Air play issues on Mountain Lion

I have just updated my mid 2011 iMac and the airplay for movies is unusable. It jitters and skips on the TV while running fine on the mac. Will this be fixed on future updates? Its why I upgraded.
Any ideas how to fix this?

I dont know. I have great itunes to apple tv but that is cacheing. How can I tell what speeds I have. The movie is about 2.5 gig. Does that matter? can I reduce the file size?
What is the minimum set up to get good results? my ipad to tv is awesome.
Thanks

Similar Messages

Air play lag on Mountain Lion (Mid2011 iMac)

Goodday,
Airplay was one of the features I looked forward to the most w/ the release of ML.
Unfortunatly it give me loads of lag when trying to view videos (especially with VLC),
Do you guys have the same experience and do you have any tips to get this feature working properly?
Upgrade the memory, apply other settings or maybe something else?
ML is running on a MID 2011 iMac w/ 4GB memory and streaming to a 3rd gen Apple TV

I've not seen many reports on 'proper' Airplay mirroring to AppleTVs, but have always suspected that even if it does rely on Intel hardware h264 encoding that other Macs pre 2011 won't have, it may still be at the mercy of other factors - slow network connections between computer and AppleTV being the most likely one.
When you stream media held in iTunes it will buffer a certain amount until it feels it can play acceptably well, for a live 'stream' such as Airplay this could be even more apparent as you will be looking for lag from the live view.
I assume your devices are connected via wifi - do you have any feel for the connection speeds?
(Look in Apple > About this Mac >More Info >System Report under networking to see wifi connection speed).
How many bars of wifi signal on AppleTV?
This may be something other than the network but that would be my main concern with AppleTV streaming issues.
Unfortunately I do not have a recent Mac to test Airplay.
I wonder also if you could confirm that trying to play DVD content via DVD player results in gery/white checkerboard on your TV via Airplay - I think DVD output over Airplay is locked down.
AC

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Has Apple done anything to address the issue of Mountain Lion's inability to support Epson printers? I have a Stylus Photo RX620 that now is useless. I am not a computer geek so would rather not try to do an uninstall of Mt. Lion and go back to S.Leopard

Has Apple done anything to address the issue of Mountain Lion's inability to support Epson printers? I have a Stylus Photo RX620 that now is useless. I am not a computer geek so would rather not try to do an uninstall of Mt. Lion and go back to S.Leopard

Have you tried to open System Preferences, then Print & Scan and then try to Add + a printer?
I have an Epson RX580 and am using OS X 10.8.2 and it is working as a (Bonjour) printer. My Epson RX580 is plugged into my AirPort Extreme and I can print over my wireless network to the RX580. However, I do not see any Scan options with this setup.
Anyone know anything about getting the scanning portion of the RX580 to work over the network like the printing function does with my Airport Extreme? Or can I not "share" a scanner over the USB port on the Airport Extreme? I know, kind on topic/off topic - but I think it fits under OS questions better.
Thanks for your advice!
Randy
image added by: randynchicago

Start up Issues with Mountain Lion?

Having start up issues with Mountain Lion. Gray Screen and nothing happens.

If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Are there any conflict issues with Mountain Lion and Quicken Essentials Ver. 1.7.2

are there any conflict issues with Mountain Lion and Quicken Essentials Ver. 1.7.2 ?

https://qlc.intuit.com/app/full_page#

TS1550 Time Machine issue with Mountain Lion. Can you help?

I have an Iomega Mac Companion used as an external backup drive for my Imac running Mountain Lion. After launching Time Machine, I got an error message that said the backup couldn't' be completed because an error occurred while creating the backup folder. I rebooted and everything was fine for 24 hours. Since then, I get the same error message even after another reboot. In Time Machine preferences it says "oldest backup none" and "latest backup none."
Any suggestions?
GR

Finally have it solved!! Sort of... I spoke with Mac support on two occasions and they were extremely helpful. Thought the issue was with the firewire 800 connection. Switched to a USB connection and everything worked great...for about 24 hours. Then had the same error messages. Chatted with Iomega tech support and they finally admitted that there are known issues with Mountain Lion, there is no work around and they have no intention of making it compatible with 10.8.
I'm returning the drive today. Thanks for your help and suggestions. Suggestions for a decent back up hard drive that will work with Mountain Lion?

Yahoo games to play on my Mountain Lion

how do I get Yahoo games to play on my Mountain Lion? Keep getting error that says my security settings has bloced an untrusted appliction from running. Any help would be greatly apreciated. By the way, I have already enabled Apps to be downloaded from Anywhere, (even thoug this is only as web based application. am not downloading it at all) Also, my seurity prefs in Safari are set to not block pop up windows.

Try control - clicking on it to see if you get an Open option.

Panasonic HDC-TM900 issues with Mountain Lion.. Not compatible??

Hi, I can't see any of my video files I recorded onto my camcorder once plugged in via USB. I have a Panasonic HDC-TM900. It work fine before I updated to Mountain Lion.
When I plug my HDC-TM900 camcorder into my MacBook Pro, all the files on the camera Memory and SD card could be seen. All I did then was copy and paste the MTS files from either the Camera Memory or SD card to my desktop and convert them in iSkySoft. ( this all worked fine before I updated to Mountain Lion.
I tried plugging in the Panasonic into my iMac and MacBook this still run the older OS and all the files can be seen with no problem.
So I have concluded that it could only my an issue with Mountain Lion that it does not see or pickup certain files off my Panasonic camcorder
Can someone help ? I am very desperate to find answers.

I can't tell you why, but I can tell you that Apple published the list of supported hardware on its website quite a while ago. The oldest MacBook Pro model that supports Mountain Lion is the Mid/Late 2007 model. You have the late 2006 model.
Details are (and have been) here:
http://www.apple.com/osx/specs/

CMD+Tab Issues In Mountain Lion (consolidated)

I've seen CMD+Tab Mountain Lion issues myself and some others have posted online, so I'm consolidating them here:
CMD+Tab fails to show all running apps that are running (includes native OS apps such as iPhoto, Mail, etc.)
Pressing CMD+Tab does nothing (no pop-up), although the cursor does appear as if the command is partially being processed. (window prepping?)
CMD+Tabbing OUT of a full-screen application takes you to desktop, but then hides app icon from dock and CMD+Tab menu won't appear again... effectively leaving you stuck outside of the full-screen app (SC2). Only option is to go to activity monitor and kill process.
Interesting Side Note: I also use Alfred (CMD+Spacebar) for a shortcut/index app, and whenever CMD+Tab fails, Alfred also fails and I'm forced to manually used Spotlight to open apps. This suggests something could be tying up the CMD button and preventing it from executing combination key presses... maybe?
FIXES: The only solutions so far involve killing the processes of the perpetrating apps, i.e. finder, dock and any full-screen apps which caused the problem. Even doing so, the problem will manifest itself once again within a few hours.
Cheers!

I haven't tried experimenting with a guest user account as I solely use my admin account, but I'll play around a bit tonight. I only posted as it's manifested itself multiple times on my machine, no matter whether I sleep my computer, power nap it, restart it completely, etc. and it seems as though others have been experiencing similar issues:
https://discussions.apple.com/message/19236413#19236413
https://discussions.apple.com/message/19171533#19171533
https://discussions.apple.com/message/19106906#19106906
https://discussions.apple.com/message/19137798#19137798
It seems as though the problem may lie more with applications running but not displaying as if they're running, i.e. won't appear on dock, or if it's a native app, icon won't have indicator light, and also not available in cmd+tab menu.
Certainly odd behavior.

Why won't my macbook air boot up after mountain lion update?

I updated to mountain lion yesterday. computer acted funny at the end of the night, so i shut the lid. today, i opened the lid and it didn't turn right on. so i powered up. got about halfway into booting, and shut off. now it won't start up at all. any help would be awesome! 1,000 karma points to anyone who know what to do, since it won't boot up at all anymore.

it seems to be a power/battery issue. unplugged, it won't boot up at all. plugged in, it boots. as soon as i unplug, macbook air turns off. hope this helps you problem solving gurus out there.

Monitor calibration issue in Mountain Lion?

After installing Mountain Lion on my late 2010 MacBook Air 13", I'm unable to successfully calibrate the monitor using the settings in System Preferences. When I go to adjust the color slider in the first screen of the monitor calibrator, I'm unable to move it far enough in any direction to achieve a neutral gray. I've given up and just gone back to the default calibration, but for sensitive color work, this is not really acceptable. I've tried resetting PRAM, deleted profiles in ColorSync utility (even the default) and still have been unable to solve the issue. Anyone seeing something similar or have any suggestions?

No no I never said CS5, I said CS:S as in Counterstrike Source. CS6 works brilliantly in Mountain Lion

IMac graphics issues on Mountain Lion

Upgraded from Lion to Mountain Lion. Ever since, graphics issues kept popping up. Can't play games in Windows via Bootcamp. Screen all of sudden turned black once entered the game. Even playing games on iMac has this issue, and the whole screen turned grey. I even had a clean install of ML and also reinstall WIndows on Bootcamp, but issues still presists. Graphics artifacts appeared in Mountain Lion, which I never had during Lion. Anyone have the same issues? NOw Bootcamp is V5.0, which is the latest. Is there anything I can do? Even my MBP early 2011 model had minor graphics glitches after waking up from sleep mode, some of my friends even have glitches after opening up his MBP lid. 4 of us upgraded to ML and 3 of them had major issues, which are very annoying.

I also updated my iMac 21" Mid. 2011 base Model from Lion to Mountain Lion and also had jerky/choppy UI after waking up and only after waking up, never after a restart. I tried a clean intsall and get my data back from Time Machine but it did not help. Then I made clean install without getting back my data and without installing any Apps, and what should I say, same issue. The iMac was over night in sleep mode (this morning I had the promblem again) so i think there is an issue with the Graphic Driver or somthing else and the maintenance scripts. But not sure. I tried 10.8.1 12B17 that did not help either.
Sorry for my English.

Locked out of macbook air after updating to mountain lion? please help

i finally finished downloading and installing mountain lion this afternoon. i went to restart after install and now im locked out. i seem to be locked out by an old find my phone 4digit pin. iv tryed holding cmd and r when booting but it brings up another password which i dont know. please can someone advise me on what to do.
many thanks
Alex

Things like this always happen to me :(
I can remember locking it at work when my mate was playing on it so I locked it as I didn't want him on it and he knows my login pin. However it's been fine ever since this was done 5/6 months ago.
I need it for work in the morning :(
If I call apple with my serial number do you think they can help?

Air play issues on Mountain Lion

Similar Messages

Maybe you are looking for