Air print not working on my Iphone 6

When I try to print using my HP printer, my old  ipad finds the printer immediately and prints but my new iphone 6 which i have not updated from the original 8.0 reports that no air printers can be found? I am reluctant to download 8.02 until Apple have sorted out all the problems asociated with it. I have read the answer trotted out to other people with the same problem but I am convinced the problem is with the Apple software and not the printer. I would appreciate if someone could give me some honest fedback about what I really need to do.Or just admit that I will have to wait for 8.03 or maybe 8.09!

Here are some more fixes...
iOS: Troubleshooting Bluetooth connections - Apple Support

Similar Messages

  • HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter.  How do I resolve this?

    I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
    The phone gets WIFI from AT&T.  My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router. 
    That must be the problem.  How do I resolve that?

    For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
    Can you connect your iPhone to the Netgear router WiFi?

  • Air print not working with ios 5---contacting printer msg

    after installing iOS 5 on my ipad I am unable to print.  My printer is recogonized, but when I try to print I get a msg "contacting printer" but the doc never prints.

    Red411-
    iCloud should not matter.  But who knows what bugs are yet to be worked out!
    I suggest you unplug your WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    If that does not help, try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • Air Print Not Working

    I have a Photosmart c410a printer setup with a wireless connection to my home network. E-Print works fine. When I try to print from my Ipad 2, IOS 5.01, the printer is recognized by the Ipad. Click to print and then nothing. Does anyone have any suggestions for me? The c410a does support AirPrint.
    This question was solved.
    View Solution.

    Hi gregfrombelmont,
    I'll be happy to help you with this.  The first thing you may want to try is unplugging your router, then the printer (without turning it off first), then turn off your iPad.  After about 60 seconds, plug in the router and when all the lights are steady, plug in your printer and turn on the iPad.  
    Try printing again and let me know if this helps.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I have air printer that works on iPhones but not iPad 2

    I have air printer that works with both iPhones but not with iPad2

    Just to build on red_menace's answer a bit...
    set MyText to do shell script "ps -A | grep '[M]ac VNC 2.1.app' | awk '{print $5}'"
    log "MyText=" & MyText
    set content of text field "Dir" of front window to MyText
    The log command will write the results of the "do shell script" to Xcode's run log window. If you see the correct output there then you know that part is working correctly and the problem is in the way you're trying to insert the string into the text field. Maybe "Dir" doesn't match the name you've given your text field in IB? Or maybe your text field is contained within another view, such as an NSBox or an NSTabView?
    Also, I guess "of front window" should work in AppleScript Studio but I always give my windows AppleScript names in IB and then explicitly specify the window in my scripts. Like this:
    set content of text field "Dir" of window "MyWindow" to MyText
    Steve

  • Hi , i bought this phone from Dallas , TX  on 22 jun 2012 , right now I am in india . My phone Accidentally fall in water tub. And now is not working . For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me

    hi , i bought this phone from Dallas , TX  on 22 jun 2012 , right now I am in india .
    My phone Accidentally fall in water tub. And now is not working .
    For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they  are not ready to replace my phone .
    I also tried contacting local apple employee  named " RATI KALE " , but didn’t got any positive response.
    I provided them apple invoice, passport, visa details, my air ticket details. but still  they are not ready to help me . My phone details are as below :
    Serial No:C8*******T9Y , IMEI : 01*************995
      Please help me in replacing my phone.
    <Personal Information Edited by Host>

    Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.

  • The volume not working on my iphone 4s

    The volume not working on my iphone 4s

    I had the same problem as well for nearly 3 months.
    I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
    This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
    I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
    http://support.apple.com/kb/TS1630
    The solution for me is listed as line 7, which reads:
         "Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
    Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
    Hope this helps you as well!

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • My vibrate does not work on my iphone 4

    My vibrate function does not work on my iPhone 4. Does anyone have any information on this or solution to the fault??
    Any feedback is much appreciated.

    http://www.apple.com/retail/
    make a reservation on top tool bar
    do a back up as if faulty Apple will exchange and your device will go

  • My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    Hello wilsontot_too,
    Thank you for the details of the issue you are experiencing on your iPhone.  It sounds like you are not noticing transparency on your iPhone.  It may be that you have "Increase Contrast" turned on in your iPhone settings.
    I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
    iPhone User Guide - Large, bold, and high-contrast text
    http://help.apple.com/iphone/7/#/iph73b89c6
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My voicemail does not work on my iphone 5, not receiving messages that leave me

    my voicemail does not work on my iphone 5, not receiving messages that leave me

    any person who will do the same, I communicate with at &amp; t and nothing to do (I left messages in my mailbox I did not receive, nor the iphone notify me

  • My iTunes password does not work on my iPhone...

    My iTunes password does not work on my iPhone, but it does on my MacBook. Why? This is really annoying. How can I solve my problem? I don't even know how to contact Apple.

    dennythepest wrote:
    My iTunes password does not work on my iPhone,...
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My proximity sensor does not work on my iPhone 4

    My proximity sensor does not work on my iPhone 4

    Well, it can be fixed, however it is in a very difficult spot, and it may cost me more to replace than what I can get out of it. I don't care to pay for a replacement since my warranty is up, because I already have an iPhone 5. I want to sell the iPhone4, and not for $75 either because you can't make a phone call unless its on speaker. I didn't know what other people had to say, so I just wanted some feedback on my options. I'm sorry that I am not an expert on the iPhone hardware componets, because I actually work for a living. I don't have time to sit here and play on forums. Thanks for all you're help.

  • ITunes match does not work on my iPhone 4S, but is working across all of my other Macs and iOS devices.  All other iCloud services are working fine on the 4S - any suggestions?

    iTunes match is not working on my iPhone 4S; it works awesome across all of my Macs and other iOS devices (iPad 2, iPod Touch 4g x 2, and my wife's iPhone 4).  Any suggestions?  Thanks!

    It is not possible to "toggle back and forth" at will. If you associate a device with an Apple ID and you have iTunes Match enabled you must wait 90 days before you can associate it with another Apple ID. See this Apple KB article for more information: http://support.apple.com/kb/HT4627

  • I downloaded today 09.19.2013 iOS 7 on my iphone 4 and iPad retina. Unfortunately on the camera app the switch from photo to video does not work neither on iphone nor on ipad. Is it a "youth" bug ?

    I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?

    Did you try swipe up and down to change?

Maybe you are looking for

  • How to take data from HTML Template into BSP Variable?

    hi all,             can we take the data from the input field of HTML Template and collect into BSP variable? i have the shown the HTML Template into BSP page by passing the url in <IFRAME> tag now i have to take the data form the into field of HTML

  • How to check if an incident happened during a time frame in C#?

    I am developing software that adds if a button is clicked 5 times, a variable is incremented by '1' IF A then B++ everything is good, but now I want the system to reset its counter if that 5 times did not happen within 10 seconds. I.e the speed of cl

  • How to increase font size of pdf attachment?

    hi Experts,                   i am facing a problem to increase the size of pdf attachment which is generated through spool no. The spool is generated with line size 120. if i increase the line size  then still no impact on size in the downloaded pdf

  • Can't import video into iMovie 09 (8.0.6) from older Sony MiniDV with Firewire 400.

    I have about 2 hrs of video from an oral history, done on my Sony DCR-HC85 MiniDV Handycam.  Now I'm trying to upload the video to iMovie '09 (Ver 8.0.6).  I could get the iMac system to recognize the videocam via USB, but that only allows uploads fr

  • E-Business Suite Tables List

    Hi, is there any formal list of tables for the e-Business Suite? Thanks