Air print form my Iphone prints large text

With new ios7, the air print behaves weired. When I send document to print via IPhone, it prints very large text. I use Cannon Pixma Mx 712 printer and the firmware is up to date. When I print the same document from my pc (wireless) it prints fine. What is happenning.

I use Printer Control App to control size of image.
http://i1224.photobucket.com/albums/ee374/Diavonex/324a892c900baf3a0fa48131dfd64 f06_zpsc29a6574.jpg

Similar Messages

Forms: How to add large text without getting wrapped

hi Waveset/Sun IDM folks,
I need to add a large text to the form via a Field at the bottom of the Form. So using Title and SubTitle form properties is not an option.
When I use Label/Text/TextArea type of Fiels, I see that the text is getting wrapped as if it is a label for a text box or text area or Radio.
I do not have an option of using Title and SubTitle properties of the Form as the text appears at the middle and bottom of the page. What options do I have?
My form has :
SectionHead:
FirstName: <Text>
LastName: <Tex>
Address: <Text Area>
Contract(Section Head)
<Large text needs to go here>

ok, nevermind, Using FieldType-Panel and adding Label fields in it worked out fine for me. Issue closed.

How can I see a contact's entire phone number when iphone has large text?

Hi everybody,
I changed the font on my mom's iphone 5 to a larger size (but not the largest available) so it's easier to read. However, now when trying to view one of her contact's phone numbers, the number cuts off at seven digits and follows with dots, for example "(123) 456-7..."
Perhaps it's a silly question, but how can I view the entire number without reducing the font size? When I try to select the number it dials the contact. I wouldn't want to cut and paste, or copy it every time just to see the entire number. Any help would be much appreciated!!!!!

The contact in which the photo does appear (along with the contact's name as well) is one that I added myself. I have photos added for many of the people in my Contact List, but neither their photo nor their name appears to me whenever they call or text me.
I know how to add a photo to a contact's information within my Contact List. I need to know how I can make that photo (or even the contact's name) appear whenever I have an incoming call/text from them. What I am seeing is just their phone number, and I do not know everyone's phone number well enough to recognize from whom I am getting a call/text. It would be much easy if their photo or name appeared instead.
TYSM for your speedy reply to my query, but the information that you have provided does not solve my issue.

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

Printing hidden text in a PDF form

I have created a form to be filled in by a large customer base. Some boxes have the ability to type in more copy than the box will fit creating a scroll bar.
My problem is then how does the user print the text that is hidden I just get the copy that can be seen and nothing else.
Here's hoping for a reply.

Select the whole text.
Copy the text in a text editor.
Print the text.

I have air printer that works on iPhones but not iPad 2

I have air printer that works with both iPhones but not with iPad2

Just to build on red_menace's answer a bit...
set MyText to do shell script "ps -A | grep '[M]ac VNC 2.1.app' | awk '{print $5}'"
log "MyText=" & MyText
set content of text field "Dir" of front window to MyText
The log command will write the results of the "do shell script" to Xcode's run log window. If you see the correct output there then you know that part is working correctly and the problem is in the way you're trying to insert the string into the text field. Maybe "Dir" doesn't match the name you've given your text field in IB? Or maybe your text field is contained within another view, such as an NSBox or an NSTabView?
Also, I guess "of front window" should work in AppleScript Studio but I always give my windows AppleScript names in IB and then explicitly specify the window in my scripts. Like this:
set content of text field "Dir" of window "MyWindow" to MyText
Steve

Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

jerryone1942 wrote:
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
It depends upon the capabilities of your printer. If you have an HP printer with a photo tray then the Photo app will print to whatever size you load in to that tray.
There's some more information here:
Using AirPrint to Print Various Photo Sizes
With other printers the user is given a choice from the printer's loaded paper sizes. You can see an example of that here:
The Many Faces of the iOS Print Panel

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

HT4356 all of a sudden I cannot air print from my ipad or iphone - I can still print from my laptop - don't know how to fix

All of a sudden i can no longer air print from my iphone 4S or my ipad 2
Need help
I can still air print from my Dell laptop

Hello rcappel,
Thank you for the details of the issue you are experiencing when printing from your iPhone and iPad. I found a couple of resources I recommend for the issue you described.
First, I recommend following these steps:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are still having trouble printing after following those steps, I recommend these steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to use Read_text in Smart Forms for printing Header Texts

Dear ALL,
I want to print Header Texts in SmartForms, For that
I am using T/Code VL02N .. and choosed Header ..
got this details... from Text Header.
Text Name       :0080000441
Language         :EN
Text ID             :Z002
Text Object       :VBBK.
So in Smart forms Under Template i have created a text and Program Code .
Inside that I have used this below code .
CALL FUNCTION 'READ_TEXT'
EXPORTING
*CLIENT= SY-MANDT
ID = 'Z002'
LANGUAGE = SY-LANGU
NAME = NAME
OBJECT = 'VBBK'
TABLES
LINES = IT_TLINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
IF SY-SUBRC 0.
CLEAR IT_TLINE.
ENDIF.
Kindly suggest me, Where to declare the variables and loops for using this Read_Text Syntax in Smartforms .
Response to this will be highly appreciated........
Regards ,
Vinoth.

hi
good
please check this code
CONSTANTS:
*For text reading like in LCNMMFTX / FORM SET_CONTROL_TEXT
           text_id like thead-tdid     value 'MATK',
           text_obj like thead-tdobject value 'AUFK '.
data tlines like tline occurs 0 with header line.
data tdname like thead-tdname.
data tdheader like thead.
if not it_proj-ltxsp is initial.
refresh tlines.
        tdname = sy-mandt.
        tdname+3 = it_proj-rsnum.
        tdname+13 = it_proj-rspos.
        tdname+17 = it_proj-rsart.
        call function 'READ_TEXT'
             exporting
                id        = text_id
                language = it_proj-ltxsp
                name      = tdname
                object    = text_obj
             importing
                header    = tdheader
             tables
                lines     = tlines.
            exceptions
               not_found = 01.
thanks
mrutyun^

How can I print a document on my iphone to a printer if I do not have an air printer?

How can I print a document/photo etc that is one my iphone to a printer which I use with my Windows computers? My printer is a Lexmark X4550 Wi Fi

Sorry based on this link IOS: air print 101 http://support.apple.com/kb/ht4356 your printer is not compatible.
You can take email yourself the photos and then print it out that way.

Air printer problem connecting to iphone

My iPhone is not connecting to the air printer. I can print from a laptop. The phone is connected to a home network. How do I get my phone to find the printer? thanks

see if the printer is compatible http://support.apple.com/kb/ht4356
set up and troubleshooting http://www.apple.com/support/iphone/assistant/airprint/

IPad & IPhone 4s Air print Issue

I have just bought a HP 6520, I''ve followed the instructions for the Printer, My MAC Pro works but then I hard wired it and installed the software with a Disc. This all works fine.
I've tried to print from my ipad 2 and Iphone 4s but it's unable to find AirPrint. I've tried turningoff the router, Printer, Ipad and Iphone, left it for a while then one by one starting with the router switched them all back on, and still no Air Print Found.
I've got the APP for this but when we bought the printer the Sales Person demostrated to us with his Iphone and was able to print from his phone without using the app.
Please could someone suggest what I could try next

for more info, check this article: http://support.apple.com/kb/ht4356
for this information:
Additional Information
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
Avoid connecting AirPrint-capable printers to the USB port of Apple AirPort Base Stations or Time Capsules. Doing so can enable traditional AirPort printing from a Mac, but it will not enable AirPrint functions for iOS devices. If you cannot use Wi-Fi networking to connect the AirPrint-capable printer, use an Ethernet connection from the AirPrint-capable printer to the Apple AirPort Base Station or Time Capsule.
Wi-Fi printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the printer is connected to the Wi-Fi network before attempting to print.

Air print using my Iphone and B110 printer.

How do I connect my B110 with my iphone using a third party application so I can print ?Air print.
thanks
Bernard

Have you enabled web....this printer needs an update to use airprint...if you have not...from the front panel select select apps then enable web services and follow the on screen instructions.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Printing formatted text from an Oracle form

I'm trying to print formatted text from an Oracle form without using the standard menu print. The print button on the menu prints out the text and the actual form. I just want to print the text that is displayed on the form. I would like to add a print button to the form. Is there a print function or event in PL/SQL?
Thanks in advance for any help!!
Jason

If you are interested in the content of the field you can loop over them (next_item built in) and write their content into a file using the TEXT_IO built in.
for nicer outputs check out Oracle Reports on OTN.

Air print form my Iphone prints large text

Similar Messages

Maybe you are looking for