Air print ? Brother DCP 7030
is BROTHER an air print device and how di I have to connect to my ipad
No. See here: http://support.apple.com/kb/ht4356
You may be able to print using a printing App from the App Store like Printopia, PrintCentral, etc.
Similar Messages
-
I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions. It would be great help.
Dinesh from NepalMac OS X 10.6.8 is the current incarnation of Snow Leopard, and fixes various issues in earlier releases.
Current versions of Mac OS X 10.6 include the necessary printer driver for the Brother DCP-7030 printer (HT3669). (The asterisk footnote on that printer indicates there was a recent update via Software Update, so get to current 10.6.8 and ensure the Brother printer software update has been selected and loaded.)
If you're on the current Mac OS X version and if have the Brother update loaded (from Apple) and if problems with the printer persist, then remove the printer from your current Mac OS X configuraton, and re-add it, and see if that clears the particular issue(s) you're having with this printer.
From experience, the Brother software for Mac OS X is a little odd, and the older software stuff (and particularly around the scanner controls for their multi-function series) were, um, unusual, and a little unstable. Printing generally worked fine, though. Recent versions of the Brother software are working better including for the scaller, but the UIs and the set-up are both still odd. If you're using the box as a printer (I haven't looked at the DCP-7030 features), then you're best using the Brother software that arrives from Apple and not the software from Brother.
Also ensure the printer firmware is current. That's corrected some odd behavior on some Brother printers. -
[solved] printer - brother DCP-J315W - "sending data to printer"
Hi All,
My sister have a printer brother DCP-J315W, connected with usb.
I installed the brother-dcpj315w package from AUR, and it used to work without issue.
But I was informed "recently" that this printer is not working correctly since perhaps two months. (perhaps it's related to the AUR package update, but I think it's was already not working before the update.)
When I try to print, there is no activity on the printer, and, using the cups web-interface, I can see, for the printer status: "idle - sending data to printer"
I'm not sure about what I see in the logs, there are some failure about systemd and avahi service, when I try to print, perhaps it's the issue, but I really don't know.
journaltct -f - when I try to print a test page.
/var/logs/cups/error.log - for this day, with a debug log level, and when I added this printer and print a test page.
It tried to not use the usblp kernel module without success, the printer is not recognized by cups without this module loaded.
So, I'm quite lost with this issue.
Cupsd info:
/etc/cups/cupsd.conf
Printer info
Bus 003 Device 002: ID 04f9:0254 Brother Industries, Ltd
lsmod | grep 'usb'
usblp 13011 0
usbhid 41358 0
hid 86421 2 hid_generic,usbhid
usb_storage 43828 0
scsi_mod 130423 4 usb_storage,libata,sd_mod,sr_mod
usbcore 174164 5 usblp,uhci_hcd,usb_storage,ehci_hcd,usbhid
usb_common 955 1 usbcore
If you have any idea to help me debug this issue, I'd be grateful.
Thanks a lot to read this.
Last edited by gyan000 (2013-03-16 13:29:13)Hi again,
Issue solved, I had to execute this commande after the package installation:
/opt/brother/Printers/dcpj315w/cupswrapper/cupswrapperdcpj315w
I contacted the package owner so he can update his package.
Thanks
Last edited by gyan000 (2013-03-16 13:29:42) -
HT4356 how to configure airprinter for printer brother dcp-j315w
i want to configure airprinter for Printer Brother DCP-J315W. how to do it??
You can't, that is not an Airprint compatible model. See if Brother has an app you can use to print.
-
I can not install a printer brother dcp-375CW after installing mavericks, what can I do
I can not install a printer brother dcp-375CW after installing mavericks, what can I do
Have you tried to get the latest drivers?
http://welcome.solutions.brother.com/bsc/public_s/id/os/macintosh.html
Also, I would suggest posting in the Mavericks discussion page. This page is for the music app MainStage.
Hope this helps! -
Wifi printer (Brother DCP-J315W) not working after Yosemite 10.10.1
We have a wifi printer with an ethernet cable to a Technicolor TG582n router. My husband's pc (Win 7) is able to print wirelessly. I was able to print from my Mac (OS X 10.10.1), although sometimes I had to turn the printer off and on again. I was trying to fix this problem when I deleted the printer but when I went to add it again, it was not offered. I have updated the driver software. I have tried using the printer's IP address with both IP Protocol and LPD but I get the message "Unable to verify the printer on your network. Unable to connect to "xxxxxxxxx.o64" due to an error. Would you still like to create the printer?"
Have tried turning it all off and on but to no avail. On the Printers and Scanners window, the Default printer is Last Printer Used, and I cannot change this.
Going slowly doolally!Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
Troubleshoot Printing Issues - Yosemite
WiFi Printer to WiFi Network - Connect -
Problem with Brother DCP-J315W configuration
I just bought new printer, Brother DCP-J315W, but it seems, that there is no arch/aur package with drivers to this machine. I downloaded deb packages from brother's site, and converted them to tar.gz, then copied the files from this archives to my directory tree. CUPS finds my printer with web interface but all the jobs print "Unable to locate printer 'BRW0022585243C3" error.
IIRC you need to run a couple of those Brother scripts as root before CUPS will register the driver correctly. I think the scripts in the cupswrapper and lpd directories need to be be run first. Then resetup CUPS as usual.
-
Brother DCP-J315W doesn't work
Hello everyone. I like Archlinux a lot, I just have a problem with my printer, Brother DCP-J315w.
It is working on linux, Brother shares packages in .deb and .rpm for it, it worked for me on Linux Mint earlier.
Now, on archlinux I have downloaded and installed AUR package for that printer from http://aur.archlinux.org/packages.php?ID=49576 .
With that AUR pkg i have add the printer through CUPS (localhost:631), but when I try to print anything, cups responds: Unable to find printer.
I am connecting to my printer via wifi.
Any clues?
Best Regards,
SzadThis page helped me get my Brother printer working. Maybe you will find what you need there. Check that you have the avahi daemon running.
https://bbs.archlinux.org/viewtopic.php?id=109570 -
I need to print from my Brother DCP J315W wireless printer. I don't really understand this Air Print concept and have not heard of it before, is it only on certain printers? This printer is new and I would like to be able to link it up with my IPAD 2
Any help would be greatly appreciated.
RayAirPrint is only possible on some HP printers at the moment (the models are listed on this page http://support.apple.com/kb/HT4356). There are apps that allow you to print to other printers (I havn't got any of them but I've seen apps such as Print n Share and Print Central mentioned), which can print via your pc/mac
-
[SOLVED]Can't print to my Brother DCP-7065dn after upgrade to systemd.
Hi All,
I have a pure systemd installation and I'm having issues printing. I have a Brother DCP-7065dn which works well on my Ubuntu laptop with the drivers availible from Brother. I downloaded and installed the drivers for this printer from the AUR and added the printer to cups (both lpd and usb). When I print a test page cups reports that the job completed succesfully but the printer does not print. Not sure what is wrong. Has anyone else had printing issues after upgrading to systemd? Any thought on how I can get this printer working?
Thanks
Edit: BTW. Brother offers deb and rpm packages for their Linux drivers. I installed the deb packages on an Ubuntu machine and I can print over the network (lpd) with no problems. I also installed the brother on may arch system using the wrong drivers just to see what would happen. Using the DCP-7045N Foomatic/Postscript driver I can communicate with the printer (progress) but printing a test page results in the printer spitting out a lot of blank pages. I can also print to an HP from my arch laptop with no problems. So the issue seems to be with the drivers for the Brother DCP-7065dn from the AUR. Not sure how I'm going to fix this. I can't install the rpm or deb packages on my machine. and I don't want to switch to a red-hat or debian system if I can avoid it.
Final Edit: SOLVED! I need to learn to go back and read comments. In the AUR there was a comment regurding this exact issue. I needed to enable multilib repository and install lib32-glibc. Now it works. \(^_^)/
Last edited by darthpenguin (2012-10-04 08:41:29)Matthew Poor wrote:
The iMac spooled its print job, then replied "communication error". I repaired permissions, restarted everything, and same result.
Did you add the printer using Bonjour or did you select one of the IP protocols? If the latter, then you cannot use IPP. The Canon MF driver supports LPD or HP Jetdirect.
Matthew Poor wrote:
Updated to Canon driver 10.2.0, printer is still not appearing in the list.
If you mean that after you change the USE menu to "Select printer software" and the Printer Software window is empty, then try restarting your Mac. This can rebuild the printer list.
Matthew Poor wrote:
Both Canon MF background items are running according to Activity Monitor.
The new MF v10.x driver does not install or use the MF Background process. So this process is a leftover from a previous driver. I would therefore recommend you trash the older driver files and run the v10.2.0 driver installer again.
Depending on the version of driver you had installed prior to upgrading to Mavericks, the name of the folder can be different but will reside in /Library/Printers/Canon. Here you will see BJPrinter and IJScanner. Leave them alone and just remove the one or two that have MF in the name.
You then need to navigate to /Library/Launch Agents/ and trash any Canon plist file. Then restart the Mac and run the Canon MF v10.2 installer again and then see if you can add the MF8350. -
Need help to get my Brother DCP-J125 printer working again
I'm totally stuck here. I had this printer working and now after a few months it doesn't work anymore.
I tried it with/without usblp. Tried it by installing the drivers myself and by installing the drivers with brother-dcpj125 from AUR (and I did run the script that comes with the drivers). Readded printer several times, reinstalled cups several times. The printer doesn't print. I think cups doesn't find the printer... (The scanner works btw)
$ lsmod | grep usb
usb_storage 44760 0
usbhid 36812 1 hid_logitech
hid 85608 3 hid_generic,hid_logitech,usbhid
btusb 11892 0
bluetooth 193532 10 bnep,ath3k,btusb
scsi_mod 133152 6 uas,rts5139,usb_storage,libata,sd_mod,sr_mod
usbcore 147434 9 uas,ath3k,btusb,uvcvideo,rts5139,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
/var/log/messages.log
Connecting the printer:
Sep 23 16:55:34 localhost kernel: [ 2855.013082] usb 2-1: new full-speed USB device number 3 using xhci_hcd
Sep 23 16:55:34 localhost kernel: [ 2855.029232] usb 2-1: ep 0x85 - rounding interval to 512 microframes, ep desc says 800 microframes
Sep 23 16:55:34 localhost kernel: [ 2855.029994] scsi8 : usb-storage 2-1:1.2
Sep 23 16:55:34 localhost mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1"
Sep 23 16:55:35 localhost mtp-probe: bus: 2, device: 3 was not an MTP device
Sep 23 16:55:42 localhost dbus[644]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Sep 23 16:55:45 localhost kernel: [ 2866.038840] scsi 8:0:0:0: Direct-Access Brother DCP-J125 1.00 PQ: 0 ANSI: 2
Sep 23 16:55:45 localhost kernel: [ 2866.099179] sd 8:0:0:0: [sdd] Attached SCSI removable disk
Sep 23 16:56:12 localhost dbus[644]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Disconnecting the printer:
Sep 23 16:57:37 localhost kernel: [ 2977.838261] usb 2-1: USB disconnect, device number 3
$ lsusb
Bus 002 Device 004: ID 04f9:0253 Brother Industries, Ltd
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 23. Sep 16:59 /dev/bus/usb/002/004
# lpinfo -v
network ipp
network beh
network smb
network http
network socket
network https
network lpd
network ipps
file cups-pdf:/
direct hp
direct hpfax
$ /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=13
DEBUG: Switching USB device configuration: 0 -> 1
DEBUG2: Printer found with device ID: Device URI: usb://Unknown/Printer
direct usb://Unknown/Printer "Unknown" "Unknown" "" ""
Any idea what's wrong? The printer worked perfectly a few months agonTia89 wrote:start posting the pacman's log....
This is everything I installed or upgraded since March. Do you need the whole log?
https://raw.github.com/gist/3d718d6781d … tfile1.txt
David Batson wrote:
You probably need to change the URI in CUPS. See the following for some tips.
http://welcome.solutions.brother.com/bs … prn1a.html
http://welcome.solutions.brother.com/bs … _prn3.html
I can select the driver for my printer when I modify the printer, but the "Connection" stays "usb:/dev/usb/lp0".
Last edited by slosd (2012-09-23 22:56:49) -
Macbook airport extreem and brother printer/scanner DCP-330C
I have macbook airport extreem and brother printer/scanner DCP-330C and everything works fine.
I can print wireless.
The only thing that irritates me is, when I start my macbook I first see a screen with MFL-ProSuite, I quit then a screen with connect with USB, I quit and then I see a small blue screen.
Is there a way to get rid of these things, so I can start directly with the things I want to do.
Thanks for the reply.
FrankThat is something that has to do with the brother software. Doesn't have anything to do with the airport base station.
I would try and Contact brother to see about disabling it.
What I think , is probably because the printer is on the airport not the computer so brothers software is getting confused.
See about deleting just the software and not the drivers. That is if you dont need the software.
Message was edited by: Edwin Silva -
Brother DCP 130C Printer not connecting tO mac OSX 10.6.8
Following the upgrade to Mac OS X Snow Leopard my Brother DCP 130 C Printer not working have tried downloading upgrade without success
I have to raise a different view point. Many users of macs are ordinary, non-techie people, who simply want a machine to do basic things. I know people with very old macs, and they are happily using them for simple purposes. I have 10.6.8, and any upgrade would cost me some money to upgrade parallels. Macs can run for years, and I believe that it is important for equipment to be able to be used for long periods of time, if the user wishes. Also, earlier OS are very commonly unsed in coutries where money and internet is not as available as to many of us.
I also use a mac with XP as I need a small install base for only one PC based software that I occasionally use.
As a developer, I would expect them to look at the actual installed back of OS, and realise that some simple functionality should be backward to existing users. The ability for a phone to connect to earlier OS is something which I did not even think about - I thought it would be automatic. Its also not that difficult to develop.
The forums are awash with frustrated new pruchasers of Lumia phones, suddenly realising that their expected functionality with PC Suite, etc has now gone. Many of those people are very frustrated, and they will pass on their frustrations to others, and sales will be affected.
I have been a Nokia user now for about six years, and I have watched the same frustrations of users, requesting Nolia to develop expected connection, integration, and sync software that other phone manufacturers seem to be able to do. Finally, a reasonable PC Suite version is now developed, but not compatible with Lumia?? Do we have to go through the whole waiting thing again? Why cannot Nokia look at this not as a software problem, but an expected functionality feature. -
Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated. -
Brother DCP-120C does not print
I am having issues with my Brother DCP-120C. It worked well a while, but now i encounter some problems.
When starting the cups daemon i get this error message in my error.log:
E [13/Jan/2010:19:11:25 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I installed the brother-mfc210c-fixed-version package beforehand.
Any ideas?
Last edited by Alp (2010-01-14 08:10:49)Additional information:
The cups daemon starts anyway, even with the error message. In the cups web frontend i see my installed printer (MFC210). If i print a testpage or something else, a print job is created but never executed. Cups seems to wait endlessly until something happens.
Maybe you are looking for
-
Job Scheduling using job_close
Hi gurus, im trying to scheduke several jobs using the FM Job close, but the jobs are running paralel.. The first job its' schedule with a start date or imediate, and the letf ones are schedule to start after his precessor finish, but once i run the
-
ITunes Closes When I Try to Watch Downloaded TV Episodes
I'm ready to tear my hair out, so if anyone has any suggestions or advice to help me, I would be so grateful. I have installed the latest version of iTunes (8.0.2.20) and have downloaded several tv episodes. When I first tried to play the downloaded
-
Is it difficult installing new hard drive in a 15mth old iMac (24" intel)?
Hi all, A little bit of background: My iMac became progressively slower and slower - especially when writing to the hard disc. I re-installed the OS which did not fix things. Disc repair couldn't repair after booting from CD. (Can't remember the mess
-
I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours.. so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anythin
-
I would like to be able to input other European languages (besides French, German, Italian and Spanish) on the phone. Is there a way to download appropriate character support?