Air print won't print to hp enabled printer tried all solutions

Airpprint will not print to hp enabled printer. Tried all know solutions, connected to Internet, printer on, etc.

Have you tried:
1. Rebooting router
2. Turn printer off for 30 seconds and on again
3. Reset iPad

Similar Messages

  • IPad 2 won't connect to home wi-fi, tried all solutions posted in discussions

    I have an Arris TG852 wireless gateway provided by Comcast.  Any suggestions other than the ones posted in the various discussions on this topic? I do not want to pay AT&T $30 per month for 3G access.  I can connect to wi-fi at Starbucks, so it's obviously my home gateway that's the issue. I'm not technically savvy, so please offer solutions in non-technical language.

    Tell us what you tried and what happened when you did.
    The obvious thing to check, given the details you provided, is whether or not you turned on and configured the wifi in the gateway.

  • TS3274 Ipad calendar won't save dates. I've tried all resets as well as sync options and it will still not work. Any other suggestions?

    Ipad calendar won't save dates. I've tried all resets as well as sync options and it will still not work. Any other suggestions?

    What do you mean it won't save date?  What exactly are you pressing and what happens or doesn't happen?
    Try this:
    Open the Calendar App and Tap Calendar at the bottom of the screen. Make sure all calendars have checkmarks, then Tap Done.  Do your events show up now?

  • TS1440 Air won't boot (flashing folder question mark); tried all the steps

    I've read and tried all of the fixes in ts1440 and ts2570 and hit blocks in all cases. Anybody got any more ideas before I schlep my Air to an Apple store?
    MacBook Air, 10 months old, running Mountain Lion
    It restarts to a flashing folder with question mark.
    If I hold down the <option> key, it gives me the option of booting off the internet (takes forever) and then I can use the Disk Utility, etc. The DU Verify Disk says there is no problem with my drive. However, the Startup Disk tool doesn't list the computer hardrive (or anything else) to boot off of.
    In the utility I tried the option to reinstall Mountain Lion but it gives me an error message, saying I should call Applecare.
    I plug in my Time Machine backup USB disk drive but the utility has the Continue button grayed out for the option Restore from TM.
    I've tried rebooting with option-command-P-R to reset the PVRAM, and rebooting holding down the shift key (safe mode).
    I don't have physical copies of the OS, I think its all from the cloud/AppStore. I've got a couple other Macs around (mini, macbook) but I don't think I have a compatible cable (without buying a doggle). I always use wifi with the Air.
    Thanks for any suggestions.

    It restarts to a flashing folder with question mark.
    If I hold
    down the <option> key, it gives me the option of booting off the
    internet (takes forever) and then I can use the Disk Utility, etc.
    The
    DU Verify Disk says there is no problem with my drive.
    However, the
    Startup Disk tool doesn't list the computer hard drive (or anything else)
    to boot off of.
    Since you have TimeMachine you can opt to use Internet Recovery to erase/format the entire drive and restore from that.
    1 partition, option: GUID, format: OS X extended journaled in Disk Utility.
    If it doesn't work to restore, then take it into Apple as you have a one year warranty, Buy AppleCare.
    Also a solo TimeMachine drive isn't the best,
    Most commonly used backup methods

  • My I touch gets very hot when charging, and it won't turn on.  I've tried all the resets/fixes and it does not respond.  Any Ideas?

    I have tried charging my itouch on the computer, in a docking station, and it gets very hot.  It won't turn on, even after trying all the resets I've read on this site.  Any ideas what the problem is?  Is it fixable?

    Hey Halefarm, What happens if you connect directly with the charging source with your cable, no docking station? Since resetting did not help, try connecting directly with the cable to your power source and your iPod. Next  try a different cable, there could be a short in the one you are currently using. If still will not charge correctly, I'm leaning in the direction of a failing battery. Set up an appointment to have your iPod evaluated by Apple. Have your iPod evaluated for possible battery issues. Take the cable and dock and have them tested as well. If it is a failing battery, you choices are; replace the battery, either through Apple or third party shop. Replace it yourself, if you can. Or,  you look into getting a new iPod. I don't have the cost of a new battery for an iPod 3, but I'm sure it's under $100. Check with Apple for exact pricing. Good luck, Cheers.

  • Black ink cartridge does not print. tried all suggested cures nothing works!

    What value????????
    This question was solved.
    View Solution.

    Hi, which printer model do you have?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • My MBP won't sleep HD, and I have tried every solution already posted.

    This is a persistent problem that began over 1 year ago, so information about how this unit might have been configured when it began is no longer available, but I have scoured this and google in general, using all search terms I can think of and still I can not pin point a reason my HD will not sleep.  I have been advised that there is a "process" keeping my unit awake, but I don't understand how that is possible when it won't even sleep when it is on the startup screen. So here are some particulars.....maybe you have some new thoughts?
    I drive a MBP with a 2.4 Core Duo processor running OS 10.9.1, 5gb of mem, 750gb of storage with 500+ free.
    1) I made a clean install of system software and a clean upgrade to Mavericks (as a way to try to solve the problem which began when I was using Mtn Lion).  There is no third part software loaded onto the machine, yet.
    2) I have yet to launch iTunes, or iPhoto, or a Browser, no printer has been added.
    3) The result is the same regardless of user or preferences.  It does it in "safe mode".  The Terminal doesn't give any reason for aborting sleep using "pmset -g" command.  It just has a "10".  Bluetooth is turned off, notifications are turned off, sharing is turned off, airport is turned off...it's not even connected to the internet. The only software on the computer is the system. There are no peripherals.
    4) It won't sleep even on the start-up screen.  It won't sleep if I go through the menu or close the lid.  It will power off the monitor, and begin to wind down the HD, but just as it reaches the end of the sequence BING and the screen comes on again.  If the lid is closed, it will stay that way until the battery runs out, unless it's plugged in.  SMC and VMRAM resets not effective.
    5)  I have no files on this computer so I don't care about losing them.
    6) This computer did not have this problem using Snow Leopard, and even worked for a time using Mtn Lion and changing to Mavericks has not affected the problem which leads me to think it's not OS related.  It acts like a firmware issue, but as far as I can find there is no firmware upgrade for my unit.

    Hello Bobz,
    Thank you for responding.  You require that I modify #2, above.  I have now gone on internet, opened Safari.  I downloaded etrecheck, restarted, waited for computer to cycle through sleep cycle (1 min).  After failure, I ran etrecheck.  Here are the results:
    Hardware Information:
              MacBook Pro (15-inch Early 2008)
              MacBook Pro - model: MacBookPro4,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              5 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:29:13
    Disk Information:
              ST9750420AS disk0 : (750.16 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        inni (disk0s2) /: 749.3 GB (353.92 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple, Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
    Launch Agents:
    User Launch Agents:
    User Login Items:
              None
    Internet Plug-ins:
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              None
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   5%          WindowServer
                   2%          EtreCheck
                   0%          mds_stores
                   0%          mds
                   0%          imagent
    Top Processes by Memory:
              61 MB          Finder
              51 MB          mds_stores
              46 MB          WindowServer
              31 MB          mds
              31 MB          Dock
    Virtual Memory Information:
              3.75 GB          Free RAM
              617 MB          Active RAM
              130 MB          Inactive RAM
              530 MB          Wired RAM
              218 MB          Page-ins
              0 B          Page-outs

  • My iPod classic (160gb) won't connect to iTunes I've tried all the updates (using an 07 MacBook I believe) and it keeps saying it needs snow leapord

    I just bought it and it won't work! I did all the updates but it's saying I need snow leopard? Please help!!

    HI there,
    Snow Leopard is going to be a paid update that you will need to order form the Apple Online Store. Before upgrading, it is always a good idea to have a backup of your information. The article below has more information about backing up.
    Mac OS X v10.5, v10.6: How to back up and restore your files
    http://support.apple.com/kb/ht1553
    -Griff W

  • Firefox won't connect to the internet after trying all the troubleshooting, reinstalling, checking my firewall, etc. Help!

    OK, I've got Firefox re-installed but it still can't connect to the internet. The original issue disabled my Norton antivirus and I'm currently using Windows defender. I've removed Mozilla from the allow list as suggested in the troubleshooting and then re-added it, but that didn't help, Any suggestions? I'm running a full virus scan now, it's been 2.5 hours now and still running. I can't figure out what is stopping FF from accessing internet and so far none of the suggestions have worked. I'm running windows 8. I'm trying to install the troubleshooting info but it keeps asking me what to open the xpi file with and I have no idea. dammit this is so annoying. Ok, got the troubleshooting info added manually. Hope that helps someone help me.

    Thanks, that didn't work either. I finally got it figured out with some help from a co worker. My norton antivirus was blocking the upgrade,even though the upgrade had disabled it. Weird, but once we updated and downloaded the new norton things worked fine. Thanks everyone for the suggestions.

  • Why won't Flash load? I have tried all suggestions and I still get an error message.

    I have tried every troubleshooting option to load Flash and I still get an error message everytime. What options remain.

    Welcome to the Adobe Forums.
    The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information where applicable:
        •    Adobe product and version number
        •    Operating system and version number
        •    Browser and version number (where applicable)
        •    The full text of any error message(s)
        •    What you were doing when the problem occurred
        •    Screenshots of the problem (if possible)
        •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I CAN'T GET MY MACBOOK AIR, IPHONE OR IPAD CONNECT TO EACH OTHER THROUGH BLUETOOTH. I HAVE TRIED ALL THE SUGGESTIONS I HAVE READ, INCLUDING RESTARTING DEVICES, FORGETTING DEVICES, TURNING BLUETOOTH ON AND OFF.

    I am unable to connect my Macbook air, iPhone or iPad though bluetooth. I have tried all the suggestions I have read. i.e. toggle bluetooth on and off, turn devices on and off, forget devices and then pair. I seem to be able to pair but the devices immediately go to not connected and a message appears that reads: make sure devices are turned on and in range.

    Pairing the phone with the car is one thing, but paring to the computer is not generally supported. Tethering is using the cellular data access from the phone for the other devices. It is part of Personal Hotspot. If you aren't aware of what it is, then it probably is something you do not use.
    As far as the car is concerned, what is not working? Does the car not see the phone, or the phone see the car, or after you start to pair something fails? If you provide more information about the problem and what you have tried to do to correct it, then we can offer some solutions. What version of the iPhone, what iOS, and what year and make of vehicle?

  • HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310.  Can't print from iPad iOS6.  They're on the same network, but have different IP addresses.  On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133.  Can I match them? H

    I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310).  They're on the same network, but have differed IP addresses!  The iPad IP is 192-168-1.126 and the printer is 192-168.1.133.  That's the only difference I can see.  Is there a way to fix this?

    fyi:
    you put periods between the numbers.
    Each device needs a unique number.
    for the 192.168.1 the right must number should vary.  192.168.1.x
    the numbers you have look ok.
    Power off all devices: wifi router, printer, ipad.. wait 10 minutes.  poweron router ... wait power on printer wait then power on ipad.
    cross fingers.
    Robert

  • HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

    I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • IPad won't recognise Mg8250 as an air printer

    When I try to print wirelessly from iPad it comes back with the message "no air printer found" Is there something I need to do with the printer to make this happen.
    I should probably first give a bit of background to my situation which may or may not be helpful, As well as the iPad i have a Windows 7 PC, which is wired both to the router and the printer, and a windows 8.1 laptop which has a wireless link to the same router.Wireless printing from the laptop is not a problem and works absolutely fine. Initially I thought this printer link was via the Homegroup which i had set up but, never really used apart from printing. But, following the re-install of Windows on the PC, I could not get Homegroup set up so currently neither laptop nor PC is a member of a homegroup but wireless printing from the laptop still works. So i have to conlude that the set-up is not (and probably never was) linked to Homegroups
    The ipad is on the same wireless network as the laptop and the wired PC
    Any ideas? 
    Solved!
    Go to Solution.

    Do you have this firmware update?
    http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctionals/InkJet/PIXMA_MG...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • C4385 air print compatible​?

    I have a c4385 printer connected directly into my network and not using the wireless feature.  Any drivers or updates available to enable air print from my i-pad?  The printer works fine and I hate to buy another just to print from the i-pad. 

    Why anyone would pay 10$ for a 3rd party solution, let alone be stupid enough to buy a new HP printer for AirPrint to work, defies common sense.
    Follow the instructions here:
    http://blog.steventroughtonsmith.com/2010/11/return-airprint-sharing-to-mac-os-x .html
    and in less than two minutes, including reboot, you can re-enable that functionality that was disabled during beta testing of iOS 4.2, with every printer.
    I did it for all my 'puters and printers, and it's just so silly, because it works. FYI I have a Samsung laser printer, and a lame HP color jet thingy.
    They (Apple and printer businesses) don't want you to use this, or even know about this, because printer businesses probably threatened to sue Apple for software patent infringement (i.e., those stupid printer drivers, a technology that should have vanished aeons ago).
    But it is not illegal to tweak it yourself, nor is it going to damage your OS X. Heck, if anyone's paranoid about that, jsut backup the old files... all three of them, adding to about 10-15 seconds to the suggested workflow above...
    If someone's not tech savvy, do be aware that accessing /usr/share and /usr/libexec is easier from Finder, but smoother from Terminal, as it may be the case that the permissions associated with those hidden system folders exclude the user attempting to copy and paste files to them. If this happens, login as an admin, and if OS X still won't have you overwrite the files, right-click on the folder from Finder, select "Get Info", then at the bottom of the info window, click on the little lock icon under Sharing and Permissions, and add yourself to the list as a user with read & write privileges...
    Reboot, re-add your printer through System Preferences as per instructions on the website, and enjoy AirPrint right away from your iPad, iPhone, or iPod Touch...
    Peace out
    Herr Doktor Sly

Maybe you are looking for

  • Changing value for open_cursors

    Dear All, I have changed the value for this parameter in a customized init.ora file which I give during the startup of the Database like this : startup open pfile=/software/initkbdev.ora I want to change the value for this permanently in the database

  • How to Canonicalize an Big XML?

    Hello, i want to Canonicalize a big XML (like 1GB or more), the program it's in DOM, but dom can't manage big XML documents, so i was thinking to do it with STAX. How i can do it? The Code (with dom) that i have it's: File file=new File("big-1gb.xml"

  • Material Groupwise authorization for purchase requisation creation

    Gurus My client want to give authorization for creating purchase requisation - material groupwise. i.es for material group 1,2,3,4,5,purchase group 100 has the authority to create the PRs and for material group 6,7 & 9 it should be with purchase grou

  • Installing Contribute CS3 on Win 7/64 home edition

    On going through the long slow process of installing software on Win7 I ran into a snag with Contribute CS3.  I have the downloaded version burnt to a CD which I have never had a problem installing from on XP. With Win7, after agreeing to the terms o

  • Using nqcmd command to purge cache

    Hi, I'd like to ask a question, in OBIEE11G, I need to use nqcmd command to purge cache, in server I run below commond: nqcmd -d coreapplication_OH1568635987 -u weblogic -p weblogic1 -s C:\purgecache.txt in purgecache.txt is following command: call s