Air Play mrroring. 4.4 via USB and iTunes. This needs a type B micro USB cable.
as per heading.
It worked thanks to other posts but little thanks to Apple who cost me £1.05 by not answering my call.
I have now solved my tethering problem - I didnt need to use terminal.
I downloaded the kext utility, unzipped it and put the .app file into my applications folder, then I dragged the kext file from my laptop (AppleUSBEthernetHost.kext version 2.3.0)
The utility replaced the one that itunes 10.7 must have installed or modified into a backup folder and installs the one from my laptop where I was still on itunes 10.6.3 and it has the same permissions as the other files in that folder system/library/extensions
I rebooted and plugged my iphone in via the usb charger/data cable and immediatly the system put up a window stating:
A new interface has been detected
the "iphone USB" network interface has not been set up. To set up this interface use network preferences"
I then clicked the blue button NETWORK PREFERENCES
This showed the iphone in NOT CONNECTED status so I clicked on ASSIST me and just keep going, you will notice the red dot beside the iphone changing to orange (no IP address) then it changes to green and all is well!!
Thanks a million to Hibernian56 and whoever made kext-utility!!
No thanks to apple for not testing their software properly and wasting my time with hours of reading online!!!
Im on 10.6.8 on both machines
The problem with the kext file that was updated by itunes 10.7 was that the machine no longer detected the iphone thru the usb cable. Thanks to the other users on here its now fixed! ;-)
Similar Messages
-
after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?
Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk -
HT201335 I forgot my password for air play. How to reset it and create a new one?
I forgot my password for air play. How to reset it and create a new one?
Welcome to Apple Support Communities
You have to reset your password. You can do this in this site > http://iforgot.apple.com -
So my ipod (not sure if its a 1st or 2nd g) but it has the usb and itunes symbols on the screen but when i plug it into the computer, it says, "unable to connect this ipod. type the passcode on the ipod on the ipod to connect" but i cant because of the symbols. what should i do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
So i have an ipad, and an apple tv, no laptop or desktop. My apple tv displays to my tv the micro usb and connect to itunes logo to restore. What do you do with just an ipad and no computers?
You need to grab a micro usb and restore via iTunes. If you don't have a computer then borrow one or take it to Apple. Although, if you intend to be purchasing any content it would be wise to get a cheap computer and hard drive.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
My iPad is not charging via PC and iTunes on the PC (latest software update, both PC and iPad rebooted) - charges only via AC adaptor - any ideas?
The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes.
Cheers, Tom -
I have a iphone 3gs and while trying to update tot the new software my phone gave error -1 and went to usb and itunes logo page and says it is in recovery mode. I have tried to get it out of this mode but have had no luck. My iphone is not jailbroken, so i don't know why this is happening.
The device is in recovery mode. Connect it to iTunes and the computer and you need to restore it.
-
my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help
http://support.apple.com/kb/HT1808
-
i recently purchased an iphone 3gs second hand .wanted to use i tunes and whatsapp but kept saying need to udate to lastes firware or what ever so went on itunes to update. update started but keeps failing now phone wont work at all .all we get is either apple logo or pic of usb and itunes logo.andy help would be gratefully recived only had phone a day.has sony experia and wanted to change to apple and fist time its now useless.
Sorry to be the bearer of bad news, but the iPhone 3GS can only be updated as far as 4.2.1
Requirements for WhatsApp are iOS 4.3 or later. This app is optimized for iPhone 5.
As noted here > WhatsApp Messenger for iPhone on the iTunes App Store
So that app cannot run on the iPhone 3GS.
I stand corrected but apparently you may not be able to update the device regardless.
Message was edited by: CS -
PlEASE HELP ME RESTORE MY IPAD 2. JUST SHOWING USB AND ITUNES SYMBOL TO CONNECT.
iPad 2, iOS 7.0.2, fix it1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
suddenly my phone cannot open on the screen it just show usb and itunes logo only... needed help and solutions urgently thanks a lot
Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore (step 3 without going to step 4) starts updating itunes with no effect to screen which is still showing usb and itunes symbols
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone???? plz help me
I will need a little bit of information about your phone. What kind of error are you getting?
-
my ipad is almost one year old. I was attempting to update the ios and my ipad screed is black with the usb and itunes only. what do i do?
Do as the image on the screen suggests.
Connect the device to a computer running iTunes and restore. -
my 3gs stays on the screen with the usb and itunes picture on it. when i restore the phone on itunes it give me (-1) code. what shoud i do?
You could try restoring and staying away from that backup. I've had that happen to me before on my iPhone 4 from a corrupt backup. You could be coincidently mixing the two issues, sounds to me like you got lucky and your phone is A-OK but you may be using a corrupt backup.
Maybe you are looking for
-
I had to disconnect my My Book USB to G5, firewire to external hard drive
I had this hard drive formated journaled whatever was recommended and it has been used to drag all photos off my full G5 internal drive which has only a 80GB hard drive. I have added a second internal drive and have successfully formated it and it sh
-
What is report unrecoverable;
RMAN> report unrecoverable; Report of files that need backup due to unrecoverable operations File Type of Backup Required Name 22 full or incremental /u02/proddata/a_txn_data01.dbf 23 full or incremental /u02/proddata/a_txn_data02.dbf 24 full or incr
-
Can I download adobe flash on kindle fire HD for facebook games
-
Hello, For some transport orders only but not all, when I want to see the logs of the import (via SE01 or STMS) I only get a line of "##########". The physical file under UNIX is empty. I don't find anything in the SAP notes. Has anybody ever experie
-
FreeRadius and Cisco 2600 Terminal Server [IOS 12.1(3)T]
Hi Cisco People I'm using FreeRadius 2 and Cisco 2600 Terminal server to coordinate access to cisco routers based on time ranges. Basically we are an education/training environment where we have some students accessing the routers and switches for p