Air printer
My printer will not air print. I can still scan and print. I did change inks a week ago but it works perfectly for direct print. I have tried it near or far. Help please!
Hi,
Your printer is not airprint enabled. The airprint function is built into the apple devices but will not work with your printer.
You could try downloading the HP eprint app to see if that might work.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Similar Messages
-
Please help me to be able to print from my Canon MG3250 Air printer from my I pad.
Your printer is AirPrint capable - make sure your iPad and the printer are on the same WiFi network.
Here's a guide that includes troubleshooting tips:
AirPrint Basics -
Can't find printer in air print
Cannot find my Samsung printer on my iPhone 5. On same wifi network; prints wirelessly from PC; printer model is air print enabled; only way to print from iPhone is using clunky Samsung print app. Am I missing something here?
try resetting your printer and the iPhone and if that fails, see this:
Additional Information
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
Avoid connecting AirPrint-capable printers to the USB port of Apple AirPort Base Stations or Time Capsules. Doing so can enable traditional AirPort printing from a Mac, but it will not enable AirPrint functions for iOS devices. If you cannot use Wi-Fi networking to connect the AirPrint-capable printer, use an Ethernet connection from the AirPrint-capable printer to the Apple AirPort Base Station or Time Capsule.
Wi-Fi printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the printer is connected to the Wi-Fi network before attempting to print. -
My ipad does not find my air printer all the time.
Why is it that my mini ipad intermittently find my air printer ?
1. Turn the router, iPad and printer off.
2. Turn on the router and then wait 30 seconds to let it complete its start-up process.
3. Turn on printer and then wait 30 seconds to let it complete its start-up process.
4. Turn on your iPad and test print. -
I'm trying to print an Ancestry document from an iPad 2 using air print. The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format. I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?
Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit
I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit
Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq -
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
jerryone1942 wrote:
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
It depends upon the capabilities of your printer. If you have an HP printer with a photo tray then the Photo app will print to whatever size you load in to that tray.
There's some more information here:
Using AirPrint to Print Various Photo Sizes
With other printers the user is given a choice from the printer's loaded paper sizes. You can see an example of that here:
The Many Faces of the iOS Print Panel -
I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?
fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert -
When I air print using FingerPrint from my ipad, it doesn't let me limit the number of pages, and I end up with more pages than I want. It asks if I want multiple copies, but it doesn't ask me number of pages, or which pages. Is there a way to do this?
When you use an AirPrint compatible printer, you get this option for page range. You are using your computer as the server in order to print, so you probably have to set the range on the computer. While you can print from your printer with this app, I assume that it doesn't give you the same control that you get directly from the iPad when using an AirPrint printer.
Read this from the FingerPrint support site. Selecting the page range would be part of the formatting of a print job.
http://fingerprint-support.collobos.com/knowledgebase/articles/66972-i-can-t-for mat-the-print-job -
I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi setup again on the printer. I am not sure whether os is ..1 or.2 or just 6.0
bump... Anyone have any answers?
-
How to set up email for air print
need help to set up air print, i believe i can give email address to a friend so they can print on my printer.
I can already print wirelessly from my laptop and ipadHi,
Follow the steps below to set up ePrint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02881579&cc=us&dlc=en&lc=en&product=5058336&tmp...
For any further problem make sure to include your printer model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hi,
First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"?? ThanksI just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
How can I print without an air-printer
I do not have an Air-Printer, just an Epson Stylus Photo PX720WD. I have installed Epson IPrint, and am currently using Evernote, Numbers and Pages. Can any one tell me how I can print from any of these apps, or print E-Mails and web pages, without transferring such documents to my PC (Windows XP)
Woodmouse22-
As Dwb suggested, it is possible to share your computer's printer as AirPrint over WiFi.
For the iPad printing Apps such as Epson iPrint or EuroSmartz Print n Share, you may be able to print from some other iPad Apps that have the "Open In" option. Otherwise you will need to use the printing App's internal programs to print. For example, Print n Share has its own mail, text, photo and browser programs.
Fred -
HT4356 Pages printed from Notes to air printer have very large font and no margins
How can i reduce the size of the print when printing from Ipad "Notes" to an air printer. I can only find a way to increase the font but not decrease it. Also how can I adjust the margins
Same here. Best to put the notes/copy them into something like the Pages app (for a small cost) or email them from the Notes app to a proper computer with good word processing programmes.
-
All of a sudden i can no longer air print from my iphone 4S or my ipad 2
Need help
I can still air print from my Dell laptopHello rcappel,
Thank you for the details of the issue you are experiencing when printing from your iPhone and iPad. I found a couple of resources I recommend for the issue you described.
First, I recommend following these steps:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are still having trouble printing after following those steps, I recommend these steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Just returned from holiday and my ipad can no longer detect my air printer, although working fine prior to that.
Have tried switching both off and on again - no luck.
The printer says that it's connected to my wifi as does the ipad.
Would appreciate any suggestions as I have found it very frustrating trying to get any help from the HP support sites.
Thank youYou're welcome. It's amazing how many problems can be sorted out simply by restarting ALL devices involved. That's my first troubleshooting step when I have issues like that - restart everything and try again.
I'm glad that it worked for you.
Maybe you are looking for
-
Unhandled Exception in BO 6.5.2 report(.rep) while save as Excel
Post Author: birinder CA Forum: Desktop Intelligence Reporting Hi everyone, I have a report created in BO 6.5.1 and i can save the report as excel file. Now I have installed SP2 and while I try to save the same report in excel, its throwing 'Unhandle
-
Preview and output in Encore cs5 quality, not close to preview in Premiere Pro CS5
I am working on a project and in Premiere Pro the preview looks fantastic. Sequence that I am dealing with is AVCHD 1080i. When I send the sequence to Encore via Dynamic Link, the preview is fuzzy, not sharp and out of focus. Not only is the p
-
Odd "Blank" or "black" screen in apps
I play galaxy online 2. go2.igg.com Because I don't like crashes, I like to play on Firefox 3.6.6 with Flash 10.1. At any rate, I did some install and reinstall work for Flash to figure out which version worked best. So I did multiple installs / un
-
Merging two documents in pages
I have made several cover pages and the one i finall like i would like to add to another document. The cover page has images. I cant' do the copy and paste it won't carry the images...does anyone know how to merge documents in pages?
-
SSISDB.Catalog.executions
Hello Everyone, When I try to run SSISDB.Catalog.Executions from the Management Studio, it runs with no problems. My SSIS package executes. However, when I try to run it from a stored procedure being Activated from Service Broker, nothing happens.