Air port not working
Hello,
I have a problem with connecting to wireless internet.
I have an airport Extreme card.
My computer usually recognises a wireless connection for about 10 min then disconnect, then sometimes finds it again for even shorter period of time.
It isn't about the network as I've tried it on different network and other mac user could connect to those.
Can anyone help me locate where the problem come from?
Do I need to change my airport card?
Thank you for your help,
Fanny
This will be a funny question, but it's better to ask. After you disconnected your iBook from cable modem, did you plug the ethernet cable to your router? I believed it's also a good practice to completely turn off your cable modem and your router while swapping/plugging the ethernet cable from your modem to your router.
iBook 1.42GHz Mac OS X (10.4.5) Alienware Area51mm
Similar Messages
-
I routinely connect and disconnect my iBook G4 from my cable modem. With each transition it takes a few seconds for the machine to reconfigure how it is accessing the internet, but then everything is fine.
Well, for whatever reason I cannot figure out, now when I disconnect my computer I'm unable to aquire a wireless signal.
I have a Linksys router hooked up, and it is working, but for some reason my Air Port isn't reading it anymore.
I try checking the network settings, but it still doesn't fix it.
Can anyone help me?
Thank you,
Jon
PS - Please let me know if there are any other details about my set-up that you need to know to help figure out my problem. Somehow I'm sure this will boil down to "User error", but I just don't know where I'm going wrong. I'm not doing anything different than I have before.This will be a funny question, but it's better to ask. After you disconnected your iBook from cable modem, did you plug the ethernet cable to your router? I believed it's also a good practice to completely turn off your cable modem and your router while swapping/plugging the ethernet cable from your modem to your router.
iBook 1.42GHz Mac OS X (10.4.5) Alienware Area51mm -
HT4262 WI-Fi not working says air port not configured
Wi-fi not working says air port not configured, help]
Life is getting more complicated to do support..
You need to tell us what version airport.. extreme or express and the model number. A1xxx from the label.
You need to tell us OS.. if the profile which says 10.6.8 is wrong.. as that is confusing.
The new AC version Extreme needs 6.3 version airport utility which is only available for Lion or mountain Lion.
You might also need to turn on ipv6 local-link to get it to show in the utility. -
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
MSI GAMING 5 - ALL USB ports not working
hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank youQuote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D -
I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement. -
Touchsmart TX-2 fingerprint scanner and USB ports not working
Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advanceHi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713 -
My usb port not work and hot usb port aria please help me
my usb port not work and hot usb port aria please help me
Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Hp 15-D018TU USB SS PORT NOT WORKS
Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in AdvanceHi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1 -
MacBook Air superdrive not working 10.7.1
Hello,
I have been working on two Macbook Airs. One has 10.7.1 on it and the other had 10.7.0 on it. I can get the one with 10.7.0 to upload up the cd but not the 10.7.1. I updated the 10l.7.0 computer to 10.7.1 and now its having the same issue. I have tried connection the superdrive in both of the ports on the 2 computers. I tried another super drive and also go the same problem. Has anyone else seen this?
Thanks,
Topher NadauldI can confirm this behavior. My suspicion is that Apple is using a non-standard implementation of the USB interface to power the DVD drive. I don't think that the USB spec provides enough power for the drive.
The drive will not work in Mac OS X or Windows if it is plugged into a USB hub.
Message was edited by: mike1234i -
MacBook Air usb not working needs reinstalling os
My MacBook Air mid 2012's USB port is not working. I mistakenly formatted the hard drive. Now I need to reinstall OS Lion but the flash doesn't work and I don't have a backup to restore from. Any help please
Is Internet Recovery working ?.
If Command R doesn't work, try Command Option R -
Catalyst 2960S-LPS-L PoE only on specific ports not working
Hi,
we have Catalyst 2960S-LPS-L (48 Ports) here which in general works fine.
If i connect a Cisco Access Point (2602), it´s powered up via PoE, but on some ports this is not working; it just doesn´t power up. The port configuration is exactly the same. I rebooted the switch, but still the same.
Any ideas how to troubleshoot this? Is it possible, that the PoE capability on some ports is just broken?
Thanks
HeinzHi,
it did all this, but there are no irregularities. IOS is version 152-1.E2
#sho post
Stored system POST messages:
Switch 1
POST: MA BIST : Begin
FC 1 MBIST Test Passed.
DP Sg1 MBIST Test Passed.
DP Xg1 MBIST Test Passed.
NI 1 MBIST Test Passed.
FC 0 MBIST Test Passed.
DP Sg0 MBIST Test Passed.
DP Xg0 MBIST Test Passed.
NI 0 MBIST Test Passed.
UPB MBIST Test Passed.
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
#sho power inline
fti-mco01-ssw01#sho power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 84.7 285.3
2 370.0 56.7 313.3
3 370.0 169.4 200.6
Interface Admin Oper Power Device Class Max
(Watts)
Gi1/0/1 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/2 auto off 0.0 n/a n/a 30.0
Gi1/0/3 auto off 0.0 n/a n/a 30.0
Gi1/0/4 auto off 0.0 n/a n/a 30.0
Gi1/0/5 auto off 0.0 n/a n/a 30.0
Gi1/0/6 auto off 0.0 n/a n/a 30.0
Gi1/0/7 auto off 0.0 n/a n/a 30.0
Gi1/0/8 auto off 0.0 n/a n/a 30.0
Gi1/0/9 auto off 0.0 n/a n/a 30.0
Gi1/0/10 auto on 6.3 IP Phone 7912 n/a 30.0
Gi1/0/11 auto off 0.0 n/a n/a 30.0
Gi1/0/12 auto off 0.0 n/a n/a 30.0
Gi1/0/13 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/14 auto off 0.0 n/a n/a 30.0
Gi1/0/15 auto off 0.0 n/a n/a 30.0
Gi1/0/16 auto off 0.0 n/a n/a 30.0
Gi1/0/17 auto off 0.0 n/a n/a 30.0
Gi1/0/18 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/19 auto off 0.0 n/a n/a 30.0
Gi1/0/20 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/21 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/22 auto off 0.0 n/a n/a 30.0
Gi1/0/23 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/24 auto off 0.0 n/a n/a 30.0
Gi1/0/25 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/26 auto off 0.0 n/a n/a 30.0
Gi1/0/27 auto off 0.0 n/a n/a 30.0
Gi1/0/28 auto off 0.0 n/a n/a 30.0
Gi1/0/29 auto off 0.0 n/a n/a 30.0
Gi1/0/30 auto off 0.0 n/a n/a 30.0
Gi1/0/31 auto off 0.0 n/a n/a 30.0
Gi1/0/32 auto off 0.0 n/a n/a 30.0
Gi1/0/33 auto off 0.0 n/a n/a 30.0
Gi1/0/34 auto off 0.0 n/a n/a 30.0
Gi1/0/35 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/36 auto off 0.0 n/a n/a 30.0
Gi1/0/37 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/38 auto on 15.4 AIR-SAP2602I-E-K9 3 30.0
Gi1/0/39 auto off 0.0 n/a n/a 30.0
Gi1/0/40 auto off 0.0 n/a n/a 30.0
Gi1/0/41 auto off 0.0 n/a n/a 30.0
Gi1/0/42 auto on 6.3 IP Phone 7912 n/a 30.0
Gi1/0/43 auto off 0.0 n/a n/a 30.0
Gi1/0/44 auto off 0.0 n/a n/a 30.0
Gi1/0/45 auto off 0.0 n/a n/a 30.0
Gi1/0/46 auto off 0.0 n/a n/a 30.0
Port G1/0/44 is not delivering PoE; Port G1/0/38 has exactly the same configuration and it´s working. -
IPad air safari not working in iOS 8.1
I have an iPhone 5, 5S and ipad air all on version 8.1. Safari is not working on any of them. It tries to load, the blank safari screen comes up, then it crashes and goes back to home screen. I have to use google chrome to access the internet. I tried restoring my one phone to factory, installed the backup, reset the safari data, reset network settings and still no help. Can anyone tell me how the **** to delete safari and re-install it? I don't know what else to do about this issue.
Here's one URL copied & paste properly, hope this helps!
Thank you for looking into this issue...
http://www.geocaching.com/error/error.aspx?aspxerrorpath=/seek/cache_details.asp x -
Hdmi port not working on HP Pavilion g7-2240us Notebook PC
I can't get my HDMI port on my on HP Pavilion g7-2240us Notebook PC to work... Can someone please help me? (it's windows 8)
This is ridiculous - the number of hits that come up for "Pavilion g7 HDMI not working" is astounding; yet finding a useful answer, or anything resembling a useful answer other than a document that instructs 4-yr olds on how to locate an HDMI port, is impossible.
HAS ANYONE FOUND A SOLUTION TO THIS? Or is this a rampant model-wide issue that HP would rather not acknowledge?
Maybe you are looking for
-
Help me?! graph card problems when trying to play games on mac in wmvare-windows 7
I know that you aren't suppose too play games on mac. But I bought a iMac 27" Processor 3,5 GHz Intel Core i7 Minne 16 GB 1600 MHz DDR3 Grafik NVIDIA GeForce GTX 775M 2048 MB and I installed wmvare and windows 7 so I could do gameplays for my YouT
-
Iphone 5 new carrier update problem or glitch?
A few hours ago I decided to reset my phones data and settings. I haven't done this since I got it last year and it was acting a little slower than usual and I thought it would help the perfomance of the phone, I had downloaded a lot of apps. Anyhow
-
How to deploy adapter module ------- in XI
hi forum, i have developed a ejb adapter module from a blog, i developed it in the NWDS, i now want to deploy it, how should i deploy it, i dont know anything about Visual Admin or SDM, pls help me out Message was edited by: sudeep dhar
-
Hi everyone! Thanks in advance for any help somone can provide! I can no longer upload photos, which sucks. I get an error message thats says : The ODBC data source returned the following error: "[Microsoft][ODBC Microsoft Access Driver] The search
-
Who do i contact to help sort out my Icloud accont
i think someone has changed my details in icloud. i try to change my password but the emial does turn up to any of the accounts i know.