Air port 7.6 firmware problems

as anyone had problems with this firmware upgrade?

Yes.  You might want to look here:
https://discussions.apple.com/message/16827086#16827086

Similar Messages

  • Air Port Express/ Mini Mac problems

    Trying to link my Mini Mac to an iMac - both old.
    iMac is successfully running 10.4.3 with Airport Extreme working.
    Mini Mac (old) - no airport card - hooked up to AirPort Express with ethernet cable.
    Mini Mac/ Airport Express seem unable to connect to Airport Extreme.
    Located about 50 feet away from each other.
    Any suggestions? Would it be better to connect the Airport Express to the Mini Mac with a USB cable?

    TreeWizard123 wrote:
    Trying to link my Mini Mac to an iMac - both old.
    iMac is successfully running 10.4.3 with Airport Extreme working.
    Mini Mac (old) - no airport card - hooked up to AirPort Express with ethernet cable.
    Mini Mac/ Airport Express seem unable to connect to Airport Extreme.
    Welcome to Apple's discussion groups.
    First you need to configure your AirPort Extreme and AirPort Express so that the two AirPort units for a "WDS" network. You can find instructions starting on page 42 of this manual:
    http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf
    Any suggestions? Would it be better to connect the Airport Express to the Mini Mac with a USB cable?
    That won't work. The AirPort Express USB port is only for a printer.

  • Air Port firmware upgrade

    I did a software upgrade yesterday having read that it solves some serious security problems, and in the process I also got a firmware upgrade for the AirPort Extreme WIFI card in my MBP.
    After the re-boot, my Mac was trying to connect to the 802.11n interface on my Air Port Extreme! This was totally unexpected since I have an older MBP without the 802.11n support - could the firmware upgrade have added it?
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 1.3.4
    Current Wireless Network: wireless network not available
    A more general question is - Where do I find details of each of the software/firmware upgrades and what they include - similar to Micro$oft's KB articles?
    Walt

    There was a thread here a few months ago - I can't find it now - that explained that Apple, in the newer versions of the MacBook Pro, upgraded the AirPort Extreme hardware. the way you could tell the difference between the "old" and "new" hardware was the numbers in parentheses (0x168C, 0x86) following the name. I don't remember which was what, and I can't find the thread, just that mine was NOT the "new" version that was upgraded to 802.11n.
    That's why I was excited when the MacBook Pro started to try to authenticate to the 802.11n connection. I didn't have time to investigate further, and won't now for a couple of days, but when I learn more I'll report back here when I do.
    I'm guessing from the numbers, that your Mac Mini has the same AirPort hardware, but don't take that as fact
    Walt

  • Air Port Scanning Problem

    I have a MacBook and wifi connection (netgear router is connected to DSL line) . Recently the internet has slowed to a screeching halt. When I look at the Air Port menu bar, Air Port shows that it's continually bouncing from AirPort:scanning to AirPort:on. It shows that I have 4 bars for the connection but yet it takes forever to load any webpage. Has anyone had this type of problem and does anyone know how to fix it?

    Hi guys. Just wanna report in another case of the!!!
    It really is a big problem. But it seems only to be on certain networks and then in the diagnostics it says that everything is ok. somebody help us

  • Please help ! problems with my air port extreme

    have had problems with my air port extreme can not find my iphone but it finds my  ipad without problem. had it in one place temporarily
    I moved it to the place I want it to be. then it started to malfunction finding the ipad but not my iphone so I moved back air port extreme to the first place I had it on in which it worked . it did not help!  so is there anyone who could help me please

    Welcome to the forum. Glad it solved your problem. This forum is one of the great resources for FCP users on the net. Come back often, read much and contribute.
    As a new user you may not be aware that the that people who ask questions reward people who answer them is to click on the or buttons over posts as appropriate...
    x

  • Air Port Extreme connection problems

    I have a Macbook Pro and a 1st gen. Ipod connected to the Internet using an Air Port Extreme.  At this time I cannot use two devices at once to access the Internet, only one or the other.  What should I do to adjust settings on my Airport?

    The modem is a Motorola modem (silver) provided by AT&T and the model # is: 2210-02-1022 - I believe this is correct
    style: MSTATEA
    serial: 164303845632

  • Air port problem

    When I connect to internet through air port and every thing
    is fine. After ten minutes later, my air port icon change
    to gray and internet connection is disconnected. But the air
    port setting is shown air port actived. Can you help me
    how to check the air port setting??
    Thanks
    mac book   Mac OS X (10.4.7)  

    I see you're running 10.4.7 - would you consider running software update (select the blue apple in the top menubar, then select software update) and upgrading to 10.4.8, as well as applying any other updates for your MacBook?
    It may resolve the issue. The other possible answer is that your wireless connection is experiencing interference.
    If you have other 2.4GHz devices (portable house phones, microwave) within reasonable distance form your wireless router it may cause interference with your wireless connnectivity.

  • Air Port Express Audio drop Out Problem

    Hi I have just brought an Air Port Express home and spent the evening setting it up which went relatively smoothly, but once tested using the Optical out into an Musical Fidelity V3 X Dac (Digital to Analog Converter) the sound persistently jitters making music unlistenable,using conventional 3.5mm stereo jack output works fine it only seems to be on the optical.
    Have read as much as I can find of use on the net but it seems either the optical out is faulty or incompatible with this DAC or some people have mentioned it might be the latest version of I tunes all my soft-wear is up to date.
    Does anyone have a solution or should I return it or will anyone at Apple no what I`m talking about in the shop I got the impression they didn`t know anything about the Optical out.
    Any Help greatfully recieved.

    You will need to try several different optical cables as they vary tremendously in their signal integrity. It is not unusual to see two identical cables from the same manufacturer perform very differently. Check out the store's return policy and try several different cables to see if you can find the right combination.

  • Problems with Air Port Express

    I had an AE connected working fine. Now I have the amber light. Tried to reset while plugged in until amber light flashes. Support says the green light will flash 5 times but it never does. Air port Utility shows no AE. What do I do? All i get is this steady amber light. Do I connect it via my time cap? I do not get it.

    I had an AE connected working fine. Now I have the amber light. Tried to reset while plugged in until amber light flashes. Support says the green light will flash 5 times but it never does. Air port Utility shows no AE. What do I do? All i get is this steady amber light. Do I connect it via my time cap? I do not get it.

  • HT4628 Air Port problems or Time Capsule?

    My MacBook doesn't show the Time Capsule in the Air Port Utility but it does on my wires MacBook?

    Your sentence doesn't make sense?
    Do you mean it only shows up when connecting with an ethernet?

  • HT1218 Why my Mac Book with OsX 10.9.2 connected with my Air Port Extreme A 1408 , but Airport Utilities cannot confute my Airport Extreme. Although can connect internet?

    I had Airport Utilities in my Mac Book 2009 with OsX 10.9.2 , I can online with My Airport Extreme A 1408 via Wifi. But Airport Utilities cannot configure Airport Base Station. And I don't see the update . I used my Ipad Air to update  newest firmware my Airport Extreme . It's done. From Ipad I can see the informations as following :  IP Adress , Lan IP Adress 10.0.1.1 , version 7.6.4.....,...Model Airport Extreme 802.11n (5th Generation) ....in full details. But not in my Mac Book. Please Help. Thanks.
    Loilevan

    I had this problem a couple of days ago. Near as I can figure, the drive drops off line periodically. Many people are having this issue. On your Mac, go to finder and see if the MyCloud shows up. Mine didn't last time I had a problem. I ended up unplugging the drive, letting it sit for a couple of minutes, and then plugged it back in. I also disconnected the ethernet cable(not sure if this was necessary). After a few minutes, it showed up in finder. I use Time Machine and Time Machine editor to perform backups daily. I know it's dropped off line if my Mac hasn't backed up in the last couple of days. If it's currently online, and was just unavailable when the Time Machine attempted a backup, I just let it go.
    I have the Airport Extreme base station as well. I have been unsuccessful in port frowarding with this thing. I always have a Relay Connection on the Settings-General-Cloud access portion of the My Cloud dashboard. It seems to work fine, and overcoming this issue has dropped to the bottom of my To Do list. As long as Remote Access is on, and it shows connected(Relay or otherwise), you should be good to go. It evidently isn't optimal, but then again neither are my technical abilities.
    Hope this helps. I am an average user with average(at best) computer abilities. This is just my average experience. P.S. Moving the drive while it's operating is bad...Mmmkay!
    John

  • Mac Power PC G5 with Air Port Extreme

    Hello,
    At home I have installed, since many years, a Wi-Fi network using an Air Port Extreme Base station. This works fine with different computers. Now I have “recovered” an older Mac from my office, which works with a dual PowerPC G5 and OS 10.5.8. It seems that this machine is not able to work with a wireless network (no Air Port antenna). I would really appreciate to connect this machine to the Internet. Obviously one possibility is to draw several meters of Ethernet cable through the apartment … *Here is my question: is it possible to use Air Port Express for connecting my Mac with PowerPC G5 to my normal Wi-Fi network (and to Internet)? In other words: the PowerPC G5 is connected to the Air Port Express via a short Ethernet cable and has then access to my Wi-Fi network?* Thanks in advance and all the best for the New Year.
    Bernd

    I have the same problem - but no solution either yet. Still looking.
    Apple airport extreme firmware 7.5
    Vista x64 will connect to access point and receive IP address from server, but will not connect to the internet unless WPA2-AES security is disabled.
    I get no response when pinging the gateway (10.0.1.1)
    My XP machine will connect - no issues.
    The vista laptop will connect to a friend's timecapsule firmware 7.4.2.... puzzling.
    I hope someone has an clue to figure this out.

  • Just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ??

    just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?

    mickair wrote:
    I have been experiencing some networking problems
    Welcome to Apple's discussion groups.
    I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
    Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
    I use {the TC's} DHCP function ... to avoid unauthorized use.
    This a discussion for another thread, but that's not what DHCP is for.
    The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
    With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
    The AEBS is currently setup as being a WDS Relay at the moment
    Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
    Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
    http://discussions.apple.com/thread.jspa?threadID=2273124
    {The AE-Alpha} connects fine as WDS remote at the moment
    I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
    Physical location:
    AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
    A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

  • How can I use my IPAD to stream Musik to two Air Port Clients in a network at the same time?

    I want to stream my musik via I PAD to more than one Air Port Clients at the same time. Via MAC it is possible to select "more speaker". In the I PAD I can only select Station 1 or Station 2.

    I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
    Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
    Is there a way to accomplish what I want to do that is reasonably simple?
    You can put time controls onto the offending addresses.
    But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
    Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
    See how to find passwords here.
    i forgot my password for my router, how can I change them.
    So anyone can discover your passwords without your knowledge and leave no trace on your system.
    If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
    The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
    Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
    You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

  • While using the computer the wi fi dropped out and it can longer find any networks. I have played around with the air port etc , still have no networks and can't connect to internet. Please help

    Hi I am having Wi fi connectivity issues , while using my computer the wi fi dropped out , I can no longer connect and no networks come up. I have tried looking into the air port, trying manually to connect to the desired network with no success , it says the Wi fi is turned on. I am at a loss to why it will no longer connect, please if you have any suggestions,as I tried to ring apple support but my warranty has expired this is my first major issue since I purchased it in 2009.
    Thanks

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

Maybe you are looking for

  • If Wengophone doesn't work for you...

    I've read reports from within these forums of Wengophone working for people under both 32 and 64 bit Arch. I've been trying to get it to work since 2.0 on 64 bit. I've tried many builds of 2.1.1, 2.1.2, 2.2 alpha 1 and 2, to no avail. Being motivated

  • Using utl_encode.base64_encode within decode function

    Hi, I want to use utl_encode.base64_encode within decode function. However, the result is not as expected. select 'a', decode('a', '1', 'EQUAL to 1', --'NOT EQUAL to 1' utl_encode.base64_encode('a') ) result from dual A     RESULT a     43673D3D 4367

  • Issue with : Stateful BSP Applications: New State Management Option

    Reference:weblog by Thomas Jung -  /people/thomas.jung3/blog/2004/11/09/updated-stateful-bsp-applications-new-state-management-option I see a comment by one user to send the complete code... I am not sure what else can be sent   - try it out rather t

  • Copying master pages between documents.

    I Am laying out a book with 36 chapters and I formatted my master page and completed Chapter One.  Chapter Two is a new document and I want to carry over Master-A to each successive one.  I believe there must be a way to do it, but nothing I have tri

  • MIGO:GR/GI SlipNo in MType103 not picked during corresponding MType 105

    Dear friends, In MIGO the entered GR/GI slip No field data during "Goods Reciept" with MType 103 is not picked up while performing the MIGO "Release GR blocked stock"  with MType 105. The other fields in the MIGO header like Delivery Note & Bill of l