Air port extreme connection to BT Home

Hi just bought AirPort Extreme, I have BT home broadband I understand that the AirPort Extreme router cannot replace the bt router but has to work connected in line?

The BT Home Hub is a combination modem/router or gateway device. The AirPort Extreme does not include the modem portion and only performs the router part ... so they are not interchangeable.
You can still use the AirPort Extreme, but how you configure it will depend on your overall networking goals for both the BT and AirPort devices.

Similar Messages

  • Air Port Extreme connection problems

    I have a Macbook Pro and a 1st gen. Ipod connected to the Internet using an Air Port Extreme.  At this time I cannot use two devices at once to access the Internet, only one or the other.  What should I do to adjust settings on my Airport?

    The modem is a Motorola modem (silver) provided by AT&T and the model # is: 2210-02-1022 - I believe this is correct
    style: MSTATEA
    serial: 164303845632

  • MacBook not showing external hard drive connected to Air Port Extreme

    I have a MacBook 5.2 running Mac OS X Version 10.5.7. I am running a wireless network Air Port Extreme router Version 7.4.2. I have connected a 1 TB Western Digital 10EAVS External hard drive and a printer to the Air Port Extreme router via a USB 2 hub. My MacBook sees and I am able to utilize the printer, but the Western Digital 1 TB External drive does not show up. I can see the 1 TB External drive via the Air Port Application setup, but it is not showing up on my desktop or in Utilities/Disk Utilities. I have connected the External drive directly to the USB port on my MacBook, and the drive showed up on my desktop instantly. I partitioned the External drive into two partitions and ran Time Machine which successfully backed up my MacBook. I then disconnected the External hard drive from my MacBook and reconnected it to another USB port in the hub connected to the Air Port Extreme. Once again, my MacBook does not see the External hard drive. I can see the External hard drive via the Air Port Extreme application right down to the two individual partitions. I even removed the USB hub and plugged the External hard drive directly into the Air Port Extreme router, but my MacBook still did not see the hard drive. I've restored version 7.4 and 7.4.1 on the Air Port Extreme, but it did not help. Does anyone have any insight what settings might need to be changed on my MacBook to allow it to connect to the External hard drive while it is plugged into the Air Port Extreme wireless router?

    Do you have an older "dome" style AEBS or the rectangular model? The former will not work with TM. Early versions of the former may not work until you enable them to see a TM drive by doing the following:
    Open the Terminal application in your Utilities folder. At the prompt paste the following command and press RETURN:
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    The drive should now be accessible via TM.

  • How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    Depending on whether a device is connecting using Ethernet or wireless, you need to know the Ethernet ID or AirPort ID of the device. That is the number that is associated with the IP address that is displayed in AirPort Utility.
    For example, if you have a Mac....
    Open System Preferences (gear icon on the dock) and open Network
    Click on AirPort , then click Advanced at the lower right
    The AirPort ID of the Mac is displayed at the bottom of the window
    For the Ethernet ID, click on Ethernet, then click Advanced, then click the Ethernet tab
    The Ethernet ID is displayed at the top of the window
    On an iPhone.....
    Tap the Settings icon, tap General, tap About, then scan down to locate Wi-Fi Address, also known as the AirPort ID.

  • Can I use the new Air port extreme to scan, print, and share a hard drive?

    I currently have a canon 3and1 pixma MP750 printer, and a lacie brick 250gb usb external drive. I'm looking into buying a airport extreme "n" base station and a apple tv to share all my music on my home theater. I'm also planning on updating my current system to an Imac 17" intel duo 2.18g. My question is will I be able to use the scan function on my printer with the air port extreme, or is there away to connect multiple computers to 1 printer? (ie emac directly to printer and airport extreme directly to printer via some product I may not know of) And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
    Emac G4 1gig   Mac OS X (10.4.1)   Shopping for new mac

    My question is will I be able to use the scan function on my printer with the air port extreme
    Unfortunately, no. The new AirPort Extreme Base Station, like all other AirPort Base Stations, do not support the scan or copy features of "all-in-one" printers attached to their USB ports. This is primarily due to the fact that these features require two-way communications which the USB port does not support.
    is there away to connect multiple computers to 1 printer?
    Yes, if the printer is Ethernet-enabled, you can connect it to one of the AEBS's LAN ports...or use a Wireless Ethernet Bridge, like the Linksys WET54G to connect the printer wirelessly to the AEBS.
    And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
    No, the new AEBS should support this.

  • Inability to Make use of Air Port Extreme

    I'm a new Mac Book user who purchased an Air Port Extreme card side-by-side with my Mac Book in hopes that I would be able to use the card to extend my wireless range for the purposes of use at University.
    I have had my Mac Book at home for 3 more days than the Air Port Extreme card, as it arrived via a different shipping company, and have thus far been loving the seamlesness of my internet connectivity. Today, the Air Port Extreme card arrived, and being inexperienced with computers as I am, I assumed there would be a place on the Mac Book itself to plug it in. However, discovering the fact that I was so obviously wrong, I did some exploration in the user manual and found out that if one ordered the card with their lap top, it was apparently installed. So, my first question is:
    Do I have a physical use for this Air Port Extreme card with my Mac Book, or perhaps have I ordered it under the false assumption that I'd be able to use it with my Mac Book?
    Furthermore, I went on to install the Air Port Extreme software packaged with the card on to the computer, and now have Air Port (Extreme) 4.2 on my laptop. However, when I attempt to use the set up client, I encounter the following:
    "In order to use the AirPort Setup Assistant your AirPort card must be enabled and AirPort needs to be turned on and set to use DHCP. Click OK if you would like to change these settings, or Skip if you would like to configure AirPort Base Stations using ethernet."
    Furthermore, when I click OK, the following comes up:
    "There was an error communicating with your AirPort card. Please make sure it is installed properly and try the AirPort Setup Assistant again."
    I went through the install and reset process, and it seems as if I'm being told I haven't done enough installation or set up to make use of the Air Port Extreme internet connection.
    Can someone give some help as to how to circumvent this problem? Is there a physical use for the Air Port Extreme card I'm ignorantly missing? Somewhere to plug it in? Have I ordered it under a false assumption I could use it for my Mac Book? Or is it a matter of tweaking my network preferences?

    Hello Eli Cyment. Welcome to the Apple Discussions!
    I have had my Mac Book at home for 3 more days than the Air Port Extreme card, as it arrived via a different shipping company, and have thus far been loving the seamlesness of my internet connectivity. Today, the Air Port Extreme card arrived, and being inexperienced with computers as I am, I assumed there would be a place on the Mac Book itself to plug it in.
    All of the new MacBooks come with an AirPort Extreme card built-in so, unfortunately, ordering the card was unnecessary.
    Do I have a physical use for this Air Port Extreme card with my Mac Book, or perhaps have I ordered it under the false assumption that I'd be able to use it with my Mac Book?
    No, and Yes.
    "In order to use the AirPort Setup Assistant your AirPort card must be enabled and AirPort needs to be turned on and set to use DHCP. Click OK if you would like to change these settings, or Skip if you would like to configure AirPort Base Stations using ethernet."
    This is basically telling you that the AirPort Setup Assistant required that the AirPort card be enabled in order to use it to setup an AirPort base station. Do you currently have and are using an AirPort base station for your Internet access?
    You should also have either the "AirPort Admin Utility" and/or the "AirPort Utility" (note the missing word "Admin") in your \Applications\Utilities folder. Which one(s) do you have?

  • Mac Power PC G5 with Air Port Extreme

    Hello,
    At home I have installed, since many years, a Wi-Fi network using an Air Port Extreme Base station. This works fine with different computers. Now I have “recovered” an older Mac from my office, which works with a dual PowerPC G5 and OS 10.5.8. It seems that this machine is not able to work with a wireless network (no Air Port antenna). I would really appreciate to connect this machine to the Internet. Obviously one possibility is to draw several meters of Ethernet cable through the apartment … *Here is my question: is it possible to use Air Port Express for connecting my Mac with PowerPC G5 to my normal Wi-Fi network (and to Internet)? In other words: the PowerPC G5 is connected to the Air Port Express via a short Ethernet cable and has then access to my Wi-Fi network?* Thanks in advance and all the best for the New Year.
    Bernd

    I have the same problem - but no solution either yet. Still looking.
    Apple airport extreme firmware 7.5
    Vista x64 will connect to access point and receive IP address from server, but will not connect to the internet unless WPA2-AES security is disabled.
    I get no response when pinging the gateway (10.0.1.1)
    My XP machine will connect - no issues.
    The vista laptop will connect to a friend's timecapsule firmware 7.4.2.... puzzling.
    I hope someone has an clue to figure this out.

  • Airport Utility can not find air port extreme base station

    I am running XP home on my computer and have an air port extreme base station connected to it wired. I have no problem connecting to the internet yet more times then not the air port utility can not find the base station. On occasion it will find it but most of the time it can not. Rebooting does not help.

    I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
    I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
    After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
    Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

  • Confused on Wireless Options when adding second Air Port Extreme to network

    Hello and thank you for your anticipated help. I decided to increase my coverage in my home by adding a second Air Port Extreme to the network. I followed the setup as outlined and it is connected to the network (green solid LEDs) but when I looked at the second Air Port Extreme I noticed under wireless options that there are different options listed. The primary APE show this:
    The extended APE shows this:
    Are these setting correct?
    Thanks!

    Thanks for the reply.
    I understand the fact that a "hidden" network really isn't so hidden. I have a rather secure SSID (17+ characters) that should slow down anyone trying to access it from outside, especially since most programs designed to defeat PW tend to limit themselves to 16 characters. We're not a nuclear site, but I just feel better knowing that I have at least checked the box that made it hidden.
    Everything is working well and I just didn't understand the whole second APE setup thing with the channels and frequencies.
    Thank you for you help and input.
    BTW, I installed the 7.6.3 update and pulled it back to 7.6.1 after up/dn speeds declined considerably.

  • Time capsule 1st generation - extension with air port extreme

    My parents use a time capsule (1st generation) as wireless lan device. As they run a boarding house they wish to provide free internet access to all of their guests (in all rooms). Therefore I bought an air port extreme station to extend the network as this product now (finally) includes the option »guest network«.
    The question is the following: *Should I keep the time capsule as basic device connected to the modem and use the air port extreme as extension or do you recommend to set it up vice versa?*
    I checked the range of the time capsule: It can be used in already in the first floor but not in the second anymore.
    I am really unsure how I should approach this topic and I hope more expirienced users can provide some help to this issue. Maybe you can also give me some security advice. In order to protect kids from misusing this new possiblity I was thinking of using opendns to block certain websites. Maybe there are also betters ways of doing this?

    Need a bit more info.
    Now this is what happens when I plug it in:
    Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
    It sounds like you have not done the setup.
    The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
    If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
    Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
    Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
    Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
    Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

  • HT3546 How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.

    How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.

    In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
    The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices.

  • Air Port Extreme Remote Administration?

    Is it possible to administer the Air Port Extreme remotely?
    My Linksys router has been doing OK lately, but have been noticing issues like speed latency.  I think this is true not only since another B or G Wifi device connected to the router causing the rest of the speeds to decrease, but also since I moved into a location that has many WiFi hotspots - specifically my condo complex.  My conclusion is buying a dual band wireless router which probablt has a larger WiFi range too.  I am debating on whether or not to buy the Apple Air Port Extreme Base Station or one of the top 3 Linksys E Seriers routers (E2500, E3200, E4200), since I have 2 iPads, an iMac, 2 iPhones, 2 Apple TVs, 2 Windows 7 laptops, 1 Windows XP desktop, XBox 360, Nintendo Wii, and 2 WiFi enablesd Blue Ray Players.  I saw that I was able to access all of the devices with the Air Port Extreme Base Station - great!    Air Port Extreme Base Station works great with all of the Apple devices, stops latency slow WiFi speeds and can have a USB hub attached to allow for a printer, multiple HDs [Time Machine Backups, YAY], etc.  I am leaning towards the Air Port Extreme Base Station, but have two reservations:
    (1) WEB BROWSER: I cannot administer the Air Port Extreme Base Station via a web browser and am forced to install the software and
    (2) REMOTE ADMINISTRATION: I cannot make any changes to the Air Port Extreme Base Station remotely, say if I'm at work, forgot to open a few ports and NAT/PAT, to access my computer.
    I would buy the Air Port Extreme Base Station if I can at least get through one of these two reservations.
    Please help.

    <Yes, the newer AirPort Extremes running 7.4.1+ firmware, can be administered from a remote location ... of course, you would still require the AirPort Utility to do so.>
    I am looking to set up remote access to my Airport Extreme that is running the latest firmware. Can you describe what I need to do to do so?  I do not have a static IP so will have to use something like DynDNS I assume. My needs are pretty simple. From time to time my Airport drops out (I'm guessing after a power outage) and while the Cablevision modem restarts, my Airlort is often left flashing orange. This would be fine except that this is all at a weekend house that is 90 miles away and I need the wifi to be working so that I can access my Nest thermostat as well as my Insteon system for remote light management.

  • Multicast (IGMP) in new  air port extreme??

    multicast (IGMP) in new  air port extreme??

    You can get to IGMP settings going to AirPort utility. In network tab there are extended network options tab then enable IGMP tracking (or something like this, I don't know how it named in english version)
    Ed.
    But! If you enable this option, this won't get multicast to you.
    You still won't connect to multicast streams on 224.0.0.0-224.0.0.255
    Message was edited by: A1l3

  • Thinking about purchaseing air port extreme

    i was just curious of purchaseing one since my time capsule died more then once but dose the new air port extreme work with all game systems such as xbox360/ps3/wii?

    to be quite honest since i had time capsule airport was great, rite now im running off of u verse wifi witch turns off and on for no reason, but when i had TC connected with the u verse router it was alot better but the only part i noticed poorly was the fact that reception would be fluky around the house.

  • How to get telnet to work on Air-port Extreme

    Hello...
    Iam a beginner, and need your help.
    How do I open at port at my Air-port Extreme. I need to log on to a NAS with a program PyTTy. Im told to use telnet 13131.
    Can anyone help me making settings so telnet will work?
    Thank you very much.

    Sinding, Welcome to the discussion area!
    Opening a port is only necessary if you are out on the internet somewhere and you want to access something on the connected to an AirPort Extreme base station (AEBS).
    What is the NAS connected to? What is your computer connected to when trying to access the NAS? If they are both connected directly to the AEBS (wirelessly or via Ethernet) there is no need to open any ports.

Maybe you are looking for