Air print problem

how to connect my iPad to HP printer through air print. do I have to download any software for that?

Take a look here:
http://support.apple.com/kb/ht4356

Similar Messages

  • Air printer problem connecting to iphone

    My iPhone is not connecting to the air printer. I can print from a laptop. The phone is connected to a home network. How do I get my phone to find the printer? thanks

    see if the printer is compatible http://support.apple.com/kb/ht4356
    set up and troubleshooting http://www.apple.com/support/iphone/assistant/airprint/

  • Air print problem in HP dnf1536

    I have problem with AirPrint printer DNf 1536 HP model. If I need to install any apps for AirPrint.

    look at the link to troublshoot
    ios airprint 101 http://support.apple.com/kb/ht4356

  • Air print probleme d'impression

    Bonjour,
    Je viens d'acheter une imprimante ESPON STYLUS SX445W pour utiliser avec mon IPAD 2
    Cependant, en utilisant AIRPINT : l'imprimante est excessivement lente :
    Exemple d'impression
    4 lignes de mails : plus ou moins 4 minutes....
    de plus , hormis le fait que cela soit extremement lent : lorsque j'imprime une NOTE... celle ci se retrouve imprimée en hors champs...
    Le texte est excentré par rapport à la page. Y a t'il moyen de parametrer le champs d'impression? ( soit sur l'ipad soir sur l'imprimante.)
    Le support d'Espson me dit d'utiliserI I PRINT ... mais cela ne marche semble t'il que pour l'impression des photos.
    quelqu'un peut il m'aider?
    J'ai un Ipad 2 OS 5,0,1
    Autre précision : lorsque j'imprime VIA mon IMAC ( snow leopard) je n'ai aucun souci : Impression de la meme note en moins de 3 secondes et parfaitement dans le champs.
    Merci
    MARC

    À priori cela viendrait d'un problème de localisation
    Les format américains différent de ceux européen et Apple n'a pas inclus l'impression au format A4 du coup il doit y avoir une conversion qui est faite par l'imprimante
    En changeant la loc réglages--> général--> international
    Changer le format régional en anglais états unis et l'impression sera plus rapide (mais pas ajusté exactement au format A4)
    @+

  • Cannot suddenly air print, but has not been a problem previously

    Have not had a problem air printing, but suddenly not able to.  Have checked printer settings and works fine from iPhone and laptop but will not work from ipad.  Any one any clues please.

    Reboot iPad and/or router.

  • I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

    I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

    Peter,
    deggie gave you that link so you'd know that airprint is a reduced-options print system, designed for mobile devices (not Macs), and you need to use the specific airprint driver on the Mac when adding the printer if you want Airprint, no-options printing. Otherwise, select the "non-airprint" driver when you add the printer.
    It may be helpful to Reset the Printing System to get OS X to find the right driver.
    Mac OS X: How to reset the printing system - Apple Support
    (And "not working" doesn't help us to help you - please give more detail next time)

  • Air printer delegates problem in Offline Mode

    Hello All,
    I am sending a print job to Air printer but when printer is offline then still delegates says print job had done sucessfully. And after 10 sec it shows a Alert that printer is in offline mode.
    My question is how to determine the Air printer is ON/OFF before sending any print Job to printer?
    Print JOb delegates not returning any error or msg for it.
    Thanks
    PD Maxter

    Hope, this afternoon when i reboot my Phone.. and crash ! lol
    This times got pictures of what i did exactly ! Sorry it's in French ;)      Step 1 : After a reboot, i open Spotify and obtain this, I had never seen this before last week ! Usual it connects me at phone's start.. (Android widget of Spotify didn't work too after reboot, i need to open the application directly)            Step 2 : i click on "Connection" and he asks me for the desactivation of the Offline Mode => this message appears twice. I need to quit Spotify and restart it to connect successfully.              Step 3 : when i look in my "Playlists", the "Dub.Inc" one is not synced whereas before the reboot it was ! And proof in step 4..              Step 4 : when i look in "Parameters" of applications, i see this.. So i do not understand lol :p My playlist is here, in Exceptionnal quality.          So as this bug was crazy, i tested on my ipod touch 4 with another version of Spotify. I synced it at the same moment as the Android. You see that after the reboot, playlist is always here ! It's not my account but other thing.. I've got a 64 GO memory card µSD maybe due to that ?! Card is here since one year and no problem detected on it.                             If someone can help, you'll welcome :)

  • HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

    I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • IOS 6.1 can no longer air print to HP 6700; it worked before with no problems; is this a bug with 6.1?

    We have 2 iPads (2nd and 4th generation).  Both have been air printing without trouble to our HP 6700, which is on Apple's list of supported printers.  Both iPads were updated to OS 6.1 last night.  Now when attempting to air print something, the HP 6700 does not appear on the printer options list of printers to select from.  Interestingly, the other supported printer, and HP 8500, does show on the list, but when attempting to air print to it, this results in an error message "An error occurred printing this document."  This error happens in multiple apps that support air printing.  Is this a bug in iOS 6.1?
    The printers are visible in AirPort, AND I can print from a computer (MB Air and a Dell Win7)  to the HP 6700 without problems, but no longer from the iPads.  What gives?  I have powered down the HP 6700 and back up.  I even restarted the AirPort Express.  The problem persists with printing from the iPads.

    Hi, everyone, I yesterday bought a HP 6700, after setting everything like supposed to be, I could scan to computer and by eWeb service but not Print directly from iMacs (10.7.5 and 10.8.5) or iPhone, after installing things as suggesting here and HP support site, I decides to called HP support, and they do something, first they force to eliminated all printers from Print & Scan pannel (system preferences) by right-click over printer list on that pannel, and then create the printer from the IP address instead of by default selecting it from list (bonjour), that make the iMacs start printing fine. But iPhone still not. Then HP support suggested that maybe my router didn't support bonjour or it was not activated, so I tried with my phone company with no luck, since they told me that they never hear about this and that my router didn't support it, even if I think they didn't know, period. So I decided to create a network over my regular network, using an Airport Express, I create a new network (connected the Airport through ethernet cable to the router), and then place the iMacs and iPhone over the new network, restarted printer and iPhone, and then finally the iPhone could print on the HP 6700.
    So I suggest you try first force the printer using the IP address, thaht solved the problem with iMacs, and then if you can, used another router cause maybe the one you use have "issues" with bonjour/airprint etc....
    Hope this help.

  • TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

    Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

    This happened to me when I was setting up the wireless router for a friend.  The issue is with the Westall modem.  You need to go in and setup the "bridge" option on the westell modem.  The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
    http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
    Good luck
    Solution:
    Method 1 - Hard Reset
    Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
    After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
    Method 2 – Bridged Mode
    Access the Westell interface using http://192.168.1.254 or http://launchmodem.
    Click on the Broadband DSL Line button. 
    Click on the Protocols button 
    Select the radio button to the left of Option 2 (Bridge)
    Click the save button. Once the modem has restarted it is in bridge mode. 
    ALL STEPS COMPLETE

  • I'm trying to print  an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape.  That is I change it in printer settings but no use.

    I'm trying to print an Ancestry document from an iPad 2 using air print.  The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format.  I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to set up email for air print

    need help to set up air print, i believe i can give email address to a friend so they can print on my printer.
    I can already print wirelessly from my laptop and ipad

    Hi,
    Follow the steps below to set up ePrint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02881579&cc=us&dlc=en&lc=en&product=5058336&tmp...
    For any further problem make sure to include your printer model.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4356 I have just updated my Epson printer to one which supports air print but consider it to be a waste of money as my printer has two paper trays and there is option to choose which try...just "print"  How can I print photos via AirPrint from photo  tr

    Hi,
    First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and  Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"??  Thanks

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • Ipad can no longer find my HP air printer although was perfectly fine before. Have tried turning both printer and ipad off and on - no joy. Printer says that it is connected to my wifi.

    Just returned from holiday and my ipad can no longer detect my air printer, although working fine prior to that.
    Have tried switching both off and on again - no luck.
    The printer says that it's connected to my wifi as does the ipad.
    Would appreciate any suggestions as I have found it very frustrating trying to get any help from the HP support sites.
    Thank you

    You're welcome. It's amazing how many problems can be sorted out simply by restarting ALL devices involved. That's my first troubleshooting step when I have issues like that - restart everything and try again.
    I'm glad that it worked for you.

  • My iMac has decided it will no longer find my hp air printer?

    MY iMac has decided that it no longer wants to find my HP air printer have tried to search for it manually but nothing is found, ipad and iPhone both connect with it straight away no problems printing from these devices just the iMac any help would be appreciated

    Restart your router as well as your Mac and printer.
    If that doesn't help, try wireless diagnostics.
    Instructions >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

Maybe you are looking for

  • Bitlocker: How to read drive identifier from manage-bde

    Hi there, I'm trying to unlock a hard drive in the command line using the 48 digit recovery password: manage-bde -unlock c: -rp 0123456789...47 I have several encrypted disks and therefore several printouts of recovery keys, so I am unsure which reco

  • How to migrate custom application from AK to MDS ?

    I have got a custom application in Apps 11.5.8 where the data is stored in the AK_REGIONS table, etc. and the custmo application is registered in FND_APPLICATION table correctly. When applying the OAF 5.7 patch, the data is not migrated to MDS. Answe

  • Messages are in Backlog without any status

    Hi All, Today morning when I came and observed that, in the Engine-Status page i saw some 3000 messages under column "Processing Backlog (without errors)". When I went into Messaging Overview Tab, I see these messages are in 'To Be Delivered' status.

  • East Asian Language

    I have a Satellite A105-S4084. My computer recently crashed, and I lost everything . I do not have my reboot disk with me, I am currently abroad and can't find someone that understands my computer needs. I need to type in Chinese characters. I have t

  • Migrate NSS volume data from OES2-SP1 to OES2-SP3 server fails

    Hello forums I have a senario where we want to use miggui to migrate all files/folder and trustees, to e new server using miggui. When we try to migrate from the existing "VOL" from the old OES2-SP1 server, we get an error on the miggui log running o