Air Port Xpress and iTunes 7.1 Mac problem

Hi, I have updated to iTunes 7.1 and updated airport (I have both an extreme for internet and an express just for music) since those last 2 updates I cant see my remote speakers in itunes....
Someone has an hint on that ?
Thx.

Running iTunes v 7.1.0.59 and Bonjour v 1.0.3 in Win XP with Airport Express on Linksys wireless network
After losing AirTunes, I uninstalled Bonjour. I regained functionality of AirTunes, but was unable to print to my printer connected to the Express. Reinstalling Bonjour gave me back my printer AND AirTunes, until I restarted iTunes, then I was back to the beginning.
Implications of stopping the Bonjour service:
- iTunes 7.1.0.59 can now find my speakers
- I am unable to print to my printer that was attached to the Airport Express via Bonjour.
Looks like iTunes breaks a perfectly good device.
Windows XP Pro

Similar Messages

How can I transfer music and iTunes from my mac to my iPhone?

I have a macbook air and need to transfer some of my music and itunes from my mac to my newly updates iphone4. Previously I used to drag what I wanted from my itunes to my phone but now it doesn't work. Any ideas?

First step, of course, is to plug your iPhone into your Macbooks Air. Then, you need to set up syncing how you want it in iTunes (on the MBA). If you want to be able to drag and drop music, select "manually manage music" on the Summary pane in iTunes.

Air port express not found by my mac

Hallo all, I want to extend my wlan, therefore I want to install an additional air port. I have already a time capuse with air port. Now my question:
Do I neet to connect the new air port with a wire? I thougt the connection is wireless? Unitl now the new air port is not found by my mac within the utility air port program. Why? Please help! Thank you, Kailash

To help facilitate setting up your extended network, I would recommend the following:
Perforrm a "factory default" reset on the AirPort Express base station.
Temporarily connect the Express to the Time Capsule using an Ethernet cable between them.
Once you have configured the extended network, you can now disconnect the Express from the TC and place it at the desired location.

Share snapshots here, Air Port Extreme and 2 Air Port Express are working

is there a way to attach snapshots here
after 1 week I fig out how to get it to work in windows XP using my FIOS router and my Air Port Extreme, but before anything make sure you have the MAC address of all the Apple devices
As I config my devices(Air Port Extreme and 2 Air Port Express) I took snapshots since I did not want to go through this again

Unfortunately, if the light is out, the outboard power supply has failed, or the internal power supply has failed.
If you have a voltage tester, check the outboard power supply for 12 volts. If it delivers 12 volts, then the internal power supply on the AirPort Extreme has failed, and you will need to replace the AirPort Extreme.
If the outboard power supply does not work, you might be able to replace that outboard power supply to get things working again.
Take the AirPort Extreme to an Apple Store....if you have one near you.....to let them take a look.

How do i sync my iPhone 5 with my iCal and iTunes on my Mac OS X 10.5.8?

How do i sync my iPhone 5 with my iCal and iTunes on my Mac OS X 10.5.8?

An iPhone 5 requires Mac OS X 10.6.8 or newer to sync.
(77831)

Air Port Express and Comcast

I have been trying with no success to get a connection with my Air Port Express and my comcast DSL internet. I am able to connect with a direct ethernet connection however, I don't want to be using my computer in my bed room all the time and would like the freedom. Does anyone know how to help me out. I spoke with Comcast they won't help as it is not their product...please anyone...

Unplug the modem from the power. Reset the AX to its factory defaults and reconfigure the base station using the AirPort Admin Utility. Your connection is via Ethernet and DHCP (your Comcast service is cable, not dsl, is it not?). If it is dsl, the connection method should be PPPoE. Tell the base station to distribute IP addresses using DHCP. Make sure your computer System Preferences>Network has PPPoE DISABLED. Plug the modem into the ethernet port of the AX. Now power up the modem. Can you connect?

I have nothing on this macbook air just iPhoto and iTunes and the error startup dic full message keeps coming up and the storage is full of other i don't know what to do.

i have nothing on this macbook air just iPhoto and iTunes and the error startup dic full message keeps coming up and the storage is full of other i don't know what to do.how do i delete all of this?

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
See if this helps
http://support.apple.com/kb/TS2845

What are the dashed line in air port express and air port extrem

what are the dashed line in air port express and air port Extrem

The dashed line represents a wireless connection between the base stations.

Both my apple TV and iTunes on my mac are turned on. My apple TV shows that it cannot connect to Apple, while the wireless network is working

Both my apple TV and iTunes on my mac have the Home Sharing turned on. My Apple TV is configured to my wireless homw network, yet for some reason, I cannot connect to iTunes. I get a message that says: "cannot connect to Apple. Check your netwrok connect or try again". Is there any steps that I am missing?

Welcome to the Apple Community.
Are you trying to connect to iTunes on your mac/PC or the iTunes store.

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Air port express and ipad, iphone, apple tv

i have my audio speakers plgged into my 3 air port express for 3 rooms in my house. when i use my old apple tv, i can play my music on all 3. however, on my ipad, itouch and mac computers, i can only do one at a time. Why?

The iPod Touch does not have the "Multiple" speakers function.
You only get one choice.
I have 3 Airport Express units and this is just the way Apple has it setup for the iPod Touch.
You should be able to choose all 3 on your Mac.
Look at the bottom right of your iTunes window and you should be able to choose multiple speakers.

How to open ports 119 and 443 in my Mac?

I've been trying to use the UseNeXT software with my Mac with no success. I called their support and they told me I need to open the ports 119 and 443. I contact Apple support and they told me that is beyond their scope (???).
Can somebody help me with that? I tried to find it online, but all tutorials that i tried didn't work or are outdated.
Thanks

Hi Drew,
It probably depends on the router as to the method used to open the ports.
As I have said elsewhere in the thread the first 1024 ports are open in most router to allow things to work Out of the Box such as Mail (110, 25, 567, 569, 995, 996 and many more ) and web Browsing (port 80 mostly but secure site can use 443) FTP (21 and 22) to name some.
Port Forwarding is one way to open some of the ports for One IP (computer).
Most routers have table for doing this and this can be limited as to the number of ports included.
This Linksys pic shows how to do it for some as it allows groups based on Start and end ports. However it restricts it to one IP
DMZ is a form of Extreme Port Forwarding that opens all 65535 ports to one IP (Computer)
In both the above cases other computers (IP addresses) are excluded from using the ports.
Port Triggering doe allow multiple computers to access the same Port but requires that you know the lead - Trigger - port involved for each app.
It is limited by the table size for your particular router.
Same Router in Trigger ports for iChat 3
Most router come with UPnP nowadays.
It is an ON/Off setting that allows the apps on the computer to say which ports are needed and when.
On some you can reduce the time to live and the Hop amounts.
The ports stay open from a period of normally 30 mins after non use.
This can be changed.
It also tends to list the number of Hops (the number of devices beyond the UPnP device) that it can be heard.
My Sky Hub
I have no other router on my network but I do sometimes use Internet Sharing between two computers hence the 2 Hops.
Every other device is only one Hop away from the the router.
There are concerns that the "Advertisement" is seen upstream (internet side) as well as device downstream.
The Concern is that this could be Up to your ISP and then down to the "next" IP end user on the particular router/server at the ISP end.
I have seen no evidence of this being the case.
Hope this helps.
8:45 pm Monday; May 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Ports 139 and 445 dangerous on Mac OS X?

I have a Mac OS X iBook that is sharing files with Windows XP PC using SMB.
When I start up my Mac the Norton Firewall ask me whether or not I want ports 139 and 445 to connect.
I know that port 139 should not be open for a Windows computer because of the NetBIOS component.
Are ports 139 and 445 dangerous for a Mac?
iBook G4 Mac OS X (10.4.3)

You may want to create an item in /Library/StartupItems.
See the following links for information:
http://developer.apple.com/techpubs/macosx/Essentials/SystemOverview/BootingLogin/Customization_Techniques.html
http://developer.apple.com/techpubs/macosx/Darwin/howto/system_starter_howto/system_starter_howto.html
http://developer.apple.com/techpubs/macosx/Essentials/SystemOverview/BootingLogin/The_Boot_Sequence.html
I have not tried this as yet.

Lightroom Slideshows and iTunes Music on Mac?

How do I use an iTunes Playlist on my Mac as audio for a Lightroom Slideshow? I have the latest Lightroom and iTunes versions.
Kevin

http://discussions.apple.com/thread.jspa?messageID=5350300&#5350300
See the above discussion. I believe (but to be honest, I am no expert. I am trying to figure out a different, but related question) that you can reformat your iPod to the FAT32 system on your PC, then go back to your Mac, use it as a hard drive, and transfer your songs to your PC that way. Once in the FAT32 format both PCs and Macs will read the iPod disk.

Air Port Xpress and iTunes 7.1 Mac problem

Similar Messages

Maybe you are looking for