Pls rate all useful responses **** -
Is it a new WC or I missed it before? What is the price?
I am looking what are my options to set a wireless lab, have two 1242AG APs already and controller would be nice but prices are steep even for entry point (like most Cisco).
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.htmlThe cheapest 2106 which I can find is around $1k. Could you at least give me an idea if this thing new is priced higher or lower then 2106?
No I won't. There are so many things a 2100 can do that a wlc 2000 just can't/won't. You know somethings not right when the 2000 was quickly superseded. Sorry mate, I ain't going to recommend something that I personally won't use.
Do both, 2106 and 2504 have the same functionality?
Define "functionality". If you mean very simple, wireless here and there they do have the same functionality. If you want to go down the road of, for example, OfficeExtend then the this feature is only supported on the 2500/5500/WiSM-2.
I will never go over 5 APs so basic license looks more then enough in my case.There's only one feature license. The "license" in question is the number of AP the WLC can support. This is easily upgradable as your business requirements grow.
Do both support a network extension (Cisco 600)?
The new AP600 is supported on the 2500/5500/WiSM-2 only.
This 2504 is actually a bit strange product. Has 4 Gig interfaces but none are PoE and there is even a note
Never has and never will. Don't know with you but I don't agree with PoE and WLC in a box. This is because most deployment has the APs connected to a (PoE) switch.
Please don't forget to rate our useful posts. Thanks. -
WLC: AIR-CT2504-50-K9 Vs HP J9420A
Helloooo
I need to show the best in Cisco controller versus HP (HP MSM760 Mobility Controller) controller in point of Security and mobility and other
difference will make choosing Cisco WLC as a piece of cake.
So your help is needed, pleaseSalam Samer,
I have no idea about the HP product itself. But you can always check the datasheet of the product (2500 WLC) and compare the specs with the HP one.
Here is the datasheet of the 2500 WLC: http://goo.gl/dSLZbp
The price is not mentioned in the datasheet. That can be a basic element to decide the product sometimes.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you" -
I have 8 2504 controllers and each needs to have a minimum of 20 MAC addresses added. I would rather not add them one at a time but I don't see any features that allow for an import. Does any one know of a way to do the import?
If you have a WCS you could try to create a template with the mac address of all the wireless clients and apply it to all the WLC.
Sent from Cisco Technical Support iPhone App -
AIR-CT5508 wont upgrade to 7.6
Hi,
I wanted to see if anyone has had issues with upgrading to 7.6 images on their AIR-CT2504 or AIR-CT5508. I have one unit in the lab that refuses to update and I had a customer call me today with the exact same issue. Maybe someone from TAC has info if other users are having the same problems and can identify if this is an issue with 7.6 and to steer clear for the time being?
Logs:
(Cisco Controller) >
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.110.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
<output omitted>
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show boot
Primary Boot Image............................... 7.4.110.0 (default) (active)
Backup Boot Image................................ 7.3.101.0
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >!loading AIR-CT5500-K9-7-6-110-0.aes in the GUI now
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show boot
Primary Boot Image............................... 7.6.110.0 (default)
Backup Boot Image................................ 7.4.110.0 (active)
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >!reloading from GUI now
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
Updating license storage ... Done.
Restarting system.
WLCNG Boot Loader Version 1.0.16 (Built on Feb 28 2011 at 13:14:54 by cisco)
Board Revision 1.3 (SN: FCW1709L09H, Type: AIR-CT5508-K9) (G)
Verifying boot loader integrity... OK.
OCTEON CN5645-NSP pass 2.1, Core clock: 600 MHz, DDR clock: 330 MHz (660 Mhz data rate)
FPGA Revision 1.7
Env FW Revision 1.8
USB Console Revision 2.2
CPU Cores: 10
DRAM: 1024 MB
Flash: 32 MB
Clearing DRAM........ done
Network: octeth0', octeth1
' - Active interface
E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: STEC M2T CF 1.0.0 Firm: K1367MIX Ser#: STIM2MB513071013409
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
Press <ESC> now to access the Boot Menu...
Loading primary image (7.6.110.0)
100%
36110929 bytes read
Launching... <-- Right here it gives no error, just wont load 7.6 and moves to secondary image
Loading backup image (7.4.110.0)
100%
34513219 bytes read
Launching...
init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
starting pid 821, tty '': '/etc/init.d/rcS'
/etc/init.d/rcS: line 4: /mnt/bootsys/.core: not found
route: SIOC[ADD|DEL]RT: Network is down
mount: mounting /dev/cfa1 on /mnt/bootsys failed
Set PLX switch MPS settings .............!!!!!!!
Detecting Hardware ...
set smp_affinity for irq 48
003f
DP from CGE5.0 ...
starting pid 1071, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
Setting up ZVM
Exporting LD_LIBRARY_PATH
Cryptographic library self-test....passed!
XML config selected
Validating XML configuration
Read HA Config before validation
octeon_device_init: found 1 DPs
readCPUConfigData: cardid 0x6070001
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 7.4.110.0
Firmware Version FPGA 1.7, Env 1.8, USB console 2.2
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Initializing Licensing Services: ok
License daemon start initialization.....
License daemon running.....
Starting Statistics Service: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fastpath Hardware Acceleration: ok
Starting Fastpath Console redirect : ok
Starting Fastpath DP Heartbeat : ok
Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
Fastpath CPU0.00: Initializing last packet received queue. Num of cores(10)
Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
Fastpath CPU0.00: Core 0 Initialization and FIPS self-test: ok
Fastpath CPU0.00: Initializing Timer...
Fastpath CPU0.00: Initializing Timer...done.
Fastpath CPU0.00: Initializing Timer...
Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
Fastpath CPU0.01: Core 1 Initialization and FIPS self-test: ok
Fastpath CPU0.02: Core 2 Initialization and FIPS self-test: ok
Fastpath CPU0.03: Core 3 Initialization and FIPS self-test: ok
Fastpath CPU0.03: Received instruction to get link status
Fastpath CPU0.04: Core 4 Initialization and FIPS self-test: ok
Fastpath CPU0.05: Core 5 Initialization and FIPS self-test: ok
Fastpath CPU0.06: Core 6 Initialization and FIPS self-test: ok
Fastpath CPU0.07: Core 7 Initialization and FIPS self-test: ok
Fastpath CPU0.08: Core 8 Initialization and FIPS self-test: ok
Fastpath CPU0.09: Core 9 Initialization and FIPS self-test: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Management Frame Protection: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Licensing Services: LICENSE_PRINT:cnfgrCslLicense:ERROR:license request Failed for units: 500 rc:User failed to accept EULA
ok
Starting Redundancy: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting AVC Services: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting RF Profiles: ok
Starting Power Supply and Fan Status Monitoring Service: ok
Starting Mesh Services: ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server: enabled in CAPWAP
Starting CleanAir: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting RRC Services: ok
Starting SXP Services: ok
Starting Alarm Services: ok
Starting FMC HS: ok
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting PMIP Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server: CLI: ok
Secure Web: ok
License Agent: ok
(Cisco Controller)
Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
User: admin
Password:*****
User:admin
Password:********
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.110.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
<output omitted>
! Now If i try the FUS file AIR-CT5500-K9-1-9-0-0-FUS.aes it completes successfully and i reload from the GUI
(Cisco Controller) >
(Cisco Controller) >Restarting system.
WLCNG Boot Loader Version 1.0.16 (Built on Feb 28 2011 at 13:14:54 by cisco)
Board Revision 1.3 (SN: FCW1607L035, Type: AIR-CT5508-K9) (G)
Verifying boot loader integrity... OK.
OCTEON CN5645-NSP pass 2.1, Core clock: 600 MHz, DDR clock: 330 MHz (660 Mhz data rate)
FPGA Revision 1.7
Env FW Revision 1.8
USB Console Revision 2.2
CPU Cores: 10
DRAM: 1024 MB
Flash: 32 MB
Clearing DRAM........ done
Network: octeth0', octeth1
' - Active interface
E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: STEC M2T CF 1.0.0 Firm: K1367MIX Ser#: STIM2MB513071013409
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
Press <ESC> now to access the Boot Menu...
Loading primary image (7.6.101.2)
100%
6394630 bytes read
Launching...
Loading backup image (Image not found)
** Unable to read "linux.bak.img" from ide 0:2 **
** Launch failure **
============================================================
Boot Loader Menu
============================================================
1. Run primary image (7.6.101.2) - Active
2. Run backup image (Image not found)
3. Change active boot image
4. Clear configuration
5. Format FLASH Drive
6. Manually update images
!Now i am stuck in the Boot Loader menu and the unit wont even boot up. I used the RTOS files and recovered the unit several times trying to upgrade multiple ways but no matter what i try the unit will not boot with 7.6. It works perfectly fine with 7.4.
Anyone have ideas?
Known issue?
Other links with what seems like the same issue:
https://supportforums.cisco.com/pt/discussion/12130001/air-ct2504-upgrade-failure
https://supportforums.cisco.com/discussion/12060686/wlc-5508-upgrade-software-76
http://omgili.com/thread/.wHSUbtEfZS6sY9oec8tRj1DNafRV3e2EmgIsn2U7n.0aLwe7IPHyQaQO5o5MalitJoQnElOrK8-/Just to add to this, we hit the same problem with a 5508. Cisco TAC sent us the RTOS image which re-installed 7.0.116.0 firmware, however every time I run the 1.9.0.0 FUS I see the same problem: it's fully repeatable. I'm fully aware of the instruction not to run the FUS more than once and my first thought was that I had done that, however this unit has been in a data centre since before FUS 1.9.0.0 came out so I know that it hasn't had that installed. However we may well have installed FUS 1.7.0.0 - is it possible that having installed 1.7 then the 1.9 version screws it? A question for my TAC contact...
I've run the RTOS recovery now and I'm installing the 7.6.110.0 firmware, without re-running the FUS.
The currently installed Feild Recovery Version is 7.0.112.21 which looks like the pre-FUS 1.9.0.0 version...maybe the FUS is faulty.
Maybe you are looking for
-
Use the new functionality "multiple page size" in an indesign book
I've creating an indesign book, in wich one chapter has a different (bigger /A3) page size. Indesign creates the book in pdf using the bigger page size, and do not use the real page size of every chapters. Why? Thanks for help !
-
I have been trying to open raw files from my new Canon Eos, 60d but elements 9 tells my they are the wrong file type, I downloaded the camera raw patch to update things and I have that, but it will not install into the program, if anyone has any idea
-
Restrict TextInput to accept Floating point numbers
Hello Everyone I want to know how i can restrict my textInput field to accept a decimal values only.It should check for the following condition. It should allow a maximum of 8 digits before the decimal point and a precision of 2 digits,Sho
-
How to generate PDF file from HTML file using Acrobat API's
Hi, I want to generate a PDF file from an HTML file on server side(C# .Net). Their is a COM interop called "AcrobatWeb2PDF" availaible but could not find any document regarding how to use it. I cant use "Adobe live cycle PDF Generator" as we just hav
-
Squeaking sound on Satellite C655 S5048
I have been having trouble with the sound on my lap-top. I did not have this problem when I originally bought it back in 12/2010. The CDs play however when I play something from YouTube or iTunes it squeaks and crackles. I can't get any sound from