AIR-CT2504-5-K9 capacity adder license error

Hi, i have AIR-CT2504-5-K9, with 5 access point license support. I buy capacity adder license LIC-CT2504-5A for add 5 access points more. When i try download licence file from tftp server on WLC system i see message "License 1 Failed 1" on WLC. TFTP server message downloading OK.
In what could be the problem?

As far as I'm aware, the 2500 can support 5, 15, 25, 50 or 75 APs.  And here's where logic does not apply:  So if you have WLC with 5 AP, the next adder license you can get is 15.  If you need more, you need to get 25.  And that's it.
So all in all, if you have a WLC with 5 APs, the highest you can get is 45 AP support.  You cannot get another 25 adder license.
This is how it works.  I know it doesn't make sense.  I don't make the rules.
NOTE:  One guy, George, was able to do something about this.  He RMA-ed his WLC and they gave him the same model but modified some stuff that he was able to get the maximum. 

Similar Messages

  • Installing adder license

    I Want to install L-LIC-CT2504-5A (5 AP Adder Licenses for 2504 WLAN Controller (e-Delivery)) to my 2504 wireless controller which has the default 5 AP licenses only.
    The configuration guide says I should access the license file from a TFTP server. I got the license as a pdf document with the Product Authorisation Key.
    Question:
    Is this pdf document with PAK the so called license file that I have to access from the TFTP? If not then where do I get it?
    Thanks in advance!
    \\Kelvin

    So what you got is a pdf of the PAK, in which you have to go to the licensing portal to obtain your license for the WLC.
    https://tools.cisco.com/SWIFT/LicensingUI/Quickstart
    Once you fill out the information by entering your PAK and the WLC serial number, you will get an email with the license and be able to download the license file.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Anyone got the AIR-CT2504-HA-K9 to work on N+1 Redundancy ?

    Hi Guys,
    Seems like the new Part #AIR-CT2504-HA-K9 needs some kinda licensing...to work... otherwise the redundancy is same as it was ealier with mobility groups.
    The documentation seems to be wrong in the case of 2504, i cannot find the redundancy button in the Wireless tab too, When i apply the Evaluation license redundancy is working.... did anyone else face the same Issue ?
    Regards,
    Vinu

    i cannot find the redundancy button in the Wireless tab too
    You mean AP SSO?
    WLC 2500 will not support this feature.

  • Wireless Config for AIR-CT2504-5AP

     Dear Team, 
    i have 2 * AIR-CT2504 with 10AP license each , both running on 7.4 verison 
    Can i convert 1 AIR-CT2504  manually  with or without addition of license , since i am able to see any part for HA license 

    Yes.  You can configure them individually.

  • One WLC AIR-CT2504-K9 for Main office and 3 Branches

    Hi ,
    I need to configure a WLC AIR-CT2504-K9 with the followings requiremets:
    1.- There is a main officce where the WLC and 7 LAPs will be installed.
    2.- There are 3 branches; one LAPs in every branch  will be installed.
    3.- SSIDs for internal users and guest will be the same in each office.
    Is it possible to set this scenario ?? (see complete info in table)
    In the past I configure some WLC 2100 but I noticed some difference with this new WLC-CT2504
    one of the differences that kept my attention were regarding ap-manager interface (not shown)
    and virtual interface ( shown as NOT SUPPORTED)
    Should I set ap-manager interface or is enough with managment interface ?
    why the message "Not support" in virtual interface ??
    How can I use one port for two interfaces (as is proposed in table), if I try to do this a message error is displayed
    "Error setting AP Manager interface".
    iF I set one interface and associate to one port (Enable) I can not set second interface in the same port so remains disable
    This model of WLC just has 4 Ports.
    I have read last config guide but is not clear for me because there is no examples of this kind of scenario.

    Hi Scott,
    I configured virtual interface from startup configuration wizard.
    (Cisco Controller) >show interface detailed virtual
    Interface Name................................... virtual
    MAC Address...................................... d0:c2:82:e3:8e:c1
    IP Address....................................... 1.1.1.1
    DHCP Option 82................................... Disabled
    Virtual DNS Host Name............................ Disabled
    AP Manager....................................... No
    Guest Interface.................................. No
    regards,

  • WLC license error

    Hi ,
    One of my colleague purchased a 9 AP adder license for Cisco 2504 WLC.
    He has connected his Laptop directly to the WLC and trying to install the file via CLI. Connectivity between PC to WLC is fine, however he is receiving below error msg while trying to install that License file.

    Using the CLI to Install a License
    To install a license on the controller using the controller CLI, follow these steps:
    Step 1 Install a license on the controller by entering this command:
    license install url
    where url is tftp:// server_ip / path / filename .
    Note To remove a license from the controller, enter the license clear license_name command. For example, you might want to delete an expired evaluation license or any unused license. You cannot delete unexpired evaluation licenses, the permanent base image license, or licenses that are in use by the controller.
    Step 2 If you are prompted to accept the end-user license agreement (EULA), read and accept the terms of the agreement.
    Note Typically, you are prompted to accept the EULA for evaluation, extension, and rehost licenses. The EULA is also required for permanent licenses, but it is accepted during license generation.
    Step 3 Add comments to a license or delete comments from a license by entering this command:
    license comment { add | delete } license_name comment_string
    Step 4 Save a backup copy of all installed licenses by entering this command:
    license save url
    where url is tftp:// server_ip / path / filename .
    Step 5 Reboot the controller by entering this command:
    reset system
    Step 6 Follow the instructions in the “Viewing Licenses” section to see the status of the license you installed.
    Step 7 If the desired license is not being used by the controller, follow the instructions in the “Choosing the Licensed Feature Set” section or the “Activating an AP-Count Evaluation License” section to change the license that is used by the controller.

  • AIR-CT2504-5-K9 data encryption

     All,
    I am looking important info ,  I am going to order AIR-CT2504-5-K9    WLC . with software AIR-CT2504-SW-7.6.
    1) would like to check the image AIR-CT2504-SW-7.6   has a inbuilt  DTLS ( datagram transport layer security ) ?? . like in WLC 5500 series the image SWC5500K9-74  DTLS (Datagram Transport Layer Security) for encrypting CAPWAP data packets is enabled in this image.
    2) on the AIR-CT2504-5-K9  , shall I need to order additionally  2504 Data DTLS License  LIC-CT25-DTLS-K9  ? 
    please let me know
    Regards
    Lerner

    As long as they ship you a 2504 that doesn't have the LDPE software version, or else you will have to obtain the free DTLS license and convert the image to a non-LDPE code.
    https://supportforums.cisco.com/discussion/11421191/2504-wlc-dtls-license
    Scott

  • WLC Adder Licenses

    Hello,
    I have an AIR-CT5508-25-K9 WLC and a 25AP adder license L-LIC-CT5508-25A.
    As far as I understood, installing the adder license should provice an added 25AP to the already existing 25AP from the initial licensing. However, after installing the license I can still see a max count of 25APs instead of the expected 50.
    Could you please let me know if there is a flaw in my understanding of the licensing and if so please explain the adder license scheme for this particular case?
    Thank you,
    Barbara

    Hi,
    Here is the link to to the same.. please make sure tha twe are rebooting the system to take the chenges into effect.
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wp1880145
    Lemme know if that helps!
    Regards
    Surendra

  • App-V 5 Adobe Creative Cloud (CC) Enterprise Licensing Error 213:19

    Hello, I've posted this on Adobe forums but also posting here to see if anyone else has experienced/overcome this issue.
    I'm attempting to create an App-V 5 sequence for Adobe Creative Cloud Enterprise software, but I appear to be getting licensing errors when launching the App-V sequence.
    From what I understand in Adobe Create Cloud Enterprise, the licensing restrictions which tie the license to the machine have now been removed so that the base packages can be created with serial numbers and can be included within build images etc as opposed
    to creating a trial package and then using a serialization file at install/launch time.
    To start with I've created a package using the Adobe Creative Cloud Packager tool (CCP) for just the Illustrator CC application which includes the serial number. I've  then sequenced this package using App-V 5 SP1.
    When I run this app-v sequence on a test machine , Illustrator loads but I end up with a 213:19 error. Looking in the amt3.log the full error is 
    09/24/13 16:58:35:478 | [ERROR] |  |  |  | SLCoreService |  |  | 5624 | error deleting bad mkey:
    09/24/13 16:58:35:478 | [ERROR] |  |  |  | SLCoreService |  |  | 5624 | Could not load machine key
    09/24/13 16:58:35:478 | [ERROR] |  |  |  | SLCoreService |  |  | 5624 | License store synchronization took 14.6 ms and return "License Store Access Failure: Machine key cannot be deleted (213:19)".
    09/24/13 16:58:35:539 | [INFO] |  |  |  | ALM |  |  | 5624 | _time_: (func: ALM_License_SilentValidate, duration: 0.078 sec)
    09/24/13 16:58:35:539 | [INFO] |  |  |  | ALM |  |  | 5624 | _info_: ALM_License_SilentValidate return license status: Invalid and error: 213 : 19
    09/24/13 16:58:35:539 | [ERROR] |  |  |  | ALMService |  |  | 5624 | ERROR: License_Check error 213:19. (Errno = 2)
    I've tested out modifying permissions on the following folders within the app-v package under root but this has no effect.
    C:\Program Files\Common Files\Adobe\Adobe PCD\
    C:\ProgramData\Adobe\SLStore
    I've also tried creating a package using a trial licence and then using the adobe_prtk.exe tool to serialize the product at launch (startprocess event in userconfig file) with no success.
    Anyone tried this or have any ideas?

    Hello, thanks for the reply.
    I have read those articles (multiple times :-)) I've installed the required c++ redistributables on the sequencer and also on the test machines.
    I'm not getting any errors being reported in the App-V eventlogs.
    I initially used the adobe_prtk.exe tool to serialize the app-v application at launch via startprocess in the userconfig file as shown. This runs but it doesn't work around this issue.
    <UserScripts>
          <StartProcess  RunInVirtualEnvironment="true">
            <Path>[{AppVPackageRoot}]\..\Scripts\adobe_prtk.exe</Path>
            <Arguments>--tool=VolumeSerialize --provfile=[{AppVPackageRoot}]\..\Scripts\prov.xml</Arguments>
            <Wait RollbackOnError="true"/>
     <ApplicationId>[{AppVPackageRoot}]\Support Files\Contents\Windows\Illustrator.exe</ApplicationId>
          </StartProcess>
        </UserScripts>
    Following that I read that AAMEE 3.1 removed the (http://blogs.adobe.com/oobe/2012/09/aamee-3-1or-why-puffer-fish-is-a-delicacy.html) machine to license issue
    therefore allowing packages to be created using serial numbers and to be included within build images.
    As I'm packaging Creative Cloud (not CS6), I'm assuming this has been carried into the Creative Cloud Packager for Enterprise which now must be used.
    Any other ideas appreciated.

  • Licensing Error 6 After Clean Installing Mac OS 10.8.

    I think it might have something to do with the fact that I forgot to back up the Photoshop Elements Library and Application Support files...I can't find any of the stuff they reference in the Licensing Error 6 Troubleshooting guide.
    Is there way I can reinstall the application without having to buy it again? Do I need to give Adobe some information or something?
    Thanks in advance for the help.

    Okay, that never works. PSE isn't a tidy package like most mac apps. The installer strews stuff all over your hard drive like buckshot, most of it in places outside where apple says programs should install things. You will need to download and run this:
    http://www.adobe.com/support/contact/cscleanertool.html
    Then manually delete all the bits you can find. Don't just check applications, but also hard drive>library>application support, and your username>library>preferences. (Let me know if you don't know how to find these.)
    You will need to do a complete install. If you are talking about PSE 10 (which version is this, by the way?), you can download the trial and enter your serial number into that.

  • Getting a License Error while installing UFT 12.01 trial version

    Hi,
           I am trying to install UFT 12.01 trial version but its throwing a License error.  I am clicking on "Install License" and selecting "Seat License"  and clicking on "Next"  It says "License Type set successfully".
    But next time when i click on UFT icon on the desktop (after restarting my machine) it throws same License Error.
    Please find the attached screenshots. Please help me to get UFT installed properly.
    Thanks in advance.
    Asha

    Asha,
    You may want to try reposting your question on the forums specifically for the UFT product. Here's the link.
    http://h30499.www3.hp.com/t5/Functional-Testing-QTP/ct-p/sws-Fun_Test

  • Licensing Errors after recovering from Time Machine to an external Hard Drive

    My internal HD failed and I'm temporarily using an external drive as my primary HD. I loaded all my data from my time machine backup onto the external drive temporarily until my new mac arrives (next week). Now, I'm getting licensing error code 150:30 when I try to open Photoshop. It says rebooting can fix it. It has not fixed the issue. Any recommendations? I need to work on some files now and am stuck.
    Thanks!

    Yes. This is very common. Photoshop must never be migrated or transferred, because the license is tied to the Mac and moving it breaks the license.
    The cure is simple. Reinstall using your discs and don't forget to apply the updates. You will be starting at 11.0.0.
    Gene

  • I've just installed Mountain Lion 10.8.5, but now the CS programs are giving me a licensing error.

    I've just installed Mountain Lion 10.8.5, but now the CS4 and CS5 programs are giving me a licensing error. I've restarted. Uninstalled, reinstalled. And still, they don't work. I need to stay at 10.8.5 and not go to Maverick, per a client's needs at this time. Help!

    I've also tried this...that I found in another discussion...also did not work.
    Solution 1: Delete the FlexNet Publisher preferences folder
    -  Quit all Adobe applications.
    -  On your startup disk, locate and delete the following folder:
    [hard drive]/Library/Preferences/FlexNet Publisher/ 

  • I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes

    I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.

    Hi Stacey,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful with resolving the error you're seeing:
    iTunes Store: "An unknown error occurred (-9808)"
    http://support.apple.com/kb/TS2753
    Best,
    Jeremy

  • Weblogic Commerce Server3.5 license Error

    I have installed Weblogic Commerce Server3.5 on my Server today. I got the same
    error message when i try to start the server.
    Aug 21, 2003 10:19:22 AM CDT> <Error> <COMMERCE_SERVER_FRAMEWORK> <W646> <Admin>
    <main> <> <> <000000> <LOG_FATAL: WebLogic Personalization Server: Core Server:
    3.5 license error.>
    I have got a temp license. i copied and pasted in the group of the license.bea
    file. Is that the way i do?
    Plz let me know what is the solution for this error.
    I have installed Weblogic server6.1 with SP5 along with this server
    Thanks,
    Eshwer

    Hello Muffy,
    It looks like you do not have WLS 5.1 service pack 6 installed correctly. I
    say this because I do not see the sp6 message at the top of your log and I saw
    this message in your log:
    org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean" allows no
    further input; "transaction-isolation" is not allowed
    Ture Hoefner
    BEA Systems, Inc.
    2590 Pearl St.
    Suite 110
    Boulder, CO 80302
    www.bea.com

Maybe you are looking for

  • How do I add a favicon to my website through iWeb?

    Hello, I built my website through iWeb.  I am wondering if it is possible to add my favicon to my website through iWeb. Thanks, Lora

  • Ent-filename in HTTP adapter

    Hi... I have a sender file adapter and HTTP receiver adapter. In HTTP adapter, in the parameter "ent-filename" , I want to retain the name of the file that was picked. In Sender File adapter, I have checked the File Name under Adapter specific messag

  • DRQ: document date column vendor statement

    Hello! We request to implement to add "document date" column on "vendor statement" report. Now, even if it is "checked" in settings and it is visible on "supplier liabilities ageing" (screenshot z1) [z1|http://img130.imageshack.us/img130/2002/6122759

  • Unwanted blank pages inserted when creating pdf from scanner

    Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page  being scanned.  So, if scanning 50 pages, we get 100, etc.  How do we remediate this problem?  We have worked

  • Exporting "Movie to Apple TV"

    What format is this and is it a wise choice for long form media (16-minutes) or should I go with streaming? Out of curiosity, what is the best export format for a 16-minute video using QuickTime and which for Windows? I've noticed that exporting to W