Air Port Express Will Not Install

I just installed OS X 10.5 on a new Mac Book Pro. When I try to install AirPort Express on my hard drive (unpartitioned) it says: "You cannot install AirPort on this volume. The version of Mac OS X on this volume is not supported". What do I do?

diznory, Welcome to the discussion area!
Forget about the software on the disc. Use the AirPort software in the /Applications/Utilities directory on your MacBook Pro.

Similar Messages

Air port express can not been accessed

My OSX has been upgraded to 10.7.4, and use Air port express as my AP, my iPhone and iPad(even non-Apple product) can access the AP, but my Mac book pro can not access it, even airport utility can not find it. But the AP is shown on the menu bar on the top screen and can not be selected.
Sometime a dialog box displayed to ask for password. But I keyed in correct password and it shows connection timeout.

"Pulling" a folder refers to basically moving (or renaming) a folder that holds preference data that the OS will recreate if it can't find it. For instance, anything in the ~/Library/Preferences folder. It's useful when trying to isolate software issues because often these problems are just as a result of corrupted preference files.
When dealing with network preferences, the stuff you want is in /Library/Preferences/SystemConfiguration. That is to say, the ROOT library, accessed by going Finder>Go>Computer>Mac HD.
If you rename this whole folder to SystemConfiguration.old and then restart, the OS will create a fresh folder, which often resolves OS-related networking issues. From that point, you can either delete the SystemConfiguration.old folder, or name it back and then delete the new one if you want to start trying to individually isolate what went wrong.
If nothing changes at all when you rename or move the SystemConfiguration folder, then you're likely looking at some nasty interference issues. Try changing the channel on your Airport Express.

Visual Studio Express will not install

Hi, I am trying to install Visual Studio Express for Windows and as far as I can tell my system meets all the criteria however when I try to install it says I need to update windows to a newer version.
I am running Windows 7 XP 64bit Service Pack 1 and IE 11
The end of the install log gives the below, what am I missing? :
[118C:0BF8][2015-04-08T13:43:21]i101: Detected package: WinACK_x86_x86_en, state: Absent, cached: None
[118C:0BF8][2015-04-08T13:43:21]i101: Detected package: winexpress_finalizer, state: Absent, cached: None
[118C:0BF8][2015-04-08T13:43:21]i052: Condition '(VersionNT = v6.3) AND (WindowsBuildNumber < 9600)' evaluates to false.
[118C:0BF8][2015-04-08T13:43:21]i052: Condition 'VersionNT < v6.3' evaluates to true.
[118C:0BF8][2015-04-08T13:43:21]i052: Condition '(VersionNT = v6.3) AND (netfxfullredist_43_DetectKey < v4.5.31101)' evaluates to false.
[118C:0BF8][2015-04-08T13:43:21]i052: Condition 'CompatibilityMode = 0' evaluates to false.
[118C:0BF8][2015-04-08T13:43:21]i052: Condition 'RebootPending = 1' evaluates to false.
[118C:0BF8][2015-04-08T13:43:21]i052: Condition 'NOT (IEsvcVersionExists) OR (IEsvcVersion < v10.0)' evaluates to false.
[118C:0BF8][2015-04-08T13:43:21]i000: MUX: Stop Block: WinBlock : This version of Visual Studio requires a computer with a !$!http://go.microsoft.com/fwlink/?LinkID=427810&clcid=0x409,newer version of Windows!@!.
[118C:0BF8][2015-04-08T13:43:21]i000: MUX: Detect Completed
[118C:0BF8][2015-04-08T13:43:21]i000: MUX: Wait for View to be loaded
[118C:2208][2015-04-08T13:43:21]i000: MUX: Detect Completed, now create view
[118C:0BF8][2015-04-08T13:43:22]i000: MUX: View loaded
[118C:0BF8][2015-04-08T13:43:22]i000: MUX: Go to Blocker page.
[118C:0BF8][2015-04-08T13:43:22]i199: Detect complete, result: 0x0

Hello Mike,
Can you clarify the OS version first? What is Windows 7 XP 64bit Service Pack 1? It is Win 7 or Win XP?
Condition '(VersionNT = v6.3) AND (WindowsBuildNumber < 9600)' evaluates to false
Condition 'VersionNT < v6.3' evaluates to true
I checked here http://en.wikipedia.org/wiki/Windows_NT to see those NT versions and find that v6.3 means Win 8 version.
So please notice that " Visual Studio Express for Windows " is for Store Apps and Phone Apps, they required Win 8 or higher version OS. Win 7 or Win XP does not meet the requirements for this kind of VS.
If you just want to develop normal version, please choose to use Visual Studio 2013 Express for Windows Desktop.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Application Express will not install

OK - I have been working on this for days now. I downloaded Oracle Database 11g and installed the "standard" version. All seems to be working OK and I can connect to the DB using SYS as SYSDBA.
Next, downloaded Apex 3.2 and unzipped it into a separate directory (C:\TEMP\APEX). Tried to run through the installation instructions for Apex but continually can't get passed the @apexins section. I run SQL*Plus, log in as SYS as SYSDBA, and run @c:\temp\apex\apexins SYSAUX SYSAUX TEMP /i/ per the instructions. The SQL*Plus window flashes some messages then closes. The user APEX_030200 is not created (FLOWS_FILES and APEX_PUBLIC_USER already exist because 11g comes with earlier version of Apex). Can't continue from here - can't set the ADMIN password as the @apxchpwd script errors out with:
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
etc.
I also tried copying the whole "apex" directory from c:\temp over the "apex" directory in the 11g directory structure and running the install. Same results.
Can anyone help please??

On Windows:
1. Click on the Start button and then click Run
2. Change to directory where you unzipped the Apex. E.g. c:\apex
3. Then execute:
sqlplus /nolog
connect sys as sysdba
type the password
4. Select the appropriate instalation:
Example:
@apexins SYSAUX SYSAUX TEMP /i/
5. When you to run the apex_epg_config.sql ensure this:
On Windows:
@apex_epg_config SYSTEM_DRIVE:\TEMP
Replace SYSTEM_DRIVE:\TEMP by C:
Then result is:
@apex_epg_config C:

New Air Port Extreme and old Air Port Express?

Just got my Air Port Extreme up an running. Is there any reason why my 4 year old Air Port Express would not work with the new Extreme?
The extreme saw briefly yesterday but today the computer doesn't see the express and the extreme only flashes with the orange light showing it has no signal.
Only thing that did change was I did the firmware update on the extreme.
Message was edited by: jcox

Welcome to the discussions!
Connect an ethernet cable from your computer directly to one of the LAN <-> ports on the Extreme. Open AirPort Utility - Manual Setup so the summary page is displayed.
Click on the amber dot and a message will appear with the reason for the flashing amber light on the Extreme. What is the message?
Regarding the Express, how do you plan to use it in your network?

Can i use an air port express on the road when im travelling

Hi
I am going away on hoiladays and wondering if my apple air port express will work if i just plug

It can, but only very slowly since the iPhone power adapter doesn't put out as much current. If you only have room for one adapter, take the iPad adapter.
Regards.

I have air port express 802.11n and imac ver 10.7.5. When I try to set up my wifi I get error message 'that the version mac os x is not supported' Help?

I am trying to set up wifi using air port express 802.11n version 1.3 on my imac os x ver 10.7.5. Get error message Air port can't be installed on this disk that the ver of mac not supported - Help????

Please check the model number on the side of the AirPort Express in the faint print. It will start with an "A" followed by four numbers, as in A x x x x.
Post back with your findings.

AIR will NOT install

XPpro with 2.4ghz cpu, 2 gig ram, 2 much harddrive, single-user desktop, and I am the registered administrator.
Problem is Adobe AIR will NOT install.
I downloaded Adobe AIR installer and ran in normal way.
Adobe AIR attempts to install and then craps out with a message, "Sorry, an error has occured."
The error reported is error=0.
There are no logs, because there are no Adobe AIR common files in the Program directory.
Adobe AIR does NOT appear on the list of installed programs in Control Panel.
Have searched the registry and removed all references to AIR, and then tried to reinstall, with same result.
Another time, the error message said I was not the administrator, but control panel says I am, and I am the only user.
Any HELP solving this critical problem would be keenly appreciated, and thank you.

Sorry forgot to add system info:
Win7 Pro (current) Intel Core i7-2600K CPU @ 3.40GHz, 16.0GB RAM, NVIDIA GeForce GTX 570
Socket LGA1155. Intel P67 Express Chipset
Thanks

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

HT4667 why can't i get the download to install on my macbook pro for the air port express

why can't i get the download to install on my macbook pro for the air port express ?

If you are running OS X 10.7.2 then you will be able to use AirPort Utility 5.6.
Leopard, Snow Leopard: AirPort Utility 5.5.3.
Tiger: AirPort Utility 5.3.2
Panther: AirPort 4.2

I need to upgrade my first generation Macbook Air to Lion OS x10. I need to install software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The lion s

I need to upgrade my first generation Macbook Air 1,1 to Lion OS x10. I need to install other software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The Lion software update 10.7 is no longer available from the store or downloads.
Where do I get this?
It was only released a couple of months ago.
I really feel disinfranchised already by not being able to upgrade and keep up with other software needs but to not allow me to update to my full capacity is really ridiculous.

@Jennacide wrote:
It was only released a couple of months ago.
OS Lion was released 16 months ago... in July 2011.
Lion Tech Specs > http://support.apple.com/kb/SP629
To upgrade to Lion...
Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates...
Be sure to make a Backup of your Current System Before Upgrading...
Also... Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

Adobe Air will not install. Prior to attempted reinstall, it would not update.

Adobe Air will not install / reinstall. Prior to attempt to reinstall, it would not update. The automatic "update now" button was greyed out, but the "update later" button was active.

Here is what my system administrator wrote:
1. Right-Click on the installer, clicked 'Show Package
Contents' and attempted to install from the MasOS folder. This
provided an interesting error in the terminal window, however still
did not install.
2. From there, I opened 'Console' (found in Applications
--> Utilities) and dug through the install error logs. Pinned
the issue down to AIR trying to update / use files that were
already in use.
3. Restarted the computer under the primary admin account
(the account used to setup the computer) and installed successfully
from there.

Adobe Aire will not install?

Adobe Aire will not install? I am new to this site and I have never seen one more difficult to navigate ! Every time I click I get asked to subscribe to something else it seems. What a bunch of hucksters !!
Andrew

i dont know if this is any help to you...
http://www.cruciallimit.com/blog/?p=74
seems a few people are having probs with this.

Logic Express 9 will not install.

Hi all,
I just bought a Macbook Pro 17" with Logic Express 9 and the program will not install and comes up with with "Errors where detected and installation has stopped. Contact the manufacture." It would get through to about 20 - 30% when it fails.
I have updated my mac with all the latest updates and I have only installed Adobe CS3 Master collection. CS3 did not install with succsses either and Encore failed to install. To be honest CS3 I have found never installs like it should so that does not seem out of the norm (Although it should be Adobe).

Hi There.
Did you manage to get this sorted? I have just bought a brand new Mac myself and cannot install Logic Express 8!
I have limited connectivity to the internet and don't know what to do.
If yo sorted the problem, would be great to know how you did it!
Cheers

Air Port Express Will Not Install

Similar Messages

Maybe you are looking for