Air play is very slow

Why is air play working so slow?

Hello Michaelloguerico,
We've an article that provides some useful information and troubleshooting steps which can help get AirPlay back up to speed.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Allen

Similar Messages

My ATV plays music very slow (AirPlay)

My Apple TV 2 plays music very slow. I streamed my music from my iPad to my Apple TV using AirPlay. My music was deeper and slower than normal and some beats were missing.
I need help 8-/
FrischerToast

Welcome to the Apple Community.
Possibly network issues, but I'd begin by restarting all your equipment including the router and trying again.

Ipad Air & Ipad mini very slow loading websites

Hi all
Im experiencing very slow website loading issues on my Ipad air and my daughters Ipad mini retina. When this occurs the devices even stop loading the site completely. When i open the same site on iPhones 4s or iMac it loads instantly, WiFi is provided by 2 AirPort express stations, since iPhone & Imac load instantantly. During these issues speedtests on both Ipads are showing download speeds in the range of 44 mb/s. All of this leads me to believe there's nothing wrong with WiFi signal.
All mobile devices are running on IOS 7.1, loading apps is no issue, just loading sites is giving the problem
Any help or advice on this matter would be greatly appreciated
Kris

That's weird. Have you tried to reset the network settings on them?
Go to Settings > General > Scroll to bottom and Reset > Reset Network Settings.
Try and see if that helps. You'll need to put your passwords back in but it may help

My MacBook Pro air is working very slow... And occasionally the screen just has an envelope with a?

My MacBook Pro is moving very very slow and occasionally when the screen comes on it's an envelope with a? What do you all suggest

Your hard drive may be failing... which model MacBook Pro do you have (e.g., "15-inch Late 2011") and which version of OS X are you running?
Clinton

Macbook air mid 2009 very slow

Hello,
I recently bought a Macbook Aid mid 2009 with 2 GB ram, 120GB Sata and 1.86GHZ Core2Duo.
I'm running on OS X 10.9.3 since I bought it.
The laptop is loading very slow many times and I noticed 'kerner_task' taking alot of CPU and RAM.
I'm wondering if my laptop is not good enough for OS X 10.9.3 (this is my first Mac).
Ia there anything I can do?
Thank you

Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).

Satellite 1800 plays DVDs very slow

My Satellite S1800 is very slow, when trying to watch dvd movies, picture and voice stucks and when watching videos from youtube, its same thing.
I just formatted my hard drive and re-installed winxp and thought that would help , but no , its still same thing.
What is the problem? My toshibas specs: 1Ghz , 256 ram , 8mb trident cyberblade ai1, 20gb, i think those should roll some dvd movie?

First, I wanted to answer with a detailed reasons of this, but this forum did NOT allowed me to post my "polite and helpful" message due to spelling mistakes even there wasn't any. Then it allowed me to post without spelling checking. (did not understand, weird)
The answer of your problem is because of excessive cpu usage which i had on my similar S1800-100 while watching any MPEG-2 video or youtube video.
I don't know why the DVD drive was insertings into this notebook, maybe for data transfer or other viewing, the fact that your CPU is not strong enough to render DVD movies, it should be the reason.
Please check your CPU usage while watching videos.

IMac Time Capsule OK, Macbook Air Time Capsule Very Slow, both 10.9.5

I am struggling for more than a week trying to find an answer, but failed, hope someone can help me out
It seems after I upgraded to 10.9.5, a message on my Macbook appeared that I believe advised me to do a new full back-up on my Time Capsule. I did, it was slow, few MB after 1 hour or so, so I cancelled it. Whatever I tried, it remains a problem, I am now backing up 180GB to a 2TB Time Capsule, and it is at 53GB after 10 hours, now running at about 1GB/3 hours. My iMac, also on 10.9.5, connected to the very same Time Capsule on the same network runs smoothly, backing up 850GB in 8 hours or so.
What I have done so far, that did not help:
- Reformatted my Time Capsule completely,
- Run Disk Utility on Macbook, Repair Disk permission, Repair Disk.
- After Repair Disk Permissions it completes OK, but when I immediately run it again if finds the same problems, which it says have been corrected, see screenshot
- Disconnected my iMac from the network, sticked the very same network cable in my MacBook, ran Time Machine again, no difference
My set up:
1x Macbook Air, mid 2002, 250GB of which 70GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x iMac, beginning 2009, 1TB of which 150GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x Time Capsule 2TB, running latest firmware 7.6.4
All networked to the same network, no wireless connections
Prior to 10.9.5 I did not have this problem. I am pretty much lost. Anybody?

USB to ethernet has never been great.. although why it is worse with 10.9.5 is typical quality of apple upgrades these days.
7GB/hr sure aint fast.. it will go fairly slowly over the small files but should speed up on the larger ones.
I would take another step.. since you have come this far..
Check your wireless link speed. Depending on the age of the TC (yours in gen4) and the air.. you link speed should show 450mbps in the wifi on the mac.
Check it now..
Transmit rate should show 450.. you might need to setup close to the TC to get it.
But I achieve that by setting different names for the two bands.. TC24ghz and TC5ghz.
By default my mac will choose 2.4ghz .. because it is based on the best signal not the best speed. On 2.4ghz it can achieve 217Mbps max. Usually it will drop to 130. So by using a different name I can force the connection to the highest speed.
As you can probably tell.. IMHO using auto for everything is a great way to get things to work.. but how well they work is optimised by a committee.
Setting all the factors myself I set what I want and produce a racehorse instead of a camel.
(It is a typical joke.. camel is a horse designed by a committee!!).

Latency issues on ipad air audio is very slow

recording audio in any of my apps is noticably slow compared to my iphone 4s running ios 6 this is very annoying

RESUME: if you charge your iPad on the same USB charger than your iPhone (as I did), it's not the same ampere (resistance). iPad Air need more than the 1A form your phone USB charger, you really need to take the one who came with your iPad (2,4A).
I'll see if it's fix my problem, maybe it will charge a bit faster than 4 hours for 50% of recharge...

TS2509 play back very slow

Im using motion 4 and it's playing very slow

There are many reasons (too many to list) why Motion will run slow since it is not and never has been about *playing* video. It is about creating effects and titles FOR video. I've created projects where Motion will only get < 1 frame per second on playback (that usually means I have to *simplify* the project considerably...) The only way you can guarantee a smooth up-to-speed playback is to Export your project to video and play the video in a player like Quicktime Player. However, IF you have the RAM for it, Motion 4 will render as much of the timeline it can fit in the available RAM it has to playback with RAM Preview (command - R), usually, at full speed for as much as it can render. Motion 5 does not do as good a job at that.
Lights are notorious for slowing Motion down, especially if you have shadows turned on (Spot and Point lights.) If you have reflections turned on; if you have emitters with high birth rates; if you have a lot of layers in 3D space; if Motion Blur is enabled; and the list goes on and on... You can temporarily turn off Lighting, Reflections, Shadows, and Depth of Field from the Render menu, which should help speed things up a little bit. You can turn off extra layers (isolate the view to a few specific objects at a time) to speed things up a little bit. But mostly, you're just going to have to get used to Motion slowing down as you progress through a project.

Playing music VERY slow after 3.0 upgrade

I have a 32GB ipod touch bought in Feb 2008 (does that make it 2G?). If I listen to my songs in 'shuffle' mode, or with a large playlist, the ipod is extremely slow and unresponsive. After pressing the 'shuffle' button I have to wait about 10-15 seconds before a song starts playing. The touch controls also become very sluggish when playing songs. If I press the 'next' button there's often a 15 second delay before the screen updates and the artwork changes. During this time the controls on the ipod are also frozen which makes it impossible to skip through songs on shuffle mode.
Any idea what's happening or what I can do to fix this?
I'd rather lose half of the new features and just have my ipod play songs properly!

i am also having this problem. if i synch my first generation ipod touch and then try to play music, it says "Updating Library ... this may take a few minutes". then, if i try to play playlists with lots of songs (1000+) the controls are very sluggish, taking 5 - 15 seconds before allowing me to skip to the next song. but, it seems to "fix" itself after a minute or two. i wonder if it is indexing something in the background that it making it run slow? maybe related to the new spotlight feature? i have restored alredy. any advice?

Adobe AIR Apps + Safari = Very slow

Hi everybody,
I'm experiencing a strange behaviour of my Adobe AIR Apps on iPad. I've tested several Apps now (one GPU-Heavy Game, one CPU-Blitting App, one pretty standard Puzzle) and all of them do have the same issue - as soon as Safari is running in the background it sometimes (not always.. and most likely on iPad1) slows my App down to 1fps. Until I close Safari again. I haven't ever seen any other App doing so, thus I believe it's an Adobe AIR bug. Maybe only on iPad though.
Does anyone know why this happens or if I can get around of that? Besides my Apps run superfast.
What I've tested so far is:
- My memory usage is ~4mb. Doesn't seem to bother him if it's more or not
- My GPU-Cache is held quite low (but even with empty GPU Cache this issue appears)
- I'm using an Enter-Frame in all my apps which simulates the rendertick. Maybe this may be the fault?!
Many thanks in advance,
Marvin.

Furthermore:
- if the iPad was restarted you can have opened any iOS system-app without slowing down the Adobe AIR app
- nevertheless after some hours this bug occurs again.
Our game is in stores now: http://itunes.apple.com/us/app/ifunnel-frenzy-hd/id457822239?mt=8 and many people send us bugreports because of it. As soon as I'm telling them to close iOS system-apps things work superfine again.
You can download and test this bug for yourself - I think this might be pretty self-explaining then.
I'm a bit struggling how to solve this.. honestly.

My macbook air is running very slow

Gday @Lexchellings
Would love to hear your opinion.
Hardware Information:
    MacBook Air (13-inch, Mid 2011)
    MacBook Air - model: MacBookAir4,2
    1 1.7 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
    Mac OS X 10.7.5 (11G63) - Uptime: 2 days 2:31:27
Disk Information:
    APPLE SSD SM128C disk0 : (121.33 GB)
        disk0s1 (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 120.47 GB (33.1 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
    Apple Inc. FaceTime Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
    Apple, Inc. MacBook Air
Configuration files:
    /etc/hosts - Count: 16
Kernel Extensions:
    at.obdev.nke.LittleSnitch    (4052 - SDK 10.8)
Launch Daemons:
    [System]    at.obdev.littlesnitchd.plist 3rd-Party support link
    [System]    com.adobe.fpsaud.plist 3rd-Party support link
    [System]    com.adobe.SwitchBoard.plist 3rd-Party support link
    [System]    com.google.keystone.daemon.plist 3rd-Party support link
    [System]    com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
    [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
    [System]    com.wdc.WDDMservice.plist 3rd-Party support link
    [System]    com.WesternDigital.WDSmartWareD.plist 3rd-Party support link
Launch Agents:
    [System]    at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
    [System]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [System]    com.adobe.CS5ServiceManager.plist 3rd-Party support link
    [System]    com.google.keystone.agent.plist 3rd-Party support link
    [System]    com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
    [not loaded]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [not loaded]    com.divx.agent.postinstall.plist 3rd-Party support link
    [not loaded]    com.facebook.videochat.[redacted].plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
    iTunesHelper
    uTorrent
    Google Drive
    Matrox PowerDesk
    Safari
    Dropbox
    Spotify
    AdobeResourceSynchronizer
    Google Chrome
Internet Plug-ins:
    o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    OVSHelper: Version: 1.1 3rd-Party support link
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    DivXBrowserPlugin: Version: 2.2 3rd-Party support link
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
    Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    QuickTime Plugin: Version: 7.7.1
    googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 3rd-Party support link
    AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
    Tab Reloader: Version: 1.0
    DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
    Twitter for Safari: Version: 1.02
Audio Plug-ins:
    iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
    3ivx MPEG-4 3rd-Party support link
    DivX 3rd-Party support link
    Flash Player 3rd-Party support link
    Growl 3rd-Party support link
Old Applications:
    None
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
         3%    WindowServer
         3%    Finder
         3%    EtreCheck
         2%    mds
         0%    Dropbox
Top Processes by Memory:
    143 MB    Finder
    41 MB    WindowServer
    31 MB    EtreCheck
    29 MB    Dock
    29 MB    mds
Virtual Memory Information:
    2.18 GB    Free RAM
    597 MB    Active RAM
    197 MB    Inactive RAM
    1.04 GB    Wired RAM
    53.54 GB    Page-ins
    29.16 GB    Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook Air 2014 is very slow after waking from sleep

Constantly, when using my Macbook Air 2014 without power cord (which I am required to do at College), when my laptop goes to sleep, and I then immediately click to wake it up, it takes at least 20 seconds before the log on screen will come up. The machine has also crashed twice in the past week. Is there a solution for this?

You posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
 Cheers, Tom

MacBook Air 2012 is very slow to start applications

Hello!
I have a MacBook Air 2012 128gb 4gb RAM OS X ML
I welled up deleting the file system that is responsible for the work of php, but it does not matter, then reinstalled with full formatting.
After reinstalling the protesting all the data and some applications have a long run.
When i click the icon jumps well, and so
iPhoto 5-6 times
Mail - 3 times
Notes and reminders to 3 times
before reinstalling to run immediately after you instantly ...
it is observed only in the native programs
such as Photoshop CS6, Things, Coda, Pages start immediately ...
For most applications perform no complaints, all the missiles, but that launch annoying ...
In what could be the problem?
This Console http://cl.ly/MnBs

You posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
 Cheers, Tom

Wav files play at very slow speeds.

Real newbie stuff here, and I'm away from my manual...and wouldn't know where to look anyway.
So: I dragged a file I made with my Zoom H4 into Logic express, go to play it, and the voices sound like they are at 1/4 speed. How do I changes this?
Thanks

Is the file recorded at the same sample rate at your Logic project? (Usually 44,1 Khz)

Air play is very slow

Similar Messages

Maybe you are looking for