Air Installer file is damaged could not install

Hi:
I could not install a release build in Flash Builder 4 using latest release of air installer package:
The following is the log of the install in Windows 7
[2011-07-12:12:15:51] Application Installer begin with version 2.7.0.19530 on Windows 7 x86
[2011-07-12:12:15:51] Commandline is: C:\Users\George\Desktop\XX\_XC\XCG\BGDB.air
[2011-07-12:12:15:51] Installed runtime (2.7.0.19530) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-07-12:12:15:51] Unpackaging file:///C:/Users/George/Desktop/XX/_XC/XCG/BGDB.air to C:\Users\George\AppData\Local\Temp\fla462D.tmp
[2011-07-12:12:15:51] Package signature validation failed
[2011-07-12:12:15:51] Got an unexpected fatal error while unpackaging: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="invalid package signature" errorID=5022]
[2011-07-12:12:15:57] Application Installer end with exit code 7
I have another application developed in Flex Builder 3 and a release build with the same installer has no problem.
I appreciate you reading this and trying to help me

Try to download that again or disable the antivirus while downloading and after that enable it. Further try to run it in administrator mode if possible.

Similar Messages

Adobe Air I get this message: The application could not be installed because the installer file is damaged....

Every time I try to install new product through adobe air I get this message: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author. Kiran Kumar: May I have the product name and version you are referring to? I've looked over the online suggested repair which indicates to search for and delete Adobe Muse but when go looking for it, it doesn't seem to exist. How can I get this resolved?

Finally found a fix on my own....Wasted like 3 hours today. Hope this helps for anyone struggling with that stupid error message:

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried g

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.

K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

"Installer could not install some files in "/". Contact the software manufacturer for assistance."

What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

10.5.2 The Installer could not install some files in "/"

I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
I ran software update again to find that on trying to install i now get the message
Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
I then tried the same with the combo updater and got the same message
I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
Can anyone help??
Is anyone getting the same problem?
Thanks

I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

10.5.4 Update: The Installer could not install some files in "/"

I am unable to install 10.5.4 on my Intel iMac. I have rebooted multiple times, disconnected all external drives including my printer and tried the installer with no success. I have not found anything pointing to why on the forums. Any assistance would be helpful.
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version: 1.1f5
Thanks,

I am having the same issue, and a permissions repair did nothing for me.
I have attempted an install from software update, downloaded both the 10.5.3/4 combo update, and the 10.5.4 update and manually tried to install, each time with the same error: The Installer could not install some files in "/"

Safari 3.1 The installer could not install some files in"/"

I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
*_None of the checked updates could be installed. The installer could not install some files in"/"._*
*_Contact Software Manufacturer for assistance._*
After the iMac hung on the message and a "OFF button push reboot", I attempted to run Safari and the icon bounced once and the app did not run. "Safari Broken" couldn't surf the net.
I replaced the safari app file with an original 3.04 from a memory stick and rebooted and it ran the next time around.
Other attempts days later produced the same results. Safari Broken
Any method of correction? .

See discussion from Clearlake regarding Safari 3.1 failed installation...

Update problem" "The installer could not install some files in "/"."

I've been trying install the 10.5.3 update, but keep getting this error message:
"The installer could not install some files in "/". Contact the software manufacturer for assistance."
I tried software update AND downloading the update for manual updating to no avail.
Anyone know how to solve this?
Thanks,
Ron

I have never heard of this problem, but try repairing permissions with Disk Utility.

The .air installer file of my application is damaged.

Hi all,
I am a developer for a desktop application to be installed in windows and mac. The air file is signed and migrated to new certificated as detailed here (Adobe AIR 1.5 * Signing an AIR file to change the application certificate). But while launching the installer in windows, the installer fails with the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I have tried doing the following
- checked my date/time
- uninstalled/reinstalled the application
- removed the installtion folder etc.
But still the issue persists. Before failing, it also shows a dialogue that the "publisher identity is verified" - so I believe this issue is not related with codesigning/certificates, please correct me if I'm wrong.
Please let me know how to resolve this issue.
Thanks,
VivekS

You can execute a fixed number of iterations using a while loop by comparing the iteration count to the number of iterations you want and wiring the output of that comparison (e.g. Less Than or Equal To) to the continue (or stop) terminal of your while loop. Which comparison you use depends on personal preference, where you wire the desired count and the interation count, and whether you're using the while loop as Continue if True or Stop if True.
Ben gave you step-by-step instructions in response to your previous question. Look here for Ben's response.
Ben's response looks pretty good and detailed to me. It certa
inly deserved better than a 1-star rating.

The file aqq12s0m.sys could not be found during Win XP installation

When I try to reinstall XP pro I receive message "The file aqq12s0m.sys could not be found. press any key to continue." and when I press it, comp restarts.
Any clue about that file?

Hi,
is this the original recovery CD or a genuine Windows XP installation disk??
Following reasons for that problem:
- Disc is damaged or scratched or warped or simply not working
- CD/DVD drive has some problem
- Some piece of hardware does not work properly
- Memory could be faulty
Try to exclude these points and you will get the answer on that file.
Usually, such problem appears (I mean with a non-working file) when the CD is scratched or the drive does not work like it should..
Cheers

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

LSH error on installation server: Could not install DS as a service

Hi
we set up an installation server some time ago. In the past all users had administrative privileges therefore no LSH was necessary. Currently we are upgrading from Windows XP to Windows 7 and the users won't be admins anymore. That's why LSH is necessary now.
I tried to set the LSH up, but when I confirmed the DS und IS data in the LSH configuration, the following error appeared:
Could not install DS as a service
The server provides SAP GUI 7.20 PL 8
The installer version is 8.6.1.72 (latest!?) and reffering to note 1587566 didn't result in any solution. A similar problem is mentioned in thread LSH on installation-server fails with "Could not start DS as a service" but it doesn't help me either.
Did anyone figure out similar problems with LSH or knows a workaround/fix?
Kind regards
Jann

I looked into the logs and found the following:
14:00:38 NwSapsAtlC 1   Admin's choice: 'Configure DS'
14:00:38 NwSapSetUI 1
14:00:38 NwSapSetUI 1   UI: Show welcome page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:41 NwSapFeiUt 1E Security: failed to allow to replace process-level token
14:00:41 NwSapFeiUt 1   SERVICE Dep: RPCSS
14:00:41 NwSapFeiUt 1E Failed in call to CreateService in Create Error message: Der Kontoname ist unzulässig oder nicht vorhanden, oder das Kennwort ist für den angegebenen Kontennamen ungültig. Error code 0x00000421 (1057).
14:00:41 NwSapFeiUt 1E Failed in service creation
14:00:41 NwSapAdmin 1E ERROR: Could not install DS as a service.
14:00:41 NwSapSetUI 1
14:00:41 NwSapSetUI 1   UI: Will show finish page now...
14:08:16 NwSapsAtlC 1   Opening XML document 'C:InstServerSetup..SetupServerRecord.xml' (MS XML 3.0 SAX)
14:08:17 NwSapAdmin 1   Engine holds 3 registered event handlers
The password and user is definitly correct!

Adobe air installation file

I am trying to download caller id on my pc. This download needs the adobe air installation file in order for it to download.
I have adobe air, but when I download for the caller id to be installed I get this error message; "Application could not be installed because the installer file is damaged. Try to obtain a new installer from the application author". I noticed on the forum that a few members are having the same problem. If it has been solved, please pass it on to me.
Just an afterthought, I have Comcast triple play which includes the pc caller id. Comcast does not repair computers, therefore I'm hoping this forum can help me.
Thank you,
Teri Rossi

I don't quite understand. Do I have to post my question again in air installation forum. Or are you telling me it's been moved to the correct forum. I thought I did put my question in that forum. Please explain, I'm new here.
Teri Rossi

Air Installer file is damaged could not install

Similar Messages

Maybe you are looking for