Air QR code generator/reader

Anyone have any current recommendations for Air QR code generator and reader (ANE, lib)?
I need a solution that will:
1) Generate a text/string QR code in Air desktop
2) Generate a text/string QR code in Air cross-platform mobile app (android or iOS). Same code base as #1.
3) Scan the QR code on cross-platform mobile device (android, iOS) from within my Air app.
I see a lot of search results for various ways, but so far nothing cross-platform.
Thanks!
Don

Hi Sbhave.
Thanks for your response.
I still need to read the post but it certainly looks interesting.
I think it explains how I can make a QR Code having contact details.
I got your AS3 Qr Code reader to work and it reads a QR Code BEAUTIFULLY, even a VCard. Now your code simply reads the QR Code and outputs the read to a window. Your code doesnt tell the mobile device what to do with the output. Now it is easy enough to add some code which, if the data is a web address, will go to that webaddress. However if I have used your QR Reader (in AS3) to read a vcard how do I code the Reader so that it knows that it must add the contact info to my mobile devices contacts list and can actually do this ? I have some commercial QR Code readers which use the Zing Library and recognise that its a Vcard and give the choice to save to the contacts list.
Thanks
Paul

Similar Messages

Code generate report in excel format from portal(Application Server)

Hi all
Please give some solution with code generate report in excel format from
oracle portal(Application Server).

Not feasible.
Why? Because "the Excel format" is a binary and proprietary Microsoft file format. And writing a generator to generate Excel files will be complex, and resource expensive. In the vast majority of cases this will not be justified.
As an alternative the very basic Microsoft XML office format can be used. But note that this is not a a ISO standard (it has been shot down in flames) - and effort and resources for that would be better spend on the Open Document XML standard (which very likely will be ratified as the ISO standard instead).
Of course, you could have meant a CSV file - in which case, you need to play close attention to details. CSV is not an Excel format. A software designers and developers, our success is determined by attention to technical detail. In which case you are not paying any attention to technical detail by confusing CSV with Excel.

Help!!! T61 Blue Screen--unmountable boot volume-- error code 0000: Read verification failed

My computer is T61 (8891CT), but Blue Screen came out and reported--unmountable boot volume. I ran the diagnostic program and got the error code 0000: Read verification failed. I can’t run anything now including the restore and rescue. Has the hard drive died?
If the hard drive has died, I have to change the hard drive, but how to transfer the system (I don’t have any CD) and think vantage software? Thank you very much for you help.

Hi equalefk,
Yes, definitely sounds like it's time to replace the HDD.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How do I make this code generate a new pro when the "NEXT" button is pushed

How do I make this code generate a new set of problem when the "NEXT" Button is pushed
* To change this template, choose Tools | Templates
* and open the template in the editor.
/* Figure out how to create a new set of problms
* Type a list of specifications, include a list of test cases
* DONE :]
package javaapplication1;
import java.awt.GridLayout;
import java.awt.Window;
import javax.swing.*;
import java.awt.event.*;
* @author Baba Akinlolu -
class Grid extends JFrame{
    int done = 0;
    final int score = 0;
    final int total = 0;
        //Create Panels
        JPanel p2 = new JPanel();
        JPanel p3 = new JPanel();
        final JPanel p1 = new JPanel();
        //Create Radio buttons & group them
        ButtonGroup group = new ButtonGroup();
        final JRadioButton ADD = new JRadioButton("Addition");
        final JRadioButton SUB = new JRadioButton("Subtraction");
        final JRadioButton MUL = new JRadioButton("Multiplication");
        final JRadioButton DIV = new JRadioButton("Division");
        //Create buttons
        JButton NEXT = new JButton("NEXT");
        JButton END = new JButton("End");
        //Create Labels
        JLabel l1 = new JLabel("First num");
        JLabel l2 = new JLabel("Second num");
        JLabel l3 = new JLabel("Answer:");
        JLabel l4 = new JLabel("Score:");
        final JLabel l5 = new JLabel("");
        JLabel l6 = new JLabel("/");
        final JLabel l7 = new JLabel("");
        //Create Textfields
        final JTextField number = new JTextField(Generator1());
        final JTextField number2 = new JTextField(Generator1());
        final JTextField answer = new JTextField(5);
    Grid(){
        setLayout(new GridLayout(4, 4, 2 , 2));
        p2.add(ADD);
        p2.add(SUB);
        group.add(ADD);
        group.add(SUB);
        group.add(MUL);
        group.add(DIV);
        p2.add(ADD);
        p2.add(SUB);
        p2.add(DIV);
        p2.add(MUL);
        //Add to panels
        p1.add(l1);
        p1.add(number);
        p1.add(l2);
        p1.add(number2);
        p1.add(l3);
        p1.add(answer);
        p1.add(l4);
        p1.add(l5);
        p1.add(l6);
        p1.add(l7);
        p3.add(NEXT);
        p3.add(END);
        //Add panels
        add(p2);
        add(p1);
        add(p3);
        //Create Listners
        Listeners();
void Listeners(){
      NEXT.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent e) {
         int answer1 = 0;
         //Grab the numbers entered
         int numm1 = Integer.parseInt(number.getText());
         int numm2 = Integer.parseInt(number2.getText());
         int nummsanswer = Integer.parseInt(answer.getText());
         //Set the score and total into new variabls
         int nummscore = score;
         int nummtotal = total;
         //Check if the add radio button is selected if so add
         if (ADD.isSelected() == true){
             answer1 = numm1 + numm2;
         //otherwise check if the subtract button is selected if so subtract
         else if (SUB.isSelected() == true){
             answer1 = numm1 - numm2;
         //check if the multiplication button is selected if so multiply
         else if (MUL.isSelected() == true){
             answer1 = numm1 * numm2;
         //check if the division button is selected if so divide
         else if (DIV.isSelected() == true){
             answer1 = numm1 / numm2;
         //If the answer user entered is the same with th true answer
         if (nummsanswer == answer1){
             //add to the total and score
             nummtotal += 1;
             nummscore += 1;
             //Convert the input back to String
             String newscore = String.valueOf(nummscore);
             String newtotal = String.valueOf(nummtotal);
             //Set the text
             l5.setText(newscore);
             l7.setText(newtotal);
         //Otherwise just increase the total counter
         else {
             nummtotal += 1;
             String newtotal = String.valueOf(nummtotal);
             l7.setText(newtotal);
//Create End listener
END.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent e) {
        // get the root window and call dispose on it
        Window win = SwingUtilities.getWindowAncestor(p1);
        win.dispose();
//new Grid();
String Generator1(){
     int randomnum;
     randomnum = (1 + (int)(Math.random() * 100));
     String randomnumm = String.valueOf(randomnum);
     return randomnumm;
public class Main {
     * @param args the command line arguments
    public static void main(String[] args) {
        // TODO code application logic here
        JFrame frame = new Grid();
        frame.setTitle("Flashcard Testing");
        frame.setSize(500, 200);
        frame.setLocationRelativeTo(null);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setVisible(true);
}Edited by: SirSaula on Dec 7, 2009 10:17 AM

Not only are you continuing to post in the wrong forum but now you are multiposting: [http://forums.sun.com/thread.jspa?threadID=5418935]
If people haven't answered you other posting its probably because we don't understand the question. Quit cluttering the forum by asking the same question over and over and then next time you have a new question post it in the proper forum. Your first posting was moved becuase you didn't post it properly.

Fpga HDL code generator

    Hello,
It seems that FPGA module cannot interface custom FPGA board.
I wonder if FPGA can be used as a HDL code generator.
Here is what I'd like to do :
- code an algorithm in a LabVIEW block diagram
- make a HDL from the BG with FPGA module
- build the HDL code in my FPGA IDE (Quartus II, in this case)
- download it in my FPGA target with the JTAG probe
- use RS232 (or any VISA interface) to communicate the results to another LabVIEW vi
The main question is : can LabVIEW FPGA module generate HDL code ?
Thanks,

Hello,
The LabVIEW FPGA module generates *.vhd files, located in the directory C:\NIFPGA80\clntTmp\[projectDir]\ (if you use LabVIEW 8.0); those files are then sent to Xilinx tools to generate the FPGA bitfile. LabVIEW FPGA module is not designed for non-NI products, this is why those intermediate files are encrypted.
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

Wo Finde ich den Erweiterter QR-Code-Generator in InDesign 2014, um bei der Datenzusammenführung automatisch einen QR-Code zu erzeugen?

Hallo,
ich muss hunderte Visitenkarten erstellen auf denen ein personalisierter QR-Code oben sein soll. Laut Adobe Neuerungen in der CC 2014 InDesign, soll es nun
einen 'Erweiterter QR-Code-Generator' geben mit dem QR Codes automatisch erstellt werden können. Nur wo finde ich den? Help!
Danke!

Hallo zusammen!
Ich glaube hier ist die Lösung.
Auto Generate QR Codes with Data Merge in InDesign CC 2014
Hatte nämlich auch das Problem und wusste nicht wie die Spalte für den QR-Code benannt werden musste.
Die Spalte muss so benannt werden "#QRcodes" damit sie erkannt wird.
Habe das ganze aber noch nicht ausprobiert.
Ich hoffe ich konnte euch helfen.

How do I edit the file created by code generator?

hi all,
I want to modify a java file that is generated when you create the webdynpro, but I can not change.
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
how can I disable the file to modify
thanks!

Hi Pablo.
There's no way to modify it, NW2004s and its IDE has a code compilation based in some internal scripts based on eclipse plugin architecture.
In your code you must consider this.
1 - Try to find in your declared methods, importing directives, packages declarations some like this:
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.sap.teste;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateTesteApp).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import com.sap.teste.wdp.IPrivateTesteApp;
import com.sap.myimport.MyClass;
//@@end
//@@begin
//@@end
it means that between begin and end...you can add what you want..and the code will not be removed after class compilation....
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
//@@begin wdDoExit()
//@@end
int this case too....if you implement something between //@@begin and //@@end in the method scope...all part of your code will be surely safe.

Air Play Code

I'm now being asked for my AirPlay code (in trying to view my Mac on my Apple TV). This is a first. How do I set up or figure out my Air Play code?

Hello druefromsugarhill,
After reviewing your post, it sounds like you need some information about the onscreen code. I would recommend that you read this article, it may be able to help the issue.
Apple TV (2nd and 3rd generation): Understanding AirPlay settings - Apple Support
Set an onscreen code
Go to Settings > AirPlay > Security > Onscreen Code > On.
Use this setting to require a specific code to AirPlay to your Apple TV. When Onscreen Code is on and an AirPlay-enabled devices tries to connect to your Apple TV, you must enter the passcode shown on the TV into the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Automatic html code generated in {module_case} output

Does anyone know a work around for the automatic spacing and carriage return that BC system generates when the {module_case} is displayed? I have BC form that is transferring this data from BC to a third party site and the extra code being generated :
%0D = Carriage Return
%0A=line feed
Is killing the callback method of the form
Screenshot of how form looks on screen
http://screencast.com/t/aSw3pywL
Screenshot of backend with extra return
http://screencast.com/t/4xfESLGpu
Screenshot of extra code generated
http://screencast.com/t/NmlCxbGgiEC

In struts my string pritns like this
var abc = new Array(["A", "B"]);
I pass this string to JSP. and in the outputted html,
all double quotes are replaces by its equivalent ASCII "
:(

What is wrong with the idl code generated by packager.exe?

Hello everybody,
I am trying to figure out what is wrong with the idl code generated by packager.exe. In the evaluation for the bug posted at http://developer.java.sun.com/developer/bugParade/bugs/4964563.html it says that the IDispatch interface is not exposed correctly and thus early binding of java objects is not possible using the current activex bridge implementation.
As I am no idl expert I have no idea what that means. However, I managed to dig out the idl code generated by packager.exe for the following example bean:
package test;
public class MyBean
     protected int value;
     public MyBean()
     public void setMyValue(int _value)
          value = _value;
     public int getMyValue()
          return value;
     public MyBean getSelfReference()
          return this;
}The corresponding idl code generated by packager.exe is
uuid(81B0BF63-2A55-11D8-A73E-000475EBF021),
version(1.0)
library MyBean
importlib("Stdole2.tlb");
dispinterface MyBeanSource;
dispinterface MyBeanDispatch;
uuid(81B0BF64-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanSource {
properties:
methods:
uuid(81B0BF65-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanDispatch {
properties:
[id(4097)]
int myValue;
methods:
[id(32768)]
VARIANT_BOOL equals(IDispatch* arg0);
[id(32769)]
IDispatch* getClass();
[id(32770)]
int getMyValue();
[id(32771)]
IDispatch* getSelfReference();
[id(32772)]
int hashCode();
[id(32773)]
void notify();
[id(32774)]
void notifyAll();
[id(32775)]
void setMyValue(int arg0);
[id(32776)]
BSTR toString();
[id(32779)]
VARIANT wait([optional] VARIANT var0, [optional] VARIANT var1);
uuid(81B0BF62-2A55-11D8-A73E-000475EBF021),
version(1.0)
coclass MyBean {
[default, source] dispinterface MyBeanSource;
[default] dispinterface MyBeanDispatch;
};Does anyone know what is wrong with this code and maybe how to fix the idl code? Generating the dll should then be easy (I already tried several variations of the idl code but as my idl knowledge is limited it didn't really do what I wanted).

Then the question is why it does work with visual controls (even if you set them to non-visible)?

The code generated by EJBC in Weblogic 5.1 is wrong!

I have a container managed bean that has a primary key named
productLicenseId as follows:
public class ProductLicenseBean implements EntityBean
public int productLicenseId;
I had this code running in Weblogic 4.5.1 and converted it to EJB 1.1
(now I use java.lang.Integer for the primary key class) and attempted to
build it using WebLogic 5.1. I built your container managed example
(AccountBean), which built fine (it is clear why your example did not
have the problem mine did- the primary key is java.lang.String). After
that, I tried to build my container managed bean, but without success.
Here is a description of my problem:
After trying to compile my simple container-managed program using EJBC
in Weblogic 5.1, I get the following error:
ProductLicenseBeanEOImpl.java:56: Incompatible type for =. Can't convert
int to java.lang.Integer
pk = bean.productLicenseId;
ProductLicenseBeanEOImpl.java is a class that was generated by EJBC. It
is clear that this code is incorrect! The generated code (pk =
bean.productLicenseId) attempts to assign the primary key in the
ProductLicenseBean (an int) to a java.lang.Integer (pk is of type
java.lang.Integer), which is wrong! The source code generated by EJBC is
wrong!
Do you have a bug fix for this, or is there something I'm just not
getting?? !!
I should be able to use a java.lang.Integer as a primary key.
Thanks much for your help.
Tim Kimmet, [email protected]
[timk.vcf]

I had the same problem. I had used the deployer tool and had specified a
primary key class AND a primary key field "ID".
This had put an extra tag in the ejb-jar.xml file <persistence field> which
I hadn't seen before.
Changing the primary key field to "none" fixed caused other problems to show
up in the deployer tool (finders). I had to redo the
deployer project from scratch, this time keeping the primary key field to
"none" and it worked.
Tim Kimmet <[email protected]> wrote in message
news:[email protected]..
I have a container managed bean that has a primary key named
productLicenseId as follows:
public class ProductLicenseBean implements EntityBean
public int productLicenseId;
I had this code running in Weblogic 4.5.1 and converted it to EJB 1.1
(now I use java.lang.Integer for the primary key class) and attempted to
build it using WebLogic 5.1. I built your container managed example
(AccountBean), which built fine (it is clear why your example did not
have the problem mine did- the primary key is java.lang.String). After
that, I tried to build my container managed bean, but without success.
Here is a description of my problem:
After trying to compile my simple container-managed program using EJBC
in Weblogic 5.1, I get the following error:
ProductLicenseBeanEOImpl.java:56: Incompatible type for =. Can't convert
int to java.lang.Integer
pk = bean.productLicenseId;
ProductLicenseBeanEOImpl.java is a class that was generated by EJBC. It
is clear that this code is incorrect! The generated code (pk =
bean.productLicenseId) attempts to assign the primary key in the
ProductLicenseBean (an int) to a java.lang.Integer (pk is of type
java.lang.Integer), which is wrong! The source code generated by EJBC is
wrong!
Do you have a bug fix for this, or is there something I'm just not
getting?? !!
I should be able to use a java.lang.Integer as a primary key.
Thanks much for your help.
Tim Kimmet, [email protected]

Problem with .c code generated from proc compiler.

I am having a problem compiling the c code generated from the proc pre-compiler.
First some info on my system.
[root@dell-xps-420-22 ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Client release 5.4 (Tikanga)
[root@dell-xps-420-22 ~]# cat /proc/version
Linux version 2.6.18-164.11.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 6 13:26:04 EST 2010
[root@dell-xps-420-22 ~]# uname -a
Linux dell-xps-420-22.drew.com 2.6.18-164.11.1.el5 #1 SMP Wed Jan 6 13:26:04 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
I have written a simple PRO*C program to test the compile.
[oracle@dell-xps-420-22 etl]$ cat Test.pc
#include <stdio.h>
main(int argc,char **argv)
printf("Testing ........\n");
[oracle@dell-xps-420-22 admin]$ cat pcscfg.cfg
sys_include=(/usr/include,/usr/include/linux,/build/s630/precomp/public,/usr/lib/gcc/x86_64-redhat-linux/4.1.1/include)
include=$(ORACLE_HOME)/precomp/public
include=$(ORACLE_HOME)/precomp/hdrs
include=$(ORACLE_HOME)/precomp/include
CODE=cpp
TYPE_CODE=ORACLE
DEF_SQLCODE=YES
VARCHAR=YES
LTYPE=short
define=__x86_64__
When compiling the Test.pc program with the pcscfg.cfg file above.
[oracle@dell-xps-420-22 etl]$ proc Test.pc
Pro*C/C++: Release 10.2.0.1.0 - Production on Sun Feb 21 19:51:15 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /u01/app/oracle/product/10.2.0/db_1/precomp/admin/pcscfg.cfg
[oracle@dell-xps-420-22 etl]$ gcc -c ./Test.c -I . -I$ORACLE_HOME/precomp/public
./Test.c:117: error: expected identifier or '(' before string constant
./Test.c:131: error: expected identifier or '(' before string constant
The code generated by the proc compiler that has problems is below.
//File Test.c
// Prototypes
Line 117: extern "C" {
void sqlcxt (void **, unsigned int *,
struct sqlexd *, const struct sqlcxp *);
void sqlcx2t(void **, unsigned int *,
struct sqlexd *, const struct sqlcxp *);
void sqlbuft(void **, char *);
void sqlgs2t(void **, char *);
void sqlorat(void **, unsigned int *, void *);
// Forms Interface
Line 131: extern "C" { void sqliem(char *, int *); }
It seems like the compiler is generating c++ code but the gcc compiler is only compiling in cc mode. I've tried a number of options in the pcscfg.cfg file to no avail. I have tried the different options for the CODE=cpp in the pcscfg.cfg file but still get the same error and/or multiple errors. I have also tried to compile the oracle demo programs using the demo_proc.mk file and also get the same error.
The install of Oracle is fine. I can start the database and have created a needed user and tables but cannot successfully compile the pro*C code.

My proc is also compiling for cpp code but in the pcscfg.cfg file there is no "CODE=cpp"

How can I install ODM Java Code Generator in Jdeveloper 9051?

Hi, I need to install ODM extension in Jdeveloper 9051 but the html file with the instructions is in blank.
Someone know how?
Thanks
Javier

Install
Download ODMJDevExt.zip and extract the contents to <JDeveloper10G Home>\jdev\lib\ext (<JDeveloper10G Home>/jdev/lib/ext on UNIX), where <JDeveloper10GHome> is the directory where JDeveloper is installed, and launch Oracle JDeveloper 10g (9.0.5.1).
Note: ODM Java Code Generator is certified with Oracle JDeveloper 10g (9.0.5.1) only. Go to the http://otn.us.oracle.com for the Oracle JDeveloper 10g (9.0.5.1) download.
You must use Oracle 10g Release 1 (10.1).
If you patch the database beyond 10.1 release, be sure to update the odmapi.jar in <JDeveloper10G Home>\jdev\lib\ext (Windows) or <JDeveloper10G Home>/jdev/lib/ext (UNIX) to match the version that was installed in your database.

How to run the code generator

I urgently need to know how to run the code generator using creator. Can anyone assist? I cant find any tips in the forums.

I am following the procedure to create a new custom component (or extend an existing component) available at http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/writing_custom_components.html.
Part of the procedure says: you need to use the JSC to run the code generator based on sun-faces-config.xml metadata.

C Code Generator

お世話になっております。
C Code Generatorを用いて添付したようなVIを変換し、チュートリアルのようにmain.cを用いて実行しようとしたのですが上手くいきませんでした。
ｘ、ｙ、ｚに適当な値を代入して結果を見たいのですが、C言語の知識があまり無い為どのようにmain.cを書けばいいのかがよく分かりません。
この様な場合どのように書けばいいのでしょうか？
あるいは生成されたwhile.c、もしくはVI自体を変更しなければいけないのでしょうか？
教えて頂けるとありがたいです。
宜しくお願い致します。
添付:
while.vi ‏8 KB

g7tele 様
日本NI 技術部の冨田と申します。
この度はディスカッションフォーラムをご利用頂きまして、有り難うございます。
「上手くいかない」ということですが、もう少し詳しく教えて頂けないでしょうか。例えば、コンパイルエラーが発生するといったことはありますでしょうか。

Air QR code generator/reader

Similar Messages

Maybe you are looking for