AIR-LAP1142N: Password required, but none set

Hello!
We have a problem with AIR-LAP1142N access points.
AIR-LAP1142N-E-K9
Version 12.4(21a)JA
LAP's are not assotiated with controller yet.
They get the ip address via dhcp, they are reachable by icmp.
When I try to telnet, I get
Password required, but none set
Is there any chance to get access to them without using serial port?

1. in general the AP do not responmd to telnet or ssh, but this depends on the state of the AP and the controller settings
I am not sure what state a Defaulted AP is in ...
2. Normally the AP must resolve, via DNS, the record cisco-capwap-controller.YOURDOMAIN.COM
så make sure you have this in your DNS for that AP (i.e. might be the DNS that the DHCP provide with the IP)
But this link to CCO, provide you info on how DHCP option 43 can be used.
(I find the DNS record much more suitable and easy to use)

Similar Messages

2960S - Password required, but none set

Hi,
I set a password for the 'VTY lines', the Console, I set an 'enable secret' and an 'enable' password,
but when I log in via ssh I get this:
Switch15>en
Password required, but none set
Password:
Switch15#sh run
Building configuration...
Current configuration : 28178 bytes
I type in the 'enable secret' and get into the enable mode...
I always get this "Password required, but none set"! But all passwords are set.
It's a WS-C2960S-48TD-L with IOS Version is 15.0(2)SE2 (C2960S-UNIVERSALK9-M)
What am I missing?
Kind regards,
Andreas

If you are trying to use the RADIUS authentication there are additional steps, here is my setup and I'm running 15.1(1)SG1
aaa new-model
aaa authentication login vtylogin group radius local
aaa authentication login conlogin group radius local
aaa authentication enable default group radius enable
aaa authorization console
aaa authorization exec vtylogin group radius local
aaa authorization exec conlogin group radius local
radius server RADIUS
address ipv4 x.x.x.x auth-port 1645 acct-port 1646
timeout 3
retransmit 3
key xxxxxxxxxxxxxxxxxxxxxxxxx
ip radius source-interface vlan200
line vty 0 4
exec-timeout 0 5
authorization exec vtylogin
login authentication vtylogin
transport input ssh

Java plugin for business objects not found. When trying to modify a business objects query, it says a plugin is required but none are found. What do I need to do?

I downloaded firefox 4.0 and attempted to use business objects. A screen comes up saying that a plugin is required but when I click on the screen, it say's no plugin is found. I am using the latest version of Java but it seems that the plugin is not there.

There is workaround.
Enter “about:config” in the browser’s address bar.
Search for “html5.parser.enable”.
Double-click the row to set the value to “false” (row should also go bold to indicate change).
There is a possibility that it may cause HTML5 compatibility issues down the road but it solved the issue.

Setting up a new TC. Everything went fine. I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC. All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router. I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC. The TC fired up found tttttttthe internet connection, and glowed green. I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os. All devices connect with the internet via the Airport device. they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet. When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
Any suggestions?

Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
What is this router?? Is it the TC or a router supplied by the ISP?
It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
On the airport utility open your TC by clicking it then clicking edit.
Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
And make sure Network is set to DHCP and NAT.
Please give me the screenshots of the same things from your setup.

I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!

I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!

This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

Tryng to set up Aple ID on wifes iph 6, she's forgotten her password. At iforgot I type in her gmail ID and ask for email but none comes ?

trying to set up Apple ID on wife's new iphone 6, she's forgotten her password. At "iforgot.apple.com" I type in her gmail ID and ask for email but none comes ?

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I finally got my ipod touch (5g) n was able to restore it on itunes but the problem is it requires the apple id that the thief has linked to it n its password for me to set it up...is there other way to set my ipod up without entering the apple id n passw

I finally got my ipod touch (5g) n was able to restore it on itunes but the problem is it requires the apple id that the thief has linked to it n its password for me to set it up...is there other way to set my ipod up without entering the thief's apple id n password??

- Make an appointment at the Genius Bar of an Apple stor and see what they can do. Make sure y have proof that the iPod is yours. The iOS 7 activation lock is working
Apple Retail Store - Genius Bar

Backup restoration password required keeps appearing but server error 404 will not let me set up password. This is on my screen every day!!

Every time I open my computer I have this notice: Backup restoration password required. In order to perform backup or restoration for this account, you need to enter the account password.
Not knowing my password, I click on "Forgot Password" and that's when I get the message "Server Error-404 - file or directory not found." This is driving me crazy and I hope you can help me.

Every time I open my computer I have this notice: Backup restoration password required. In order to perform backup or restoration for this account, you need to enter the account password.
Not knowing my password, I click on "Forgot Password" and that's when I get the message "Server Error-404 - file or directory not found." This is driving me crazy and I hope you can help me.

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2 icloud just

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

Need to be able to type in a colon(:) in the Email line of setting up my ntlworld mail account. Able to put in a colon in the Name or Password line but not allowed in this line as presumably who ever heard of an email address with a colon.

How can I insert a colon(:) when setting up my ipad mini for a New Account ? (Mail, Contacts, Calendars to Add Mail Account to New Account)
Virgin media require a colon as part of the Email line . I can put in a colon on the line above or below ie Name or Password line but not this line

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I just got a new ipad air, and it's tell me to connect to a network...I've chosen my network at home...it's asking for a password, and I've put the password in, but there isn't a button that allows me to hit enter and accept the password.

I just got a new ipad air...it's telling me to connect to a network...I've chosen my home network, which requires a password...I put the password in, but there is no button to press to accept the password. Can someone help me get past this roadblock?

You need 8 characters or more to connect.

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turn

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks

You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk

How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

AIR-LAP1142N: Password required, but none set

Similar Messages

Maybe you are looking for