AIR not starting on OS X

Hi
I'm running under OS X 10.9.5 and I can't run any AIR app anymore.
I've see this topic :
Adobe Air not working on Mac since OS X Yosemite upgrade
But compiling my apps with either the latest AIR SDK 15 or AIR SDK 16 beta doesn't change anything.
I've also seen a topic on stackoverflow where someone add a similar problem because of the use of FlashBug extension for Firefox:
I also have that extension installed but I renamed all my m.cfg files to mm_backup.cfg file but it did not solve the problem.
Wether I try to start an app from Flash builder (Run as desktop app) or by launching a released app or by using the adl command, it just fails silently...
What could be the reason of my problem ?
Thanks
Thomas

If you can boot, yes, eject the install disc and put a DVD in and try to save what you can, if you have another Mac you can try Target Disk Mode and transfer your data to the other machine. If you can't boot, or get into TDM, then you will have to do the A&I. If I understand you, you say that that's not an option, so if you have to erase completely, you should choose Mac OS extended (journaled).
Let me know how you make out,

Similar Messages

Macbook Air not starting at all

Hi,
i have a MacBook Air 11" (mid 2011), purchased in Australia.
the other day I powered it down, unplugged the power, re-plugged, and it won't start at all.
no beeps, no fan noise.
Green light on the Magsafe connector.
Magsafe power works on a different Macbook.
checked Magsafe connection for dirt/debris.
tried with battery unplugged.
tried with SSD out.
tried SMC reset.
ordered and installed a new I/O Board.
i left it unplugged for a week.
still nothing,..
when it has power connected, the top/middle of the keyboard is warmer than the sides, indicating that power is getting in.
Unfortunately i'm in Mallorca, Spain, with no Genius bar available and only 3rd party repair shops.
So before I head off to be quoted an exhorbitant amount to replace the main board, are there any other magic suggestions out there ??
thanks in advance!

Back up all data before making any changes.
If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
If there's no improvement, or if you're not aware of having installed anything that fits the description, post again.

Ipad air not starting..

My safari stopped working, so I did an update, and now the Ipad won't start at all...did a re-store, and still nothing. HELP!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281http://support.apple.com/kb/TS3281

Adobe Cloud window and adobe air not showing up or starting even though it is installed, i have tried reinstalling/uninstalling

I downloaded muse cc 2014. It worked fine for a while (couple of bugs though). Yesterday it would crash whenever it was launched. So i tried to uninstall and re-install. No Luck. Then noticed adobe cloud/adobe air windows were not starting up as per usual on startup and i have been through pc to try to locate and start manually. No Luck with them either, so i have been trying re-download manually, i download the CC exe and try run it from c:drive but no response - not running.
i have tried a restore and that hasnt helped. I have uninstalled all muse versions but now cant re-download it!?
where to from here, urgent help would be appreciated. Thanks

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

I want to install a hp laserjet pro cp1525nw with ox mountain lion . I dowload the drivers in the apple site but when i try to add a printer , my mac book air do not start the research. nothing happen . Can you help me?

I want to install a printer hp laser pro cp1525nw on my macbook air with mountain lion 10.8.2 . I download the drivers from the apple site and install them . I resart the macbook . I just can not add a new printer . the computer dos not start a research
Can you help me?

hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I could not add the printer and could not get the printer to join my network, I found this post at HP discussion and it worked!
Each printer has different options/settings but it seems like the general idea should work ok if you can reset printer back to factory settings and find Printer IP Adress.
This is for HP printers
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. With your the computer backyour wireless network network, you can re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim

My iPad air would not start. Only show the apple logo then no reaction after that.

My iPad air would not start. Only show the apple logo then no reaction after that. This is already the 2nd time. Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem. It happened less then 30 days and same problem again. Can someone please send me the hard-reset step so I can try myself before I send back to the service center again? thanks

Here's the hard reset info:
http://www.hard-reset.com/apple-ipad-hard-reset.html
Post something about what happened with your visit.

Mac air giving a beeping sound and is not starting

I was working in the morning and kept it in sleep before i went to bath. After that when i again wanted to start my mac air its giving out a beeping sound and nothing else is working. Mac is not starting up

Did you do a complete shutdown? If so, and it's not starting up at all (no chime, dark screen) then it has died. Please make a Genius Appointment and take it in for service.
Intel-based Mac Power On Self Test RAM error beeps
MacBook Air- Computer starts up with 9 beeps (won't boot into OS X)
Power On Self-Test Beep Definition - Part 2

My email preview pane is blank on my Air. Not on my iPhone or my iPad. Just the Air. Started two days ago. I didn't change anything. I can double click and open the email.

My email preview pane is blank on my Air. Not on my iPhone or my iPad. Just the Air. Started two days ago. I didn't change anything. I can double click and open the email.

Back up all data. Rebuild the mailbox.

Adobe AIR Application Installation will not start

I purchased a program called Video Alchemy which requires Adobe AIR to run but the installation window will not display and the installation does not start.
The Adobe AIR log install log file can be found here https://dl.dropboxusercontent.com/u/59423416/Install.log
Here is a link to the VideoAlchemy.exe install file https://dl.dropboxusercontent.com/u/59423416/VideoAlchemy.exe
Can anyone help me to get this program to install?

Thanks for the reply and solution MrSykes.
I uninstalled adobe AIR and ran a file and registry cleaner to delete any left over files and installs.
Then installed the v.15 Adobe AIR beta as recommended.
The cleaners I used (ccleaner & jv16 power tools) did find some temporary install files and remnants of the Video Alchemy install.
Tried the install again and still no installation window displays.
I'm running Windows 7 on my PC and even changed the installation file compatibility to Windows XP service pack 2 to no avail.
Funny that it installed fine on my notebook with Adobe AIR latest version running Windows 7.
I'm watching task manager as I'm attempting the install and videoalchemy.exe has some cpu usage then drops to zero activity.
Then Adobe AIR application Installer starts up then cycles to zero cpu activity.
I'm stumped on this one :-(
Thanks again for investing the time on my behalf.
Regards
Stephen

IOS 8 beta - Air apps not starting on iOS8

Hi there, I had some old apps released using AIR sdk 3.4 back in Sep 2012, and because they were working fine, I never updated with newer AIR sdks.
Today I installed iOS 8 beta on my ipad mini and tried out my apps and all the Air apps are not starting at all, just blank black screen.
On the console this is the message:
Jun 30 21:41:14 KHUNDAGAs-iPad com.apple.xpc.launchd[1] (UIKitApplication:net.asuult.radio969[0xaac8][414]) <Notice>: Service exited due to signal: Killed: 9
Jun 30 21:41:14 KHUNDAGAs-iPad SpringBoard[43] <Warning>: Application 'UIKitApplication:net.asuult.radio969[0xaac8]' quit via signal.
I wonder, is it because my Air sdk used is older, 3.4, or are there any other issues about iOS 8 that I am not aware of?

Hi,
Yes, there have been significant differences since we released AIR SDK 3.4, we recommend try building your app with latest AIR SDK (14.0.0.110) and see if that solves the problem.
-Thanks
Pahup

HT1414 My iPad Air, 32 gb will not start up. It had 97% battery charge, last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad Air won't start up. The iPad air is one

My iPad Air, 32 gb will not start up. It had 97% battery charge,last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up. The iPad air is one week old. Bummer, eh?

Auld Dave wrote:
. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life.

I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.

SheilaArl wrote:
I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.
I have a 2007 Macbook, so it's probably a lot older than your Macbook Pro, but it sounds like what happened to me, except that mine hadn't travelled anywhere. I pulled out the ram and blew out some dust, popped them back in, and wha-la! it turned back on and worked better than ever! Or otherwise you've got a dud/old/warped/fried battery, which is also what happened to my laptop - it got so bad it did what your laptop is doing. Ordered a new battery online and all good since then. Or otherwise, like the previous post asked, 'is it plugged in?'

My macbook air does not start! I press the on key and nothing happens.

my macbook air does not start! I press the on key and nothing happens.
this morning when I took my macAir it would nt start and when I pluged it, there was no light indicating a charge.
I checked the charger on my wife's mcAir and it worked.
I plugged it back to mine and the orange light came.
since a few hours, the plug is on with the orange light on, and still I cannot start the computer. Nothing happens!
help!

Try a SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
This process helps correct these power issues.
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

Canoscan Lide 200 will not start

After upgrading to Yosemite, when I plug in my USB-driven Canon scanner (into my Macbook Air from 2010) I get an error message advising that "a problem" occurred. Anyone else finding that a Canoscan Lide scanner will not start in Yosemite? Any suggestions as how to fix this situation? Thanks in advance.

Many thanks as well from me.
I was having a similar problem after upgrading to Yosemite with a USB CanoScan LiDE 700F. Don't think I had to install any drivers under Mavericks. Under Yosemite it just appears dead. Nothing ever happens. But, did see this error in Console whenever I plugged in the scanner. Then via a search found the above post.
For the LiDE 700F files are at:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide_700f#DriversAndSoftware
Console details for Canon IJscanner2 crashes :
Process:               Canon IJScanner2 [15959]
Path:                  /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2
Identifier:            jp.co.canon.ijscanner2.scanner.ica
Build Info:            ScanningCanon-1~1
Responsible:           Canon IJScanner2 [15959]
Library not loaded: /Library/Printers/Canon/IJScanner/Frameworks/CIJSDA.framework/Versions/A/CIJSDA
Referenced from: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2

"Layer 1 does not start with a new cell" replicator error

Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
Dusty

Thanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty

AIR not starting on OS X

Similar Messages

Maybe you are looking for