AIR-LAP1131G rebooting

Hi
I am trying to install AIR-LAP1131AG to WLC 4202-12, it is joining to WLC and after few seconds it is rebooting , already WLC got 10APS they are working fine, but now i am trying to add 2 more APs to the WLC but both are having the same problem .. i am getting this this error message and it will roobots i thouhgt it might be IOS issue, but yesterday it joined to the WLC and downloded the IOS , but the same problem .. here the messages i am getiing
*Mar 1 00:00:36.473: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Dec 8 10:27:13.129: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE
Image info:
    Version Suffix: k9w8-.124-3g.JA2
    Image Name: c1130-k9w8-mx.124-3g.JA2
    Version Directory: c1130-k9w8-mx.124-3g.JA2
    Ios Image Size: 3420672
    Total Image Size: 3420672
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: C1130
    Wireless Switch Management Version: 4.1.185.0
Extracting files...
it gives this message then device reboots
*Mar 1 00:00:38.698: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:38.699: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Dec 8 10:31:29.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 8 10:31:29.304: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Dec 8 10:31:34.371: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Dec 8 10:31:34.485: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Dec 8 10:31:34.485: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
plz advise me how to do i add 2 more APs to the WLC
regards
Javahar

HI Scott
yes it is in the AP management IP subnet only and its joingin with the wlc with DHCP IP address, but it is showing this meggage and rebooting . and i reseted to the factory default , and i don't have access to the WLC,
Mar 1 00:00:36.272: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 10.17.36.214, mask 255.255.255.0, hostname AP0023.33bc.3174
*Mar 1 00:00:08.196: %SNMP-5-COLDSTART: SNMP agent on host AP0023.33bc.3174 is undergoing a cold start
*Mar 1 00:00:08.215: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:09.083: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:09.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:10.084: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:27.213: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:27.213: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:27.231: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Mar 1 00:00:28.995: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:29.033: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.996: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.techabcd.com"...domain server (10.17.36.22)
*Mar 1 00:00:36.535: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.17.36.214, mask 255.255.255.0, hostname AP0023.33bc.3174
*Mar 1 00:00:38.695: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.technicolor.com
*Mar 1 00:00:48.704: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer : Found the discovery response from MASTER Mwar
*Mar 1 00:00:48.715: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:48.716: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:49.716: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 13 08:12:49.293: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Dec 13 08:12:54.984: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Dec 13 08:12:55.094: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Dec 13 08:12:55.094: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
Please help me how to resolve this problem

Similar Messages

My macbook air keeps rebooting

my macbook air keeps rebooting... any ideas or suggestions on how to fix?

I have the same problem, did you ever get an answer to this?

AIR-LAP1131G and AIR-LAP1242G Latest WLAN Controller Compatibility

Would like to ask if below APs are compatible with WLC 5508 with current version of 7.0.240.0:
Cisco AIR-LAP1131G-A-K9
Cisco AIR-LAP1242G-A-K9

Yes they are supported in that version.
You want to check the release notes for AP support.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn7_0_240_0.html#wp784295
HTH,
Steve

Converting AIR-LAP1131G-A-K9 to LWAPP

I noticed that this AP was $350 as compared to the AIR-LAP1131AG-A-K9 which is $450. The latter comes with an A radio which I don't need. But it comes shipped LWAPP which is good. Can I convert the cheaper one to LWAPP?
The models are:
http://www.cdw.com/shop/products/default.aspx?EDC=873163
http://www.cdw.com/shop/products/default.aspx?EDC=1386702

Sure you can. First, download the LWAPP image and do the following:
Autonomous to LWAPP (Shortcut)
Requirements:
â¢ Image file (The recovery file has the prefix ârcvâ in the image name, such as c1200-rcvk9w7-tar.122-15.JA.tar);
â¢ AP is connected to the Wireless LAN Controller; and
â¢ AP can ping the TFTP server where the image is located.
Procedure
1. Copy the recovery file to the AP using the following command:
archive tar /x tftp:/// flash:
2. Let the AP boot on this image:
boot system flash://.bin
3. Reboot the AP.
OPTIONAL
â¢ DO NOT ALLOW THE AP TO JOIN THE WIRELESS LAN CONTROLLER.
â¢ IF POSSIBLE, type the following commands:
ï¾ clear lwapp private-config (This will bring the AP to factory default.);
ï¾ clear lwapp ap ip address
ï¾ clear lwapp ap hostname
ï¾ clear lwapp ap controller ip address
4. Let the AP connect to the Wireless LAN controller.
OPTIONAL
If an AP refuses to join the Wireless LAN Controller, type the following command from the AP:
lwapp ap controller ip address
Does this help?

MacBook Air keeps rebooting during backup to TC

We got an MacBook Air and a MacBook Pro in our household and just got a Time Capsule to make it easy to back up both computers using time machine.
I'm not impressed. TC is slower than I expected for a 802.11n networked harddrive. I get a little over 1MB/sec when writing to the disk. Anyway, it took overnight to back up the Pro but subsequent backup were of course faster.
I never succeeded to back up my Air. It starts backing up. One or two hours later when I check the status the computer has rebooted and backup stopped. This happened 7-8 times. I tried turning off wifi and using an ethernet connection to the TC. It keeps rebooting.
Anyone knows what's happening here or could give me a pointer to how I can diagnose it further?
Haavard

I have the same problem, did you ever get an answer to this?

IPad Air Spontaneous Reboots?

While I love my new iPad Air, I've had a number of spontaneous reboots over the past month, and wondered whether anyone else was experiencing anything like this. Tonight's most recent incident occurred less than six hours after performing a reset to factory defaults, then a restore from an iPad 3 backup, and happened when I clicked on a link in a spam email. The link opened Safari, I saw it was spam, and immediately went back to Mail to delete it, which caused an immediate spontaneous reboot that only took 10-15 seconds to return me to the login screen.
I've had a couple of these situations over the past month, and had assumed some pre-iOS 7 app was burping, which would eventually resolve itself with app upgrades. However, now I'm not so sure. The situation slowly worsened until this morning, when it blew up. Last night I played around with a new iOS 7 version of Flightradar24. This is a cool app that tracks hundreds of flights world-wide dynamically updating a global 3D map with their movements and info from their flight transponders. So, you can follow individual planes in flight, with their call sign, altitude, speed displayed from takeoff to landing. Anyway, I followed a few flights for a couple of hours with the app, quit and went to bed, leaving Big Clock2 running on the screen overnight. This morning, I quit the clock, and started up the Podcasts app to listen to a show during my workout, but Springboard's behavior seemed a bit odd, so I did a simple Restart to clear the RAM with the power button. That didn't help, so I then tried a hard reset (power + home button) to also clear the caches, which also didn't help. In fact, things got worse because I then couldn't even log in at the login screen because the swipe-to-login feature didn't work. Another hard reset finally allowed me to login, but then Springboard was missing a bunch of folders holding over a hundred installed apps. Settings showed the apps were still there, but they weren't being displayed. It didn't occur to me to try the Settings/General/Reset All Settings option to potentially force Springboard to rebuild its display preferences for installed apps, so I proceeded with the full iTunes Reset to Factory Settings option instead, and spent the rest of the day tweaking everything to my preferences.
Since this isn't a pristine rebuild, but rather a reset to factory settings + restore from backup option, I can't really tell whether I simply have some corrupted setting from my backup doing bad things, or an iOS 7 software or iPad Air hardware issue. So, I'm turning to the cohort of new iPad Air users for info.
So, have any of you new iPad Air users been experiencing occasional spontaneous reboots while using your iPad? These are quick reboots, taking only a fraction of the time common with a full startup from shutdown or from a hard set reboot process. It's too soon to query the Apple folks, since I can't force the behavior to show them. But, it is worrying. I don't really know whether I have a software or hardware issue yet. I'm guessing software, but even in that case I don't know whether it's app related or iOS 7 related.

Hi Dave,
Yes I have this on both my iPad Air and iPhone 5S. Both started same day I received and restored them from iCloud. My iPhone 5s was the first to be affected (as I received it first). I spend numerous hours with Apple performing diagnostics. We tried full firmware restores as well as a full replacement of hardware. Eventually I gave up with them as it is a very long processes to restore everything every time . I'm sure you are very familiar with that process. It's only a 10-15seconds to reboot although it's not really a reset. So I am waiting until they just fix it.
Now with my iPad it has since day one. I set up my camera to record the problem because it seems completely random.
So with that you are not alone. I'm not sure I have the patience to help on my on device as I think I've given them enough to move forward. I asked my Apple engineer rep today for an update.
I'll keep you posted.
Thanks, Gary

Macbook air can reboot, but not shutdown+boot :-(

Hi.
My MacBook Air (1st generation from 2008) does not start anymore. Only a white screen with a question mark. I booted from USB-DVD and checked the hard disk: some errors. So I formatted the hd and re-installed Snow Leo. As long as I reboot, everything is fine. The disk utility shows no errors.
However, when I shutdown and try to boot, I only see the white screen with question mark. Resetting the PRAM leads to the same state: Directly after reset, it boots. When I shutdown, it doesn't boot.
Any ideas? :-(

Hi Tim, I did not understand it completely before, sorry to ask you twice.
This looks bad.
The safe boot does not work either I suppose (http://support.apple.com/kb/TS2570).
Better go to Apple repair.
I am afraid this is some hardware failure.
Lex

Macbook air keep rebooting

Hi, I just bought macbook air 2 days ago, and installed couple of application from apps store, and now its keep rebooting. Anybody know how to fix this? it started when the cursor didnt response, and i restarted it.

I've experienced this issue as well. After completing a sync with dot Mac, I disabled iDisk, autosync with dot Mac, and then deleted the MBA from my list of sync'd computers with dot Mac. That seemed to help for a while, but the problem resurfaced shortly there after. As an experiment, I completed the steps noted above, with the exception of deleting all synced computers from the dot Mac list. This has solved the problem on my end.

Ipad Air random reboot on ios 8.0.2

I purchased a brand new Ipad Air, and upgraded it to ios 8.0.2. Since then, I am facing random reboots, after seeing a blue screen for a split second. I took it to the service centre, where they clearly said that it is an OS issue. When is the patch for this coming up. Is it really an OS issue?

I Have faced the same issue today. Checked the diagnostic report and found the following error
{"bug_type":"110","os_version":"iOS 8.0.2 (12A405)"}
Incident Identifier: 26369F39-B32E-45FA-8F55-22E129BD4D79
CrashReporter Key:   af0910b78f0969f0e25d7cba967a36d86ea20941
Hardware Model:      iPad4,2
Date/Time:           2014-10-07 00:27:42.474 +0530
OS Version:          iOS 8.0.2 (12A405)
Debugger message: WDT timeout
9s ago: 0b50 0f9fd0ce63 0r1f54000 0m0/1
OS version: 12A405
Kernel version: Darwin Kernel Version 14.0.0: Thu Sep 18 21:51:01 PDT 2014; root:xnu-2783.1.72~23/RELEASE_ARM64_S5L8960X
iBoot version: iBoot-2261.1.68
secure boot?: YES
Paniclog version: 3
Kernel slide:     0x000000001dc00000
Kernel text base: 0xffffff801fc02000
Epoch Time:        sec       usec
Boot    : 0x54278a5c 0x00000000
Sleep   : 0x5432d8a3 0x0009a62d
Wake    : 0x5432daa3 0x000b3020
Calendar: 0x5432e611 0x00018080
Total cpu_usage: 16976620
Thread task pri cpu_usage
0xffffff80012a05e0 syslogd 31 0
0xffffff80009b6ac0 kernel_task 0 5280622
0xffffff80009c1800 kernel_task 0 5184090
Panicked task 0xffffff8000998b20: 61774 pages, 159 threads: pid 0: kernel_task
panicked thread: 0xffffff80009c1800, backtrace: 0xffffff8020097a20
   lr: 0xffffff801fcdb44c fp: 0xffffff8020097a80
   lr: 0xffffff80202b5cc8 fp: 0xffffff8020097f60
   lr: 0xffffff8020cdb20c fp: 0xffffff8020097fd0
   lr: 0xffffff801ffedd4c fp: 0xffffff8020097fe0
   lr: 0xffffff801fcd126c fp: 0xffffff8020097ff0
   lr: 0xffffff801fcd9a58 fp: 0xffffff80a9df3ca0
   lr: 0xffffff801fcd83a0 fp: 0x0000000000000000
********* Dumping thread state and stacks *********
Task 0xffffff8000998b20: 61774 pages, 159 threads: pid 0: kernel_task
thread 0xffffff802011e150
kernel continuation: 0xffffff801fc9bac4
>>>>>>>>thread 0xffffff80009c1800
>>>>>>>> kernel backtrace: ffffff80a9df3ca0
>>>>>>>> 0xffffff801fcd83a0

IPad Air 2 rebooting

Today I unpacked my new iPad Air 2. Plug it in iTunes and click on restore from iPad Air.
The iPad Air was on 8.1.2 and the new one was on 8.1, so it asked for upgrade, said ok do it.
After that iPad Air 2 started to reboot constantly showing also a red screen curtain appearing from time to time.
Cannot connect with iTunes, and I cannot switch it off.
Please tell me what to do.
Thanks in advance.

Did you try logging into iCloud from a computer & turning it off that way:
iCloud: Remove your device from Find My iPhone

Macbook Air constantly rebooting after installing Mavericks... this was my fix

Just in case this helps anyone.
I installed Mavericks on my Mac without an issue. When it restarted, my Mac would constantly reboot after a few minutes. It didn't matter if I logged in or not. I tried the various things that have been suggested (reset NVRAM, CMOS, running a disk check) but nothing help. If I booted into safe mode, I would not have any problems.
The issue ended up being some systems extensions in my /System/Library/Extensions folder. I had installed and deleted Trend Micro Smart Surfing a while ago by using the manual uninstall (move the application to the trash) which leaves the system extensions it had added intact (there was a Trend Micro folder in /System/Library/Extensions).
I reinstalled the software and then used the uninstaller that came with the program and after I rebooted, everything worked fine. I checked the /System/Library/Extensions folder and could see that the Trend Micro folder had been removed by the uninstaller.
I would suggest looking at the /System/Library/Extensions folder and comparing to what is in the applications folder. If you something in the extensions folder but not in the application one, you might be having the same type of issue that I was having.
Alex

Startup your Mac while holding down the Command + R keys so you can access the built in utilities to repair the startup disk and restore OS X using OS X Recovery.

IPad Air keeps rebooting itself

Updated the software the other week when prompted to but ever since then you can be half way through stuff and it reboots itself back to the apple logo and then comes back on.
Very annoying

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Macbook air wont reboot after I just did the latest update. Any ideas?

I just ran the latest update on my macbook air and now it wont boot up. I just get a spinning wheel and the apple logo. Is there something I can do?

When was your MacBook Air first sold? MacBook Air computers sold between June 2012 through June 2013 with 64 or 128 GB SSDs are known to have a high SSD failure rate and Apple is replacing them for free.
http://www.apple.com/support/macbookair-flashdrive/
See http://support.apple.com/kb/TS2570 for steps you can take if the SSD is still alive.
If these steps do not help take it to an Apple Store for a free diagnosis and estimate of repairs.
If the SSD has failed and your Mac does not qualify for a free SSD replacment, you can replace it yourself.
OWC sells 120, 240 and 480 GB SSD upgrades for MacBook Airs. A 240 GB upgrade costs $265. http://eshop.macsales.com/shop/SSD/OWC/ .

Macbook Air Not Rebooting

I have a problem with my macbook air and I thought I would post it. It doesn't happen with my macbook pro or iMac or any other older macs in my home. When I go to shut down my macbook air, it closes all application including the finder and then just sits there. There's a circular object going round and round in the middle of the screen, but that's it. I have to physically turn off the Macbook air by pressing and holding the power button. This has happened at least 3 time to me since I got this computer and I wanted to know if anyone else is experiencing the same thing.

I've experienced this issue as well. After completing a sync with dot Mac, I disabled iDisk, autosync with dot Mac, and then deleted the MBA from my list of sync'd computers with dot Mac. That seemed to help for a while, but the problem resurfaced shortly there after. As an experiment, I completed the steps noted above, with the exception of deleting all synced computers from the dot Mac list. This has solved the problem on my end.

Upgrading to 10.8.4 from 10.6.8 bricked the MacBook Air on reboot

Hi-
I just tried upgrading from 10.6.8 to mountain lion via the App Store download and it appears to have broken my computer. It went through the osx download screen before the entire screen turned white, displaying a rather broken looking blue loading bar sort of intersecting a spinning wheel animation in the center of the screen. I am afraid to turn it off / do anything in case it makes it worse. It has been over two hours now and I have work tomorrow/ apple stores are all closed in my area. Any suggestions?
Thanks!
Lkroo

If the system is stuck in this screen, then you will have to force it to shut down or restart, and then boot it to see where it is in the boot process. Do you have a backup of your system at all? Hopefully it will boot normally and allow you to attempt the installation again.

AIR-LAP1131G rebooting

Similar Messages

Maybe you are looking for