Air Drop on 10.10.1 not seeing nearby Mac.

I was trying to send a few files from my Mac to the other Mac in the house using Air Drop.  This has always worked in the past but this is there first time it is being attempted after upgrading (both Mac's) to 10.10.1.
Airdrop is started on both Mac.  The other Mac can see my Mac but my Mac does not see the other Mac.   If the other Mac Air Drops a file to my Mac, the other Mac then shows on my Mac and the files is downloaded.  Then, on my Mac , if files are dragged onto the other Mac in Air Drop, the other Mac disappears and nothing is transferred.
Too wierd!
Any help??
Thanks,
Dave

Assuming this was working before the upgrades, then I would reinstall Yosemite on both computers, but do so one at a time testing Airdrop after the reinstall.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • Air drop visible, open, but can't see nearby computers

    I've tried to follow the other threads, but haven't seen an answer for this one:
    1. Airdrop icon visible in both sidebars (i.e. both computers support Airdrop).
    2. Both Airdrop windows open.
    3. Computers next to each other.
    4. Wi-fi max-bars on both computers.
    5. Firewalls off.
    6. Neither computer shows up in the other's Airdrop window.
    Any ideas please?

    Sam:
    For a Safe Boot, hold down the shift key after the boot tone, until you see the progress bar, then let go and let the compuer finish booting.  You should see "Safe Boot" in red on your login screen
    To rebuild permissions:
    Go to the Utilities folder in the Apps folder
    Run Disk Utility
    Select the "First Aid" tab at the top of the right window
    Select the icon for your boot volume (the one that has the name which usually appears at the top right of your desktop)
    Click "Repair Disk Permissions" at the bottom left of the right hand window
    After a few minutes, you will get a message "Permission repair complete."  There will usually be a number of warnings listed.
    Restart the computer, without the shift key this time
    Repeat with the other AirDrop computer
    Let me know if this fixes your AirDrop problem

  • Why cannot I not see my mac mail folders?

    Why can I not see my mac mail folders on my iPad?

    I also use MobileMe and yes it uses IMAP by default.
    Okay, it's simple than. The folders you've created are local folders which are not stored on the server.
    In order to change that open Mail.app select Mailbox->New Mailbox and make sure you choose MobileMe at Location.
    Now drag&drop your "On my Mac" mails into that new "MobileMe" folder. After a few min. they should be synced.

  • HT1600 I can not see my mac on my apple tv?

    I can not see my mac in the computers icon on my apple tv ? Home sharing is turned on, on both my apple tv and computer as well as ipad and 2 iphones? Any ideas?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Homesharing

  • I downloaded Lion on my MacBookPro and on my MacMini.  I have Air Drop on the mini, but not on the laptop. What am I missing?

    I downloaded Lion on my MacBook Pro and on my MacMini.  AirDrop showed up immediately on the MacMini, but is invisible on my MacBook Pro.  What am I missing?

    According to this Link
    http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBookPro3,1
    your MBP was Released between June 2007 and February 2008
    Air Drop compatible List
    http://support.apple.com/kb/HT4783

  • MY IMAC is from mi-2011; it should have the air play recopie video : I can not see it on my mac but air play is wirking only for audio; I can not watch the screen of my Imac on my TV Why?

    My Imac should be able to get the recopie video via Air play because it is from Mid 2011.
    Nothing work except the audio : Why?

    No way for us to know for sure (without similar product/issues) but the
    HP Support site suggests that with the current Mavericks OS X 10.9.x
    their drivers should be available through Apple Software Updates:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
    However that may be limited to certain models of printers or scanners that
    already had been known to be working under OS X as of that date in a
    prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
    •Drivers and Downloads for Printers, Scanners, & More - HP Support:
    http://www8.hp.com/us/en/drivers.html
    A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
    •OS X: Printer and scanner software available for download
    HP Officejet t65 All-in-One Printer
    {According to this page, your old printer has only Windows & Linux drivers
    but you may or may not look into third-party driver support through such
    sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
    •HP Support Forum - Home:
    http://h30434.www3.hp.com/psg/?lang=en&cc=us
    You may be able to get a deal on a new printer as they are rapidly obsoleted.
    PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
    Mac OS X 10.5: Included printer drivers
    Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
    but the Gutenprint lead may be helpful to locate whatever may exist; or not.
    https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
    Good luck & happy computing!
    edited

  • MBA 13" (Mid 2012) 10.8.2 does not see other Macs

    Hello all,
    for some time now I have a strange problem with my 13" MBA (Mid 2012 - latest version) on 10.8.2. THe MBA generally works very well, fast, and stable. My only issue is that I cannot see or connect to other Macs in my home WLAN network (this worked seamlessly under 10.8.1) or elsewhere. The other Macs do not show up in the finder, and neither can I connect with them manually (via "Go to server...").
    The only way to establish a connection is via creating a computer to computer network - which works perfectly but, of course, disconnects me from the internet which comes over wifi, so this is not a permanent solution.
    Even stranger, there seems to be a problem with ethernet connections (via thunderbolt ethernet adapter), too. This connection work seamlessly with one of my other Macs (running on Lion - 10.7), but does not work with my iMac running on Mountain Lion 10.8.2.
    I guess that something's wrong with the sharing routines on my MBA. Therefore I tried to install the 10.8.2 combo update but had to learn that this was not made for the 2012 MBA... :-(
    So, what to do? Should I try a reinstall of Mountain Lion?
    Any help would be appreciated.
    Thanks,
    Jan

    Hello medeostrike,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Best of luck,
    Mario

  • IBook G4 and Airport - does not see other Macs on network

    Hi. My iBook G4 (1 gHz, 768 meg, OS 10.4.10) has a networking issue. I can easily connnect online via the Airport card to our Belkin 54g router, to which my G4/733 and G5/2gHz are also connected (hard-wired). As I said, I can connect to the internet with no problem...but cannot see the other computers, nor print to a shared printer! And they cannot see the iBook! when I turn off Airport, and hook up the iBook with a wire, everything works fine, and everyone can see everyone else. This points to some sort of Airport setup thing...any suggestions?

    I don't have tiger, so I don't know how different it is from panther;
    so have you turned on the correct sharing in your sys preferences,
    have you created a computer to computer network (using airport),
    have you tried to connect using the network or _connect to server menu_ choice to one of the other computer that you have a user name and password for?
    It seems to take a minute or two for the other computer(s) to show up in the network window, so maybe you just aren't waiting long enough? or maybe it's a tiger difference.
    I just checked to see if I could connect myself to another computer here, using airport and a belkin 54g router. both computers are wireless G4 ibooks and I created a network, named it, and selected it from the drop down menu choice on both computers and I can access either one from the other, but I have to have a login name and password to do so. those have to be the same as one that is on the computer you are wanting to access.

  • Win7 does not see my Mac Drive?

    after buying a macbook pro for the first time i installed windows7 using bootcamp. i use autodesk inventor, but it seems i do not get this to work properly with parallels, so i am forced to use bootcamp and reboot all the time and switch between autocad for mac and inventor... now i have one big problem and that is that i need to be able to reach and open the autocad files on my macdrive/partition... but windows 7 does not show me the macdrive/partition. in disk management in windows it shows up, but the only thing i can do there is to delete the partition. also the partiotion does not have a drive letter? but again the only tas i can do to this partition is "delete"
    can some one tell me how to get this partition to show up under win7 and to use the files there
    thank you

    buurjongenshon wrote:
    can some one tell me how to get this partition to show up under win7
    MacDrive or [_*HFS+ for Windows*_|http://www.paragon-software.com/home/hfs-windows> should take care of that.
    JGG

  • Macbook Pro not seeing other Macs on network

    I have a network of 7 Macs. Some are connected with ethernet, some connect via Wifi. I have a Verizon router with a wifi transmitter and an Apple Airport Express. Both the router and the Express use the same network name. I have configured the Express to extend the first network. I use WPA security.
    I have file sharing and screen sharing enabled on all of the computers.
    Today a MacBook Pro (10.6.3) has had trouble seeing any of the other machines on the network. It can access the internet and send email, but it cannot access the server that has its TimeMachine backup drive, nor can I get it to see any of the other computers on the network.
    I have run Repair Permissions and re-started. I recently did do the latest OS 10.6 update which updated Java. (Java for Mac OS X 10.6 Update 2)
    What can I do to help this machine see the network?

    Yes, every Mac is on the same subnet. This machine is behaving strangely. The inability to connect to other computers went away and now is back. It has always been able to connect to the internet, but it still cannot connect to other Macs on the network.
    Would interference between the Verizon router wifi transmitter and an Apple Airport Express be a possible culprit?

  • Not seeing other Macs on network (but the G4 did)?

    My new Mac Mini is connected via ethernet to my FIOS router (same connection as my now-dead G4 tower which had OSX10.4.11).
    Internet connection on the new Mini is fine.
    Dear Daughter number one can print to the printer connected to my Mini with her MacBook on the wireless side of the network.
    But I can no longer see either her computer or her sister's Mac, which used to show up on my network on the old G4. Both of them are on the wireless side of the network.
    Any ideas on what I'm missing here? I'm going to do some more troubleshooting this evening and wanted to know where to start.

    Check on their Mac's System Preferences > Sharing > Services > File Sharing is On.

  • Air drop problem: My macbook can see the imac but not vice versa.

    Thats about it, When I open air drop on my imac i cant see my macbook but when i open air drop on my mac book I can see my imac, help?

    I had the same problem on my mac mini. 
    Makes sure your computer is on the following list.
    Only the following Apple computers are able to take advantage of the Air Drop feature:
    MacBook Pro (Late 2008 or newer)
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)
    iMac (Early 2009 or newer)
    Mac mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)

  • Ios 7 air drop not working with mountain lion air drop

    Hi, didn't see an iOS 7 forum, so I'm posting it here since I was testing it out on my iPhone 5.
    I tried to use air drop to share photos b/w my iPhone and my MBP running mountain lion, both has air drop enabled, but I couldn't see either on the air drop window.
    is iOS 7 air drop not compatible with OSX air drop??
    bluetooth and wifi are on for both machines.
    thanks

    I have a Logitech Ultrathin Keyboard Folio i5.  Also, even before reading your suggestions, I moved my phone hand set away from the iPad.  There aren't any other sources within 10 feet although the phone base is within 30 feet.  The WiFi router is about 5 feet away.  Haven't had a chance to "troubleshoot" the connection.
    Have you any suggestions for Air Drop or Air Print?  My Pixma MP 450 which in excellent working order isn't compatable with either OS 10.9.x or iOS 7.
    Canon suggested a Pixma MG 3520 which was hellatious to set up, requiring a big download and both a USB cable and Ethernet connection to the router, and isn't working with the iPad. 
    Clearly, technological "advancements" are for teeny boppers who spend their time taking phone pictures, sending mindless messages and listening to music.  Oh, to be 14 again.
    Sorry about the bitters.  Rare opportunity to vent to adults.

  • HT4623 Can't find icon for air drop on control center Ipad 4 ios 7.4 ?

    Can anybody tell me how to find the air drop icon  when it's not on control center  updated with 7.4 ios.

    iOS: Using AirDrop
    http://support.apple.com/kb/ht5887
    Message was edited by: Demo

  • PC does not see Mac on network

    I can see my PC shared folders on the Mac but the PC does not see my shared folders on the Mac, in fact it does not see the Mac at all.
    Does anyone have any idea what I am doing wrong?

    System Prefs --> Sharing --> File Sharing --> Options --> Share Files and Folders with SMB
    Then choose which user you want to allow access.

Maybe you are looking for